Cluster disk failed - 2 node multisite cluster

i am setting up a 2 node , 2 site cluster with no shared disks. on each node I have a C, D and E drive.
file share witness is setup on a 3rd site as a share.
when i go to failover cluster administrator, I see that cluster disk 1 and 2 are failed. any idea why?

Hi,
From your description “2 site cluster with no shared disks. on each node I have a C, D and E drive.“ it seems you didn’t setup the CSV disk, but in the server 2008 or above
system edition failover cluster the CSV is the necessary condition, you must setup the CSV disk first.
If you want to create one failover cluster in the Geographically separated site, please refer the following related article first.
SQL Server 2012 AlwaysOn – Part 4 – SAP configuration in Geo-Cluster configuration
http://blogs.msdn.com/b/saponsqlserver/archive/2012/02/29/sql-server-2012-alwayson-part-4-sap-configuration-in-geo-cluster-configuration.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • 11g R2 RAC - Grid Infrastructure installation - "root.sh" fails on node#2

    Hi there,
    I am trying to create a two node 11g R2 RAC on OEL 5.5 (32-bit) using VMWare virtual machines. I have correctly configured both nodes. Cluster Verification utility returns on following error \[which I believe can be ignored]:
    Checking daemon liveness...
    Liveness check failed for "ntpd"
    Check failed on nodes:
    rac2,rac1
    PRVF-5415 : Check to see if NTP daemon is running failed
    Clock synchronization check using Network Time Protocol(NTP) failed
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    While Grid Infrastructure installation (for a Cluster option), things go very smooth until I run "root.sh" on node# 2. orainstRoot.sh ran OK on both. "root.sh" run OK on node# 1 and ends with:
    Checking swap space: must be greater than 500 MB.   Actual 1967 MB    Passed
    The inventory pointer is located at /etc/oraInst.loc
    The inventory is located at /u01/app/oraInventory
    *'UpdateNodeList' was successful.*
    *[root@rac1 ~]#*
    "root.sh" fails on rac2 (2nd node) with following error:
    CRS-2672: Attempting to start 'ora.evmd' on 'rac2'
    CRS-2676: Start of 'ora.evmd' on 'rac2' succeeded
    Timed out waiting for the CRS stack to start.
    *[root@rac2 ~]#*
    I know this info may not be enough to figure out what the problem may be. Please let me know what should I look for to find the issue and fix it. Its been like almost two weeks now :-(
    Regards
    Amer

    Hi Zheng,
    ocssd.log is HUGE. So I am putting few of the last lines in the log file hoping they may give some clue:
    2011-07-04 19:49:24.007: [    CSSD][2997803920]clssnmvSchedDiskThreads: KillBlockThread for voting file ORCL:DATA sched delay 2180 > margin 1500  cur_ms 36118424 lastalive 36116244
    2011-07-04 19:49:26.005: [    CSSD][2997803920]clssnmvSchedDiskThreads: DiskPingThread for voting file ORCL:DATA sched delay 4150 > margin 1500 cur_ms 36120424 lastalive 36116274
    2011-07-04 19:49:26.006: [    CSSD][2997803920]clssnmvSchedDiskThreads: KillBlockThread for voting file ORCL:DATA sched delay 4180 > margin 1500  cur_ms 36120424 lastalive 36116244
    2011-07-04 19:49:27.997: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:49:27.997: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:49:33.001: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:49:33.001: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:49:37.996: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:49:37.996: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:49:43.000: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:49:43.000: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:49:48.004: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:49:48.005: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:50:12.003: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:50:12.008: [    CSSD][2997803920]clssnmvSchedDiskThreads: DiskPingThread for voting file ORCL:DATA sched delay 1660 > margin 1500 cur_ms 36166424 lastalive 36164764
    2011-07-04 19:50:12.009: [    CSSD][2997803920]clssnmvSchedDiskThreads: KillBlockThread for voting file ORCL:DATA sched delay 1660 > margin 1500  cur_ms 36166424 lastalive 36164764
    2011-07-04 19:50:15.796: [    CSSD][2997803920]clssnmvSchedDiskThreads: KillBlockThread for voting file ORCL:DATA sched delay 2130 > margin 1500  cur_ms 36170214 lastalive 36168084
    2011-07-04 19:50:16.996: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:50:16.996: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:50:17.826: [    CSSD][2997803920]clssnmvSchedDiskThreads: DiskPingThread for voting file ORCL:DATA sched delay 1540 > margin 1500 cur_ms 36172244 lastalive 36170704
    2011-07-04 19:50:17.826: [    CSSD][2997803920]clssnmvSchedDiskThreads: KillBlockThread for voting file ORCL:DATA sched delay 1570 > margin 1500  cur_ms 36172244 lastalive 36170674
    2011-07-04 19:50:21.999: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:50:21.999: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:50:26.011: [    CSSD][2997803920]clssnmvSchedDiskThreads: DiskPingThread for voting file ORCL:DATA sched delay 1740 > margin 1500 cur_ms 36180424 lastalive 36178684
    2011-07-04 19:50:26.011: [    CSSD][2997803920]clssnmvSchedDiskThreads: KillBlockThread for voting file ORCL:DATA sched delay 1620 > margin 1500  cur_ms 36180424 lastalive 36178804
    2011-07-04 19:50:27.004: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:50:27.004: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:50:28.002: [    CSSD][2997803920]clssnmvSchedDiskThreads: DiskPingThread for voting file ORCL:DATA sched delay 1700 > margin 1500 cur_ms 36182414 lastalive 36180714
    2011-07-04 19:50:28.002: [    CSSD][2997803920]clssnmvSchedDiskThreads: KillBlockThread for voting file ORCL:DATA sched delay 1790 > margin 1500  cur_ms 36182414 lastalive 36180624
    2011-07-04 19:50:31.998: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:50:31.998: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    2011-07-04 19:50:37.001: [    CSSD][2901298064]clssnmSendingThread: sending status msg to all nodes
    2011-07-04 19:50:37.002: [    CSSD][2901298064]clssnmSendingThread: sent 5 status msgs to all nodes
    *<end of log file>*And the alertrac2.log contains:
    *[root@rac2 rac2]# cat alertrac2.log*
    Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
    2011-07-02 16:43:51.571
    [client(16134)]CRS-2106:The OLR location /u01/grid/oracle/product/11.2.0/grid/cdata/rac2.olr is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/client/ocrconfig_16134.log.
    2011-07-02 16:43:57.125
    [client(16134)]CRS-2101:The OLR was formatted using version 3.
    2011-07-02 16:44:43.214
    [ohasd(16188)]CRS-2112:The OLR service started on node rac2.
    2011-07-02 16:45:06.446
    [ohasd(16188)]CRS-2772:Server 'rac2' has been assigned to pool 'Free'.
    2011-07-02 16:53:30.061
    [ohasd(16188)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
    2011-07-02 16:53:55.042
    [cssd(17674)]CRS-1713:CSSD daemon is started in exclusive mode
    2011-07-02 16:54:38.334
    [cssd(17674)]CRS-1707:Lease acquisition for node rac2 number 2 completed
    [cssd(17674)]CRS-1636:The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1 and is terminating; details at (:CSSNM00006:) in /u01/grid/oracle/product/11.2.0/grid/log/rac2/cssd/ocssd.log
    2011-07-02 16:54:38.464
    [cssd(17674)]CRS-1603:CSSD on node rac2 shutdown by user.
    2011-07-02 16:54:39.174
    [ohasd(16188)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'rac2'.
    2011-07-02 16:55:43.430
    [cssd(17945)]CRS-1713:CSSD daemon is started in clustered mode
    2011-07-02 16:56:02.852
    [cssd(17945)]CRS-1707:Lease acquisition for node rac2 number 2 completed
    2011-07-02 16:56:04.061
    [cssd(17945)]CRS-1605:CSSD voting file is online: ORCL:DATA; details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/cssd/ocssd.log.
    2011-07-02 16:56:18.350
    [cssd(17945)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rac1 rac2 .
    2011-07-02 16:56:29.283
    [ctssd(18020)]CRS-2403:The Cluster Time Synchronization Service on host rac2 is in observer mode.
    2011-07-02 16:56:29.551
    [ctssd(18020)]CRS-2407:The new Cluster Time Synchronization Service reference node is host rac1.
    2011-07-02 16:56:29.615
    [ctssd(18020)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 16:56:29.616
    [ctssd(18020)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 16:56:29.641
    [ctssd(18020)]CRS-2401:The Cluster Time Synchronization Service started on host rac2.
    [client(18052)]CRS-10001:ACFS-9327: Verifying ADVM/ACFS devices.
    [client(18056)]CRS-10001:ACFS-9322: done.
    2011-07-02 17:01:40.963
    [ohasd(16188)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.asm'. Details at (:CRSPE00111:) in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ohasd/ohasd.log.
    [client(18590)]CRS-10001:ACFS-9327: Verifying ADVM/ACFS devices.
    [client(18594)]CRS-10001:ACFS-9322: done.
    2011-07-02 17:27:46.385
    [ctssd(18020)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 17:27:46.385
    [ctssd(18020)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 17:46:48.717
    [crsd(22519)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:46:49.641
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:46:51.459
    [crsd(22553)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:46:51.776
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:46:53.928
    [crsd(22574)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:46:53.956
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:46:55.834
    [crsd(22592)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:46:56.273
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:46:57.762
    [crsd(22610)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:46:58.631
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:47:00.259
    [crsd(22628)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:47:00.968
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:47:02.513
    [crsd(22645)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:47:03.309
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:47:05.081
    [crsd(22663)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:47:05.770
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:47:07.796
    [crsd(22681)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:47:08.257
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:47:10.733
    [crsd(22699)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:47:11.739
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:47:13.547
    [crsd(22732)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 17:47:14.111
    [ohasd(16188)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 17:47:14.112
    [ohasd(16188)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
    2011-07-02 17:58:18.459
    [ctssd(18020)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 17:58:18.459
    [ctssd(18020)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    [client(26883)]CRS-10001:ACFS-9200: Supported
    2011-07-02 18:13:34.627
    [ctssd(18020)]CRS-2405:The Cluster Time Synchronization Service on host rac2 is shutdown by user
    2011-07-02 18:13:42.368
    [cssd(17945)]CRS-1603:CSSD on node rac2 shutdown by user.
    2011-07-02 18:15:13.877
    [client(27222)]CRS-2106:The OLR location /u01/grid/oracle/product/11.2.0/grid/cdata/rac2.olr is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/client/ocrconfig_27222.log.
    2011-07-02 18:15:14.011
    [client(27222)]CRS-2101:The OLR was formatted using version 3.
    2011-07-02 18:15:23.226
    [ohasd(27261)]CRS-2112:The OLR service started on node rac2.
    2011-07-02 18:15:23.688
    [ohasd(27261)]CRS-8017:location: /etc/oracle/lastgasp has 2 reboot advisory log files, 0 were announced and 0 errors occurred
    2011-07-02 18:15:24.064
    [ohasd(27261)]CRS-2772:Server 'rac2' has been assigned to pool 'Free'.
    2011-07-02 18:16:29.761
    [ohasd(27261)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
    2011-07-02 18:16:30.190
    [gpnpd(28498)]CRS-2328:GPNPD started on node rac2.
    2011-07-02 18:16:41.561
    [cssd(28562)]CRS-1713:CSSD daemon is started in exclusive mode
    2011-07-02 18:16:49.111
    [cssd(28562)]CRS-1707:Lease acquisition for node rac2 number 2 completed
    2011-07-02 18:16:49.166
    [cssd(28562)]CRS-1605:CSSD voting file is online: ORCL:DATA; details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/cssd/ocssd.log.
    [cssd(28562)]CRS-1636:The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1 and is terminating; details at (:CSSNM00006:) in /u01/grid/oracle/product/11.2.0/grid/log/rac2/cssd/ocssd.log
    2011-07-02 18:17:01.122
    [cssd(28562)]CRS-1603:CSSD on node rac2 shutdown by user.
    2011-07-02 18:17:06.917
    [ohasd(27261)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'rac2'.
    2011-07-02 18:17:23.602
    [mdnsd(28485)]CRS-5602:mDNS service stopping by request.
    2011-07-02 18:17:36.217
    [gpnpd(28732)]CRS-2328:GPNPD started on node rac2.
    2011-07-02 18:17:43.673
    [cssd(28794)]CRS-1713:CSSD daemon is started in clustered mode
    2011-07-02 18:17:49.826
    [cssd(28794)]CRS-1707:Lease acquisition for node rac2 number 2 completed
    2011-07-02 18:17:49.865
    [cssd(28794)]CRS-1605:CSSD voting file is online: ORCL:DATA; details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/cssd/ocssd.log.
    2011-07-02 18:18:03.049
    [cssd(28794)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rac1 rac2 .
    2011-07-02 18:18:06.160
    [ctssd(28861)]CRS-2403:The Cluster Time Synchronization Service on host rac2 is in observer mode.
    2011-07-02 18:18:06.220
    [ctssd(28861)]CRS-2407:The new Cluster Time Synchronization Service reference node is host rac1.
    2011-07-02 18:18:06.238
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 18:18:06.239
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 18:18:06.794
    [ctssd(28861)]CRS-2401:The Cluster Time Synchronization Service started on host rac2.
    [client(28891)]CRS-10001:ACFS-9327: Verifying ADVM/ACFS devices.
    [client(28895)]CRS-10001:ACFS-9322: done.
    2011-07-02 18:18:33.465
    [crsd(29020)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:33.575
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:35.757
    [crsd(29051)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:36.129
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:38.596
    [crsd(29066)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:39.146
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:41.058
    [crsd(29085)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:41.435
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:44.255
    [crsd(29101)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:45.165
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:47.013
    [crsd(29121)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:47.409
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:50.071
    [crsd(29136)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:50.118
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:51.843
    [crsd(29156)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:52.373
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:54.361
    [crsd(29171)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:54.772
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:56.620
    [crsd(29202)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:57.104
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:58.997
    [crsd(29218)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/crsd/crsd.log.
    2011-07-02 18:18:59.301
    [ohasd(27261)]CRS-2765:Resource 'ora.crsd' has failed on server 'rac2'.
    2011-07-02 18:18:59.302
    [ohasd(27261)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
    2011-07-02 18:49:58.070
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 18:49:58.070
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 19:21:33.362
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 19:21:33.362
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 19:52:05.271
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 19:52:05.271
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 20:22:53.696
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 20:22:53.696
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 20:53:43.949
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 20:53:43.949
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 21:24:32.990
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 21:24:32.990
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 21:55:21.907
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 21:55:21.908
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 22:26:45.752
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 22:26:45.752
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 22:57:54.682
    [ctssd(28861)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/grid/oracle/product/11.2.0/grid/log/rac2/ctssd/octssd.log.
    2011-07-02 22:57:54.683
    [ctssd(28861)]CRS-2409:The clock on host rac2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
    2011-07-02 23:07:28.603
    [cssd(28794)]CRS-1612:Network communication with node rac1 (1) missing for 50% of timeout interval.  Removal of this node from cluster in 14.020 seconds
    2011-07-02 23:07:35.621
    [cssd(28794)]CRS-1611:Network communication with node rac1 (1) missing for 75% of timeout interval.  Removal of this node from cluster in 7.010 seconds
    2011-07-02 23:07:39.629
    [cssd(28794)]CRS-1610:Network communication with node rac1 (1) missing for 90% of timeout interval.  Removal of this node from cluster in 3.000 seconds
    2011-07-02 23:07:42.641
    [cssd(28794)]CRS-1632:Node rac1 is being removed from the cluster in cluster incarnation 205080558
    2011-07-02 23:07:44.751
    [cssd(28794)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rac2 .
    2011-07-02 23:07:45.326
    [ctssd(28861)]CRS-2407:The new Cluster Time Synchronization Service reference node is host rac2.
    2011-07-04 19:46:26.008
    [ohasd(27261)]CRS-8011:reboot advisory message from host: rac1, component: mo155738, with time stamp: L-2011-07-04-19:44:43.318
    [ohasd(27261)]CRS-8013:reboot advisory message text: clsnomon_status: need to reboot, unexpected failure 8 received from CSS
    *[root@rac2 rac2]#* This log file start with complaint that OLR is not accessible. Here is what I see (rca2):
    -rw------- 1 root oinstall 272756736 Jul  2 18:18 /u01/grid/oracle/product/11.2.0/grid/cdata/rac2.olrAnd I guess rest of the problems start with this.

  • Shared storage check failed on nodes

    hi friends,
    I am installing rac 10g on vmware and os is OEL4.i completed all the prerequisites but when i run the below command
    ./runclufy stage -post hwos -n rac1,rac2, i am facing below error.
    node connectivity check failed.
    Checking shared storage accessibility...
    WARNING:
    Unable to determine the sharedness of /dev/sde on nodes:
    rac2,rac2,rac2,rac2,rac2,rac1,rac1,rac1,rac1,rac1
    Shared storage check failed on nodes "rac2,rac1"
    please help me anyone ,it's urgent
    Thanks,
    poorna.
    Edited by: 958010 on 3 Oct, 2012 9:47 PM

    Hello,
    It seems that your storage is not accessible from both the nodes. If you want you can follow these steps to configure 10g RAC on VMware.
    Steps to configure Two Node 10 RAC on RHEL-4
    Remark-1: H/W requirement for RAC
    a) 4 Machines
    1. Node1
    2. Node2
    3. storage
    4. Grid Control
    b) 2 switchs
    c) 6 straight cables
    Remark-2: S/W requirement for RAC
    a) 10g cluserware
    b) 10g database
    Both must have the same version like (10.2.0.1.0)
    Remark-3: RPMs requirement for RAC
    a) all 10g rpms (Better to use RHEL-4 and choose everything option to install all the rpms)
    b) 4 new rpms are required for installations
    1. compat-gcc-7.3-2.96.128.i386.rpm
    2. compat-gcc-c++-7.3-2.96.128.i386.rpm
    3. compat-libstdc++-7.3-2.96.128.i386.rpm
    4. compat-libstdc++-devel-7.3-2.96.128.i386.rpm
    ------------ Start Machine Preparation --------------------
    1. Prepare 3 machines
    i. node1.oracle.com
    etho (192.9.201.183) - for public network
    eht1 (10.0.0.1) - for private n/w
    gateway (192.9.201.1)
    subnet (255.255.255.0)
    ii. node2.oracle.com
    etho (192.9.201.187) - for public network
    eht1 (10.0.0.2) - for private n/w
    gateway (192.9.201.1)
    subnet (255.255.255.0)
    iii. openfiler.oracle.com
    etho (192.9.201.182) - for public network
    gateway (192.9.201.1)
    subnet (255.255.255.0)
    NOTE:-
    -- Here eth0 of all the nodes should be connected by Public N/W using SWITCH-1
    -- eth1 of all the nodes should be connected by Private N/W using SWITCH-2
    2. network Configuration
    #vim /etc/host
    192.9.201.183 node1.oracle.com node1
    192.9.201.187 node2.oracle.com node2
    192.9.201.182 openfiler.oracle.com openfiler
    10.0.0.1 node1-priv.oracle.com node1
    10.0.0.2 node2-priv.oracle.com node2-priv
    192.9.201.184 node1-vip.oracle.com node1-vip
    192.9.201.188 node2-vip.oracle.com node2-vip
    2. Prepare Both the nodes for installation
    a. Set Kernel Parameters (/etc/sysctl.conf)
    kernel.shmall = 2097152
    kernel.shmmax = 2147483648
    kernel.shmmni = 4096
    kernel.sem = 250 32000 100 128
    fs.file-max = 65536
    net.ipv4.ip_local_port_range = 1024 65000
    net.core.rmem_default = 262144
    net.core.rmem_max = 262144
    net.core.wmem_default = 262144
    net.core.wmem_max = 262144
    b. Configure /etc/security/limits.conf file
    oracle soft nproc 2047
    oracle hard nproc 16384
    oracle soft nofile 1024
    oracle hard nofile 65536
    c. Configure /etc/pam.d/login file
    session required /lib/security/pam_limits.so
    d. Create user and groups on both nodes
    # groupadd oinstall
    # groupadd dba
    # groupadd oper
    # useradd -g oinstall -G dba oracle
    # passwd oracle
    e. Create required directories and set the ownership and permission.
    # mkdir –p /u01/crs1020
    # mkdir –p /u01/app/oracle/product/10.2.0/asm
    # mkdir –p /u01/app/oracle/product/10.2.0/db_1
    # chown –R oracle:oinstall /u01/
    # chmod –R 755 /u01/
    f. Set the environment variables
    $ vi .bash_profile
    ORACLE_BASE=/u01/app/oracle/; export ORACLE_BASE
    ORA_CRS_HOME=/u01/crs1020; export ORA_CRS_HOME
    #LD_ASSUME_KERNEL=2.4.19; export LD_ASSUME_KERNEL
    #LANG=”en_US”; export LANG
    3. storage configuration
    PART-A Open-filer Set-up
    Install openfiler on a machine (Leave 60GB free space on the hdd)
    a) Login to root user
    b) Start iSCSI target service
    # service iscsi-target start
    # chkconfig –level 345 iscsi-target on
    PART –B Configuring Storage on openfiler
    a) From any client machine open the browser and access openfiler console (446 ports).
    https://192.9.201.182:446/
    b) Open system tab and update the local N/W configuration for both nodes with netmask (255.255.255.255).
    c) From the Volume tab click "create a new physical volume group".
    d) From "block Device managemrnt" click on "(/dev/sda)" option under 'edit disk' option.
    e) Under "Create a partition in /dev/sda" section create physical Volume with full size and then click on 'CREATE'.
    f) Then go to the "Volume Section" on the right hand side tab and then click on "Volume groups"
    g) Then under the "Create a new Volume Group" specify the name of the volume group (ex- racvgrp) and click on the check box and then click on "Add Volume Group".
    h) Then go to the "Volume Section" on the right hand side tab and then click on "Add Volumes" and then specify the Volume name (ex- racvol1) and use all space and specify the "Filesytem/Volume type" as ISCSI and then click on CREATE.
    i) Then go to the "Volume Section" on the right hand side tab and then click on "iSCSI Targets" and then click on ADD button to add your Target IQN.
    j) then goto the 'LUN Mapping" and click on "MAP".
    k) then goto the "Network ACL" and allow both node from there and click on UPDATE.
    Note:- To create multiple volumes with openfiler we need to use Multipathing that is quite complex that’s why here we are going for a single volume. Edit the property of each volume and change access to allow.
    f) install iscsi-initiator rpm on both nodes to acces iscsi disk
    #rpm -ivh iscsi-initiator-utils-----------
    g) Make entry in iscsi.conf file about openfiler on both nodes.
    #vim /etc/iscsi.conf (in RHEL-4)
    and in this file you will get a line "#DiscoveryAddress=192.168.1.2" remove comment and specify your storage ip address here.
    OR
    #vim /etc/iscsi/iscsi.conf (in RHEL-5)
    and in this file you will get a line "#ins.address = 192.168.1.2" remove comment and specify your storage ip address here.
    g) #service iscsi restart (on both nodes)
    h) From both Nodes fire this command to access volume of openfiler-
    # iscsiadm -m discovery -t sendtargets -p 192.2.201.182
    i) #service iscsi restart (on both nodes)
    j) #chkconfig –level 345 iscsi on (on both nodes)
    k) make the partition 3 primary and 1 extended and within extended make 11 logical partition
    A. Prepare partitions
    1. #fdisk /dev/sdb
    :e (extended)
    Part No. 1
    First Cylinder:
    Last Cylinder:
    :p
    :n
    :l
    First Cylinder:
    Last Cylinder: +1024M
    2. Note the /dev/sdb* names.
    3. #partprobe
    4. Login as root user on node2 and run partprobe
    B. On node1 login as root user and create following raw devices
    # raw /dev/raw/raw5 /dev/sdb5
    #raw /dev/raw/taw6 /dev/sdb6
    # raw /dev/raw/raw12 /dev/sdb12
    Run ls –l /dev/sdb* and ls –l /dev/raw/raw* to confirm the above
    -Repeat the same thing on node2
    C. On node1 as root user
    # vi .etc/sysconfig/rawdevices
    /dev/raw/raw5 /dev/sdb5
    /dev/raw/raw6 /dev/sdb6
    /dev/raw/raw7 /dev/sdb7
    /dev/raw/raw8 /dev/sdb8
    /dev/raw/raw9 /dev/sdb9
    /dev/raw/raw10 /dev/sdb10
    /dev/raw/raw11 /dev/sdb11
    /dev/raw/raw12 /dev/sdb12
    /dev/raw/raw13 /dev/sdb13
    /dev/raw/raw14 /dev/sdb14
    /dev/raw/raw15 /dev/sdb15
    D. Restart the raw service (# service rawdevices restart)
    #service rawdevices restart
    Assigning devices:
    /dev/raw/raw5 --> /dev/sdb5
    /dev/raw/raw5: bound to major 8, minor 21
    /dev/raw/raw6 --> /dev/sdb6
    /dev/raw/raw6: bound to major 8, minor 22
    /dev/raw/raw7 --> /dev/sdb7
    /dev/raw/raw7: bound to major 8, minor 23
    /dev/raw/raw8 --> /dev/sdb8
    /dev/raw/raw8: bound to major 8, minor 24
    /dev/raw/raw9 --> /dev/sdb9
    /dev/raw/raw9: bound to major 8, minor 25
    /dev/raw/raw10 --> /dev/sdb10
    /dev/raw/raw10: bound to major 8, minor 26
    /dev/raw/raw11 --> /dev/sdb11
    /dev/raw/raw11: bound to major 8, minor 27
    /dev/raw/raw12 --> /dev/sdb12
    /dev/raw/raw12: bound to major 8, minor 28
    /dev/raw/raw13 --> /dev/sdb13
    /dev/raw/raw13: bound to major 8, minor 29
    /dev/raw/raw14 --> /dev/sdb14
    /dev/raw/raw14: bound to major 8, minor 30
    /dev/raw/raw15 --> /dev/sdb15
    /dev/raw/raw15: bound to major 8, minor 31
    done
    E. Repeat the same thing on node2 also
    F. To make these partitions accessible to oracle user fire these commands from both Nodes.
    # chown –R oracle:oinstall /dev/raw/raw*
    # chmod –R 755 /dev/raw/raw*
    F. To make these partitions accessible after restart make these entry on both nodes
    # vi /etc/rc.local
    Chown –R oracle:oinstall /dev/raw/raw*
    Chmod –R 755 /dev/raw/raw*
    4. SSH configuration (User quivalence)
    On node1:- $ssh-keygen –t rsa
    $ssh-keygen –t dsa
    On node2:- $ssh-keygen –t rsa
    $ssh-keygen –t dsa
    On node1:- $cd .ssh
    $cat *.pub>>node1
    On node2:- $cd .ssh
    $cat *.pub>>node2
    On node1:- $scp node1 node2:/home/oracle/.ssh
    On node2:- $scp node2 node2:/home/oracle/.ssh
    On node1:- $cat node*>>authowized_keys
    On node2:- $cat node*>>authowized_keys
    Now test the ssh configuration from both nodes
    $ vim a.sh
    ssh node1 hostname
    ssh node2 hostname
    ssh node1-priv hostname
    ssh node2-priv hostname
    $ chmod +x a.sh
    $./a.sh
    first time you'll have to give the password then it never ask for password
    5. To run cluster verifier
    On node1 :-$cd /…/stage…/cluster…/cluvfy
    $./runcluvfy stage –pre crsinst –n node1,node2
    First time it will ask for four New RPMs but remember install these rpms by double clicking because of dependancy. So better to install these rpms in this order (rpm-3, rpm-4, rpm-1, rpm-2)
    1. compat-gcc-7.3-2.96.128.i386.rpm
    2. compat-gcc-c++-7.3-2.96.128.i386.rpm
    3. compat-libstdc++-7.3-2.96.128.i386.rpm
    4. compat-libstdc++-devel-7.3-2.96.128.i386.rpm
    And again run cluvfy and check that "It should given a clean cheat" then start clusterware installation.

  • Runcluvfy.sh stage pre fails with node reachability on 1 node only

    Having a frustrating problem. 2 node RAC system on RHEL 5.2 installing 11.2.0.1 grid/clusterware. Performing the following pre check command from node 1:
    ./runcluvfy.sh stage -pre crsinst -n node1,node2 -verboseI'm getting the following error and it cannot write the trace information
    [grid@node1 grid]$ sudo chmod -R 777 /tmp
    [grid@node1 grid]$ ./runcluvfy.sh stage -pre crsinst -n node1,node2 -verbose
    WARNING:
    Could not access or create trace file path "/tmp/bootstrap/cv/log". Trace information could not be collected
    Performing pre-checks for cluster services setup
    Checking node reachability...
    node1.mydomain.com: node1.mydomain.com
    Check: Node reachability from node "null"
      Destination Node                      Reachable?
      node2                       no
      node1                       no
    Result: Node reachability check failed from node "null"
    ERROR:
    Unable to reach any of the nodes
    Verification cannot proceed
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    [grid@node1 grid]$
    [grid@node1 grid]$ echo $CV_DESTLOC
    /home/grid/software/grid/11gr2/gridI've verified the following:
    1) there is user equivalence between the nodes for user grid
    2) /tmp is read/writable by user grid on both nodes
    3) Setting the CV_DESTLOC appears to do nothing - it seems to go back to wanting to write to /tmp
    4) ./runcluvfy comp nodecon -n node1,node2-verbose succeeds no problem
    And the weirdest thing of all, when I run ./runcluvfy.sh stage -pre crsinst -n node1,node2 -verbose from node 2, it succeeds without errors.
    What am I missing? And TIA..

    I made a copy of the runcluvfy.sh and commented out all rm -rf commands so that it would at least save the trace files. Re-ran, and the following trace output - not entirely helpful to me, but any gurus out there see anything?
    [main] [ 2010-04-20 15:48:38.275 CDT ] [TaskNodeConnectivity.performTask:354]  _nw_:Performing Node Reachability verification task...
    [main] [ 2010-04-20 15:48:38.282 CDT ] [ResultSet.traceResultSet:341]
    Target ResultSet BEFORE Upload===>
            Overall Status->UNKNOWN
    [main] [ 2010-04-20 15:48:38.283 CDT ] [ResultSet.traceResultSet:341]
    Source ResultSet ===>
            Overall Status->OPERATION_FAILED
            node2-->OPERATION_FAILED
            node1-->OPERATION_FAILED
    [main] [ 2010-04-20 15:48:38.283 CDT ] [ResultSet.traceResultSet:341]
    Target ResultSet AFTER Upload===>
            Overall Status->OPERATION_FAILED
            node2-->OPERATION_FAILED
            node1-->OPERATION_FAILED
    [main] [ 2010-04-20 15:48:38.284 CDT ] [ResultSet.getSuccNodes:556]  Checking for Success nodes from the total list of nodes in the resultset
    [main] [ 2010-04-20 15:48:38.284 CDT ] [ReportUtil.printReportFooter:1553]  stageMsgID: 8302
    [main] [ 2010-04-20 15:48:38.284 CDT ] [CluvfyDriver.main:299]  ==== cluvfy exiting normally.I'm still baffled why the precheck is successful from the second node. And, in fact, all other cluvfy checks that I've run succeed form both nodes.

  • Tree creation failed on node: pcd:portal_content/...

    Hi out there,
    after patching our EP 7 from SPS 10 to SPS 13 we have the following error:
    In the portal content directory there are some folders which cannot be
    expanded anymore. The following error message appears: "Could not load
    or refresh node Tree creation failed on node: pcd:portal_content/..."
    I have found out that this is always caused by an inconsistent role
    which is located in the folder I'd like to expand (or in a subfolder
    of it).
    It seems that this error has already been occuring in earlier SPs and / or releases. Has anyone found a solution to it?!?
    Thanx for your support and best regards
    Juergen Kuechle.

    Hi
    Restart the server it solve ur problem
    The problem is caused by a missing "ADD" notification for imported folder objects. If the package contains new folder objects , the caches on other cluster nodes are not synchronized for these folders. If the package contains a complete folder hierarchy with other PCD objects (like iViews, pages, roles, ...) under a folder, and this folder object is contained in the package and imported before the objects under the folder, the complete hierarchy is not synchronized in the cluster.
    Release the PCD cache on all cluster nodes after importing an EPA file containing folder objects
    Create separate transport packages for the folder objects and import them after the transport packages containing the (regular) objects under these folders
    Check SAP NOTE 991599
    Regards
    Krishna.

  • RAC AttachHome' failed on nodes

    I am in process of configuring on VMWARE for two node real application cluster
    I have installed CLUSTERWARE installation successfully on both the nodes
    when I install Oracle software at 90% stage I am getting the below error
    AttachHome' failed on nodes: 'rac2'. Refer to '/u01/app/oraInventory/logs/installActions2011-03-17_06-57-18PM.log' for details.
    You can manually re-run the following command on the failed nodes after the installation:
    /u01/app/oracle/product/11.1.0/db_1/oui/bin/runInstaller -attachHome -noClusterEnabled ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1 ORACLE_HOME_NAME=OraDb11g_home1 CLUSTER_NODES=rac1,rac2 "INVENTORY_LOCATION=/u01/app/oraInventory" LOCAL_NODE=<node on which command is to be run>.
    INFO: User Selected: Yes/OK

    Hi,
    This post is duplicate.
    Please close this thread we will continue on this Thread RAC software installation : AttachHome' failed on nodes: 'rac2'
    Levi Pereira

  • Recovery of data after ASM Disk fails

    OS : Sun Solaris
    DB: 10.2.0.3 RAC (2 Nodes)
    Are there any steps to be followed for recovery of data after ASM Disk fails?
    We are using a 2 Node RAC with ASM normal redundancy. Say if one disk of a diskgroup fails, then what steps we need to follow to make sure that Database is aware of the new disk ?

    you said you are using NOrmal Redundancy, which is 2 way mirroring. So with that said, your data should be fine as one only disk has failed and got mirrored. So once you replace to disk, oracle should pick that up and move to data back into it....BUT NOT QUIET SURE, just an opinion.

  • No Boot Disk or Boot Disk Failed error

    I set up a Pavillion 500-c60 today but when I turned it on, I got a "No Boot Disk or Boot Disk Failed" error. Any suggestions?

    Here is a guide related to your problem. It's step by step.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • The attempt to burn a disk failed. An unknown error occurred (4000).

    Whenever I try to burn a CD from iTunes, the burning process starts and continues for about two minutes, cancels automatically and then displays the following statement: "The attempt to burn a disk failed. An unknown error occurred (4000)."
    Several Apple technicians have tried but been unable to assist me. They have pointed me to articles at http://docs.info.apple.com/article.html?artnum=93360 and http://docs.info.apple.com/article.html?artnum=93286 but none of the suggested solutions solve the problem.
    1. I have the most recent version of iTunes (6.0.1).
    2. All of the songs that I am trying to burn are authorized. For example, they include the Complete U2 Collection, which I recently downloaded from the iTunes Music Store.
    3. I am not trying to burn a CD with the same Playlist more than seven times.
    4. My CD burner works perfectly fine using other CD burning software, such as Windows Media Player or Roxio Easy Media Creator. However, these programs are not compatible with any of the many pieces of music that I have purchased and downloaded from the iTunes Music Store.
    My hardware configuration is as follows:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    HP Pavilion 061 PJ467AA-ABA M1180N
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Iviaspi (1.0.0.0), Pfc (2.5.0.204), Cdr4_xp (7.5.0.47),
    UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (7.5.0.47), pwd_2k (7.5.0.47),
    Video Driver: RADEON X300 Series\RADEON X300 Series
    Found aspi32 running.
    Does anyone have any suggestions as to how I can restore my ability to burn CDs from iTunes? Thank you very much!

    I am having the same problem. I get an error 4450 - unknown. I have purchased several songs but it appears I will not be able to burn them to CD.

  • Very sick Macbook Pro OS v 10.6.8 - initially running slow so I tried backing up to Time Machine and reloading the OS but the install disk failed. I was able to recover from the Time Machine back up but many applications are not working properly. Help!

    I am also no longer able to back up using Time Machine (backups fail), can't access iPhoto (which was a problem before attempting to reload OS) and I suspect other apps are no longer working. The computer is however running faster in Safari and Mail...any suggestions would be greatly appreciated.

    If there are any files you can transfer to  a regular storage drive do that first and then disconenct all drives.
    Hold c boot off the 10.6.8 disk and use Disk Utility to Erase with Zero option the hard drive, takes some time, let it complete as it's mapping off any bad or failing sectors.
    Then install 10.6. log in and update to 10.6.8 (important!)
    Now use Migration Assistant to transfer over just your user files, we need to rescue those first out of TimeMachine's EVIL clutches, once you've got that, transfer them to the regular storage drive and disconnect.
    Note: if your 10.6 disk fails, call Apple for a replacement, you need the machine specific version, the 10.6.3 retial doesn't have iLife and only works for machines pre 10.6.3 release, not afterwards. Factory installed 10.6.4 machines and afterwards need machine specific disks.
    Then either:
    Log into the admin/first set up user on the machine and delete the Migrated user, then reboot and use Migration assistant again to TM everything this time
    Or
    Just install all your programs again from fresh sources.
    If your TM drive is really hosed, then you'll need Data Rescue $99 to read the TM files directly and transfer the results to another regular storage drive (not the first one just in case), then pick through the debris and locate your files and transfer them to another drive.
    I don't like TimeMachine, but for newbies it's better than nothing.
    (I prefer cloning my entire OS X parititon instead, I can access it from any computer (Linux, Mac or PC) and I also can boot my Mac from it. I use Carbon Copy Cloner, but that's for later once your all better. )

  • Attempting to copy to the disk failed. An unknown error occurrred (-51).

    I apologize if this issue has been addressed before, but I’m pretty well at the end of my rope here. As mentioned in the title, the message is:
    “Attempting to copy to the disk failed. An unknown error occurred (-51)”
    I have tried resetting my 20G iPod, as well as re-downloading and running the iTunes and iPod installer. If I delete something off of my iPod, unplug it, and then plug it back in again, the song name is there again, but this time it has an exclamation point next to it and it won’t play the song. It plays the rest of the music fine through the computer and through my stereo (I was having some problems with it skipping to the next song in the middle of a song, but I reset it and haven’t had the problem since). I don’t want to have to restore the iPod for the simple fact that I didn’t take the time to backup all my music. That would be a pain. Also, something else I’ve noticed is that I can actually hear its hard drive now kicking in and out when it’s really quiet and plugged into the computer. I hope that I just never noticed that before.
    Without having to restore, is there anything else that I haven’t tried? HELP!!
    15" Powerbook G4   Mac OS X (10.3.9)  

    Welcome to Apple Discussions!
    See if either of these help (even though they apply for different error numbers/messages)...
    http://docs.info.apple.com/article.html?artnum=302684
    http://docs.info.apple.com/article.html?artnum=301267
    Also, make sure everything is up to date...
    iTunes
    iPod Updater
    Updating iPod's Software
    If none of that works, you may need to restore...
    Restore the iPod
    But you can try to recover your music first...
    MacMuse: Computer Crashed
    btabz

  • Why do I keep receiving the error message: disk failed image corrupt

    I am trying to upgrade my version of Firefox from 2.0.0.2 (downloaded Nov. 2007) to the new version 3.6.12. on my IMac desktop computer.
    When I download the file I receive a white and grey icon that says Firefox 3.6.12.dmg. When I click on this icon I receive the error message:
    mounting disk failed; image corrupt.

    Firefox 3.0 and 3.5/6 versions require at least Mac OS X 10.4
    *http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
    Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3
    See:
    * http://kb.mozillazine.org/Installing_Firefox
    * http://kb.mozillazine.org/Unsupported_operating_systems
    Mac: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
    If you have Mac OS X 10.4 or newer then do this:
    * Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    * Trash the current Firefox application to do a clean (re)install.
    * Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.
    Other things that need attention.<br>
    Your above posted system details show two old Flash 9 plugins that you should remove and update to the latest Flash 9 version.
    text
    # Shockwave Flash 9.0 r47
    # Shockwave Flash 9.0 r16
    Flash Player 9: http://www.adobe.com/go/kb406791 (Flash Player 9 for Unsupported Operating Systems)

  • Attempting to copy to disk failed.

    I was using my iPod in cold weather the other night. The battery died and when it warmed back up the screen was in grayscale and it was in "disk mode". I have since restored it several times and am trying to sync it with iTunes. I keep getting an error message "Attempting to copy to disk failed. You do not have enough access privileges for this operation". The iPod was syncing just fine prior to the cold crash. I tried changing the permissions in my iTunes music library and xml file. Help?

    First, reset the iPod
    http://support.apple.com/kb/HT1320
    and restart the Mac with the iPod connected; then try it again.
    If that does not help, connect the iPod to the Mac. With iTunes not running, run Disk Utility. Does the iPod's hard drive appear in the Disk Utility sidebar? If so, select the iPod's DRIVE, not the volume indented under the drive, in the sidebar and go to the Erase tab. Set the format type to +Mac OS Extended (Journaled)+ and erase the iPod's drive.
    If the erase completes successfully, quit Disk Utility and run iTunes. Immediately use the Restore button to install and initialize the iPod's software. You can then set it up and sync it as desired.

  • Attempting to copy to the disk failed. An unknown error occured (-69)

    i bought a whole bunch of stuff on itunes, then when i went to sync my ipod it asked if i wanted to update to the new software, i said yes and updated, then while it was syncing it says attempting to copy to the disk failed, an unknown error. it wont put any of the new video or music i bought on my ipod. its an 80 gig, ipod classic.

    Have you had a look at this troubleshooting page? It may be of some help: iTunes displays a -69 error when syncing iPod

  • When synching my IPhone 3Gs I now get a sign "Attempting to copy to Disk failed. The required disk cannot be found." This is after synching a new Iphone 4s.. Help!!

    When attempting to synch my IPhone 3Gs I now get a sign "Attempting to copy to Disk failed. The required disk cannot be found."
    This is after synching a new Iphone 4s and having received some help from Apple Support who assisted with some setting
    changes. Unfortunately this was over a protracted period of time and I cannot recall what was changed. Apparently my 3Gs is out of
    its warranty and so they cannot help me unless I pay £25....
    Can anyone help??
    Johnm2429

    Well, attempted again today and now my iTunes locks up whenever I select a song! Also, my Volume Mixer on my Windows 7 will not open. Just terrific. Where's my MacBook???????????????

Maybe you are looking for

  • [nQSError: 46036] Internal Assertion: Condition internalParams.size() 0,

    Hello all, I have looked everywhere but this one is not to be googled. I am running on my local machine for testing in a checked out rpd, Connected across connection pools to two different databases on two different servers on two different continent

  • Shooting black and white images

    Hullo all, I have been a long time user of Aperture and find it wonderful! I shoot with Nikon gear, mainly with a D7000 and a D5100. I find both magnificent! Love a D800, but not right now! Now to my question. I have restricted my shooting to colour,

  • I have received an email for an iPhone repair I haven't had done, what should I do?

    I received an email to my iCloud account this morning saying that my iphone had been repaired in a shop in anchorage, I live in England. There is obviously something wrong but I cannot find anywhere on the apple website where I can forward this to sa

  • Connecting to the Google Mail application on a Nok...

    I've downloaded the Google Mail app but can't get it to connect to the network on my phone - after entering my user name and password I just get a message which says no network access. My phone is set up for WAP web browsing and this works fine. I'd

  • Dropdowns over Flash

    I'm trying to develop a dropdown navigation but it won't show properly over Flash, it'll work in Safari but not Firefox, and especially on a PC ie6+7 http://www.pollenbrooks.com/en/indextest.html Are there any workarounds?