Cloud Update: Error and auto unistall

Hi Team,
My PC wanted to do an update this morning for the cloud platform (Desktop). I said OK. It went through the update process and at the end it came up with an error. I didn't have time to chase this so I went cancel.
Cloud desktop has now looks to have disappeared and uninstalled its self!
Any thoughts

Hello. There is two way to solve this problem.
1) load adobe cleaner tool - (instructions and download links here http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) - run it with clean all option and make new install of cloud and all soft in it after installation. And be patient - with 40 Mbit internet channel and near top PC with i7-3770K 32 gb ram and fast SLC SSD - installation just Photoshop CC took 2 or 3 hours.
2) if all software is working fine just forget about this piece of buggy code.
Two weeks ago I finally made first option. And yesterday got same problem again. And im tired of it. Really tired. may be someone could make special lock on gas tank for all Adobe developers cars - and if they want to fill it with fuel - thay must call to service that they send someone with key to gas station. Until they couldnt make correctly autoupdate for cloud tool.
And else one block in engine, that will limit their cars speed to 30 kmh until they found how use 32 gb of RAM for ACR needs.

Similar Messages

I am unable to install the creative cloud update - error 43 comes up at around 77%

I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
Mylenium

AIR auto update error, and question about POST parameters

Hello,
I'm getting a Download Failed error in the AIR autoupdating process;
There was an error downloading the update. Error# 16822
I recall this working once, the very first time that I tried it.
My app.xml file contains this line:
    <version>12</version>
and my update.xml file contains:
<update xmlns="http://ns.adobe.com/air/framework/update/description/1.0">
<version>12</version>
<url>http:/players.biemedia.com/ooyala/Composer/Composer.air</url>
<description>12 - Bug fixes and prepopulating defaults for player creation screen</description>
</update>
Pasting the URL into a browser works.
However, this stuffresides on cloudfront. in the past i have noticed that if something tries to send post parameters along with the request, cloudfront will deny the request. Is it possible that the AIR app is sending POST parameters when hitting the download URL, and could this behavior be new in the last 6 months or so?
Any other ideas?
Thanks,
Gerry

Just Got The Solution for Error 16811 & 16816
Note Following things to avoide update error
No 1.>
You xml schema for update descriptor.xml in server should look similar to this
<?xml version="1.0" encoding="utf-8"?>
<update xmlns="http://ns.adobe.com/air/framework/update/description/2.5">
<versionNumber>2.0</versionNumber>
<url>http://localhost/SerialHunter/SerialHunter.air</url>
<description><![CDATA[
SerialHunter Version 2.0 by Rajendra Khope
This new version includes:
    * AutoUpdate
    * Enhaced UI functions
    * Ability to add providers
]]></description>
</update>
Note xmlns="http://ns.adobe.com/air/framework/update/description/2.5"
and versionNumber instead of version
Also make similar changes in appxml version field (in Burrito its by default versionNumber )
No 2>
if u are using code to display veesion number make sure it should look like:
var appXML:XML = NativeApplication.nativeApplication.applicationDescriptor;
var ns:Namespace = appXML.namespace();
pnlMain.title=appXML.ns::name+" v "+appXML.ns::versionNumber
Thats it...!
Rajendra Khope
bkrajendra at gmail dot com

Creative Cloud Update Error 205

Good morning.
I have had Creative Cloud Desktop app running smoothly until recently when I started to get the Error 205 while updating through the app. It always stopped at 12%. Additionally, I have uninstalled the app and gotten the same error as I reinstall it.
I have looked through the threads here where people are experiencing the same problem. This thread is often referenced: -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html. I do not have a firewall and I have tried tried downloading wirelessly and wired. Everything ends with the same Error.
What am I missing? And do I have the ability to chat with someone with my Creative Cloud membership? It seems that I do but I can't figure out how to get that ball rolling either.
I appreciate any insight you have.
Thanks,
Meredith

Thank you, John.
That is the link I've been looking at and I have no firewall or connectivity issue.
I'm trying the CC Cleaner Tool at the moment. I ran the cleaner tool but cannot figure out how to see the log so that I can verify whether not that has worked. I did try to reinstall Creative Cloud and am getting the same error.
How do I get to talk to someone directly for further troubleshooting?

Constant Creative Cloud update error

iMac with 2.93 GHz Intel Core 17 + OS 10.9.1 - I get constant notes that uploads are not possible, while on my macbook everything is okay, it seems - apart from LogTransport2 note I shall "kill" that programm. It's upsetting, really.
Premier Pro CC / Photoshop CS6 / Lightroom 4

Am travelling right now and not on my desktop-machine until tuesday.
I get no "cute little numbers" but a notification that CC can not update software and that I shall contact service. And that is just it. And here I am. Numberless.
The Logtransport2 issue is a nuisance I do not need to understand right now as I can work around it. It just would be nicer it wouldn't be there to begin with.

Creative Cloud update failures and resets

Today, my computer unexpectedly crashed. In order for it to repair itself, it had to "revert to a previous version". Doing so altered the Creative Cloud software that I had installed the day before. At first, it looked like it had been removed, since the Creative Cloud shortcut -- and the one I had made for the two programs I downloaded, Flash and Photoshop -- had disappared from my Desktop.
When I went in search of the files to launch the programs, I couldn't find them in Computer > Local Disk (:C) > Adobe > Flash CC/Photoshop CC where they had been before.
I opened Creative Cloud and saw that there were updates availalbe for these two programs. I thought this might improve something, so I tried to update.
Photoshop CC gets about 50% through the update and then fails. No matter how much I retry, the same thing happens. When I choose "Learn more" next to "Update failed", it gives me the following error message.
Clicking on "More Details" sends me here.
But none of the files here or in the sub-folder can be executed by my computer/
Flash, on the other hand, updated perfectly -- but when I click on the Flash launcher file, it gives me this message.
>>> NOTE: It occured to me that I should uninstall and reinstall the separate programs -- but when I open the "Uninstall a program" section on my Control Panel, it DOESN'T EVEN LIST Flash and Photoshop.
Through a convoluted series of attempts to fix the problem, I have deleted many of my Adobe files, restored them from the Recycle Bin, uninstalled the Creative Cloud from my control panel, reinstalled it, and still nothing seems to work.
I'm a freshman art school student, and I got this Creative Cloud program for free. I NEED the programs it offers. And I desperately hope someone can help me with this problem!

Hello SamuraiJon
Here is a doc that should help your issue for this error u44m1p7
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html
Let me know if this helps or not.
If you find that this resolves your issue or was helpful, could you please take a moment to come back to this discussion and mark the post as helpful. Doing so greatly benefits your fellow users
Thanks
Scott

Update error and i didnt back up data

i clicked "Download" for the iOS 8.3, everything goes great until it itunes banner says " Waiting for iPhone". THen i get a pop up saying "error (-1)" and they redirect me to the itunes page where it helps with the majority of the problems, but apparently not mine because if done everything that page says and it still ont update. Now that i try to turn on my phone, not plugged in, it tells me to plug it into itunes. Sadly, since my computer has low space as it is, i dont back up my phone so i dont want to restore it back into factory settings. Please help!

Your phone is in recovery mode and there is no option other than to restore. Any data still on your phone will be lost. If you have no backup to restore, SOL. Why aren't you using iCloud backups??

IPod Nano 7th gen - software update error and now not functioning

Hello,
I recently plugged an older 7th gen iPod Nano that I hadn't used in a while into my computer (Windows 7 operating system) and iTunes wanted me to let it update its software. I said 'yes,' not really thining anything of it, and as the software update was taking place, an 'unexpected error' occurred. Now my iPod will not turn on or respond or anything. It shut off while plugged into the computer and has stayed off and I am unable to get it to turn back on. It is totally dead, like the failed update somehow ruined my iPod.
The iPod itself was a little damaged - the LCD touchscreen was nonfunctioning due to water damage, and only displayed a white screen when on, but I could still 'shake to shuffle' and it would play all of my music just fine. Now the iPod will not work at all.
Is there anything that can be done or am I just out of luck here? Did the fact that the iPod was damaged have something to do with the failed update?
I'm kind of bummed 'cause the iPod still played my music perfectly....
Thanks for any help or insights anybody can give.

I should add 2 important points: 1) I have no trouble syncing with my PC, just in updating the nano software, and (2) Buried in some Apple reference I found mention of problems if the nano isn't formatted for a PC vs. Mac. It gives info on how to tell what the format is, but it's outdated (the menu choices are different). I believe it is already formatted for a PC because of an entry under Settings/About which says the Version is "1.0 PC". Tell me if I'm wrong. Also, it would help me if I knew the destination of the software download. Does it download directly to the Nano or to a temporary folder on my PC?

Trying to Remove iTunes software components because of 11.1.4 update error and using Windows 7 uninstall Apple Mobile Device Support does not work. Any suggestions?

Had error while updating Itunes to ver 11.1.4. I had 11.1.3.8 previously. Following instructions for Removing and Reinstalluing iTunes and other software components. Was able to uninstall iTunes and Apple Software Update, but attempts to do the same under Control Panel failed for Apple Mobile Device Support (ver 7.0.0.117). Directioons say to uninstall components in order given so I cannot continue until Apple Mobile Device Support is removed. Any suggestions?

Try reparing and then remove again if the repair is successful, otherwise move on to the next step. See Troubleshooting issues with iTunes for Windows updates for more information.
tt2

Itunes update error and vista

I installed the 7.5 itunes update and now when i try to open itunes vista tells me i need to update itunes. Just to be safe i uninstalled itunes and then reinstalled it from scratch but the same problem still persists.

just to update uninstalled again and tried to install itune 7.3 but it would not load the library i once had so i upgraded to 7.5 and keep getting an error message from windows telling me to update-which i have.

'Serious Error' and Auto-Save failure

I have several times encountered the 'Serious Error' dialogue, mostly immediately after attempting to insert an audio transition (crossfade) between two simple audio clips.
I have unsuccessfully attempted to research and fix the issue, so instead I have increased my auto-save frequency to every 5 minutes.
I had been working on a project for two hours or so before a serious error popped up. Auto-save dialogues popped up every few minutes. I restarted the program and found that the project had reverted to a state several hours old. Why is this?

I can't explain the cause, but I can suggest a fix.
http://forums.adobe.com/thread/1369232?tstart=0

CS5 update error and RAW opning file

I can't update my cs5.
I get error
Some updates failed to instaøø
There was on error downloading this update, please quit an d try again.
And i hvae try, but some problem every time
I use update from help meny in Photoshop
Have other queston about RAW
i cant open RAW file in CS5 Photoshop, and I have innstgalled the last plugin for Adobe.
Gunnar.

Print a picture wrote:
…Have other queston about RAW
i cant open RAW file in CS5 Photoshop, and I have innstgalled the last plugin for Adobe.
You need to specify exactly the camera make and model, your exact version of Photoshop and your OS, etc.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

QT7 gives codec update error and starts downloading .exe file on a Mac...

I have problems playing some .mov files on my Mac with QT X, it says I need QT 7 so I installed that, but then QT 7 comes up with an error: codec needs updating and it starts to download QuickTimeupdateKB337585.exe
I have Perian, Flip4Mac installed and also divx and xvid components in the /Library/Quicktime folder. How can I find out what codec I'll need and how do I install it in the QT 7 folder?

CS2 would run on older Macs. What are your system and OS specs like?
PowerPC® G3, G4, or G5 processor
Mac OS X v.10.2.8 through v.10.3.8 (10.3.4 through 10.3.8 recommended)
320 MB of RAM (384 MB recommended)
750 MB of available hard-disk space
1,024 x 768 monitor resolution with 16-bit graphics adapter
CD-ROM drive
Internet or phone connection required for product activation
Gene

Re: IPHONE update error and malfunctions

I just was informed that there was an update for IPHONE when I connected to Itunes and after a few error messages, it seemed to finally successfully update. However after my Iphone restarted, it now shows a picture of a connector cable and the symbol for Itunes. It also only allows emergency calls. Does anyone know how to fix this?

eastwest6566 wrote:
it now shows a picture of a connector cable and the symbol for Itunes. It also only allows emergency calls. Does anyone know how to fix this?
This means connect it to iTunes. It is in DFU mode and needs to be restored.

Software Update Error and Application connectivity problems

Hi. Hoping someone can help me with issues I've been having since we added a wireless access point to our network at home two weeks ago. I'm sharing a network with two pcs, a pc laptop and a ps3. All of which are working fine either using the wireless access point or ethernet through our router.
I have a macbook which is picking up the wireless fine, apart from a few applications. The biggest problem is that software update isn't connecting. I get a message telling me there is a networking error: NSURLError Domain - 1100. I go through the network diagnostics and it tells me that my connection is working correctly.
Another (less worrying but annoying) problem is that some widgets (facebook, wikipedia, translater etc) are not picking up the connection either. Facebook iphoto exporter also doesn't work. There is no in-built firewall in the access point and I haven't changed any firewall settings on my system (which was working perfectly with the ethernet connection). All I changed was the DNS server address.
The only time I have used airport previously is in the library at my university, where I needed to use a proxy address. I'm wondering if this may be interfering with my connection settings now, but am unsure of how to change the setting around. I'm a new mac user and this is the first issue I've had issues. Any help/suggestions are thoroughly appreciated.
thanks.

I'd been having this problem for the past few weeks (causing Software Update to fail with NSURLError -100 and the iTunes radio service to fail) and just fixed it myself.
For me the issue had to do with proxy settings in the browser versus proxy settings in System Preferences. For example, if you run Tor/Vidalia with Firefox, the browser has its own proxy settings that get changed when you activate Tor. But if you use Safari or anything else to set up the proxy, it's the network settings under System Preferences that get affected.
To check this, go to (Apple menu)>System Preferences...>Network, then choose whichever network interface you're currently using. If the lock icon in the lower left-hand corner is locked, click on it and authenticate with your password. Now click Configure... and choose the Proxies tab.
On my machine, I have "Configure proxies:" set to "Manually" (I've never used the other option, "Using a PAC file", so if you have that set I'm not sure how to debug it). Now look through the items in the "Select a proxy server to configure" panel. If there is anything checked there, it should be for a specific reason. If something is checked and you don't know why, try unchecking it.
Finally, click on Apply Now (giving your password again if prompted), close the System Preferences dialog, and try Software Update again.
This solved my problems (I had been fiddling with a local proxy for OS X Mail and Thunderbird). Your mileage may vary. Give that a shot and report back if it helps (or if it doesn't).
/HJ

Cloud Update: Error and auto unistall

Similar Messages

Maybe you are looking for