Clueless with networks, help needed!!
My current configuration (with problems, mentioned below) is... computer (ethernet port) wired to a Lynksys router. From router (wired & I don't mind the wires), extensions to... a) cable modem, b) printer 1 (via asante), c) printer 2 (via asante), and d (newly configured and probably wrong) airport extreme w/APPLE TV). I had airport express with airtunes (which I would like to keep). Finally... I have airport card (what does that do?) Before the airport extreme (&ATV not linked with tv yet) everything worked fine, however now- airtunes blinks amber and only sometimes works, airport tells me I have 2 networks running. Diagnostics tells me the airtunes IP address missing. Apple TV light is green however I can no longer print (tells me appletalk is not connected, however if I connect... airtunes music stops). So basically... 1)How should this be configured? 2)What does the airport card do? 3)Do I have to have multiple networks? 4)How can I get airtunes to play, and my printers to work simutaneously) 5)Can everything be on just one network (and run correctly)?
Thanks, and yes I am clueless regarding networking
What you need to do is configure the "Airport Extreme" as your "main" wireless access point. Then configure the Airport Express to "join" and/or "extend" the network you created with the Airport Extreme. That way, you will only have one wireless network and your computers will not get confused. If you have the new airport, the linksys router is not really needed because the airport will serve as the router/hub. If you have the "old" airport base station, connect it to a LAN port on the Linksys router and configure it to serve only as a wireless access point and "print server". Otherwise, you will have two routers "competing" with each other. Set up and configure one device at a time.
Similar Messages
-
Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !
Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry -
Replacing hubs with switches help needed
I'm new at this so bear with me.
I have two LANs, 10.0.0.x and 10.1.0.x, connected via firewall/router with 10.0.0.245 and 10.1.0.5 address. Clients and servers are connected to hubs on both networks. I want to replace the hubs with 2960TT switches already purchased but not configured.
The 10.1.0.x Windows clients have a default gateway of 10.1.0.5 which is the firewall routing to the 10.0.0.x network which then has a default gateway of 10.0.0.253 to Internet.
I suppose I would like to get rid of the firewall but must I replace it with another routing device or can the switches themselves be configured to allow these two networks to co-exist? I need the 10.1.0.x clients to see the 10.0.0.x network and resources but not vice-versa.
I need help configuring the switches. Thanks!You could likely use your new switches as "drop in" replacements for your hubs with minimal or possibly even no configuration. However, to maintain distinct subnets, you're going to continue to need some type of L3 device, such as your existing firewall/router.
One issue you might have with your existing firewall/router is it might be performance challenged for traffic moving traffic between your two subnets. (Likely your Internet side is limited by your Internet bandwidth.) If there is a performance issue between your subnets, you might look at obtaining a faster L3 device to either replace your existing firewall/router or in addition to it. (The "in addition to" L3 device, could be an "inexpensive" L3 switch, perhaps the 3560-8PC, to handle LAN traffic, while your existing firewall/router continues to handle Internet traffic. Optimal physical configuration of something like the 3560-8PC with your new switches might be linking your two new switches on a VLAN trunk gig port and one switch to the 3560-8PC also on a VLAN trunk gig port. The existing firewall/router might then connect to the 3560-8PC on one of its 100 Mbps ports.) -
All: I am refinishing the basement and installed some ethernet to 2 walls. I outlet for a TV (when I buy it) and another for a PC (for if the resident needs it). I also want to have my wireless from upstairs be a strong signal.
So I need to know the device that will:
1) Pick up my existing wireless signal and repeat it for the basement rooms wirelessly.
2) Have 2 ethernet ports available for the hard wiring I put in.
The location for this in the drop ceiling has an 110V outlet readily available next to it.
Can someone guide me what I need to purchase to complete this and test the wiring (connectorization) I did?
Thanks a ton: EdI tend to like Ubiqiti (http://www.ubnt.com/ ) products but they can be difficult to find. These are dedicated APs, they do no routing and you'd need to also get an Ethernet switch (any old switch will do) to take the one hardwire drop from upstairs and provide a few wired ports (2 for the walljacks and 1 for the AP) downstairs. I linked to a switch below.
Also nearly any wireless router can be reconfigured as a combo AP/switch, in which case I'd just reccommend something with stable firmware. (This can be hard, you just have to read LOTS of reviews, or find something on the DD-WRT compatibility list and flash the router with that firmware. Note that DD-WRT will void a router's warranty, but if you put it into a cheap router it's usually worth the risk.)
D-Link Green Ethernet 5-Port 10/100/1000 Gigabit Ethernet Switch
Model: DGS-2205 | SKU: 7907704
This 5-port 10/100/1000 Gigabit switch provides an effective solution for expanding your Gigabit network. Power-saving features help make your network environmentally friendly without compromising performance.
4.1 Read reviews (16)
Sale: $34.99
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
hi i'm new to support communities
this is my Question:
i want a wired network for the 2 mac's and the pc desktop, the router is in the hallway and the 2 mac's are in the living room so my idea is to run a cat6 ethernet cable to an airport extream base station and 2 ethernet cables to the mac's and get a usb hard drive for all my muisc and tv programs, movies to share on the network so i can stream them where ever i need it . then run ethernet cable's to my son's bedroom and our bedroom and so we can run apple tv in our bedroom via airport express wired to apple tv and make wifi better as well for all wifi devices. i prefer wired network as it's faster and more reliable.
so i was going to buy a 5th gen apple extream x 2 and an airport express latest one.
would this be a good setup any help would be very welcome. many thank for your help
mac mini 2012 i7, imac, window's 8.1 pc (son's), iphone, sony z1, apple tv (not setup yet), now tv box,A very good plan to use an Ethernet "backbone" for the network, which will result in much faster and more reliable performance.
The 5th Gen AirPort Extreme was discontinued in June 2013.
The 802.11ac version of the AirPort Extreme offers quite a bit more performance, even if you do not have 802.11ac devices at the present time.
Apple added two additional antennas in this version and moved all of the antennas up to the top of the "tower" for more efficient broadcast operation.
The 2nd Gen Express would really limit performance since it uses 100 Mbps ports. Your Ethernet cabling and the AirPort Extreme model that you choose offer Gigabit or 1,000 Mbps ports. The numbers speak for themselves.
If the budget allows, two AirPort Extremes would be the way to go.
Apple tends to introduce new models in June of most years, so if you are not in a rush, you might want to wait and see what might be coming soon. -
Resizing DMG with Terminal help needed
I've got a DMG file with read/write privileges that I need to increase the size of. I've done a bunch of searching, both here and on the net, and the best I can find is a Terminal script, something I know nothing about. Here's the script I found:
hdiutil resize -size 25g /PATH/TO/DISK/IMAGE.dmg
But before I toss this into terminal with the modifications to make it work for mine, I just wanted to make sure I was doing everything right.
First, the path. The actual path is /Prima/Users/Doug/Desktop/work.dmg, that's how I type it? I've also seen just ~/Desktop/work.dmg so I figured I'd double check that.
Also, 25g, I have no idea what that measurement is since I've seen gb and a few other ones when I tried to search the script a bit more. I want 2.6GB, what would I need for that?
Finally, I'm guessing the "hdiutil" is just telling it that this is going to be working on a volume but I wanted to make sure that I had that right.
Any help you guys can give me would be great! Or if you can tell me another non-Terminal way to do this that'd be even better!
15" MacBook Pro 2.33GHz, 2GB RAM, 160GB internal, glossy. Mac OS X (10.4.8) 1TB My Book Premium II and DVD±RW DL LaCie BurnerNevermind.
hdiutil resize -size 2.6g ~/Desktop/my.dmg
That did it. -
Stuck with - Update- help needed
Hello all and thank you for reading!
I have the following problem with update statment. Tables and data in them are as follows:
Table 1: XML_TRANSFER
create table XML_TRANSFER as
select 111111 TAX_NR, 1 TYPE, 3000 PRIJ, 3000 POBOT from dual union all
select 222222 TAX_NR, 1 TYPE, 720.7 PRIJ, 350.70 POBOT from dual union all
select 333333 TAX_NR, 1 TYPE, 2600 PRIJ, 2100 POBOT from dual;Table 2: FIR_SET
create table FIR_SET as
select 2011 LET, 7 KROG, 111111 TAX_NR, 10 STEV_FAK, 2000 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 111111 TAX_NR, 11 STEV_FAK, 400 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 111111 TAX_NR, 12 STEV_FAK, 400 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 111111 TAX_NR, 13 STEV_FAK, 200 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 222222 TAX_NR, 1 STEV_FAK, 200 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 222222 TAX_NR, 2 STEV_FAK, 20.7 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 222222 TAX_NR, 3 STEV_FAK, 100 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 222222 TAX_NR, 4 STEV_FAK, 400 VALUE_ODPR, 0 VALUE_POBOT from dual union all
select 2011 LET, 7 KROG, 333333 TAX_NR, 81 STEV_FAK, 2600 VALUE_ODPR, 0 VALUE_POBOT from dual;Ok, tables and data are set now for the "update" logic.
Lets look at the data in table XML_TRANSFER.
First row (with TAX_NR = 111111):
UPDATE statment in this case should work like: the VALUE_ODPR should be same as VALUE_POBOT in table FIR_SET.
This part i managed to do with this SQL:
PROCEDURE xml_update is
BEGIN
update fir_set an
set an.value_pobot = an.value_odpr
where let = (select distinct max(let) from fir_set)
and krog = (select max(krog) from fir_set)
and
(select sum(a.VALUE_ODPR)-b.POBOT
from fir_SET a, xml_transfer b
WHERE a.tax_nr = b.tax_nr
and an.tax_nr = a.tax_nr
group by a.tax_nr,b.POBOT) = 0;
commit;
end;Resoult is as:
LET KROG TAX_NR STEV_FAK VALUE_ODPR VALUE_POBOT
2011 7 111111 10 2000 2000
2011 7 111111 11 400 400
2011 7 111111 12 100 100
2011 7 111111 13 200 200 Ok the next example is a bit more tricky and i cant figure it out. I dont know how to explain it properly ... i will
just post the resoult and try to explain it:
LET KROG TAX_NR STEV_FAK VALUE_ODPR VALUE_POBOT
2011 7 222222 1 200 200
2011 7 222222 2 20.7 20.7
2011 7 222222 3 100 100
2011 7 222222 4 400 30 So what we need to do is we check is XML_TRANSFER.POBOT - VALUE_ODPR > 0, IF this is it then we update VALUE_POBOT with VALUE_ODPR.
In next row we check again if above statment is correct and if it is we do the same. The process will continue as long as statment
will be correct.
If statment is no longer correct we have to do this operation: XML_TRANSFER.POBOT - SUM(VALUE_ODPR) (INSIDE SAME TAX_NR!!! So group by tax_nr!!)
and update last row with given resoult. By no means we can get negative numbers.
I really do help i explained my problem so that you will understand what i want to achive. If you have any questions please feel free to ask.
Thank you for your help!
Best regards, Cain!Hello and thank you again for taking your time!
SQL you posted is still not quite right but we are almost there ... let me show you how it should look like (i have add a little more data into tables):
Table XML_TRANSFER:
TAX_NR TYPE PRIJ POBOT
111111 1 3000 3000
222222 1 720,7 200
333333 1 2600 2100
444444 1 1000 1000
555555 1 5000 3000Those are resoults i get running your SQL .....
LET KROG TAX_NR STEV_FAK VALUE_ODPR VALUE_POBOT
2011 7 111111 10 2000 2000
2011 7 111111 11 400 400
2011 7 111111 12 400 400
2011 7 111111 13 200 200
2011 7 222222 1 200 200
2011 7 222222 2 20,7 0
2011 7 222222 3 100 0
2011 7 222222 4 400 0
2011 7 333333 81 2600 0
2011 7 444444 55 1000 1000
2011 7 555555 111 2000 0
2011 7 555555 82 1000 1000
2011 7 555555 83 1500 1500the correct resoults should be:
LET KROG TAX_NR STEV_FAK VALUE_ODPR VALUE_POBOT
2011 7 111111 10 2000 2000
2011 7 111111 11 400 400
2011 7 111111 12 400 400
2011 7 111111 13 200 200
2011 7 222222 1 200 200
2011 7 222222 2 20,7 0
2011 7 222222 3 100 0
2011 7 222222 4 400 0
2011 7 333333 81 2600 2100
2011 7 444444 55 1000 1000
2011 7 555555 111 2000 500
2011 7 555555 82 1000 1000
2011 7 555555 83 1500 1500Note at line 2011 7 333333 81 2600 2100 and at line 2011 7 555555 111 2000 500 I hope its more clear now.
PS at 2600 the correct resoult is 2100 and not 0.
Thank you
best regards!
Edited by: Cain_oracle on 24.8.2011 1:08 -
IPhone 4S - Could not scan for wireless networks - help needed please
Hi
Can anyone offer any advice please.
My 4s has developed an wifi issue. It cant scan for wireless networks My bluetooth is intermittent also.
I have turned it on/off, rebooted, reset all networks, reset to factory settings, set to airplane mode, set to do not disturb - everything and all to no avail.
I am under a two year contract with Vodafone and went into their branch at Merry Hill, Dudley today and they failed to help me saying it was nothing to do with them.
I am at a loss as to what to do. I have not had any accident with my phone and it is still in mint condition.
Can anyone please offer any suggestions on what to do.
Many thanks.Apple's out-of-warranty policy is a feeble attempt at covering up it's issues and is a clear cut demonstration for their lack of respect for its user base. Their WIFI/Bluetooth dropping issues have been around for several years now and it started within the last 3 IOS updates. Apple engineers acknowledge this problem and don't have a solution yet... this was confirmed at the Genius Bar at their Nashua, NH outlet. My phone is 6 months passed warranty and my Verizon contract isn't up for renewal for another 6 months.
There are a lot of complaints about this (a LOT), yet Apple continues to stick its head in the sand instead of owning up to providing shoddy hardware and/or glitches software. They certainly don't want to be in the business of replacing phones, so they put the onus on us by charging $200 for a replacement... such a deal for Apple!
Apple's support communities are basically useless on this subject with a lot of screwy so-called solutions to work around their flaws. I've seen one fix where you heat up the phone with a hairdryer until the temp warning appears and then refrigerate it for 10 minutes... then BINGO, it's all fixed! Ya right!!!
Resetting network settings, or all settings (including a complete reset) is ineffective and appears to do nothing more than to further upset Apple users once they realize that they have wasted their time following Apple's so-called fix.
I just wonder if or when Apple pulls it's collective head out of the sand will they be able to see that their competition has surpassed them by leaps and bounds. There really isn't any good reason to stick with Apple now-a-days since their conscience passed away. Their competition offers superior technology while Apple continues to impress up with new connector technology and placement of their sockets.
I am finished with Apple and am incredibly sick of their spoon feeding what they want rather than what we want.
The best way to make Apple improve is to provide them with a taste of their own WIFI/Bluetooth offerings by DROPPING THEM!
They have abandoned us and have no problem trying to charge us to replace their flawed technology instead of doing the right thing!
Dale E Alden
Groton, MA 01450 -
Find text and replace with image - Help needed
Hi,<br /><br />We need to place the images as inline in the appropriate places.<br /><br />texttexttext<<test1.eps>>texttexttexttexttexttext<<test2.eps>>texttexttexttexttexttext< <test3.eps>>texttexttexttexttexttext<<test4.eps>>texttexttexttexttexttext<<test5.eps>>text texttext<br /><br />This code is helpful for placing a single image at a time, we are unable to place all the images in one shot, can anyone help me out.<br /><br />I am not a programmer.<br /><br />-----------<br />var myDoc = app.activeDocument; <br />app.findPreferences = app.changePreferences = null; <br />var math=document.search("test.eps"); <br />for (i=math.length-1; i >=0; i--)<br />{ myDir = Folder.selectDialog(); <br />AllGraphics = Folder(myDir).getFiles('test.eps') <br />for (i=0; i<math.length; i++) { app.select(anil1[i]); <br /> myDoc.place(AllGraphics[i],false); } }<br />-----------<br /><br />Note: I have taken this code from forum and we have made some changes on this.<br /><br />Kavya
Jongware,<br /><br />I try running it but gives errors:<br /><br />Error Number: 55<br />Error String: Object does not support the property or method 'changePreferences'<br />Line: 24<br />Source: app.findPreferences = app.changePreferences = null;<br /><br />This is the code I used<br /><br />// Find text and replace with image for InDesign CS3 <br />// http://www.adobeforums.com/webx?128@@.3bbf275d.59b6f012<br />var heyItsAnArray = new Array ( <br /><br /> "it contains this line!", <br /><br /> "as well as this one", <br /><br /> "or even more!", <br /><br /> "test.eps" ); <br /><br />for (arrayCount=0; arrayCount<heyItsAnArray.length; arrayCount++) <br /><br />{ <br /><br /> replaceImg (heyItsAnArray[arrayCount]); <br /><br /> } <br /><br />function replaceImg (name) <br /><br />{ var myDoc = app.activeDocument; <br /> app.findPreferences = app.changePreferences = null; <br /> var math=document.search(name); <br /> for (i=math.length-1; i >=0; i--) <br /> { myDir = Folder.selectDialog(); <br /> AllGraphics = Folder(myDir).getFiles(name) <br /> for (i=0; i<math.length; i++) { app.select(anil1[i]); <br /> myDoc.place(AllGraphics[i],false); <br /><br /> } <br /><br /> } <br /><br /> }<br /><br />Michael
-
Hi,
I have two types of clients, a and[b] b, that need to pass messages between each other.
Type a are searching for a suitable client of type b to begin communicating with.
A server keeps a record of who has joined, and allows type A to look up type b in a shared datastructure.
- a >I want to talk to a[b] b with x characteristics.
- sends request to server.
- server looks up in a shared datastructure sellers with this characteristic, and returns to a any that have this
- a selects which out of the results returned from the server it wishes to communicate with
- a then begins to communicate with the selected b, ideally I'd also like the server to check that the communicated messages are reasonable and within certain constraints... but I could avoid this and have the clients talk directly with each other if its a lot easier.
So I have a basic understanding of what I need to happen, but I really don't know how to go about doing it.
Does anyone know of tutorials explaining the best way to do this?
Thanks!I understand that you need to develop some sort of client server based application.
Before you get into thick of the things, you need to know what are requirements and what Java can offer.
Add to that already available frameworks mostly opensource in abundance.
You can probably use JDK to code the entire application (client/server). But in that case you would have to take care of threading issues etc.
Or you can use a webserver to host the business logic(rules of who finds what and finally interacts or not) of your application(eg:- tomcat could be the webserver/container- you can have servlet(s)/JSP to handle the clients) to make the business logic better you can also use struts framework to design the server part of your networking quandary.
The message between the server and client could be HTTP(I could think of that or you might have to come up with your laws for interaction between the client and server).
Using a webserver for this has its own stigma attached(like performance) but it would almost erradicate the issue to handle multiple clients etc.
This could be one of the worst suggestions.
Cheers
$ -
Hi.
I'm preety new to RFCand but I have to challenge following topic:
I need to call SAP transaction MF42N from RFC. I want to pass the parametres from Excel spreadsheet or externat .csv or .txt file. Can you please provide some example code. I know how to retrive data from SAP tables with RFC but call tcode is new for me. I know I need to use RFC_CALL_TRANSACTION. But I need more code.
Thanks in advance.hi
you r doin r3 to xi
follow these steps
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
cheers
kish
<b>reward points if useful</b> -
Using eMac keyboard with iMac help needed.
I have an iMac from around 2009, at the weekend the keyboard stopped working and until I can afford a replacement a friend has given me an old eMac keyboard he had spare to use in the meantime (which could be a while).
Just this morning I've realised that it doesn't have some of the function keys that the iMac keyboard has. The one I'm missing the most is the F3 key that shows me all the windows I have open at once. Something I find invaluable as I use my mac for music production and helps sort through and find all the plugins I have open.
Is there a way to achieve what the iMac F3 does with a combination of keys on the eMac keyboard?
Thanks
Andy.With older Mac keyboards, try using the Command key with the F keys to see which F keys do what function.
-
Hello, I need help to display tax on the invoice, its numbers/ invoices,
the tax is set to 21%
it is as is but it does not calculate the tax indeed.
subtotal e495
tax 21% e0.00
Total e495
any help?
thank youTry reposting in the Numbers Forum
-
HT2515 audio chat with ichat -- help needed!
I have just purchased a new macbook air and i am new to MAC. I am unable to do audio chat through ichat (google talk) with others who are using gtalk on windows enabled PC/ laptops..can some one pleas help me through? Thanks...
Hi,
iChat uses the same protocols to do Video or Audio chats no matter if you use an "AIM" Buddy List or "Jabber" one.
However in the Case of a Jabber one, the Buddy also has to be using iChat.
This is because Jabber Apps (including the standalone App called Googletalk for PCs) use different Protocols to do Video and Audio Chats.
You could both use a Browser and Use Mebeam
(Type in a room "name" once you are in the room copy the URL of the page and send it to your Buddy to invite them)
This uses Flash which you have to have On in your Browser.
If you have a Google Mail ID and have Enabled Talk on your Account you could download the Google Web Browser Plug-in and Chat on the Google pages.
9:06 PM Monday; July 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Oracle Reports with Tomcat - Help needed
How do you deploy oracle reports in Tomcat.
** Can we add the necessary Jar files and run the rdf files.? If so can someone please help with this.
**What are the settings to be taken care of ?
** I deployed the web.war and added the jar files to the web-inf/lib .
But when i call the report as
hostname:port/reports/servlet/rwservlet?report=test.rdf&destype=cache
It doesnt return anything .it gives 404 error The requested resource (/reports/servlet/rwservlet) is not available.Please help .
Any help is appreciable ..
Thanks again.
JMPhani-
I have developed reports that run other reports in 9i and10g. I would have a "main" report that I would call from Forms (or HTMLDB). This "main" report would run multiple other reports. I used the report built-in procedure SRW.RUN_REPORT("report=report2.rdf parameter=XX") in the After Parameter Form trigger of the main report to call the other reports.
I hope this helps,
Dan
Maybe you are looking for
-
USB shared printer not showing up in 10.5.8 default list
Ugh - so I've spent half a day Googling and reading stuff but so far - no joy. I'm trying to print to a Brother HL-5240 printer connected via USB to a G4 Power Mac running 10.5.8 (I could print from all my machines when everything was running 10.4.11
-
ITunes keeps opening itself up
Hi, can somebody please tell me how to disable iTunes from continuously opening itself up for no paticular reason? I'm not sure why it started doing that but now every 2 minutes or so iTunes will just start itself up and it's getting incredibly annoy
-
Database Exception in BPM 10GR3
Hi all, I have a database column which is a date which converts into Time when catalogued inside BPM 10GR3. When I execute a query i.e. query = "INSERT INTO test_table( CREATION_DATE,) VALUES ('" + Time.now() + "')"; implName = "testDB"; result = Dyn
-
Show selected nodes of hierarchy in query
Hey Folks, I'd like to display a hierarchy in a query. The user has to select the interested nodes and then show them as queryresult. In this context it doesn't matter if there are posted values or not. I tried a query without any keyfigure. This que
-
Input level meter not working in multitrack
Wanted to see if anyone could help with this problem. This problem has persisted in 5.5 and now 6. My input levels work fine in wave editor but not in multitrack. When I try to right click it's greyed out. Im a vo artist so my setup is pretty str