Cluster and password

Hi everybody,
I'm fighting with compressor for 3 days...
After a dozen tries to create a DVD from a Final Cut project, I am about to renounce.
I tried to setup Qmaster following this procedure https://discussions.apple.com/message/21350759#21350759
and to create a cluster. Unfortunately, when I want to administrate this cluster, I am requested a password... that I don't know because I didn't enter anyone!
The 35 min HD video in Final Cut needs about two days to be encoded! just because I requested an "optimal" de-interlaced treatment.
After a few hours, Compressor is stalled.
I have tha last iMac Core i7 3,4Ghz. Memory 32Go. ML 10.8.3. Compressor 4.0.7.
Should I remove everything?
Last problem... After each try, I trash the files created by Compressor and each try tells me that the file (m2v or Ac3) will replace an existing one! where is it? I have been looking everywhere.
Thank you for any help.
Best regards from Montpellier (France).
Pat.

Original footage should be progressive as I choosed PF25 in the Legria HF G10 menu...
But! the "original media" in the Final Cut Events seem to be "interlaced" "Top field first". Resolution is 1920X1080. Here is a capture of an "original media" clip spec.
I suppose FCP changes the original progressive into an interlaced type during the import?!!!
The judgement was made on TV.
Thank you +++

Similar Messages

  • Dynamic username and password for UsernameToken in Receiver Soap Adapter.

    Hi All,
    I am using AXIS Frame work for WS Security Authentication in Receiver SOAP channel. I deployed AXIS and used WSDoAllSender handler. I want to set the username and password parameters in the module dynamically. These have to be extracted from the payload. 
    kindly give me pointers to dynamically assign Username and Password.
    Regards,
    Saipriya.

    continued from the previous entry
    1.  configure the following four handlers in the request chain
    Handler dc
    Handler xireq
    Handler wssec
    Handler trp
    For the xireq and trp handler, you can use the default setting.
    For the dc and wssec handlers, you use the following setting:
    dc: handler.type =  java:com.sap.aii.axis.xi.XI30DynamicConfigurationHandler
    dc: key.1 = write http://sap.com/xi/axis username
    dc: value.1 = user
    wssec: handler.type = java:org.apache.ws.axis.security.WSDoAllSender
    wssec: action = UsernameToken
    wssec: passwordType = PasswordText
    wssec: passwordCallbackClass = com.sap.aii.axis.security.DefaultPasswordCallbackHandler
    2. Create an external password file with user password pairs. For example, if you have three users: orange, banana, and apple, with their passwords: orange, yellow, red,  you create a file with content:
    orange:orange
    banana:yellow
    apple:red
    You name this file to ".password" and place it at the engine's classloader directory (e.g.,
    /usr/sap/E07/JC90/j2ee/cluster/server0)
    3. Prepare the input message containing the user name in the dynamic configuration header that looks like:
    <ns3:DynamicConfiguration xmlns:ns3="http://sap.com/xi/XI/Message/30">
      <ns3:Record name="username" namespace="http://sap.com/xi/axis">orange</ns3:Record>
    </ns3:DynamicConfiguration>
    The namespace and name must match the value used in the key.1 property of the dc handler. As long as they match, you can use any names.
    In this example, the user name value "orange" will be extracted by the dc handler and inserted into the message context.
    4. Send a test message.
    Best regards, Yza

  • Enter username and password for "weblogic" at ..

    We have a web service running on a single domain on a weblogic 7.0 SP1 cluster.
    We load balance via a F5 in front of the cluster. Our F5 accepts SSL requests
    on port XXX3, terminates SSL and forwards the non-SSL request to a managed server
    in the cluster for processing. Likewise, the F5 receives HTTP requests on port
    XXX0 and forwards the non-SSL request to a managed server in the cluster.
    We have no Weblogic security features configured for the web service. Only the
    standard "myrealm" is configured with the defaults values.
    Whenever we call this web service, via the F5, on the XXXX ports, we are prompted
    to authenticate. The message "Enter username and password for "weblogic" at <domain-name>"
    appears. We don't even have a "weblogic" realm configured. (1) We are not sure
    why we need to authenticate when no security has been configured for this application
    (2) We've tried every username password combination we can think of and none work.
    One clue is.... if we use the standard HTTP ports 80 and 443 for traffic coming
    into the firewall, we are not prompted to authenticate. The web service works
    just fine. The problem seems to rise when we use the non-standard ports on the
    F5 of XXX0 and XXX3 and forward traffic from these ports to the managed servers.
    Has anyone seen this behavior?
    -Cassandra

    In Firefox go to the tools menu - Add-ons - extensions then remove browse for change.

  • User and password fields vanish in login window

    Hi all
    I'm scratching my head. I have a managed 10.7 client, bound to a 10.7 OD, for various testing. Set login window to show user and password text fields. Sometimes (but not always, haven't found a rule yet), there is a little left/back arrow left to the user field. If I click it, user and password text fields vanish, leaving me with a more or less blank login screen except for the restart/shutdown/sleep buttons. Nothing I tried will bring back the text fields, and the only option is to do a restart.
    Anyone seen this? What should it be good for?
    I thought that maybe this should be something like in Windows, where you have to press ctrl-alt-del to get the actual login screen to show, but neither cmd-option-shift-enter nor cmd-option-ctrl-enter have any effect. Nor does esc or ctrl-option-esc.

    Finally got the upgrade rolling again.  Not sure which trick did it, But the last thing i did was this.  I changed the password for the user SAP* using the configtool under cluster-data -> Global server configuration -> services -> comn.sap.security.core.ume.service -> ume.superadmin.password.  Type in the value field, hit "set" and retyped it in again. Hit save, restarted the instance. I had tried this earlier under the single instance server.  But that didn't seem to take effect.

  • How to reset cluster signature password !? VDI 3.0

    Hi
    anyone know how to reset cluster signature password !? VDI 3.0
    regards

    Just edit the "<installdirectory>/slapd-systemid/config/dse.ldif".Then find this parameter 'nsslapd-rootpw: '.Detele that encripted text and save that file.then restart the directory server logon as admin and goto iPlanet Directory server 5.0 and select configuration tab choose Manager tab on right pane then enter your new password and confirm password then save it.colse directory server and console and login as directory manager.same procedure for change Directory Manager id also.Try with this.
    Ashok

  • Excel Download of a Web SAP BW Report asks userid and password.please help

    Dear BW folks,
    Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
    When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
    The report has 0cust_sales hierarchy and SBU hierarchy.
    Is there any thing to do with these hierarchies that the excel download is asking user name and password?
    Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
    Regards
    Pavan

    Hi Pavan
    It is possible,please refer the below link
    Report execution without prompting user id
    Providing un-secured access to a web report.
    Also, for the time being, you can run the query and save a workbook and sent across
    These will resolve the issue
    Thanks
    Pavan Agarwal

  • How can I reset my IPAD 2 to resolve the fact that Apple will not let me use the APPLE  ID and passwords that I want to use becasue they may have been used in the past year. I am very close to donating this contraption to the Good Will.

    I have been an Apple User for almost two decades and have had no problems with my G4 Powerbook, my Intel MacMini, nor several other Macs as well as Windows 7 machines. However, the IPAD2 poses a problem of unfathomable disgust with the concept and implementation of the Apple ID. There is one for the computer, there is one for support, and there is one for itunes, and possibly another one for apps. There are different passwords for each. I am continually faced with notification that my Apple ID is incorrect or the password is incorrect. I have to keep an Excel spreadsheet with all of this unnecessary NANNY State protection matched only in pervasiveness by the Federal government.
    I am told that an Apple ID can never be destroyed and replaced. Who dreamed that one up? I am told I cannot use a password that has been used in the past year. Why? By whose authority? I am not a walking encyclopedia that remembers every telephone number he ever dialed. Thankfully my cheap LG clamshell telephone keeps numbers and talks to Ford Sync successfully.
    Bottom line is that the IPAD has become almost totally useless since I cannot change the several necessary passwords to anything I can remember because they are not novel enough. I also never seem to be able to keep the Apple IDs straight as they are too numerous to remember and I don't want to remember them anyway. Why? Even if you enventually get the ID right you have the wrong password and have to go through a merry-go-round of emails to change the password to something you have already used in the past year which is not permitted.
    Has anyone out there used a competitive device with less cumberson overhead? Surely this is not the best American technology can produce.
    Thanks for your comments.
    Ray Zachary

    Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
    Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
    The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
    Even if I sold this Ipad and bought a new one, the system memory is still there.
    I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
    One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
    Thanks for your comments.
    RAZ

  • Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

    Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

    Why have 5 accounts if you need to access all of them.. just have one account?
    Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

  • Why does version 24 no longer remember usernames and passwords, even when it's selected to remember? I installed it on 2 of my computers, XP pro and XP home op

    On both of the computers, it does not remember the password or usernames, on XP pro the selection box's are shaded and un-selectable, and on XP home they are selected but it does not remember them either!

    Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
    There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically.<br />
    The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
    If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you anymore and you need to sign in once again.
    * http://kb.mozillazine.org/Cookies
    * http://kb.mozillazine.org/Password_Manager

  • TS4002 I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password I want a solution to the problem, because in this way I

    I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password
    I want a solution to the problem, because in this way I will not benefit from the iPad

    There is no solution.  You have to provide the ID and password.  There is no way around it.  If the person you bought it from can't provide it, return it and get your money back.

  • Reporting Services username and password prompting

    We have several branch office locations and one reporting services server. All of the branch office locations can access the reporting services server, but we have one location for the passed week, each time they make a connection to this server, it prompts
    them for a username and password and will not allow them to connect even if the correct username and password is correct.
    I have tried adding the server to the IE intranet/trusted site list. Set IE security on all zones to automatically logon with current username and password.
    What is strange is that this is the only branch office site that is having this issue. It is almost like kerberos is broken for this site location only.
    DOes anyone has any suggestions what could be causing this problem for all computers in this one location. Nothing has changed on their local servers nor have we pushed any updates to the machines.

    Hi bubba1984,
    As per my understanding, I think this issue is caused by Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In the failure case, there is
    a mismatch between the destination specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
    To fix this issue, please try to remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file. For more details, please take the following article as reference:
    http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Some error in cluster alertlog but the cluster and database is normal used.

    hi.everybody
    i used RAC+ASM,RAC have two nodes and ASM have 3 group(+DATA,+CRS,+FRA),database is 11gR2,ASM used ASMlib,not raw.
    When i start cluster or auto start after reboot the OS,in the cluster alertlog have some error as follow:
    ERROR: failed to establish dependency between database rac and diskgroup resource ora.DATA.dg
    [ohasd(7964)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
    I do not know what cause these error but the cluster and database can start normal and use normal.
    I do not know whether these errors will affect the service.
    thanks everybody！

    anyon has the same question?

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • Single sign-on and different usernames and passwords

    Hello,
    I am building a Portal with WLPS 3.5 and WLS 6.0. I tried to get
    information about the background of single sign-on.
    I understand, that I need a Realm (i.e. LDAP Realm) to authenticate the
    user for the first login to the portal (with username and password).
    Now I would like to integrate my webmail-programm (to get emails from
    Lotus Notes via Internet) as a portlet.
    For my understanding the user has to authorizate to get access to webmail.
    Therefore I create a ACL for webmail and this ACL is assigned to my
    security Realm.
    I would like the portlet to show after login the number of mails for the
    specific user. But where are the username and password for webmail stored
    and how are they received and forwarded?
    I understand that my ACL included all users that have access to webmail
    (i.e. all users). But I only want emails for the specific user.
    Does WLS get all usernames and passwords while the first login? Do I have to
    implement a algorithmen to get the specific username and password for the
    requested resource in my portlet?
    Has anyone solved a similar problem or can tell me where I can get more
    information. I read the WebLogic Security document but I cant find a
    answer to my questions.
    Thanks
    Lydia

    Lydia,
    I'm not an expert in this area, but I can give you a start.
    As for single sign-on, there are different levels. For single sign-on across web-apps,
    the servlet spec requires this (section 12.6 of th 2.3 spec) and therefore Weblogic
    does this.
    What you are talking about is single sign-on across back-end applications through
    a web-app. BEA has partnered with Securant (just acquired by RSA) to provide this
    kind of functionality. Browse to http://www.rsasecurity.com/products/ and look
    at the ClearTrust product. BEA has also partnered with Netegrity (www.netegrity.com)
    with their SiteMinder product. Neither is included in the Weblogic license. I'm
    sure either vendor would be excited to explain how their product will solve your
    problem if you give them a call.
    As for where the username and passwords are stored, that is up to the realm. If
    you are using the default WLPS RDBMSRealm, the username and encrypted password
    are stored in the WLCS_USER table. If you are using LDAPRealm, they are stored
    in your LDAP server.
    Hope this was useful!
    PJL
    [email protected] wrote:
    Hello,
    I am using PersonalizationServer 3.5 and WLS 6.0 SP 2.
    Now I try to unterstand the functionality of Single sign-on when a user
    has different usernames and passwords for different applications.
    Can someone explain where the usernames and passwords for a user are
    stored (all in the LDAP-realm or a RDBMS-realm?) When a user access the
    application how username and passwords are mapped? Or usernames and
    passwords for all applications are the same and will be equalized?
    Precisely I would like to get access to a mail-account for a specific
    user
    (webmail from Lotus Notes).
    Thanks for any help
    Lydia

  • HT1904 I HAVE SPOKEN WITH APPLE AND THEY HELPED ME AS I HAVE CANCER AND THIS IS MY COMFORT THE VIDEOS HELP TAKE AWAY MY PAIN,NOW THE ID AND PASSWORD ARE NOT BEING ACCEPTED AGAIN IHAVE HAD SAME FOR TWO YRS .

    I am having a problem with loging in to my apps as i have had same id and password for all and for two years . youtube music video's helped get through the pain of cancer and the computer help me conect to my friend then i went to mail and i was recieving nothing my doctors all have same passwords and lawyers ,and it would be hard and i could never remember many password changes as i was fine with   ,now this is second time google caused this problem and said i must change password as i belived again and did with out anyone accepting it .i con not recieve mail, or go to face book,or google search as was my only browser and they will not accept my id as they say it is wrong as does all othe web sites as well as youtube i am at a loss . please help me .   Sincerely Debra Rossi Jones
    <Email Edited by Host>

    We are fellow users here on these public forums, you're not talking to iTunes Support - I've asked the hosts to remove your email addresses and password from your post. If that is your current password that you've posted for everyone to see then you should change it IMMEDIATELY.
    I'm not sure that I understand all of your post. By 'google' do you mean your gmail email accounts ? If you do then how are you trying to access your email, via the Mail app and/or another app on your phone, the Mail program or a browser on your Mac ? If you are using the Mail app on your phone and you've checked your email account's password then you should be able to add that new password on your phone by tapping on the email account in Settings > Mail, Contacts, Calendars, then tap on the 'account' at the top of the next screen, and you should then be able to enter the new password. If you are using the Facebook app on your iPhone, and you've changed the password for logging into Facebook, then you should be able to update it on your phone via Settings > Facebook
    If you are using the Mail app on your Mac, then to change your gmail password in it (assuming that you've changed the password for it) then go into Mail > Preferences (command-comma), select the Accounts tab on the preferences, select the gmail account on the list of accounts, and on the right-hand side of that screen you should be able to update its password.
    If the problems are on your Mac then you might be better off re-posting in one of the other forums (e.g. Safari, and there are forums for various Mac OS X versions), and there is also a Using iPhone forum - this forum is for the iTunes Store e.g. buying, downloading content from iTunes.

Maybe you are looking for