Cluster Analysis source code

Hello
i need a source code for a cluster analysis. We planning a project at our university and we have to cluster vectors and do a visualization of a tree. If anyone know where I can find a code like this that would be great.

Yahoo! Search
TOP 20 WEB RESULTS out of about 2,100,000. Search took 0.16 seconds.
1 . Cluster Analysis
... The term cluster analysis ( first used by Tryon, 1939)...Thats one, I am sure you can look through the other 2,099,999...
Have fun...
- MaxxDmg...
- ' I am not a number... '

Similar Messages

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

A simple text page like this:
Heading
    sub heading
          text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
     <h2>sub heading</h2>
          <p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

Error during analysis of source code

Hi,
I am trying to add a field to the search criteria and i have followed the steps as given in the cook book. I am stuck at a point where on trying to add the custom field to the existing code i get an error message - "Error during analysis of Source code". This pop up comes at the end of the wizard.
I also tried to create a new context node but at the end of the wizard i get the pop up and the same message inside.
I searched in SDN and found out that this error could occur if the context node class is not active. In my case, all the three classes : Controller , context and context node class are active.
Could some one throw some light as to why this error message occurs?
Regards,
Venkat

Hi Experts,
I'm also getting a similar error but at the time of creating a new event. All the classes are active without errors.
How do we resolve this.
Appreciate your help.
Regards,
Sandeep

Source code analysis tools for ActionScript 2?

I have been tasked with performing source code analysis on a very large (>1000 files) AS2 codebase.
Not surprisingly, Googling is not yielding useful results. Before declaring defeat, I felt it important to query this forum.
Any guidance would be appreciated.

We'd like to evaluate the hundreds of files using a static analysis tool, just as one would use lint for a C codebase.
Thanks,
M

Source Code Analysis tool for BPEL (and BPMN) 11g

Hi,
We are checking for the availablility of 'source code analysis' tools (analogy like findbug, checkstyle) for BPEL / BPMN Orchestrations.
Any information/pointers to it is really valuable and appreciated.
Thanks,
Pavan.

Hi AnujaMoharir,
Welcome to MSDN.
I am afraid that as Renee Culver said, these forums donot support VB6, you could refer to this thread:
Where to post your VB 6 questions
You could consider posting this issue in these forums below:
These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
VB Forums
VB City
Thanks for your understanding.
Best Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Have any source code can produce a web traffic analysis?

I want to get the source code to produce a web traffic analysis report, for example i input a tomcat's access_log, it can analysis this log file and then output the analysis result in html file format.
I have already found a source code to parsing the IE's log file, but i can't find a source code to parse the tomcat's access_log file.
Have anybody know where can download this source code.......Thank a lot!!!!!

I also want to know how to do this........

Developing a data mining tool with cluster analysis

Can anyone help me find any relevant source code to develop a data mining tool with cluster analysis capabilities. I have found bits of source code here and there in C/C++ but haven't found any in Java. I really need to see the source code for a full program as at the moment I am trying to convert C into Java and then don't know how to tie it all together.
As you can imagine - I am a very novice programmer and haven't got much time left to complete my project! Any help would be greatly appreciated!

I really need to see the source code for a full program...
I am a very novice programmerWell then I seriously doubt that even seeing a full program would be any use. Besides do you honestly believe that anybody is going to show you their code for 10d$...
Oh, and don't cross post.

How to use Source Code Control for Large Application?

Hi, All!
I would like to collect knowledge about "best practice" examples for using Source Code Control and project organization for relative large application (let's say approx 1000 SubVIs).
Tools used:
LabVIEW 8.0
CVS Server
PushOK CVS Proxy Client
WinCVS
With LabVIEW 8 we can organize large project pretty well. This described in article Managing Large Applications with the LabVIEW Project.
I have read this article too: Using Source Control Software with LabVIEW In this Article Source Safe used, but with PushOK all looks nearby the same and works (some tricks for compare function are required).
Example. Two developers working together on same project. Internally project is modular, so one developer will work with module "Analysis", and another one with "Configuration" without interferences. These modules placed into Subfolders as shown in example above.
Scenario 1:
Developer A started with modification of module "Analysis". Some files checked out. He would like to add some SubVIs here. So, he must also perform check out for the project file (*.lvproj), otherwise he cannot add anything into project structure.
Developer B at the same time would like to add some new functions into module "Configuration". He also needed to check out project file, but this file already checked out by Developer A (and locked). So, he must wait until lvproj file will be checked in. Another way is mark *.lvproj files as text files in PushOK, but then one of developers will get conflict message by checking in and then merging will be necessary. This situation will coming very often, because in most cases *.lvproj file will be checked out all the time.
Question: Which practice is better for such situation? Is Libraries better than folder for large project?
Scenario 2:
Developer C joined to the team. First, he must get complete project code for starting (or may be at least code of one Library, which assigned to him).
Question: How it can be done within LabVIEW IDE? Or WinCVS (or other SCC UI) should be used for initial checkout?
Scenario 3:
Developer D is responcible for Build. Developers A,B,C have added lot of files into modules "Analysis", Configuration" and "FileIO". For building he need to get complete code. If our project splitted into folders, he should get latest *.lvproj first, then newly added SubVIs will appear in Project Explorer, then he should expand tree, select all SubVIs and get latest versions for all. If Project organized in Libraries, he must do the same for each library, isn't?.
Question: Is this "normal way", or WinCVS should be used for this way? In WinCVS its possible with two mouseclicks, but I prefer to get all code from CVS within LabVIEW IDE recursively...
That was a long post... So, if you already working with LabVIEW 8 with SCC used for large project, please post your knowledge here about project structure (Folders or Libraries) and best practices, its may be helpful and useful for all of us. Any examples/use cases/links etc are appreciated.
Thank you,
Andrey

Regarding your scenarios:
1. Using your example, let's say both developers checked out version 3
of the project file. Assuming that there are only files under the
directories in the example project, when Developer A checks in his
version of the project, there will be new files in one section of the
project separate from where Developer B is working. Developer B,
notices that there is now a version 4 of the project. He needs to
resolve the changes so will need to merge his changes to the latest
version of project file. Since the project file is a text file, that is
easy to do. Where an issue arrises is that after Developer B checks in
his merged changes, there is a revision 5. When Developer A and B go to
make another change, they get the latest version which will have the
merged changes to the project file but not the referenced files from
both Developer A and B. So when A opens version 5, he sees that he is
missing the files that B checked in and visa versa. Here is where the
developers will needs to manually use the source control client and,
external to LabVIEW, get those new files.
Where libraries help with the above scenario is that the library is a
separate file from the project so changes made to it outside of the
project do not require the project to be modified. So this time, the
developers are using a single project again which time time references
two libraries. The developers check out the libraries, make changes to
the libraries, and then check those changes in. So when each developer
opens the project file, since it references the project file, the
changes to the library will be reflected. There is still the issue of
the new files not automatically coming down when the latest version of
the library is obtained. Again, the developers will needs to manually
use the source control client and, external to LabVIEW, get those new
files. In general, you should take advantage of the the modularity that
libraries provide.
2. As noted in the above scenario, there is no intrinsic mechanism to
get all files referenced by a LabVIEW project. Files that are missing
will be noted. The developer will then have to use the source control
provider's IDE to get the initial contents of the project (or library).
3. See above scenarios.
George M
National Instruments

How to get the source code of a PRT application in the portal

Hi!
Does anybody know how to get the source code of a PRT application in the portal?
Thanks in advance,
Celso

Celso,
If its Java-based code have a look at the properties of an iView that belongs to the application in question and copy the value of the Code Link parameter e.g. 'com.sap.pct.hcm.rc_vacancyrequestov.default'.
Search the Portal installation directory under /j233/cluster/server/ for a .par.bak file of the same name, removing .default from the codelink parameter
e.g. com.sap.pct.hcm.rc_vacancyrequestov.par.bak
Copt this locally and import into Netweaver Developer Studio. You will have to decompilte the class files with a decompiler such as DJ Decompiler or Cavaj (search with Google).
Cheers,
Steve

Source codes wanted

does anybody have codes for any of the following reports?
·     Report for Sales Orders due for delivery.
·     Revenue Reports based on Order Types.
·     Report for list of Pending Purchase Orders, Cancel Purchase
orders.
·     Interactive Report that lists out all the materials for a given
plant. Secondary list contains Vendors who supply the chosen material.
·     Analyze material receipts & issues. It finds the balance of
issued goods & received goods based on plant, storage location, and
material in particular period.
·     Classical Report list sales order line details for those orders
where the confirmed quantity is greater than the quantity PGI (post goods
issued) after the customer requested delivery date has passed. Price list analysis report using various pricing procedures and pricing conditions.
·     Report for displaying the material batch information such as
storage location, batch number, fiscal year, stock details for the given
range of materials, plants and period information.
·     Purchase order Report.
·     Purchasing Requisition pending report.
·     Interactive Report for displaying Vendor Information based on the
selection made the corresponding Vendor Bank Details is listed.
·     A report to get all the sales order with particular delivery.
·     Report to display the item purchased in a particular period of
time, the vendor information, and credit period.
·     Report that lists the shipping point, loading point, transport
partner name and the shipping date given the sales order number as user
input.
·     Report for Material Requirement List for a Production Order. It
displays the quantity of materials required to produce a material based
on its BOM for any date duration.

Hi Seenu,
You said that you are able to see the screen. On that screen follow the following navigation.
System -
> Status
Now you will able to see a dialogue box. In that you will find program name.
Copy that program name and go to SE38 TCode, and paste there. Now click on display push button. Now you can see the source code.
Regards,
Ramesh.
Mark all helpful answers.

New Front-End Editor is Dumping when I try to check an ABAP source code

Hi Experts
I'm trying to check the source code of any ABAP in SE38 with the new front-end editor, but I'm facing a dump, maybe there is missing a patch or something like that. if any of you have information about that I really appreciate your aswers.
I reinstalled the SAP GUI and still have the issue.
part of the dump is here
Runtime Errors         MESSAGE_TYPE_X
Date and Time          04/09/2008 15:12:51
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Control Framework : Error processing control
     Long text of error message:
      Diagnosis
          An error occurred when the system tried to process the commands
          from the Automation Queue on the presentation server.
          There are several possible reasons for this:
          - The installation of the SAP GUI on the presentation server is
          faulty or obsolete.
          - There is an error in the application program
          - There is an error in the SAPGUI or an integrated control

Hernan Enriquez ,
                           Hi you can try the below things :
1) You need have the latest patch of the SAP GUI installed.
2) If you have the above try to re-install the GUI from the scratch. It might be courrupted.
3) If VISTA need to check the GUI compatibility.
Thanks,
Greetson

Waiting for aging report source code

Hi,
Please give the source code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.

Look at transaction S_ALR_87012178.
Send the cash to Eric.
Regards

W3_PUBLISH_SERVICES and dump while viewing the source code in se80

Hi,
external ITS6.20 on SAP R/3 4.7
we have installed ITS and we published the templates. When we published the teampltes using the standard prgram   W3_PUBLISH_SERVICES, and around 43 of the services fail Not sure if this is an error
After the upgrade is finished, you must make this up, before you can use the Internet applications of the system. For a detailed procedure description see Note 399578.
or not.
On the other hand when i go to se 80 and try to view the source code of any ITS service lets say PZM3 in my case, the entire application goes for a dump with error
Exception condition "INVALID PARAM VERB: TEXTSTREAM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
A RAISE statement in the program "SAPLOLEA " raised the exception
condition "INVALID PARAM VERB: TEXTSTREAM".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
The termination occurred in the ABAP program "SAPLOLEA " in
"AC_FLUSH_CALL_INTERNAL".
The main program was "SAPMSEU0 ".
The termination occurred in line 220 of the source code of the (Include)
program "LOLEAU10 "
of the source code of program "LOLEAU10 " (when calling the editor 2200).
Any deas what the error could be??
On the other hand i tried to see the Service 'System' and 'webgui' from se80 di dnot find any..
Any ideas if we are missing in our landscape.
Message was edited by:
        RajK
Message was edited by:
        RajK

Hi RajK
> On the other hand i tried to see the Service 'System'
> and 'webgui' from se80 di dnot find any..
> Any ideas if we are missing in our landscape.
The services system and webgui are shipped within the installer of ITS 6.20. So you can't find them in the database via SE80, instead only in the filesystem.
Not your main problem, I know, but I just wanted to clarify.
Best regards,
Henning

Get the source code of CO - WDCOApproval & NotificationCOwithAttachment

HI, SDN Experts.
I am trying to extend the functionality of the following standard GP Callable Objects, which are type of Web Dynpro applications (implementing GP interface) and library class:
Text: Approval callable object
Description: Approve or reject input data of the callable object
Web Dynpro Component: com.sap.caf.eu.gp.ui.wdco.approval.WDCOApproval
Web Dynpro Application: sap.com/cafeugpuiwdco
And:
Container Type: Library
Container: cafeugp~actions
Implementation Class Name:
Implementation Name: Notification
Implementation Description: Sends a notification to process contributors
Where can I get the source code or the DC of these two components?
Thanks for advise,
KC

AFAIK, you cannot get the source code of these DCs as they are a part of pre-delivered SAP standard content. However, you can find the WAR file corresponding to the DC that contains the WDCOApproval component under:
\usr\sap\<Inst Name>\J<Inst No>\j2ee\cluster\apps\sap.com\cafeugpuiwdco\servlet_jsp\webdynpro\resources\sap.com\cafeugpuiwdco
if you are using CE 7.1
If required you may de-compile the class files corresponding to WDCOApprovalView.java, WDCOApproval.java, WDCOApprovalInterfaceCfg.java, WebDynproCOInterfaceView.java, WDCOApprovalInterface.java to understand how this component works.

Where to download Java Source Code of Libraries?

Hi Sir/Madam,
Would you please tell me where can I get the Java source code of Libraries?
Specifically for package sap.comcrmtcuserassembly.jar?
I tried to look on to Downloads and Search but can't find it.
Thank you very much in advance.
-jemaru

I've found it, the source codes are downloaded at:
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\

Cluster Analysis source code

Similar Messages

Maybe you are looking for