Cluster: automatic push of software from Active to passive node?

(Newbie) Setup: Two node cluster, active\passive.
After installing software on the active node will it (or any portion, e.g. config files) be automatically pushed to the passive node and kept in sync? Or am I required to install the same software on the passive node myself?
TIA,
edm2

To make sure your application can run from both cluster nodes, the executable should be installed on the same path on both nodes. This ensures that if the generic application fails over, the file upon which it depends are available on the
other cluster nodes.
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Similar Messages

Switch over from active to passive in the cluster

If online EMS Sun Server goes off line , the client looses the connectivity with EMS till the IP address of the other online server is updated in client PC.
When the servers switch over from active to passive in the cluster, we have to change the server IP settings at the client PC manually. Since both the active as well as the passive servers will be pinging, we are not in a position to identify the active/passive servers, so automatic server setting is not possible at the client.
How to find out the solution for which server is active when the swich over is happend.

Hi Kristoffer,
remember to click on enable schedule when you schedule a package.
To know if a scheduled package is ok you can see first if present in the tblschedule of your appset and also if present in the windows task schedulerif with status "ready".
After you just have to check the view status if you found the package execution completed you're sure it's running. " version at the same time can cause issues also with different packages better to schedule with a sufficient delay to be sure that the first has ended, in your case 1 package is ok.
I would delete the 2 packages from bpc, checking also the windows scheduler to be sure that no packages are running and rebuild one from scratch setting repeat every 4 hours and checking "enable schedule".
Regards
Roberto

CSS 11501 push new software from the production to a standby box

Is it possible to push/sync the new software image on the production CSS to a redundancy/standby CSS? e.i script play......
Thanks

this is not possible.
You have to install the software on the standby unit from a FTP server manually.
Gilles.

Resources automatically deactivating when removed from Active Directory

This is a simplified version of my previous question:
What causes some resources to successfully deactivate when removed from AD, while other Project Server 2010 accounts have to be made inactive manually?
Also, if a resource is made inactive or deleted in Project Server, is it expected that their SharePoint account will be completely deleted?
Thanks!

When you remove the user from AD group, that account will become inactive in the next AD synchronization in Project Server. When the account is inactive, it will be removed from the PWA as well as all the workspaces.
In 2007, if you make the user inactive, it will deactivate project server access, but the user can access the project workspaces
In 2010 onwards, When the account is inactive, it will be removed from the PWA and workspaces.
Cheers. Happy troubleshooting !!! Sriram E - MSFT Enterprise Project Management

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer

I update my iphone 3gs software from ios 4.1 to 6.1 but it couldn't activate and itunes displays that activation server not found what should i do now please help me.

please help me to activate my iphon 3gs , when i update my software from ios 4.1 to ios 6.1 then i connect to itunes & it displays that we are unable to continue with your activation or activation sever not found. pleses...plese help me .

We can't help hacked/jailbroken iPhone here, you have to google for solution.

OIM 11gR2 - Push/Pull account locked out information from Active Directory

Hi
At this moment, we are using the default reconciliation method from the Active Directory Connector in OIM 11G R2 to fetch incremental information from AD. This runs every 15 minutes.
However, the customer complains that the time from which the user gets himself locked out due to too many failed login attempts, until it shows up on the OIM account is too long. Worst case, this could be 15 minutes after the user gets himself locked out.
Do anyone have any tips on how we could either push this information from AD-side, or pull this information from OIM more often? Could we create a special scheduled job that just looks for Locked Accounts, and reconciles this each minute?
Best Regards
lloberg

Hi,
Sure, that's definitely possible. You can use the Active Directory cmdlets to retrieve this information. Here's an example of reading input from a text file (just usernames in the text file):
Get-Content .\userList.txt | ForEach {
Get-ADUser -Identity $_ -Properties EmailAddress
You can also read input from a CSV file quite easily. This example assumes a header of Username:
Import-Csv .\userList.csv | ForEach {
Get-ADUser -Identity $_.Username -Properties EmailAddress
Finally, here's a link to the Get-ADUser syntax:
http://technet.microsoft.com/en-us/library/ee617241.aspx
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

Using MDT 2013 for deploying Software from MDT Server to PC Client automatically and silently ?

I have a trouble about deploying software from MDT 2013 server to PC Client , Can we using MDT 2013 for deploying software automatically and silently , that Users/Clients don't have to click "next,next" to install software ?
If you have a solutions to deploying it , please share me about that solutions ?
Thanks.

you can make software silently with boot opción:
with chocolatey opensource.
or make software with switches
here link to help you:
http://blogs.itpro.es/octaviordz/2014/05/29/instalando-aplicaciones-con-chocolatey
http://blogs.itpro.es/octaviordz/2014/06/05/integrando-chocolatey-a-mdt-2013-e-instalando-aplicaciones-de-forma-desatendida-en-windows-8-1/
http://blogs.itpro.es/octaviordz/2014/10/31/probando-chocolatey-en-windows-10
http://blogs.itpro.es/octaviordz/2012/07/10/aplicaciones-desatendidas
MVP Jesús Octavio Rdz http://blogs.itpro.es/octaviordz

HT4623 I having difficulty in updating my iphone 3GS software from version 4.1 to version 5.1. I cannot update through my iphone & through itunes. Each time I tried a message appeared saying iphone software server cannot be contacted. Please, help

I am having difficulty in updating my iphone 3GS software from version 4.1 to version 5.1. I tried using my phone but cannot find the update software button even when I have gone through the right process by tapping SETTING, then GENERAL, yet could not find Update Software button. I mean the update Software button is not seen there.
I tried using itunes, yet no way. Each time I connect my iphone to my laptop itunes software comes up automatically and alerts me that a newer version of software for my iphone is available, It usually gives me the option of Download & Install or Download Only. Whichever of the option I click a message will always appear telling me that the iphone update server could not be contacted, then asking me to make sure that my network settings are correct and active or try again latter. Sometimes, when click on the Update button on my itune software. It will display an error has occured.
I have even tried to Restore iphone from itunes, yet the problem keep repeating itself.
Can anyone help me?

Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now.

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I wa

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanks

Can anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta.

Remote desktop client software not active

I'm sorry if this has been asked before but I'm a bit bewildered by this errormessage (and I couldn't get a hit when I searched for it) when I try to drag a file from the xserv to the macbook pro desktop, remote desktop client software not active.
The macbook has the ard server and connects to the xserv ppc. It connects over the internet.
The xserv is behind a iptables fw and I have forwarded 3283 tcp/udp plus 5900 udp/tcp to the server. Have I forgotten a port ?
I've read through http://www.starkpr.com/ard.htm as well as http://www.macosxhints.com/article.php?story=20070302234400232&query=vnc%2Bsimpl e%2Bset%2Bup
and tried to find out more from the discsussions here.
The macbook pro sits behind an airport which is hooked into the dsl modem. Do I need to configure port forward in the airport as well.
Connecting to the xserv and working on it works great but the copy file transfer fails.

Hi there I took new try at this and this is what finally solved it for me.
The earlier answer I got was very good advise but I had already done that bit, actually I might have overdone it a bit I had checked all the boxes under the useraccount on sharing.
Back to business.
Firewalling. I realised I need to open and portforward at both locations and remeber it's booth tcp and udp.
So at the xserve location I needed to forward 3283 and 5900 both tcp and udp from outside to the IPnumber of the xserve.
At home with my macbook I needed to do the same.
However this did not solve it, I had forgotten one software on the macbook. On the xserve I had installed ARD upgraded it to 3.1 AND installed the upgrade for ARD 3.1 client. The client part I had forgotten at home. So once my ARD and ARD client software matched I could connect to the xserve and drag and drop files booth ways.
ARD wasn't running on the xserve I just had it installed along with the client software.
So portforwarding in firewalls and the same software and versions in all locations seems to have solved it for me.
A small note enabling/disabling the firewall in macbookpro did nothing for me since when enabled ARD rules were in place and active so it still worked.
I hope I made some sense.
Message was edited by: tindome
Message was edited by: tindome

RMAN 11gr2 ORA-00308 when dulplicate database from active

Hi,
I'm trying to clone a production database (Oracle 11.2.0.3) from HP-UX IA64 to Solaris 10 (Sparc 64) (source on Filesystem, target on ASM)
the previous steps was done (same oracle software installation, same patches, sqlnet comunication, etc.)
but the RMAN fails at end of the process:
Recovery Manager: Release 11.2.0.3.0 - Production on Wed Aug 22 09:44:34 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: SIN (DBID=634625013)
connected to recovery catalog database
connected to auxiliary database: SIN (not mounted)
RMAN> run
+2> {+
+3> allocate channel c1 type disk;+
+4> allocate channel c2 type disk;+
+5> allocate channel c3 type disk;+
+6> allocate channel c4 type disk;+
+7> allocate auxiliary channel a1 type disk;+
+8> allocate auxiliary channel a2 type disk;+
+9> set newname for datafile 1 to '+DG_DATA';+
+10> set newname for datafile 2 to '+DG_DATA';+
+11> set newname for datafile 3 to '+DG_DATA';+
+12> set newname for datafile 4 to '+DG_DATA';+
+13> set newname for datafile 5 to '+DG_DATA';+
+14> set newname for datafile 6 to '+DG_DATA';+
+15> set newname for datafile 7 to '+DG_DATA';+
+16> set newname for datafile 8 to '+DG_DATA';+
+17> set newname for datafile 9 to '+DG_DATA';+
+18> set newname for datafile 10 to '+DG_DATA';+
+... to...+
+398> set newname for datafile 390 to '+DG_DATA';+
+399> set newname for datafile 391 to '+DG_DATA';+
+400> duplicate target database to "sin" from active database nofilenamecheck+
+401> DB_FILE_NAME_CONVERT=('/u10/oradata/sin/','+DG_DATA/',+
+402> '/u11/oradata/sin/','+DG_DATA/',+
+403> '/u07/oradata/sin/','+DG_DATA/',+
+404> '/u08/oradata/sin/','+DG_DATA/',+
+405> '/u09/oradata/sin/','+DG_DATA/');+
+406> }+
+407>+
starting full resync of recovery catalog
full resync complete
allocated channel: c1
channel c1: SID=1787 device type=DISK
allocated channel: c2
channel c2: SID=2406 device type=DISK
allocated channel: c3
channel c3: SID=850 device type=DISK
allocated channel: c4
channel c4: SID=1146 device type=DISK
allocated channel: a1
channel a1: SID=1325 device type=DISK
allocated channel: a2
channel a2: SID=1514 device type=DISK
executing command: SET NEWNAME
executing command: SET NEWNAME
+...+
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting Duplicate Db at 22-AUG-12
contents of Memory Script:
+{+
sql clone "create spfile from memory";
+}+
executing Memory Script
sql statement: create spfile from memory
contents of Memory Script:
+{+
shutdown clone immediate;
startup clone nomount;
+}+
executing Memory Script
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area    7317790720 bytes
Fixed Size                     2173456 bytes
Variable Size               3808433648 bytes
Database Buffers            3489660928 bytes
Redo Buffers                  17522688 bytes
allocated channel: a1
channel a1: SID=1325 device type=DISK
allocated channel: a2
channel a2: SID=758 device type=DISK
contents of Memory Script:
+{+
sql clone "alter system set control_files =
+''+DG_DATA/sin/controlfile/current.511.791978153'', ''+DG_DATA/sin/controlfile/current.562.791978153'' comment=+
+''Set by RMAN'' scope=spfile";+
+''+DG_DATA/sin/controlfile/current.511.791978153'', ''+DG_DATA/sin/controlfile/current.562.791978153'' comment=+
+''Set by RMAN'' scope=spfile";+
sql clone "alter system set db_name =
+''SIN'' comment=+
+''Modified by RMAN duplicate'' scope=spfile";+
+sql clone "alter system set db_unique_name =+
+''SIN'' comment=+
+''Modified by RMAN duplicate'' scope=spfile";+
+shutdown clone immediate;+
+startup clone force nomount+
+backup as copy current controlfile auxiliary format '+DG_DATA/sin/controlfile/current.512.791978153';+
+restore clone controlfile to '+DG_DATA/sin/controlfile/current.625.791978153' from+
+'+DG_DATA/sin/controlfile/current.512.791978153';+
+sql clone "alter system set control_files =+
+''+DG_DATA/sin/controlfile/current.512.791978153'', ''+DG_DATA/sin/controlfile/current.625.791978153'' comment=+
+''Set by RMAN'' scope=spfile";+
+shutdown clone immediate;+
+startup clone nomount;+
+alter clone database mount;+
+}+
+executing Memory Script+
+sql statement: alter system set control_files = ''+DG_DATA/sin/controlfile/current.511.791978153'', ''+DG_DATA/sin/controlfile/cu+
+rrent.562.791978153'' comment= ''Set by RMAN'' scope=spfile+
+sql statement: alter system set db_name = ''SIN'' comment= ''Modified by RMAN duplicate'' scope=spfile+
+sql statement: alter system set db_unique_name = ''SIN'' comment= ''Modified by RMAN duplicate'' scope=spfile+
+Oracle instance shut down+
+Oracle instance started+
+Total System Global Area 7317790720 bytes+
+Fixed Size 2173456 bytes+
+Variable Size 3808433648 bytes+
+Database Buffers 3489660928 bytes+
+Redo Buffers 17522688 bytes+
+allocated channel: a1+
+channel a1: SID=1514 device type=DISK+
+allocated channel: a2+
+channel a2: SID=2081 device type=DISK+
+Starting backup at 22-AUG-12+
+channel c1: starting datafile copy+
+copying current control file+
+output file name=/u06/tmpapp/rmanbkps/snapcf_sin.f tag=TAG20120822T094657 RECID=49 STAMP=791977621+
+channel c1: datafile copy complete, elapsed time: 00:00:01+
+Finished backup at 22-AUG-12+
+Starting restore at 22-AUG-12+
+channel a2: skipped, AUTOBACKUP already found+
+channel a1: copied control file copy+
+Finished restore at 22-AUG-12+
+sql statement: alter system set control_files = ''+DG_DATA/sin/controlfile/current.512.791978153'', ''+DG_DATA/sin/controlfile/cu+
+rrent.625.791978153'' comment= ''Set by RMAN'' scope=spfile+
+Oracle instance shut down+
+connected to auxiliary database (not started)+
+Oracle instance started+
+Total System Global Area 7317790720 bytes+
+Fixed Size 2173456 bytes+
+Variable Size 3808433648 bytes+
+Database Buffers 3489660928 bytes+
+Redo Buffers 17522688 bytes+
+allocated channel: a1+
+channel a1: SID=1514 device type=DISK+
+allocated channel: a2+
+channel a2: SID=2081 device type=DISK+
+database mounted+
+Using previous duplicated file +DG_DATA/sin/datafile/system.666.791914845 for datafile 1 with checkpoint SCN of 46164275052+
+Using previous duplicated file +DG_DATA/sin/datafile/undotbs1.678.791913821 for datafile 2 with checkpoint SCN of 46164227408+
+...+
+Using previous duplicated file +DG_DATA/sin/datafile/med_dat.498.791939115 for datafile 389 with checkpoint SCN of 46165353395+
+Using previous duplicated file +DG_DATA/sin/datafile/mytablespace.674.791914359 for datafile 390 with checkpoint SCN of 46164253329+
+Using previous duplicated file +DG_DATA/sin/datafile/med_dat.499.791939115 for datafile 391 with checkpoint SCN of 46165353396+
+contents of Memory Script:+
+{+
+sql 'alter system archive log current';+
+}+
+executing Memory Script+
+sql statement: alter system archive log current+
+contents of Memory Script:+
+{+
+backup as copy reuse+
+archivelog like "/u06/app/oracle/admin/sin/arch/SIN_0544862197_0001_0000065832.ARC" auxiliary format+
+"+DG_DATA" archivelog like+
+"/u06/app/oracle/admin/sin/arch/SIN_0544862197_0001_0000065833.ARC" auxiliary format+
+"+DG_DATA" archivelog like+
+"/u06/app/oracle/admin/sin/arch/SIN_0544862197_0001_0000065834.ARC" auxiliary format+
+"+DG_DATA" archivelog like+
+"/u06/app/oracle/admin/sin/arch/SIN_0544862197_0001_0000065835.ARC" auxiliary format+
+"+DG_DATA" archivelog like+
+"/u06/app/oracle/admin/sin/arch/SIN_0544862197_0001_0000065836.ARC" auxiliary format+
+"+DG_DATA" ;+
+catalog clone start with "+DG_DATA";+
+catalog clone datafilecopy "+DG_DATA/sin/datafile/system.666.791914845",+
+"+DG_DATA/sin/datafile/undotbs1.678.791913821",+
+"+DG_DATA/sin/datafile/undotbs1.679.791913821",+
+"+DG_DATA/sin/datafile/undotbs1.689.791913821",+
+"+DG_DATA/sin/datafile/undotbs1.690.791913821",+
+"+DG_DATA/sin/datafile/undotbs1.677.791914357",+
+"+DG_DATA/sin/datafile/drsys.621.791939555",+
+"+DG_DATA/sin/datafile/high_idx.663.791914889",+
+"+DG_DATA/sin/datafile/tools.507.791939555",+
+...+
+"+DG_DATA/sin/datafile/bkptemp.497.791939113",+
+"+DG_DATA/sin/datafile/med_dat.498.791939115",+
+"+DG_DATA/sin/datafile/mytablespace.674.791914359",+
+"+DG_DATA/sin/datafile/med_dat.499.791939115";+
+switch clone datafile 1 to datafilecopy+
+"+DG_DATA/sin/datafile/system.666.791914845";+
+switch clone datafile 2 to datafilecopy+
+"+DG_DATA/sin/datafile/undotbs1.678.791913821";+
+switch clone datafile 3 to datafilecopy+
+...+
+"+DG_DATA/sin/datafile/med_dat.498.791939115";+
+switch clone datafile 390 to datafilecopy+
+"+DG_DATA/sin/datafile/mytablespace.674.791914359";+
+switch clone datafile 391 to datafilecopy+
+"+DG_DATA/sin/datafile/med_dat.499.791939115";+
+}+
+executing Memory Script+
+Starting backup at 22-AUG-12+
+channel c1: starting archived log copy+
+input archived log thread=1 sequence=65832 RECID=48339 STAMP=791913640+
+channel c2: starting archived log copy+
+input archived log thread=1 sequence=65833 RECID=48340 STAMP=791933223+
+channel c3: starting archived log copy+
+input archived log thread=1 sequence=65834 RECID=48341 STAMP=791939052+
+channel c4: starting archived log copy+
+input archived log thread=1 sequence=65835 RECID=48342 STAMP=791962351+
+output file name=+DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65834.515.791978259 RECID=0 STAMP=0+
+channel c3: archived log copy complete, elapsed time: 00:00:35+
+channel c3: starting archived log copy+
+input archived log thread=1 sequence=65836 RECID=48343 STAMP=791977692+
+output file name=+DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65832.513.791978259 RECID=0 STAMP=0+
+channel c1: archived log copy complete, elapsed time: 00:00:51+
+output file name=+DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65833.514.791978259 RECID=0 STAMP=0+
+channel c2: archived log copy complete, elapsed time: 00:01:41+
+output file name=+DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65836.581.791978295 RECID=0 STAMP=0+
+channel c3: archived log copy complete, elapsed time: 00:01:06+
+output file name=+DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65835.516.791978259 RECID=0 STAMP=0+
+channel c4: archived log copy complete, elapsed time: 00:01:41+
+Finished backup at 22-AUG-12+
+searching for all files that match the pattern +DG_DATA+
+List of Files Unknown to the Database+
+=====================================+
+File Name: +dg_data/SIN/ARCHIVELOG/2012_08_22/thread_1_seq_65832.513.791978259+
+File Name: +dg_data/SIN/ARCHIVELOG/2012_08_22/thread_1_seq_65833.514.791978259+
+File Name: +dg_data/SIN/ARCHIVELOG/2012_08_22/thread_1_seq_65834.515.791978259+
+...+
+File Name: +dg_data/SIN/DATAFILE/XDB.508.791939555+
+File Name: +dg_data/SIN/DATAFILE/DRSYS.621.791939555+
+File Name: +dg_data/SIN/CONTROLFILE/Current.691.791913737+
+File Name: +dg_data/SIN/CONTROLFILE/Current.692.791913737+
+File Name: +dg_data/SIN/CONTROLFILE/Current.703.791913737+
+File Name: +dg_data/SIN/CONTROLFILE/Current.704.791913737+
+File Name: +dg_data/SIN/CONTROLFILE/Current.511.791978153+
+File Name: +dg_data/SIN/CONTROLFILE/Current.562.791978153+
+File Name: +dg_data/ASM/ASMPARAMETERFILE/REGISTRY.253.790861037+
+cataloging files...+
+cataloging done+
+List of Cataloged Files+
+=======================+
+File Name: +dg_data/SIN/ARCHIVELOG/2012_08_22/thread_1_seq_65832.513.791978259+
+File Name: +dg_data/SIN/ARCHIVELOG/2012_08_22/thread_1_seq_65833.514.791978259+
+File Name: +dg_data/SIN/ARCHIVELOG/2012_08_22/thread_1_seq_65834.515.791978259+
+File Name: +dg_data/SIN/ARCHIVELOG/2012_08_22/thread_1_seq_65835.516.791978259+
+...+
+File Name: +dg_data/SIN/DATAFILE/XDB.508.791939555+
+File Name: +dg_data/SIN/DATAFILE/DRSYS.621.791939555+
+File Name: +dg_data/SIN/CONTROLFILE/Current.703.791913737+
+File Name: +dg_data/SIN/CONTROLFILE/Current.704.791913737+
+List of Files Which Where Not Cataloged+
+=======================================+
+File Name: +dg_data/SIN/CONTROLFILE/Current.691.791913737+
+RMAN-07517: Reason: The file header is corrupted+
+File Name: +dg_data/SIN/CONTROLFILE/Current.692.791913737+
+RMAN-07517: Reason: The file header is corrupted+
+File Name: +dg_data/SIN/CONTROLFILE/Current.511.791978153+
+RMAN-07517: Reason: The file header is corrupted+
+File Name: +dg_data/SIN/CONTROLFILE/Current.562.791978153+
+RMAN-07517: Reason: The file header is corrupted+
+File Name: +dg_data/ASM/ASMPARAMETERFILE/REGISTRY.253.790861037+
+RMAN-07518: Reason: Foreign database file DBID: 0 Database Name:+
+cataloged datafile copy+
+datafile copy file name=+DG_DATA/sin/datafile/system.666.791914845 RECID=442 STAMP=791978374+
+cataloged datafile copy+
+datafile copy file name=+DG_DATA/sin/datafile/undotbs1.678.791913821 RECID=443 STAMP=791978375+
+cataloged datafile copy+
+datafile copy file name=+DG_DATA/sin/datafile/undotbs1.679.791913821 RECID=444 STAMP=791978375+
+cataloged datafile copy+
+datafile copy file name=+DG_DATA/sin/datafile/undotbs1.689.791913821 RECID=445 STAMP=791978375+
+cataloged datafile copy+
+...+
+datafile copy file name=+DG_DATA/sin/datafile/med_dat.498.791939115 RECID=830 STAMP=791978408+
+cataloged datafile copy+
+datafile copy file name=+DG_DATA/sin/datafile/mytablespace.674.791914359 RECID=831 STAMP=791978408+
+cataloged datafile copy+
+datafile copy file name=+DG_DATA/sin/datafile/med_dat.499.791939115 RECID=832 STAMP=791978408+
+datafile 1 switched to datafile copy+
+input datafile copy RECID=442 STAMP=791978374 file name=+DG_DATA/sin/datafile/system.666.791914845+
+datafile 2 switched to datafile copy+
+input datafile copy RECID=443 STAMP=791978375 file name=+DG_DATA/sin/datafile/undotbs1.678.791913821+
+datafile 3 switched to datafile copy+
+input datafile copy RECID=444 STAMP=791978375 file name=+DG_DATA/sin/datafile/undotbs1.679.791913821+
+datafile 4 switched to datafile copy+
+input datafile copy RECID=445 STAMP=791978375 file name=+DG_DATA/sin/datafile/undotbs1.689.791913821+
+...+
+datafile 389 switched to datafile copy+
+input datafile copy RECID=830 STAMP=791978408 file name=+DG_DATA/sin/datafile/med_dat.498.791939115+
+datafile 390 switched to datafile copy+
+input datafile copy RECID=831 STAMP=791978408 file name=+DG_DATA/sin/datafile/mytablespace.674.791914359+
+datafile 391 switched to datafile copy+
+input datafile copy RECID=832 STAMP=791978408 file name=+DG_DATA/sin/datafile/med_dat.499.791939115+
+contents of Memory Script:+
+{+
+set until scn 46167049411;+
+recover+
+clone database+
+delete archivelog+
+;+
+}+
+executing Memory Script+
+executing command: SET until clause+
+Starting recover at 22-AUG-12+
+starting media recovery+
+archived log for thread 1 with sequence 65832 is already on disk as file +DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65832.513.7+
+91978259+
+archived log for thread 1 with sequence 65833 is already on disk as file +DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65833.514.7+
+91978259+
+archived log for thread 1 with sequence 65834 is already on disk as file +DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65834.515.7+
+91978259+
+archived log for thread 1 with sequence 65835 is already on disk as file +DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65835.516.7+
+91978259+
+archived log for thread 1 with sequence 65836 is already on disk as file +DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65836.581.7+
+91978295+
+archived log file name=+DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65832.513.791978259 thread=1 sequence=65832+
+released channel: c1+
+released channel: c2+
+released channel: c3+
+released channel: c4+
+Oracle Error:+
+ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below+
+ORA-01194: file 1 needs more recovery to be consistent+
+ORA-01110: data file 1: '+DG_DATA/sin/datafile/system.666.791914845'+
*+released channel: a1+*
*+released channel: a2+*
*+RMAN-00571: ===========================================================+*
*+RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============+*
*+RMAN-00571: ===========================================================+*
*+RMAN-03002: failure of Duplicate Db command at 08/22/2012 09:52:27+*
*+RMAN-05501: aborting duplication of target database+*
*+RMAN-03015: error occurred in stored script Memory Script+*
*+RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '+DG_DATA/sin/archivelog/2012_08_22/thre+*
*+ad_1_seq_65832.513.791978259'+*
*+ORA-00308: cannot open archived log '+DG_DATA/sin/archivelog/2012_08_22/thread_1_seq_65832.513.791978259'+*
+Recovery Manager complete.+
the error is always the same, a previous backup with RMAN was taken on tape on the source database (production).
Please help me to find what is wrong here!!

Hi mseberg
that's exactly i'm doing:
1. Create an Oracle Password File for the Auxiliary Database
a. done, passwd file created*
2. Create the Directory Structure on the remote server
a. done, all the admin structure wa created.*
3. Oracle Net Setup ( you need an entry for the CLONE in your TNSNAMES.ORA on both servers ) ( I use SID_LIST_LISTENER entry for static )
a. done, i have the entries working on my tnsnames.ora (source and target with static listeners)*
4. Create an Initialization Parameter File for the Auxiliary Instance ( I use Parameters DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT to change locations)
a. done, this is my initialization file:*
*.audit_file_dest='/u01/app/oracle/admin/sin/adump'*
*.audit_trail='db'*
*.compatible='11.2.0.0.0'*
*.db_block_size=8192*
*.db_create_file_dest='DG_DATA'+*
*.db_domain=''*
*.db_files=2048*
*.db_name='sin'*
*.db_recovery_file_dest='DG_DATA'+*
*.db_recovery_file_dest_size=20G*
*.diagnostic_dest='/u01/app/oracle'*
*.dispatchers='(PROTOCOL=TCP) (SERVICE=sinXDB)'*
*.log_archive_format='%t_%s_%r.dbf'*
*.memory_target=7340032000*
*.open_cursors=300*
*.processes=2000*
*.remote_login_passwordfile='EXCLUSIVE'*
*.sessions=2205*
*.undo_tablespace='UNDOTBS1'*
DB_FILE_NAME_CONVERT=('/u10/oradata/sin/','DG_DATA/',+*
+'/u11/oradata/sin/','+DG_DATA/',+
+'/u07/oradata/sin/','+DG_DATA/',+
+'/u08/oradata/sin/','+DG_DATA/',+
+'/u09/oradata/sin/','+DG_DATA/')+
LOG_FILE_NAME_CONVERT=('/u04/oradata/sin/','DG_DATA/',+*
+'/u05/oradata/sin/','+DG_DATA/',+
+'/u03/oradata/sin/','+DG_DATA/',+
+'/u02/oradata/sin/','+DG_DATA/')+
and this is my command from RMAN:
run*
*+{+*
allocate channel c1 type disk;*
allocate channel c2 type disk;*
allocate channel c3 type disk;*
allocate channel c4 type disk;*
allocate auxiliary channel a1 type disk;*
allocate auxiliary channel a2 type disk;*
set newname for datafile 1 to 'DG_DATA';+*
set newname for datafile 2 to 'DG_DATA';+*
set newname for datafile 3 to 'DG_DATA';+*
set newname for datafile 4 to 'DG_DATA';+*
set newname for datafile 5 to 'DG_DATA';+*
set newname for datafile 6 to 'DG_DATA';+*
set newname for datafile 7 to 'DG_DATA';+*
set newname for datafile 8 to 'DG_DATA';+*
set newname for datafile 9 to 'DG_DATA';+*
set newname for datafile 10 to 'DG_DATA';+*
+...+
set newname for datafile 390 to 'DG_DATA';+*
set newname for datafile 391 to 'DG_DATA';+*
duplicate target database to "sin" from active database nofilenamecheck*
DB_FILE_NAME_CONVERT=('/u10/oradata/sin/','DG_DATA/',+*
+'/u11/oradata/sin/','+DG_DATA/',+
+'/u07/oradata/sin/','+DG_DATA/',+
+'/u08/oradata/sin/','+DG_DATA/',+
+'/u09/oradata/sin/','+DG_DATA/');+
+}+
do you think the problem may be in the name of the database?, I am using the same name in the auxiliary
and when I get the error, I have the same dbid in both databases (source and destination)
Thanks
MM

Failing by duplicate database from active database

Hallo,
i'm working with 11g on one server and want to duplicate a database in active mode.
what i do:
i create a new password-file using orapwd - orapwNEW
i create a new entry for ORANEW in tnsnames.ora and listener.ora
then i execute rman TARGET sys/xxx@old AUXILIARY sys/xxx@NEW
then rman> DUPLICATE TARGET DATABASE TO NEW FROM ACTIVE DATABASE SPFILE NOFILENAMECHECK;
then i've got the failure RMAN-06403, RMAN-04006, ORA-01034
whats the problem?
thanks in advance.

i think it is the problem that rman can't connect to the auxiliary db.
but what i must do?
in the documentation i found that:
The PASSWORD FILE option specifies that RMAN should copy the password file to the destination host. RMAN automatically copies the server parameter file to the destination host, starts the auxiliary instance with the server parameter file, copies all necessary database files and archived redo logs over the network to the destination host, and recovers the database. Finally, RMAN opens the database with the RESETLOGS option to create the online redo log.

How to set in Windows 8.1 the Account Picture from Active Directory

Hello All,
In my company I have uploaded the photos for
each employees in
Active Directory using a powershell script that set the attribute
thumbnailphoto.
This is useful for images in Lync and Outlook,
now I want to use these pictures
to sync with the account picture
in Windows 8.1 but I haven't found anything in internet that helps me
for this.
I hope someone can help me,
Thanks!

Hi,
You can try the steps in following article:
Using Pictures from Active Directory
http://msitpros.com/?p=1036
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
For your reference, here is the similar thread with different method:
http://social.technet.microsoft.com/Forums/en-US/d6e7b2c3-c343-4900-a01d-24bfb30357b6/is-there-a-solution-to-set-user-account-picture-from-active-directory-thumbnailphoto-attribute-in?forum=w8itproinstall
Hope these would be helpful.
Kate Li
TechNet Community Support

Blackberry Desktop Software - Request Option to Disable Software from Loading During Start-Up

After Blackberry Desktop Software automatic updates. Software become part of Start-Up option or menu. I do not want Blackberry Desktop Software to automatically load during Start-Up. The Desktop Software does not have a user friendly option to disable the desktop software from loading during start-up. Am writing you to add this feature to your desktop software. I've just completed loading v5.0.1 and again I need to hunt and peck a way through windows to delete this software from loading during start-up. This software needs to have a user friendly option to disable the desktop software from loading during start-up. When I loaded v4.x.x when I bought my blackberry your set-up wizard had this disable option, but all your subsequent software upgrades change my windows start-up to load blackberry desktop manager software. Please add this feature to your software.

Hello and Welcome to the Forums!
In regards to your hope that RIM will see your message -- these forums are a user-to-user support channel, not a user-to-RIM conduit. As such, it is unlikely that they will see what you have written. However, if you have specific and constructive ideas for them, I have heard that they accept such via email to [email protected]
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cluster: automatic push of software from Active to passive node?

Similar Messages

Maybe you are looking for