Cluster design with subscriber 10.X on VM to exisiting MCS 7835I running with v8.6

Hi
At present CUCM is running with single node MCS 7835I (v8.6) in cluster. Now planning to implement cluster by building subscriber with version 10.X on VM to existing MCS 7835I which remains as publisher.
Does cluster support dissimilar hardware and software mismatch setup ?
Also having plans to upgrade MCS H7835I to 9.1 later, is it possible ?
Thanks in advance

Thanks aton Jaime Valencia & Aman Soi
Now I understood. Publisher and subscriber in a cluster should have same version.
Here is the hardware details
MCS7835I3-K9-CMD2
HW Platform      : 7835I3
Processors      : 1
Type                : Intel(R) Xeon(R) CPU       (E5504 @ 2.00GHz)
CPU Speed         : 2000
Memory           : 4096 MBytes

Similar Messages

1 "simple" JMS topic and 2 cluster elements with OSB

Hi,
I have 1 simple jms topic (not distributed, not on migratable target) and cluster with 2 members - OSB as main application. My OSB proxy service reads from this topic and saves data to file.
The problem is that reading from topic appears twice - once by each cluster member. How to configure topic or proxy service for only one reading?

FYI - At this year's Oracle OpenWorld, which is being held in conjunction with this year's JavaOne, Oracle will be announcing a set of enhancements that are designed to cover this exact use case.
Tom Barnes
Session ID: S317469
Title: New Service-Oriented Architecture Patterns with Enterprise Grid Messaging
Abstract: Messaging systems are essential in enabling the flexibility and loosely coupled nature of a service-oriented architecture (SOA). Oracle WebLogic Java Message Service (JMS) includes new pub-sub capabilities that make architectures more adaptable, allowing message producers to be ignorant of who is the consumer of a message or how many consumers there are. It also enables easy scale out and dynamic adaptability through clustering and message-driven bean (MDB) enhancements, all while still guaranteeing strict message ordering. This session will outline new JMS capabilities and show how they enable new designs with Oracle WebLogic Server and Oracle Service Bus.
Speaker(s): Dongbo Xiao, Oracle, Principal Member of Technical Staff
Biography not available.
David Cabelus, Oracle USA, Senior Principal Product Manager
Dave Cabelus is a Senior Principal Product Manager in the WebLogic Server group at Oracle. Dave's responsibilities include product strategy and direction for various pieces of WebLogic Server, including Java Messaging, Operations and Management, Diagnostics, and various other initiatives, and previously included database connectivity, transactions, and Web tier integration. In the industry since 1996 and involved in Java since 1999, Dave worked at various software companies including Logic Works, Platinum Software, Kana, and a few startups before coming to Oracle (BEA) in 2001.
Event: JavaOne and Oracle Develop
Stream(s): ORACLE DEVELOP, DEVELOP
Track(s): Application Grid and Oracle WebLogic
Tags: Add
Session Type: Conference Session
Session Category: Features
Duration: 60 min.
Schedule: Thursday, September 23, 11:00AM | Hotel Nikko, Nikko Ballroom II Available
Edited by: TomB on Aug 12, 2010 1:21 PM

Cluster Design Example

Does anyone have a link to an example of a cluster design document? For example, a visio diagram showing ESXi hosts, networking, storage and all the various details of a cluster design that you need to document?

There are sample case studies documents available at Prepare for the VCDX Certification.
You can through with these document, and get familiar with the process.
Thx

Dual-DMVPN Design with Dual Hubs on a single router ??

Hi All,
In DMVPN, in Dual-DMVPN Design with Dual Hubs , can a single router perform the role of dual hubs.
The router has two different internet links. It is intended that when one link goes down, spokes shud connect to the same router onto the other active internet connection. Is this possible ?

Since no one has answered yet, I'll give you the practical answer.
You'll have issues with IPSec and static routing. "DMVPN" itself probably wouldn't have an issue, but it would depend on IPSec and routing to work.
It is easier, by far, to put in a second router. And when you factor in your time to try to make it work (and it may not work), the second router is less expensive.
Rob

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far.

I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far. I have gone to my app folder and tried to update my iPhoto Library. I have gone to my trash and brought it over to my desktop and still cannot use it. Please help!

Try this fix discovered by User photosb189:
From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
Select Library from the drop down menu
Then navigate to Application Support > iLifeAssetManagement > assets
Right click on the 'sub' folder and choose Compress
Drag the resulting zip file to your Desktop (as a backup)
Go to your System Preferences and choose iCloud
Turn OFF the iCloud Photos option
Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
Now, in System Preferences, turn the iCloud Photos option ON
iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.

How to master good design with EJB and JSP?

I use JSP to calling EJB. But the .jsp file is complex and it's difficult to maintain...I just want to work higher efficent with EJB,JSP and JavaBean. I want to know is there a good design with EJB and JSP? and is there any good material about MVC for EJB,JSP and JavaBean?

You should read the J2EE blueprint available on this website. Better download the PDF, and print it for yourself so you can read it anytime.

Designing with CSS in Design View

Hey guys, I'm working on learning CSS. One problem I'm having
is that while I'm working on the code, what shows in the design
view in dreamweaver isn't the same, (not even close), to what it
looks like in any browser. For example the location of a div will
be totally different.
It seems like it would be very hard to design this way. Why
doesn't dreamweaver attempt to reflect what it looks like in one of
the browsers. Is this just the way it is when designing with css?
If so, how the heck do people do it? Do you just have to keep
previewing the site every time you change the css?
Using dreamweaver MX
thanks, mike

> Using dreamweaver MX
Sadly, that's the dullest knife in the drawer. Is it DMX6.0
or 6.1?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"southdaytona" <[email protected]> wrote in
message
news:f08qoq$bed$[email protected]..
> Hey guys, I'm working on learning CSS. One problem I'm
having is that
> while
> I'm working on the code, what shows in the design view
in dreamweaver
> isn't the
> same, (not even close), to what it looks like in any
browser. For
> example the
> location of a div will be totally different.
>
> It seems like it would be very hard to design this way.
Why doesn't
> dreamweaver attempt to reflect what it looks like in one
of the browsers.
> Is
> this just the way it is when designing with css? If so,
how the heck do
> people
> do it? Do you just have to keep previewing the site
every time you change
> the
> css?
>
> Using dreamweaver MX
>
> thanks, mike
>

Looking for a designer with experience working on Motorsport projects

I am looking for a web designer with specific experience working on Motorsport websites. The project will be to design a BC site for a racing team which we will implement. If you believe you are qualified for a project like this please send me details of your portfolio and your rate. Note I am looking for someone who has actually worked on motorsport website, so will need to see evidence of this experience. If you do not have this experience please do not apply. Please PM me if you are qualified.

Hi Sir/Madam,
I recently Completed my PG Diploma Graduate in Industrial Automation and System Design from National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.I am good labVIEW Programmer and I am seeking job in labVIEW Sector, please help me where i could get the job in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
E-mail: [email protected]
Attachments:
resume ravi new formetpdf.pdf ‏65 KB

Native Multi-VRF-Lite Design with EIGRP Question

Hello,
we think about to implement a VRF-Lite design (no MPLS and MBGP) in our campus network (10,000 ports, 20x 6500Sup720, 400x L2-Switches). MPLS is from our point of view oversized for our requirements. We need only a segmentation from different departments. Our IGP is eigrp.
In the latest IOS-Release for the cat6500 (12.2.18SXD) is finally a VRF-Lite support for EIGRP inside.
We could test successful a design with different VRFs in our lab, the division workes fine. But we didn't found a way to implement shared service. These are in our case DHCP, DNS, InternerAccess and some others. We thought about a redistribution between our global EIGRP routing table and the EIGRP-vrf tables, but we didn't found a way to do this.
How can we do this?
Thanks

Use a crossover cable to connect a port belonging to the global routing table to a port belonging to a VRF. This way you can leak EIGRP routes from the global routing table into the VRF (through that physical connection). The drawback is that you use 2 ports (that could instead be used for other things...).
Another way to this, would be to use static routing; use ip route vrf VRF x.x.x.x m.m.m.m n.n.n.n global to allow traffic to go from the VRF into the global routing table.
Hope that helps...

Will Java UFLs satisfy reports designed with COM UFLs

cr_xi_java_ufl.pdf notes that "When using Crystal Reports" to design reports that contain user-defined function libraries (UFL), you can use only Java UFLs or only COM UFLs, but not both".
Is that purely a statement about configuring the Developer to access the UFLs or does it indicate some sort of distinction between COM and Java UFLs.
In particular can I take a report designed on Microsoft Windows and including a call to a UF that happened to be exposed by a COM UFL and then run it under Crystal Reports Server XI R2 for Linux using JRC and have the function call evaluated by a Java UF of the same signature within a Java UFL?

Business Objects led me wrong. Java UFLs DO satisfy reports designed with COM UFLs.
If I take a report that was designed under Microsoft Windows and I added functions that were there via COM UFLs (certainly I have proved it by typing the UFL name in directly into the formula editor; I presume it will also work if you drag the COM UFL into the formula editor) and I then place that rpt file on my Linux machine and view that report using Crystal Reports Server XI R2 and Tomcat and JRC and I have Java UFLs on that Linux machine that have the same name and arguments as the COM one then the report runs OK and the Java UFLs do their job.
(Now that is great news)

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

How to get cluster name with c++ API?

Hi everyone,
I want to get cluster name with c++ API, do you know how to do that?
Thanks very much!!!
Guangyin

937347 wrote:
Hi Robert,
For Java, we can get the cluster name like this:
cache.getCacheService.getCluster().getClusterName(),
for c++, just as you said, do you mean that i can try to get cluster name like this:
Sting::View name = cache->getCacheService()->getInfo()->getServiceName();
InvocationService::handle invocation = cast<InvocationService::handle>(CacheFactory::getService(name));
String clusterName = invocation->getInfo()->getServiceName();
But i can not get the right result.
I know little about how to use InvocationService, could you give me example?
Thanks very much!!!
GuangyinHi Guangyin,
I do not know the C++ API, I never used it, but what you wrote definitely does not look right.
InvocationService is a way to send arbitrary Java logic (you need to write both the Java logic and a C++ counterpart class, the C++ class will serialize itself with POF and the Java class will deserialize the same data appropriately) as a command to the cluster via the TCP*Extend connection and the command would execute on the proxy node and thus it would have access to the cluster itself.
You probably should start with the documentation of the Coherence*Extend C++ API documentation for samples.
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/toc.htm
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/cpp_part.htm#CHDHCIEJ
Best regards,
Robert

I would like to inquire about the design of iphone 5 .. why, iphone 5 is designed with a slightly wider screen ..?

I would like to inquire about the design of iphone 5 .. why, iphone 5 is designed with a slightly wider screen ..?

Apple's design team was looking to build an iphone with a screen that had a 16:9 aspect ratio. Call it pressure to keep up with the competition.
Plus, LTE is so FAST! Time to turn up the speed!

Transparent design with router on both sides?

I am looking to solve a design which has to work in two scenarios. Preferably with an in-line solution.
1. Transparent design with VRF on both sides:
FW-VRF (Subnet A)
      |
      | (VLAN 11)      | ACE (Subnet A)
      |
      | (VLAN 12)
      |
LAN-VRF
      |
      | (VLAN 13)
      |
Real servers (Subnet B)
2. Transparent design in plain bridge mode
FW-VRF (Subnet A)
      |
      | (VLAN 11)      |
   ACE (Subnet A)
      |
      | (VLAN 12)
      |
Real servers (Subnet A)
As mentioned, I am aiming for a single design for both scenarios. A routed design will not pass in the first scenario and a one-arm solution will be inefficient in the second scenario. (both due to existing infrastructure) Is it possible to solve this with a transparent solution in both scenarios? I can't seem to get it to work.
Thanks in advance for any help!

I'm gonna expand my question a bit as I can not seem to get a working config in scenario 1. From the ACE I can ping the VRFs on both side of the ACE. I can on the other hand not ping neither the bvi-address of the ACE nor one VRF from the other. Can anyone notice any immediate errors in my config? Thanks in advance for any help!
Addresses:
10.3.66.1 - FW_VRF on client side
10.3.66.6 - LAN_VRF on server side
10.3.66.7 - BVI if on ACE
===Admin===
resource-class TEST_res
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-mz.A3_2_0.bin
hostname 4710Appl
interface gigabitEthernet 1/1
description Management port
switchport access vlan 752
no shutdown
interface gigabitEthernet 1/2
description Client side LAN
switchport trunk allowed vlan 2522
no shutdown
interface gigabitEthernet 1/3
description Server side LAN
switchport trunk allowed vlan 2524
no shutdown
interface gigabitEthernet 1/4
shutdown
access-list BPDU ethertype permit bpdu
access-list ALL line 8 extended permit ip any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
2 match protocol ssh any
3 match protocol icmp any
4 match protocol snmp any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
interface vlan 752
description Management VLAN
ip address 10.7.52.63 255.255.255.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 10.3.66.1
context TEST_context
allocate-interface vlan 752
allocate-interface vlan 2522
allocate-interface vlan 2524
member TEST_res
context TEST_context_routed
username admin password 5 $1$bale5EiS$bEdquz.bbcW3wRcfeSzbu/ role Admin domain
default-domain
username www password 5 $1$bsOdgxav$1uywtkwFEj3QalKaOTrkZ1 role Admin domain de
fault-domain
ssh key rsa 1024 force
===Application context===
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
2 match protocol ssh any
3 match protocol icmp any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
interface vlan 752
ip address 10.7.52.64 255.255.255.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 2522
description Client side VLAN
bridge-group 1
access-group input ALL
access-group output ALL
no shutdown
interface vlan 2524
description Server side VLAN
bridge-group 1
access-group input ALL
access-group output ALL
no shutdown
interface bvi 1
ip address 10.3.66.7 255.255.255.240
no shutdown
ip route 0.0.0.0 0.0.0.0 10.3.66.1

Start a cluster locally with 2 nodes

Hi,
I just want to ask that how to start a cluster locally with 2 nodes?
By default i think that it starts only 1.
Thanks

Hi,
Just start another instance of the same process using the same coherence configuration and they will form a cluster.
mark

Cluster design with subscriber 10.X on VM to exisiting MCS 7835I running with v8.6

Similar Messages

Maybe you are looking for