Cloudy theme 24 Template region width not responding to style width change

Hello
I have a question regarding templates and themes.
Firstly I was using theme 20 traditional blue and all was ok.
Page template “2 level tabs with left sidebar”.
I had a page with a tree in the left side bar region.
Within the region definition in the attributes section against region attributes
I included the following style="width=300px;" which increased the width of my tree so none of the text was cut off.
All working fine!
Then I was asked to move to the “cloudy” theme 24 which scrambled my tabs and layout but with a bit of work I sorted this out all but the tree region.
The problem is the tree region always renders at a certain width even with the style code as before in the region attribute specifying a width nothing happen.
Any ideas on what is happening here?
Edited by: PolarWarrior on 02-May-2012 01:09

I have tried using 150px 250px 350px and the width increases and then stops
the view source shows me the following when I use 100% the ffffff id is mine input via the screen for testing
<section class= uRegion clearfix id= ffffff style=width:100%;> (quotes removed so it display correctly).
I have checked both templates for the page in each theme and I cannot find any references to #REGION_ATTRIBUTES# #REGION_STATIC_ID# in the templates.
the view source of the pages is quite different in each theme

Similar Messages

  • Firefox is already actif but does not respond. and even after changing the default properties the problem comes back (Read-only)

    everytime I close Firefox, it select the option "Read-only".
    I stop the proces via Task management and then I can start Firefox again. I close it and the "Red-only" option is back again.

    Do you get this error only after closing and restarting Firefox or always?
    In case of the latter:
    Do you still have a default profile and is the profile as you see in the profiles.ini file marked as "Default=1" still present?
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Try to delete the profiles.ini file to force Firefox to create a new profiles.ini file and a new default profile.
    *http://kb.mozillazine.org/profiles.ini_file
    *https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
    *http://kb.mozillazine.org/Profile_in_use

  • Logic not responding when saving or changing settings & Can't record audio

    I have just started to use Logic for the first time (installed it a month ago and now trying to use it).
    I have the latest version of Logic, OS X and have a MacBook Pro.
    I do not have any external hardware or plug-ins installed.
    PROBLEM:
    Whenever I try to save or save as a song (even when there is no MIDI or Audio in the tracks) the colored pinwheel spins forever.
    I also was trying to figure out how to record audio. I discovered that there was no path for recording audio which might be the problem why I couldn't get it to record (see below), and when I clicked the select path button it also froze on the spinning pinwheel.
    Audio Recording Problem:
    I set one of the default Audio tracks to Input 1 (built-in microphone) and I see the monitor responding to sounds, but when I turn on the record button on the track and then click record, the mic is still working but nothing is recorded in the track. When I open Garageband and record it works perfectly fine.
    Help?

    I had many problems with my Mac G5 2.7 refurb/Logic 7.2.1 when I first got it back in March. Although my problems were different than yours some things I remember doing that helped:
    Trashing Logic's preferences fixed a situaution where my Logic windows were flashing randomly and Midi info was corrupted causing my Mackie Control Universal and my Korg Triton to freak out Logic.
    Repairing disk permissions because 2 times Logic did not totally install correctly. Yes I reinstalled Logic at least 4 times to figure out why I was having freezeups system wide.
    Working closely with Apple Care documenting my problems and finally getting my local Apple store in our local Mall to change out the motherboard, dual processors and optical drive. Yes essentially a new computer. Since that time I have not had one system wide freezeup (any wood around here)
    or major problem.
    AT one point running the "Quick Test" from Apple's startup disc showed a Bad RAM chip. Again not related to you but running the test could show something.
    I have 2 issues left to fix - Logic 7.2.1 for me has a transposition problem. Midi tracks will show up after I open a song file transposed down a step. The fix is to reboot Logic which is a pain. 2nd - Annoying beep coming from my power supply. Beep is audible in studio near the tower and is also in the audio chain coming out of speakers. No fix yet but again I'm working with Apple Care.

  • Templates pages do not retain .css styles

    dwcs4
    I have created a template, and have about ten pages using it, the problem is every time I update the template the individual pages detach from the .css
    and I have to manually re-attach them all every time.
    Hoping there is some thing obvious happinging here.
    Thx
    Brad

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Marquee tool width not equal clipboard image width

    I'm really stuck with this issue and would like your help.
    I select an area with the marquee tool, lets say 122 height x 55 width. Then I either edit / copy or Ctrl + C.
    When I copy the area into a new file, the photoshop suggested file size is always 122 h x 51 w. Even if I make the new file size 122 height x 55 width, the copied area is only 51 px wide.
    This only occurs sometimes and I can't figure out why... Any help greatly appreciated.
    Thanks!
    Chris

    Hello,
    thanks for the reply. I only have one visible layer.
    Here the screenshots. The width in the Marquee selection area is 39px. Yet photoshop wants to create a new image with width 23px...?

  • Hi Everyone! My USB Keyboard allows me to log in and type my password, however once logged in I am unable to use the keyboard, the keys do not respond - have I unknowingley changed the setting and how do I fix it?

    HI All, as above, VERY NEW and frustrating issue........
    My USB keyboard works fine to allow me log into a profile, but once in the keyboard then doesn't work whatsoever.
    Please help?

    in the Keyboard pane of the settings there is a button at the bottom left that says change keyboard type, that walks you through the process if Mac cannot find your keyboard

  • How do I Place Two Or More Template Regions Side by Side?

    How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
    Maybe I need to know how to place two or more template regions side by side?
    Can you insert a template into a table?
    How do you insert a template within the main template along side a region within the main template?
    Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
    Thank you in advance for any help that you can offer me.

    How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
    Template regions are not layout regions.  They do not add any structure to your page, and only provide a way to add content to whatever HTML structure contains the template region.  So - you need to make your Template's HTML provide the space.
    For example, you could have a three column, one row table with an editable region in the left/right cell.  The exact answer, though, will depend on your page's layout and where you want the editable regions to be placed within that layout.
    In addition, you say "place two templates side by side" as if the regions were the templates.  That's not correct.  There is a template file, which contains editable regions.  Thus, you could not place two templates side by side.
    Can you insert a template into a table? 
    See the answer above.  You can place an editable region inside a table.
    Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
    I bellieve you are very confused about what templates are and how to use them, and so I strongly suggest you read DW's F1 Help about templates before going further with this project.

  • Problem with Youtube and Flashplayer : some options are not responding anymore

    I have a very strange problem since few days only on Youtube (other famous flashvideo websites are working without problem) I tried many things already without success.
    I can still play videos on youtube, excepted the buttons under the player are not responding AT ALL. I can still see them but it's not responding (or for exemple when Im going on the youtube player "Sound" icon the bar volume doesn't appear)
    I tried already to uninstall flashplayer and update it to the last version (10...38) but no changes. I have the same problems on all browers (IE; Firefox and Chrome). I also reset all Firefox and IE without success. Reinstall Java. And I have the last drivers for my graphic ard AMD. 
    Here is a few pics to show my problem : 
    You can see clearly that the button for resolution doesn't appear at all. 
    Picture of my youtube player : 
    on Firefox :
    http://imageshack.us/photo/my-images/607/firefoxu.jpg/ 
    on IE
    http://imageshack.us/photo/my-images/225/29761205.jpg/ 
    Quite strange also on IE you can see that there is a kind of bar who seems to block me the access to the control of the youtube player icons : 
    http://imageshack.us/photo/my-images/812/ie2q.jpg/ 
    Im on Windows 7 64Bits, but i'm using the 32Bits version of Firefox and IE, I tried also to turn OFF my Avast Antivirus and my firewall. But no changes. 
    If anyone has an idea, i would really appreciate because even if i can still watch video, i cannot change the audio volume of it and change the resolution or even activate the google subtitles options. The only icons who are responding on the youtube players are the two on the right (to enlarge the screen). 
    Regards, 
    Yann

    Yamoona wrote:
    Here is a few pics to show my problem
    Images are good to document a problem, butI don't see any images in your post.  Use the camera icon to insert images into a post.

  • 10.7.4 - Applications Not Responding & WiFi

    Hoping someone can help as I've been experiencing the same problems since installing the 10.7.3 in February.  I have an iMac (2.7 GHz Intel Core i5 - OS X 10.7.4) only 12 months old.  When I installed OS X version 10.7.3 I noticed that a variety of applications kept freezing and I would have to force quit them as they were "not responding".  The applications varied from itunes, word, excel, disk utility, and so on.  It didn't seem to discriminate.  I also noticed that the wifi kept dropping out and was rarely detected by my smart phone (not problems with wifi connectivity on phone).  The other problem was that I couldn't restart the computer or even shutdown as it would get stuck on a white screen.  I would have to turn off with on/off button.
    I installed the 10.7.3 Combo with some difficulty as it kept freezing as well.  It seemed to help for a day but then the same problems came back.  Yesterday I installed the latest version update 10.7.4 hoping that this would solve all my problems but unfortunately I am still experiencing the exact same problems.  I'm at a loss and would appreciate any suggestions.
    Thanks

    Backup your files then do the following:
    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
    Reinstall any third-party applications from scratch. Be sure you have the latest versions and that those versions are compatible with Lion. If not sure then do not install them. Do not install any anti-virus software. Be careful with plug-ins such as third-party preferences or application add-ons unless you know they are compatible with Lion.

  • It's about apple care for macbook pro 13", i'm following their registration process and at the 3rd step(final) the page is not responding not even redirecting for registration conformation! what to do with it?

    Need help, or else will lost my Rs.15k.

    It could be as simple as a glitch with their server; but, we don't know for sure, so I'd suggest calling Apple (800-275-2273 in the US) and telling them that you want to  register Applecare (tell them the website is not responding). You have 364 days from the date of purchase of your computer to register.
    What do you mean by "lost my Rs.15k."?

  • CF 7 cluster does not respond to configuration changes

    I am evaluating the clustering capabilities of CF 7 in order
    to upgrade our current CF6 + ClusterCats cluster.
    I installed CF7 (enterprise edition – multiserver) in
    two physical servers (Win 2003). On each server I created one
    instance of CF and successfully registered the remote instance on
    each server. Then, I configured the cluster on the first server,
    selecting the weighted random algorithm for load balance and
    session replication. Then, I used the webserver configuration tool
    to bind the cluster to each IIS server.
    The cluster worked properly, balancing the load between the
    two cf instances, but when trying to find a way to temporally
    restrict the load on one server for maintenance purposes I found
    that the cluster does not respond to cluster configuration changes.
    I changed the load to 0-100% using the coldfusion administrator
    interface but it did not work. The cluster still sends requests to
    the “restricted” instance. I even eliminated that
    instance from the list of instances that integrates the cluster,
    but it did not affect the behavior of the cluster. The eliminated
    instance still serves request from the cluster. I even eliminated
    the remote instance register and nothing… the cluster still
    balancing the load between the two instances that originally
    integrated the cluster.
    I do not understand how this is supposed to work. Does the
    cluster configuration interface works only when creating the
    cluster? When the changes in the cluster configuration performed
    from the CF admin interface should be reflected by the behavior of
    the cluster? What is the recommended procedure to temporally
    restrict one instance from the cluster without stopping the
    service?
    I appreciate your help
    Eduardo

    Thanks for the information Jochem. I am afraid that these are
    not good news. If I have to restart the webserver in order to
    change the load balance, some requests in progress could be lost.
    My current configuration is composed by two physical severs,
    each one running a web server and a coldfusion instance. We balance
    the load between both webservers using hardware load balancing.
    This is the procedure that I have to follow in order restrict one
    instance without loosing any request:
    1.- Change server weight using Coldfusion admin interface
    2.- Configure hardware load balance to restrict server 1
    3.- Restart webserver at server 1
    4.- Configure hardware load balance to enable server 1 and
    restrict server 2
    5.- Restart webserver at server 2
    6.- Configure hardware load balance to enable server 2
    A similar procedure should be followed in order to enable the
    restricted instance. I know that I can do it for 2 servers; but,
    how is it handled in larger clusters? Is there a better procedure
    to restrict one instance without missing requests?
    Eduardo

  • JTextField not responding when app jar'd

    I have a few JTextFields on a JWindow which was working when I was designing the app. I was using VAJ3.5. Once I jar'd with jdk1.3.1 the first textfield would respond when I "java -jar My.jar" and the 2nd would only gain focus when i would click to another program and I would come back to the jar. And if I double clicked then both texts would not respond. I then changed to a JDialog, and everything works fine now.
    I would rather use JWindow but im at a loss to explain why this would happen. Can anyone shed some light?
    Thank you for your time

    Try this basic troubleshooting fix:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
    User/Home/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iDVD folder.
    3 - launch IDVD and try again.
    NOTE: In Lion, Mountain Lion and Mavericks the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    If you're running Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    It the above doesn't help Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try iDVD there.  Then reboot normally and try again.

  • Photoshop CS3 doe not respond.

    Hi,
    I am using Mac OS X 10.5.8. Powerbook G4.  I can open PS CS3 but once I click to open a file, it hangs and the program does not respond.  I tried changing the performance memory usage to 50% but that did not help.  I have also uninstalled and reinstalled the program too.  I'm still having a problem.  Any suggestions?

    What OS/Version are you on?
    Did you try restoring all your prefs? http://adobe.ly/PS_Prefs

  • The drop drop down box from Yahoo that says "Do you use the Yahoo! Toolbar on multiple computers? will not respond to clicking on it. It Stays in the drop down position covering other tabs and makes them unuseable.

    this box with three options: learn more, save to my Yahooa1 ID, No thanks, just save to this computer, will not respond when any option is selected. It will not go away. It covers other tabs making them useless.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • My digitizer is not responding however i have loads of imessages. I tried to go onto my ipod touch to look at them but when i updated to ios7 it had not been signed in to imessage. Is there a way i can get imessages sent to iphone to load on my ipod?

    My digitizer is not responding however i have loads of iMessages which i can see because the lcd screen is visible but touchscreen is brokenI tried to go onto my ipod touch to look at them but when i looked it had not been signed in to iMessage which was after i received the iMessage on my iPhone . Is there a way i can get imessages sent to iPhone which i currently cannot access due to the touchscreen being unresponsive  to load on my iPod iMessage which is connected to my phone number as well as my email?

    maggielou wrote:
    I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed.  However, a few of the recent pictures have shown up on my phone.
    IHow could I get these from my MacBook to my phone?
    Thanks again.
    When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups.  You can't view the backups.
    Look at the two links I provided.
    You still didn't answer any of my two questions I asked.

Maybe you are looking for