Clscfg.exe - Application error during 10g install on W2K3

I get 2 installation errors when installing 10g (software only install) on Windows 2003. Both appear to be directly related to the fact that clscfg.exe does not execute. I receive the pop up titled "clscfg.exe - Application Error" containing the text:
the instruction at "0x77bd4ece" referenced memory at "0x00000000". The memory
could not be "read'. Click on "OK' to terminate the program.
Has anyone encountered this? Know a workaround?

I have exactly the same problem under Windows XP. There seems to be a bug that looks very simular to the error we have, and there is a patch for it (bug 3555863), but the patch does not work, because you need to execute clscfg again during the patch execution, but clscfg craches whenever I try to execute it.
So, I do not know a workaround yet. Did you find out anything in the meantime?

Similar Messages

  • I've got error message " CTSvcCDA.exe application error " during insall MediaSour

    I need help anybody who has soultion about this error .
    When I install Nomad Explorer & MediaSource, I had two error message .
    first, in case of nomad explorer, "security.exe application error"
    seconde,Mediasorce, "CTSvcCDA.exe application error"

    Try disabling Protected Mode.  But since you cannot even open Adobe Reader by itself, you can do it via the Windows registry: download, unzip, then run the registry script from https://files.acrobat.com/a/preview/441a5fb2-7a82-443d-9632-9a639692a565

  • Idriver.exe -application error apprears when instaling itunes 6

    ok i try to install itunes 6 and when it meant to bring up the installshield wizard it will apprear in the taskbar but nothing is actually there. a while after it the following message appears
    Idriver.exe application error blah blah blah the memory could not be "read"
    plez help

    hi Madam!
    hmmm. i couldn't turn up anything specific at event ID:
    http://www.eventid.net/display.asp?eventid=26&eventno=2271&source=Application%20 Popup&phase=1
    (i'm not a subscriber, so i can't follow up their "M" links ... not that there was anything specific to the IDriver.exe anyway.)
    hmmmm. if you
    b do
    start running into problems, and you've got the time, it may be worth getting an install log to the moderators:
    Gayle B, "If you are experiencing installation issues...", 06:20pm Oct 12, 2005 CDT
    still at the early stage of troubleshooting these, i'm afraid, so i can't give you much more feedback than this. maybe keep checking in every day or so to check on any developments?
    love, b

  • Windows 8.1 - "explorer.exe - Application Error" during shutdown process

    Hi,
    After I upgrade to Window 8.1, i get "explorer.exe - Application Error" dialog every shutdown.
    It contain: "The instruction at 0x74fd40b9 referenced memory at 0x00000000. The memory could not be read.
    Click OK to terminate the program
    Click on CANCEL to debug the program."
    (Sorry, my account can't post link or image. So i can't show you the picture capture)
    When I had used Window 8, it didn't happen.
    Please help me to solve this problem.
    My machine is: HP ENVY DV6 7214nr.
    Thanks,
    Tan Nguyen
     

    I am having the issue when shutting down windows 8.1.  Did not occur before the update with Windows 8.  At shut down, Pop up displays for only a few seconds.  HP Envy I7. 
    Explorer.exe - Application Error
    The instruction at 0xa73640b9 referenced memory at 0x00000000. The memory could not be read.
    Click on OK to termintate the program.
    When I start the PC, and shut it down after a few minutes of running, this error does not occur.  Only after the PC has been on for awhile and I have used several programs.
    And for those of us unfamiliar with creating a Reg entry, the instruction are not very clear.  Once I create this text file...what do I call it and where and how do I insert it....?
    UPDATE Problem fixed:  I followed the suggestions of a Windows 8 clean boot from Microsoft.
    After going through the running applications one by one, I finally isolated the problem on my HP Envy to the Bluetooth Application.  I disabled the Bluetooth task in Startup and made sure it did not load. Afterward, no more Explorer.exe - Application
    Error when I shut down the PC.  This program is a Ralink Bluetooth driver and exe. program running on startup.  I am not sure if HP has offered an updated driver for it as of yet..... 

  • Openmotif error during 10g install.

    I am trying to install a Oracle 10g database on top of a RHEL 3 operating system. The operating system is fully patched. I think that may be the problem, but would like some verification on that. The openmotif version listed is openmotif-2.2.3-3.RHEL3. Install is looking for openmotif-2.2.2-16. It, of course, fails. I assume I must somehow rollback to the previous openmotif version or is there a newer download of 10g that will work with my current version of openmotif? Another machine has 10g installed on it, but I know it was installed before the most recent openmotif version was installed. It is still working even with the new openmotif. Thanks for any help. I went to the Red Hat Network site and looked at openmotif packages available and it does not list the 2.2.2-16 version as available.

    I have exactly the same problem under Windows XP. There seems to be a bug that looks very simular to the error we have, and there is a patch for it (bug 3555863), but the patch does not work, because you need to execute clscfg again during the patch execution, but clscfg craches whenever I try to execute it.
    So, I do not know a workaround yet. Did you find out anything in the meantime?

  • Ora-01031: Insufficient Privileges error during 10g install on Suse 9.1

    I have tried installing Oracle 10g on Suse 9.1 Professional several times. Although I have tried to carefully follow the instructions in the installation guide, I get the following error.
    When the Database Configuration Assistant start during the initial installation, I receive the error -> Ora-01031: Insufficient Privileges.
    I created the oinstall and dba group according to the installation guide and made oracle a member with oinstall being the primary group. I also ran -> chown -R oracle:oinstall -> on the Oracle_Base folder to which I want to install the software and oradata files. Similarly, I ran -> chmod -R 775 -> on that folder. During the install I ran the script -> oracle_base/oraInventory/orainstRoot.sh -> during the installation when prompted.
    I would really appreciate any help that any of you could provide. Thank you so much in advance.
    -Daniel

    I'm logged in as oracle when I perform the installation but as soon as the database configuration assistant tries to create the database I get this error. I had made oracle a member of oinstall and dba just as it was desribed in the instructions. (At one point I even tried giving oracle root, which didn't seem to work either. I have since reinstalled the OS.)
    Thank you for helping me with this!

  • 9cc: MsiExec.exe Application Error Memory Could Not Be Written on Install

    During installation the following error occurs:
    9cc: MsiExec.exe - Application Error
    The instruction at "0x3ff084a2" referenced memory at "0x00000000". The memory could not be written.
    Screenshot:
    http://img196.imageshack.us/img196/724/qterror.jpg
    I followed the instructions here:
    http://support.apple.com/kb/HT1926
    Completely removed and cleaned up Quicktime and tried a reinstall, and it does the same thing.
    The install completes, but then Quicktime does not funciton.

    You probably just have a old msi file from a previous QT installation that needs to be removed.
    I'd remove QT again from the add\remove control panel. Then do a search of the computer and remove any left over files or folders that the uninstall didn't get, including QuickTime qts and QuickTimeVR qtx from C:\WINDOWS\system32.
    Then run this program to remove any old QT installer information and give it another try.
    http://support.microsoft.com/kb/290301/

  • We installed  the Acrobat Reader 11.0.09  on Citrix enable Windows 2008 server  a month ago , it was working.  starting from this weeke we are receiveing error mesaage   AcroRD32.exe - application error  (Instruction at 0x...bad8  bad referenced memory at

    We installed  the Acrobat Reader 11.0.09  on Citrix enable Windows 2008 server  a month ago , it was working.  starting from this weeke we are receiveing error mesaage   AcroRD32.exe - application error  (Instruction at 0x...bad8  bad referenced memory at 0x....bad8 The memory could not be written  Click ok to terminate the program)
    Instruction at 0x...bad8  bad referenced memory at 0x....bad8
    The memory could not be written
    Click ok to terminate the program

    Hi SUBRAMANIAN,
    Are you still facing this issue? It seems to be conflict to me.
    Are you using any third party plugins with Acrobat? Try disabling and to use it again.
    Regards,
    Ajlan Huda.

  • Just installed reader.Have windows 8.1 Lenova. cant open Reader or pdfs without error: AcroMissingCompWClass: AcroRD32.exe  Application Error.

    Just installed reader.Have windows 8.1 Lenova. cant open Reader or pdfs without error: AcroMissingCompWClass: AcroRD32.exe  Application Error.

    it only fails to open PDF attachments to Outlook 2010 operating with 8.1 or 8.2. you previw them and save them and open but not open directly.

  • SetupAdmin.exe-Application error while installing itunes and quicktime

    Everytime I try to install iTunes or standalone QuickTime, I get the error SetupAdmin.exe - Application error :
    "The instruction at "0x76c941a9" referenced memory at ")x76c941a9". The memory could not be read. "
    and the installation finishes. After that I can see a QuickTime icon on Desktop which works fine but there is no iTunes icon.
    I have followed all the steps of uninstallation properly as per these links :
    http://support.apple.com/kb/ht1925
    I have also checked the msconfig startup taskbar, there is no Qttask.exe program running.
    Please help me out.

    Try installing QuickTime standalone, not regular
    http://www.apple.com/quicktime/download/standalone.html
    If that installs OK, perhaps the iTunes installation will go through.
    If there is any error number druing either install, please post it.

  • Javaw.exe - Application Error when installing Oracle 10.2.0.1.0

    I hope I am in the correct area. Please forgive me if I have wandered into the wrong space, but has anyone seen this particular issue and what did you do to get around it?
    v/r
    George
    javaw.exe - Application Error
    The exception unknown software exception (0xc000000d) occurred in the application at location 0x08f2c799.
    Click on OK to terminate the program
    Click on CANCEL to debug the program.

    Hello
    no, this is not the right area, you should post into oracle database forum, this one is for Oracle Collaboration Suite.
    Your problem seems to be windows-related, if you want some help tou should try this on a standard windows installation, then if it still does not work post your configuration (in the right forum)

  • Jinitiator - SysFader: iexplore.exe – Application Error

    I have installed 10g Express edition. I am taking a class and have a book, which came with Oracle Developer Suite 10g. I have installed the software. I am trying to follow the book and when I try to open a form, location.fmb file I receive an error message.
    SysFader: iexplore.exe – Application Error
    The instructions at “0x0504e348” referenced memory at ‘0x000000c”. The memory could not be “read’.
    I am not sure the Jinitiator is the cause of the error but that was the last piece of software that was installed. I have look all over the Web and maybe I am not looking or searching correctly but the only thing I can find that seems reasonable was about the Jinitiator. I have downloaded what seems to be a later version, 1.3.1.29. The version that installed during the opening of the form was 1.3.1.22. For some reason I am unable to get the program to use the new Jinitiator which I installed. I did uninstall the older version, I did start OC4J, I did login. The program still wants to install the older version. Not sure where to go from here. Any advise would be appreciated.

    Sorry, I forgot to give more info: The book I am using is Guide to Oracle 10g by Course Technology. I started OC4J. Once OC4J initialized I started Forms Builder. Once Form Builder loads, I select Open then select the file Location.fmb. Now I try to run the form by selecting Run per the instructions in the book. It asks me to login, which I do, then I select connect. Now iexplorer loads automatically and give me the error message:
    SysFader: iexplore.exe – Application Error
    The instruction at “0x04f9e348” referenced memory at “0x0000000c”. The memory could not be “read’.
    Click on OK to terminate the program
    Click on CANCEL to debug the program
    I have no idea how to debug the program and I am not sure this is what I should do anyways.
    I have two entries in Outlooks Manage Add-ons: JInitiator 1.3.1.22 and 1.3.1.28. I removed version 1.3.1.22 hoping that it would use 1.3.1.28 but when I try to open the file, it tells me that I have to install JInitiator. I say yes, and it installs version 1.3.1.22 again. I get the same error message. I do not understand why it will not use the new version 1.3.1.28. Any help would be appreciated.

  • Swagent.exe application error

    On my home computer I have a swagent.exe Application Error:
    “The instruction at “0x0012e870” reference memory
    at “0x00000000”. The memory could not be
    ‘read’. “ When my computer starts.
    I’ve searched and it seems that Cold Fusion may be the
    culprit.
    What can I do to fix this without re-formating the hard
    drive?

    What are you going to use the ODBC Services for?
    "rvp68" <[email protected]> wrote in message
    news:ek3v88$h8d$[email protected]..
    > Hello all,
    >
    > Coldfusion MX7 Server Standard on Windows 2003 Server
    Web Edition.
    >
    > As ODBC Services havn't been installed during the CF
    installation, I
    > followed
    > instructions on technote 19135 to install them manually
    > (
    http://www.adobe.com/go/tn_19135)
    >
    > After execution of the technote instructions:
    > - services have been created, but they are named
    "ColdFusion MX ODBC ..."
    > instead of "ColdFusion MX 7 ODBC ..."
    > - when starting the services, I get a "path not found"
    error. Services are
    > refering to "C:\CFusionMX7\db\slserver52", but on my
    installation, I have
    > the
    > folder "C:\CFusionMX7\db\slserver54".
    >
    > In the registry, I then manually modified the path, so
    that they refer to
    > "C:\CFusionMX7\db\slserver54". When starting the
    services, I get the
    > following
    > errors:
    > - ODBC Server: "The Coldfusion MX ODBC Server service on
    local computer
    > started and stopped. Some services stop automatically if
    they have no work
    > to
    > do..."
    > - ODBC Agent: "Could not start the Coldfusion MX ODBC
    agent service on
    > local
    > computer. Error 1067: the process terminated
    unexpectedly"
    >
    > In the system log are the following error entries:
    > - for ODBC Server service: Error 0 (long description)
    > - for ODBC Agent service: Error 1000: "Faulting
    application swagent.exe,
    > version 2.9.0.0, faulting module swagent.exe, version
    2.9.0.0, fault
    > address
    > 0x00012aef."
    >
    > I've been looking during hours on adobe website and on
    internet, but
    > didn't
    > find anything that worked.
    > Help would be very much appreciated, thanks in advance.
    >
    > Rvp68
    >

  • Cs6servicemanager.exe-application error 0xc0000005

    i just installed cs6 and on restart i get the following
    cs6servicemanager.exe-application error 0xc0000005
    please advise

    Lankybanks did you receive any error messages during the install process?  Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and intrepret your installation log files.  Please feel free to post any specific error messages to this discussion.
    Also what version of Windows are you wishing to install CS6 on?

  • Rundll32.exe-Application Error

    We are running a Microsoft Windows 2000 Server and during the startup there is an error showing rundll32.exe-Application Error.
    "The application failed to initialize properly (0xc0000142). Click OK to terminate the application" but when you click OK; it does not terminate the application and this error is permanently visible on the screen.
    Please advise.

    The rundll32.exe Application error is not a direct error. There could be several different reasons such as Corrupt rundll32.exe file, Corrupt DLL file for some application, Corrupt Registry values and even Virus infection.
    Here are few things which you can try...
    If it is corrupt rundll32.exe then run  sfc /scannow from command prompt and insert OS CD if needed to replace the original file.
    If it is corrupt DLL file from application, then re-install the application; most of the times it works.
    In case of corrupt registry entries, try running some registry cleaners such as Ccleaner etc...
    In case of virus or malware infection, update OS patches and AV definitions; run complete system scan.
    ~Santosh

Maybe you are looking for