Clq status shows quorum server offline even though the clq service is runni

Hi,
In a 2 Node + 1 QS sun cluster 3.2 cluster, clq status is showing quorum sever offline even though the clq process is running on the quorum server. to make the quorum server online, i have to either remove and add the quorum server from cluster, or incase if there is a failure on any one of the node's both th nodes will reboot and once both joined to the cluster, I can see clq status showing quorum server online!!!
Why is the quorum server going offline automatically?
Any help would be highly appreciated
Many thanks in advance
Ushas Symon

Hi,
I asssume you mean the scqsd process is running on the QS, right?
A QS is shown as offline, it the monitor could not reach it when it last tried. This is usually due to a networking problem.
If you issue a clq status, the monitor checks again and if it can reach the QS will change its status back to online.
If this does not happen, check your logs, what kind of error message showed up.
Does clqs show on the QS show the correct information?
It is obvious, that if a node dies and the QS has been offline prior to the node death, that the other node will die as well due to lack of quorum, i.e. it has less votes than needed. You seem to have a basic networking problem or something is really wrong with your QS.
Regards
Hartmut

Similar Messages

  • Clq status shows quorum server offline eventhough it is online

    Hi,
    I am facing a problem in my cluster that when I bring all the three nodes in a cluster (2 app-nodes and one quorum server) at almost the same time, the clq status on any of the cluster nodes is showing quorum server as offline. when I do the clqs show on the quorum server, i ge the below output.
    clqs show
    === Quorum Server on port 9000 ===
    --- Cluster beacluster (id 0x4916625B) Reservation ---
    Node ID: 1
    Reservation key: 0x4916625b00000001
    --- Cluster beacluster (id 0x4916625B) Registrations ---
    Node ID: 1
    Registration key: 0x4916625b00000001
    Node ID: 2
    Registration key: 0x4916625b00000002
    this is cluster 3.2
    any inputs will be appreciated
    Thaks in advance
    Ushas Symon

    Hi, this is solaris cluster 3.2u1..
    I got the quorum server online by
    # clq status
    --- Quorum Votes by Device ---
    Device Name Present Possible Status
    rac1 1 1 Offline
    # clq add -t quorum_server -p qshost=xxxxxxxxxx -p port 9001 rac2
    # clq status
    --- Quorum Votes by Device ---
    Device Name Present Possible Status
    rac1 1 1 Online
    rac2 1 1 Online
    By just adding one another QS both the QS status came online !!!!!!!!!!!!
    no IDEA, what is happening...
    anyways I have deleted the second QS by #clq remove rac2 and #clq reset
    now it is fine..
    Thanking you all
    Ushas Symon

  • I am trying to upload files to an Apple hosted feed on KSU iTunes U (unpublished site). The file size shows as 2 GB even though the files are 50MB. The upload stalls and fails. Address:

    I am trying to upload files to an Apple hosted feed on KSU iTunes U (unpublished site). The file size in the Feed Editor shows as 2 GB even though the files are 50MB. I am using Safari on Intel Mac 10.5.8. at Kennesaw State University. Any help would be appreciated.

    This is the second day. I tried using a new Apple feed to test. Still not working. I uploaded a 50MB mp3 file. The first time the upload failed. The second time the file showed that it was uploading a 2 GB file. It has been about 20 minutes now and shows "3.5GB of 2.0GB 178% Completed". Now it has started uploading all over again - it is now showing 399.4MB or 2.0 GB - 19% Completed. I dont know if this will keep looping - but I am going to Cancel.
    Please let me know what other information do you need from me. Definitely need some help with this!

  • ITunes suddenly not showing all my content, even though the folder does

    All of the sudden, iTunes stopped showing all of my content. I have over a hundred movies and several TV shows and all of the sudden, some of the newer stuff that I recently ripped or bought from the iTunes store is no longer showing up in iTunes.
    It is still in my iTunes folder however and open and accessible if I click it in Finder. This however is not a good solution as I don't know what is missing from the list and how this ridiculous issue happened.
    I am furious. I spend a lot of time adding to my iTunes library for my Apple TV and suddenly, and for no reason that I can discern, content is not showing up, no matter what I do.
    I recently moved my iTunes library to a 2 TB Time Capsule and took it off my internal drive, but this worked fine. For a while iTunes kept losing the library, but it no longer asks for it. It points to the right place, plays the content it chooses to see from the right place, and ignore others even though it showed them before and still has them in the library.
    I am beyond confused. Can anyone help?

    Check on the Summary tab of your iTunes sync settings that you checked "Sync only checked songs and videos" and that you checked "Sync Music" on the Music tab.  Also confirm that your computer authorized for the Apple ID used to purchase this music (in Store>Authorize this computer).

  • In iphoto while using the slideshow and adding music the itunes library can be picked but none of the music files show up to choose even though the itunes library has pleanty of music in it

    in iphoto slide show when itunes music is selscted it doesn't show any music files available within the drop down menu, how do i get the itune music pfiles into that program (iphoto)

    Hi 845greening123,
    If you do not see your iTunes library when attempting to add music to your iPhoto slideshow, follow the steps outlined in the last section of this article -
    iPhoto '11: Add music to a slideshow
    See the section titled If you don’t see your iTunes library in the Source pop-up menu:
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

    Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

  • I am trying to go onto my sky go on the ipad but keeps coming up that it is offline even though it has wifi

    I am trying to connect to my sky go to watch  something on my ipad but it keeps coming up its offline even though i have a full connection of wifi?

    I went through everything mentioned in the link you posed and nothing detailed there resolved the problem.
    The Profile folder didnt exist so I created it. Made sure the perms were good and that it was not read only.
    There are no default folders appearing under the profile folder when I start Firefox.
    I have Firefox installed to my E drive.
    Nothing happens. The process appears in the task manager but no application shows up.
    Cant start it in safe mode, cant run the profile manager.

  • I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

    I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
    When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
    Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
    Please help!!

    I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
    I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
    I was afraid of rebooting and possibly losing track even of the ghost.
    I did not try EasyFind - I'll keep that in mind next time.
    Thanks for all the comments.

  • My ipad is no longer showing all my videos, even though i have the option set to show all, even those that are in my cloud. I can't do anything to get all my videos to re-appear. any help?

    My ipad is no longer showing all my vidoes, even though i have the option set to show all, even those that are in my cloud. Any suggestions??

    Close the videos app and launch it again.
    To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    if they still don't show up after you launch the app again, try resetting the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Contact photos are not showing up in Mail message list, even though the message will link to the contact card in Address Book with the photo in it.

    I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.

    I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.

  • My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling from the install DVD - but no go: no longer compatible, evidently.. What to do?

    My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling the Mail program from the install DVD, but no go; apparently that two-year old Mail is no longer compatible with my up-to-date Leopard. I tried deleting the account (hotmail) from Mail and setting up a different account (Yahoo). After loading all the inbox two things happened: first, I still couldn't send, and second, when I closed the Mail window the whole inbox then disappeared and doesn't come back. Although I couldn't reinstall the Mail program from the install DVD, would it still be possible to reinstall the whole system from that DVD? If I do, will I lose files or will there be another problem since that DVD is now over two years old?
    Thanks for any suggestions; they will be much appreciated.
    P.S. I've just noticed that now I can't change the desktop picture: I go through the motions in Preferences, but the new picture doesn't appear on the desktop. Is there a systemic problem?

    You are waiting for an apology to something that happened over a year ago? Really? This is why there is a manager in the store. You have a problem with an employee you speak to the manager. Just like you did on the phone. You would have gotten your apology in July 2013.
    Here is the information about your upgrade fee.
    Upgrade Fee
    It is because when you have a problem you (customers) go running to the store and want to take up the time of the reps to fix it. Other carriers have third parties that deal with technical support and those locations are few and far between. VZW provides this directly through their stores. Also, when you subsidize a $650 and pay $200 VZW has to pay $400. Your monthly service fee doesn't begin to scratch the surface of paying that back. Not with all the money that is put into the network and its improvements.
    Then over a year later you get someone on the phone who apologized and offered to waive the fee on your phone and you didn't take it? That offer won't come down the pike again.
    One thing you should know is that all these employees are people and as such they sometimes come off cross. I doubt that you speak to everyone so sweetly all the time. Cut them a little slack and put this whole thing behind you after 15 months. Either upgrade with VZW or move on.

  • I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

    I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

    Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
    William B. Kohn, Esq.
    General Counsel
    Paul V. Profeta & Associates, Inc.
    769 Northfield Avenue
    Suite 250
    West Orange, New Jersey 07052
    (973) 325 - 1300
    (973) 325 - 0376 (Facsimile)
    [email protected]<mailto:[email protected]>

  • Songs are not showing up in playlists even though they are there

    songs are not showing up in playlists even though they are there

    If you've downloaded them on the iPad then they should be in the Videos app - iTunes on the iPad is just the iTunes store (the Purchased tab shows what content that you can re-download from the store and rentals can't be re-downloaded, and non-rental films can only be re-downloaded in some countries).

  • Not to show the detail records even though the mater records are existing.

    Dear Oracle
    I would like not to show the detail records even though the mater records are existing. Is there any block preperty I can set?
    Thanks

    I don't know the reason why you would want to do that but if you do not want to any record in the master block in
    a master-details format, then you could achieve this by setting the WHERE clause property in the block.
    e.g., master block DEPT (base table DEPT) and detail block EMP (base table EMP)
    table DEPT is as follow
    dept_id (pk)
    dept_name
    table EMP is as follow
    emp_id
    emp_name
    dept_id (fk)
    then you can set the WHERE clause in the DEPT block as follows
    exists (select 1 from emp a where a.dept_id = dept.dept_id)
    hope this help

  • On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

    Hi Peter,
    Thanks for participating in the Apple Support Communities.
    It sounds like the Mail app on your iPad mini is showing that you have over 500 unread email messages, but your inbox is actually empty.
    There are several steps I'd use to troubleshoot this situation.
    First, restart your iPad to see if it clears up the symtom:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    If this doesn't correct the behavior, try removing and re-adding the affected email accounts next:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Tap the affected email account.
    Tap Delete Account.
    Add your account again.
    If the same thing happens after re-adding the account, you may need to use the steps below to reinstall iOS. You may want to back up your iPad to iTunes before completing this step.
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    From:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    All the best,
    Jeremy

Maybe you are looking for

  • 2.5" external USB hard drive not recognized by my iMac

    I have a small 2.5" external USB hard drive that my intel iMac will not mount or see. My 12" G4 Powerbook sees it fine and it is formatted in Mac OS Extended. My iMac is bootcamped and XP on my iMac sees the drive but not OS X Tiger on the iMac, (wie

  • Printing a filled in form

    Hi; I want the visitor to be able to fill out and submit a form and then be able to print just the form with no other page elements. how is this done ? Thanks; Pat

  • CUCME 4.0 and Video

    Dear all, 1. I want to organize SCCP 2 SCCP video call between to IP Phones: - CUCME 4.0(0) - IP Phone 7941 SCCP-based (load file is SCCP41.8-3-3S) - IP Phone 7961 SCCP-based (load file is SCCP41.8-3-3S) - All are living in the same subnet 2. I've co

  • Reclaim unused space in tablespace

    Hi, I have a tablespace with a size of 150GB, and after 2 years the company told me the retention period for our data is only 4 months and after deleting the data I'm only using 40GB out of the 150GB size of the tablespace where my table is located.

  • Using php/mysql for calculations

    Hi guys, Im experimenting with calculations on a site but im not sure whats the right way to go about it. the result im looking for is this,, Im setting up a personality test on the website where the questions he answers should classify him into one