Cluster Error SAP ECC EHP5 using DB2

Hi, I´m installing SAP ECC EHP5 over Windows Server 2008 R2 in MSCS using DB2 as Database.
I follow the steps in the installation guide and the first node was sucessfully installed. My problem is that when I execute the second step of the installation (database installation), in the sub-step "Now cluster the database" , after installed the database in the second node and run the utility db2mscs the following error occurs when I tried to initialize the DB2 service:
"An error occurred while attemping to bring the resource ''DB2 Server' online"
Error code: 0x8007138f
The cluster resource could not be found
Could you please give any hint to continue the installation?
Thanks a lot.
Kind regards

I made a mistake and opened the thread 2 times. The other one was answered.
Cluster Error SAP ECC EHP5 using DB2
Edited by: Esteban REyes on Oct 18, 2011 10:32 AM

Similar Messages

  • XSD and XML to integrate sap ecc system using PI 7.3

    Hi ,
    Please tell me
    1.how to integrate using PI 7.3 XML and XSD to sap ecc to post cost centre idocs .
    2.how to post standard cost centre idocs using PI 7.3 to third party system ,please througn some light on these scenarios

    >.how to post standard cost centre idocs using PI 7.3 to third party system ,please througn some light on these scenarios
    You first need to talk to third party system about their tecnologies handling.  If the sender system ecc sends idoc to PI then PI can convert the idoc to xml file or idoc to webservice or so.
    Example idoc to file is one possible option.

  • STMS error in ECC 6.0 - DB2 /AIX

    Hello Dirk,
    This is log file of R3trans -d :
    gipapp:prdadm 6> R3trans -d
    This is R3trans version 6.14 (release 700 - 20.07.06 - 17:34:00).
    unicode enabled version
    2EETW169 no connect possible: "DBMS = DB6 --- DB2DB
    DFT = 'PRD'"
    R3trans finished (0012).
    gipapp:prdadm 7> cat trans.log
    4 ETW000 R3trans version 6.14 (release 700 - 20.07.06 - 17:34:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time : 14.02.2007 - 07:35:24
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000 trace at level 2 opened for a given file pointer
    4 ETW000 [dev trc ,00000] Wed Feb 14 07:35:24 2007
    55 0.000055
    4 ETW000 [dev trc ,00000] db_con_init called
    20 0.000075
    4 ETW000 [dev trc ,00000] create_con (con_name=R/3)
    35 0.000110
    4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PRD/SYS/exe/run/dbd
    b6slib.o' ...
    4 ETW000
    48 0.000158
    4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PRD/SYS/exe/run/db
    db6slib.o), hdl 0
    4 ETW000
    529 0.000687
    4 ETW000 [dev trc ,00000] Library '/usr/sap/PRD/SYS/exe/run/dbdb6slib.o' l
    oaded
    4 ETW000
    29 0.000716
    4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sa
    p/PRD/SYS/exe/run/dbdb6slib.o
    4 ETW000
    31 0.000747
    4 ETW000 [dev trc ,00000] Version of '/usr/sap/PRD/SYS/exe/run/dbdb6slib.o
    ' is "700.08", patchlevel (0.52)
    4 ETW000
    141 0.000888
    4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/s
    ap/PRD/SYS/exe/run/dbdb6slib.o
    4 ETW000
    31 0.000919
    4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/
    sap/PRD/SYS/exe/run/dbdb6slib.o
    4 ETW000
    30 0.000949
    4 ETW000 [dev trc ,00000] New connection 0 created
    24 0.000973
    4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCO
    NNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, oc
    c = NO
    4 ETW000
    35 0.001008
    4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3)
    33 0.001041
    4 ETW000 [dev trc ,00000] find_con_by_name found the following connection
    for reuse:
    4 ETW000
    29 0.001070
    4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCON
    NECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ
    = NO
    4 ETW000
    33 0.001103
    4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08
    [opt]
    4 ETW000
    311 0.001414
    4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels
    19 0.001433
    4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (n
    ote 150037)
    4 ETW000
    30 0.001463
    4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616)
    20 0.001483
    4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note
    835135)
    4 ETW000
    29 0.001512
    4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 83318
    3)
    4 ETW000
    29 0.001541
    4 ETW000 [dev trc ,00000] (0.10) DB6: link dbdb6slib.dll on windows with
    libdb6.obj (note 761159)
    4 ETW000
    30 0.001571
    4 ETW000 [dev trc ,00000] (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (
    note 851474)
    4 ETW000
    37 0.001608
    4 ETW000 [dev trc ,00000] (0.15) DB6: wrong CAST for short string ABAP t
    ype (note 861905)
    4 ETW000
    30 0.001638
    4 ETW000 [dev trc ,00000] (0.17) DB6: special characters in sidadm passw
    d (note 865839)
    4 ETW000
    29 0.001667
    4 ETW000 [dev trc ,00000] (0.21) DB6: no SAP_INFO comments (note 873889)
    4 ETW000
    29 0.001696
    4 ETW000 [dev trc ,00000] (0.22) DB6: hints: get correlation names from
    view texts (note 868888)
    4 ETW000
    30 0.001726
    4 ETW000 [dev trc ,00000] (0.23) DB6: hints: get correlation names from
    view texts (note 868888)
    4 ETW000
    29 0.001755
    4 ETW000 [dev trc ,00000] (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_RE
    F (note 883402)
    4 ETW000
    29 0.001784
    4 ETW000 [dev trc ,00000] (0.27) DB6: activate value compression (note 8
    86231)
    4 ETW000
    30 0.001814
    4 ETW000 [dev trc ,00000] (0.28) DB6: optimization guidelines on views p
    art 2 (note 868888)
    4 ETW000
    29 0.001843
    4 ETW000 [dev trc ,00000] (0.30) DB6: no SQL trace for SQLCancel (note 8
    92111)
    4 ETW000
    29 0.001872
    4 ETW000 [dev trc ,00000] (0.33) DB6: append SAP_TA comment (note 873889
    4 ETW000
    29 0.001901
    4 ETW000 [dev trc ,00000] (0.34) DB6: activate value compression with qu
    oted names (note 886231)
    4 ETW000
    30 0.001931
    4 ETW000 [dev trc ,00000] (0.36) DB6: Repeat isolated DDL statements aft
    er SQL0911 (note 901338)
    4 ETW000
    29 0.001960
    4 ETW000 [dev trc ,00000] (0.41) DB6: add V9 to list of supported DB2 re
    leases (note 912386)
    4 ETW000
    30 0.001990
    4 ETW000 [dev trc ,00000] (0.50) DB6: reread passwords for secondary con
    nections (note 931742)
    4 ETW000
    29 0.002019
    4 ETW000 [dev trc ,00000] (0.52) DB6: double quote table names in optgui
    delines (note 868888)
    4 ETW000
    30 0.002049
    4 ETW000 [dev trc ,00000] Supported features:
    18 0.002067
    4 ETW000 [dev trc ,00000] - CLI LOAD for INSERT ... FULLSELECT
    19 0.002086
    4 ETW000 [dev trc ,00000] ..retrieving configuration parameters
    18 0.002104
    4 ETW000 [dev trc ,00000] ..done
    91 0.002195
    4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode
    18 0.002213
    4 ETW000 [dev trc ,00000] DB2 library /db2/db2prd/sqllib/lib64/libdb2.a(sh
    r_64.o) successfully loaded
    4 ETW000
    9497 0.011710
    4 ETW000 [dev trc ,00000] Wed Feb 14 07:35:26 2007
    1490336 1.502046
    4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1379] (BEGIN)
    27 1.502073
    4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI D
    river] SQL1040N The maximum number of applications is already connected
    4 ETW000
    43 1.502116
    4 ETW000 [dev trc ,00000] &+ to the database. SQLSTATE=57030
    4 ETW000
    32 1.502148
    4 ETW000 [dev trc ,00000] &+
    4 ETW000
    32 1.502180
    4 ETW000 [dev trc ,00000] &+
    4 ETW000
    32 1.502212
    4 ETW000 [dev trc ,00000] &+
    4 ETW000
    31 1.502243
    4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1379] (END)
    20 1.502263
    4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'PRD' as 'sapprd' fa
    iled
    4 ETW000
    54 1.502317
    2EETW169 no connect possible: "DBMS = DB6 --- DB2DB
    DFT = 'PRD'"
    gipapp:prdadm 8>
    gipapp:prdadm 8> disp+work -V|more
    disp+work information
    kernel release 700
    kernel make variant 700_REL
    DBMS client library DB6_81
    DBSL shared library version 700.08
    compiled on AIX 2 5 005DD9CD4C00
    compiled for 64 BIT
    compilation mode UNICODE
    compile time Apr 2 2006 20:44:50
    update level 0
    patch number 52
    Standard input
    Please help me ASAP
    Dabinder Singh  
    Posts: 19
    Questions: 2
    Registered: 12/14/06
    Forum points: 0 
       Re: ECC 6.0 installation error - DB2/ AIX  
    Posted: Feb 14, 2007 2:47 PM    in response to: dirk pohl         Reply      E-mail this post 
    I am getting this error while executing this db2 connect to prd user db2prd
    gipdb:prdadm 1> db2 connect to prd
    SQL30082N Attempt to establish connection failed with security reason "3"
    ("PASSWORD MISSING"). SQLSTATE=08001
    gipdb:prdadm 2> db2 connect to prd user db2prd
    Enter current password for db2prd:
    SQL1040N The maximum number of applications is already connected to the
    database. SQLSTATE=57030
    Regards,
    Gautam.

    Hello,
    Now DB and CI is running in Node A and Dialog Instance is running in Node B. There is no list" db2 list applications " in Node B .
    In Node A :  db2 list applications :
    gipdb:prdadm 2> db2 list applications
    Auth Id  Application    Appl.      Application Id                 DB       # of
             Name           Handle                                    Name    Agent
    SAPPRD   disp+work      40         C0A8D52B.O042.0A0574152020     PRD      1
    SAPPRD   disp+work      39         C0A8D52B.O041.020CF4152020     PRD      1
    SAPPRD   disp+work      38         C0A8D52B.O040.0C0E94152020     PRD      1
    SAPPRD   disp+work      37         C0A8D52B.O03F.000574152019     PRD      1
    SAPPRD   disp+work      36         C0A8D52B.O03E.020314152019     PRD      1
    SAPPRD   disp+work      35         C0A8D52B.O03D.0301B4152019     PRD      1
    SAPPRD   disp+work      34         C0A8D52B.O03C.040234152019     PRD      1
    SAPPRD   disp+work      33         C0A8D52B.O03B.090D34152018     PRD      1
    SAPPRD   disp+work      32         C0A8D52B.O03A.070974152018     PRD      1
    SAPPRD   disp+work      31         C0A8D52B.O039.0F0D14152018     PRD      1
    SAPPRD   disp+work      30         C0A8D52B.O038.050DB4152018     PRD      1
    SAPPRD   disp+work      29         C0A8D52B.O037.0B02D4152018     PRD      1
    SAPPRD   disp+work      28         C0A8D52B.O036.050794152018     PRD      1
    SAPPRD   disp+work      27         C0A8D52B.O035.040C14152018     PRD      1
    SAPPRD   disp+work      26         C0A8D52B.O034.0D0D94152014     PRD      1
    SAPPRD   disp+work      25         C0A8D52B.O032.070034152012     PRD      1
    SAPPRD   disp+work      24         C0A8D52B.O030.0E0AD4152011     PRD      1
    SAPPRD   disp+work      23         C0A8D52B.O02F.0B0614152009     PRD      1
    SAPPRD   disp+work      22         C0A8D52B.O02E.0A0C54152007     PRD      1
    SAPPRD   disp+work      21         C0A8D52B.O02D.080534152007     PRD      1
    SAPPRD   disp+work      16         C0A8D52B.O028.0407F4152007     PRD      1
    SAPPRD   disp+work      20         C0A8D52B.O02C.090974152007     PRD      1
    SAPPRD   disp+work      15         C0A8D52B.O027.090554152007     PRD      1
    SAPPRD   disp+work      14         C0A8D52B.O026.000C34152007     PRD      1
    SAPPRD   disp+work      19         C0A8D52B.O02B.050514152007     PRD      1
    SAPPRD   disp+work      18         C0A8D52B.O02A.0A0774152007     PRD      1
    SAPPRD   disp+work      17         C0A8D52B.O029.080814152007     PRD      1
    SAPPRD   disp+work      13         C0A8D52B.O025.080DB4152007     PRD      1
    SAPPRD   disp+work      12         C0A8D52B.O024.0B0D34152007     PRD      1
    In Node A : db2 get dbm cfg :
    gipdb:prdadm 3> db2 get dbm cfg
              Database Manager Configuration
         Node type = Enterprise Server Edition with local and remote clients
    Database manager configuration release level            = 0x0a00
    CPU speed (millisec/instruction)             (CPUSPEED) = 3.581945e-07
    Communications bandwidth (MB/sec)      (COMM_BANDWIDTH) = 1.000000e+02
    Max number of concurrently active databases     (NUMDB) = 8
    Data Links support                          (DATALINKS) = NO
    Federated Database System Support           (FEDERATED) = NO
    Transaction processor monitor name        (TP_MON_NAME) =
    Default charge-back account           (DFT_ACCOUNT_STR) =
    Java Development Kit installation path       (JDK_PATH) = /usr/java14_64
    Diagnostic error capture level              (DIAGLEVEL) = 3
    Notify Level                              (NOTIFYLEVEL) = 3
    Diagnostic data directory path               (DIAGPATH) = /db2/PRD/db2dump
    Default database monitor switches
       Buffer pool                         (DFT_MON_BUFPOOL) = ON
       Lock                                   (DFT_MON_LOCK) = ON
       Sort                                   (DFT_MON_SORT) = ON
       Statement                              (DFT_MON_STMT) = ON
       Table                                 (DFT_MON_TABLE) = ON
       Timestamp                         (DFT_MON_TIMESTAMP) = ON
       Unit of work                            (DFT_MON_UOW) = ON
    Monitor health of instance and databases   (HEALTH_MON) = OFF
    SYSADM group name                        (SYSADM_GROUP) = DBPRDADM
    SYSCTRL group name                      (SYSCTRL_GROUP) = DBPRDCTL
    SYSMAINT group name                    (SYSMAINT_GROUP) = DBPRDMNT
    SYSMON group name                        (SYSMON_GROUP) =
    Client Userid-Password Plugin          (CLNT_PW_PLUGIN) =
    Client Kerberos Plugin                (CLNT_KRB_PLUGIN) =
    Group Plugin                             (GROUP_PLUGIN) =
    GSS Plugin for Local Authorization    (LOCAL_GSSPLUGIN) =
    Server Plugin Mode                    (SRV_PLUGIN_MODE) = UNFENCED
    Server List of GSS Plugins      (SRVCON_GSSPLUGIN_LIST) =
    Server Userid-Password Plugin        (SRVCON_PW_PLUGIN) =
    Server Connection Authentication          (SRVCON_AUTH) = NOT_SPECIFIED
    Database manager authentication        (AUTHENTICATION) = SERVER_ENCRYPT
    Cataloging allowed without authority   (CATALOG_NOAUTH) = NO
    Trust all clients                      (TRUST_ALLCLNTS) = YES
    Trusted client authentication          (TRUST_CLNTAUTH) = CLIENT
    Bypass federated authentication            (FED_NOAUTH) = NO
    Default database path                       (DFTDBPATH) = /db2/PRD
    Database monitor heap size (4KB)          (MON_HEAP_SZ) = 128
    Java Virtual Machine heap size (4KB)     (JAVA_HEAP_SZ) = 2048
    Audit buffer size (4KB)                  (AUDIT_BUF_SZ) = 0
    Size of instance shared memory (4KB)  (INSTANCE_MEMORY) = AUTOMATIC
    Backup buffer default size (4KB)            (BACKBUFSZ) = 1024
    Restore buffer default size (4KB)           (RESTBUFSZ) = 1024
    Sort heap threshold (4KB)                  (SHEAPTHRES) = 20000
    Directory cache support                     (DIR_CACHE) = NO
    Application support layer heap size (4KB)   (ASLHEAPSZ) = 16
    Max requester I/O block size (bytes)         (RQRIOBLK) = 65000
    Query heap size (4KB)                   (QUERY_HEAP_SZ) = 2000
    Workload impact by throttled utilities(UTIL_IMPACT_LIM) = 10
    Priority of agents                           (AGENTPRI) = SYSTEM
    Max number of existing agents               (MAXAGENTS) = 1024
    Agent pool size                        (NUM_POOLAGENTS) = 10
    Initial number of agents in pool       (NUM_INITAGENTS) = 5
    Max number of coordinating agents     (MAX_COORDAGENTS) = (MAXAGENTS - NUM_INIT
    AGENTS)
    Max no. of concurrent coordinating agents  (MAXCAGENTS) = MAX_COORDAGENTS
    Max number of client connections      (MAX_CONNECTIONS) = MAX_COORDAGENTS
    Keep fenced process                        (KEEPFENCED) = YES
    Number of pooled fenced processes         (FENCED_POOL) = MAX_COORDAGENTS
    Initial number of fenced processes     (NUM_INITFENCED) = 0
    Index re-creation time and redo index build  (INDEXREC) = RESTART
    Transaction manager database name         (TM_DATABASE) = 1ST_CONN
    Transaction resync interval (sec)     (RESYNC_INTERVAL) = 180
    SPM name                                     (SPM_NAME) =
    SPM log size                          (SPM_LOG_FILE_SZ) = 256
    SPM resync agent limit                 (SPM_MAX_RESYNC) = 20
    SPM log path                             (SPM_LOG_PATH) =
    TCP/IP Service name                          (SVCENAME) = sapdb2PRD
    Discovery mode                               (DISCOVER) = SEARCH
    Discover server instance                (DISCOVER_INST) = ENABLE
    Maximum query degree of parallelism   (MAX_QUERYDEGREE) = 1
    Enable intra-partition parallelism     (INTRA_PARALLEL) = NO
    No. of int. communication buffers(4KB)(FCM_NUM_BUFFERS) = 4096
    Number of FCM request blocks              (FCM_NUM_RQB) = AUTOMATIC
    Number of FCM connection entries      (FCM_NUM_CONNECT) = AUTOMATIC
    Number of FCM message anchors         (FCM_NUM_ANCHORS) = AUTOMATIC
    Node connection elapse time (sec)         (CONN_ELAPSE) = 10
    Max number of node connection retries (MAX_CONNRETRIES) = 5
    Max time difference between nodes (min) (MAX_TIME_DIFF) = 60
    db2start/db2stop timeout (min)        (START_STOP_TIME) = 10
    gipdb:prdadm 4>
    For Node B : db2 get dbm cfg
    /dev/hd3          2097152   1918984    9%      207     1% /tmp
    /dev/fwdump        262144    261776    1%        4     1% /var/adm/ras/platform
    /dev/hd1          1048576    851168   19%      170     1% /home
    /proc                   -         -    -         -     -  /proc
    /dev/hd10opt       262144    159828   40%     3067     8% /opt
    /dev/fslv00       4194304   3354388   21%      269     1% /fixes
    /dev/sapinstdir    41943040  22572388   47%    24562     1% /sapinstdir
    /dev/db2          5242880   5220288    1%      222     1% /db2
    df -k
    Filesystem    1024-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4          1048576   1013496    4%     2396     2% /
    /dev/hd2         10485760   8399540   20%    49837     3% /usr
    /dev/hd9var       2097152   2038144    3%      867     1% /var
    /dev/hd3          2097152   1918984    9%      208     1% /tmp
    /dev/fwdump        262144    261776    1%        4     1% /var/adm/ras/platform
    /dev/hd1          1048576    851168   19%      170     1% /home
    /proc                   -         -    -         -     -  /proc
    /dev/hd10opt       262144    159828   40%     3067     8% /opt
    /dev/fslv00       4194304   3354388   21%      269     1% /fixes
    /dev/sapinstdir    41943040  22572388   47%    24562     1% /sapinstdir
    /dev/db2          5242880   5220288    1%      222     1% /db2
    ifconfig -a
    en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT
    ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
            inet 192.168.0.11 netmask 0xffffff00 broadcast 192.168.0.255
            inet 192.168.213.42 netmask 0xffffff00 broadcast 192.168.213.255
             tcp_sendspace 131072 tcp_recvspace 65536
    en2: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT
    ,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
            inet 192.167.0.11 netmask 0xffffff00 broadcast 192.167.0.255
            inet 192.168.213.44 netmask 0xffffff00 broadcast 192.168.213.255
             tcp_sendspace 131072 tcp_recvspace 65536
    lo0: flags=e08084b<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT
    >
            inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
            inet6 ::1/0
             tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
    df -k
    Filesystem    1024-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4          1048576   1013492    4%     2396     2% /
    /dev/hd2         10485760   8399540   20%    49837     3% /usr
    /dev/hd9var       2097152   2038124    3%      867     1% /var
    /dev/hd3          2097152   1918984    9%      207     1% /tmp
    /dev/fwdump        262144    261776    1%        4     1% /var/adm/ras/platform
    /dev/hd1          1048576    851164   19%      170     1% /home
    /proc                   -         -    -         -     -  /proc
    /dev/hd10opt       262144    159828   40%     3067     8% /opt
    /dev/fslv00       4194304   3354388   21%      269     1% /fixes
    /dev/sapinstdir    41943040  22572388   47%    24562     1% /sapinstdir
    /dev/db2          5242880   5220288    1%      222     1% /db2
    df -k
    Filesystem    1024-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4          1048576   1013492    4%     2396     2% /
    /dev/hd2         10485760   8399540   20%    49837     3% /usr
    /dev/hd9var       2097152   2038112    3%      867     1% /var
    /dev/hd3          2097152   1918952    9%      207     1% /tmp
    /dev/fwdump        262144    261776    1%        4     1% /var/adm/ras/platform
    /dev/hd1          1048576    851160   19%      170     1% /home
    /proc                   -         -    -         -     -  /proc
    /dev/hd10opt       262144    159828   40%     3067     8% /opt
    /dev/fslv00       4194304   3354388   21%      269     1% /fixes
    /dev/sapinstdir    41943040  22572388   47%    24562     1% /sapinstdir
    /dev/db2          5242880   5220288    1%      222     1% /db2
    df -k
    Filesystem    1024-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4          1048576   1013488    4%     2397     2% /
    /dev/hd2         10485760   8399540   20%    49837     3% /usr
    /dev/hd9var       2097152   2037824    3%      867     1% /var
    /dev/hd3          2097152   1918864    9%      206     1% /tmp
    /dev/fwdump        262144    261776    1%        4     1% /var/adm/ras/platform
    /dev/hd1          1048576    851132   19%      170     1% /home
    /proc                   -         -    -         -     -  /proc
    /dev/hd10opt       262144    159828   40%     3067     8% /opt
    /dev/fslv00       4194304   3354388   21%      269     1% /fixes
    /dev/sapinstdir    41943040  22572388   47%    24562     1% /sapinstdir
    /dev/db2          5242880   5220288    1%      222     1% /db2
    gipdb:/export/sapmnt/PRD     5242880   4522896   14%      811     1% /sapmnt/PRD
    gipdb:/export/sapPRD/PRD     5242880   3791848   28%     2256     1% /usr/sap/PR
    D
    gipdb:/export/saptrans/trans    20971520  16987600   19%      655     1% /usr/sa
    p/trans
    su - prdadm
    gipapp:prdadm 1> gipdb:prdadm 2> db2 list applications
    Auth Id  Application    Appl.      Application Id               gipdb:prdadm: Co
    mmand not found.
      DB     gipapp:prdadm 2>   # ogipapp:prdadm 2> f
        Auth: Command not found.
    gipapp:prdadm 3>      Name           Handle                                    N
    ame    Agent
    -Name: Command not found.
    gipapp:prdadm 4> -
    SAPPRD----
    : Command not found.
      gipapp:prdadm 5>  disp+work      40         C0A8D52B.O042.0A0574152020     PRD
          1
    SAPPRSAPPRD: Command not found.
    gipapp:prdadm 6> D   disp+work      39         C0A8D52B.O041.020CF4152020     PR
    D      1
    SAPPRD SAPPRD: Command not found.
    gipapp:prdadm 7>   disp+work      38         C0A8D52B.O040.0C0E94152020     PRD
         1
    SAPPRD   SAPPRD: Command not found.
    gipapp:prdadm 8> disp+work      37         C0A8D52B.O03F.000574152019     PRD
       1
    SAPPRDSAPPRD: Command not found.
       disgipapp:prdadm 9> p+work      36         C0A8D52B.O03E.020314152019     PRD
          1
    SAPPRD   SAPPRD: Command not found.
    gipapp:prdadm 10> disp+work      35         C0A8D52B.O03D.0301B4152019     PRD
        1
    SAPPRD   diSAPPRD: Command not found.
    gipapp:prdadm 11> sp+work      34         C0A8D52B.O03C.040234152019     PRD
      1
    SAPPRD  SAPPRD: Command not found.
    gipapp:prdadm 12>  disp+work      33         C0A8D52B.O03B.090D34152018     PRD
         1
    SAPPRSAPPRD: Command not found.
    D   dgipapp:prdadm 13> isp+work      32         C0A8D52B.O03A.070974152018     P
    RD      1
    SAPSAPPRD: Command not found.
    gipapp:prdadm 14> PRD   disp+work      31         C0A8D52B.O039.0F0D14152018
    PRD      1
    SAPPSAPPRD: Command not found.
    gipapp:prdadm 15> RD   disp+work      30         C0A8D52B.O038.050DB4152018
    PRD      1
    SAPPRSAPPRD: Command not found.
    gipapp:prdadm 16> D   disp+work      29         C0A8D52B.O037.0B02D4152018     P
    RD      1
    SAPPRSAPPRD: Command not found.
    Dgipapp:prdadm 17>    disp+work      28         C0A8D52B.O036.050794152018     P
    RD      1
    SAPPRSAPPRD: Command not found.
    gipapp:prdadm 18> D   disp+work      27         C0A8D52B.O035.040C14152018     P
    RD      1
    SAPPRDSAPPRD: Command not found.
    gipapp:prdadm 19>    disp+work      26         C0A8D52B.O034.0D0D94152014     PR
    D      1
    SAPPRD SAPPRD: Command not found.
    gipapp:prdadm 20>   disp+work      25         C0A8D52B.O032.070034152012     PRD
          1
    SAPPRSAPPRD: Command not found.
    gipapp:prdadm 21> D   disp+work      24         C0A8D52B.O030.0E0AD4152011     P
    RD      1
    SAPSAPPRD: Command not found.
    gipapp:prdadm 22> PRD   disp+work      23         C0A8D52B.O02F.0B0614152009
    PRD      1
    SAPSAPPRD: Command not found.
    gipapp:prdadm 23> PRD   disp+work      22         C0A8D52B.O02E.0A0C54152007
    PRD      1
    SAPPSAPPRD: Command not found.
    gipapp:prdadm 24> RD   disp+work      21         C0A8D52B.O02D.080534152007
    PRD      1
    SASAPPRD: Command not found.
    gipapp:prdadm 25> PPRD   disp+work      16         C0A8D52B.O028.0407F4152007
      PRD      1
    SAPPSAPPRD: Command not found.
    gipapp:prdadm 26> RD   disp+work      20         C0A8D52B.O02C.090974152007
    PRD      1
    SASAPPRD: Command not found.
    gipapp:prdadm 27> PPRD   disp+work      15         C0A8D52B.O027.090554152007
      PRD      1
    SSAPPRD: Command not found.
    gipapp:prdadm 28> APPRD   disp+work      14         C0A8D52B.O026.000C34152007
       PRD      1
    SASAPPRD: Command not found.
    gipapp:prdadm 29> PPRD   disp+work      19         C0A8D52B.O02B.050514152007
      PRD      1
    SAPPSAPPRD: Command not found.
    gipapp:prdadm 30> RD   disp+work      18         C0A8D52B.O02A.0A0774152007
    PRD      1
    SASAPPRD: Command not found.
    gipapp:prdadm 31> PPRD   disp+work      17         C0A8D52B.O029.080814152007
      PRD      1
    SAPPSAPPRD: Command not found.
    gipapp:prdadm 32> RD   disp+work      13         C0A8D52B.O025.080DB4152007
    PRD      1
    SASAPPRD: Command not found.
    gipapp:prdadm 33> PPRD   disp+work      12         C0A8D52B.O024.0B0D34152007
      PRD      1
    SAPPRD: Command not found.
    gipapp:prdadm 34> db2 list applications
    SQL1032N  No start database manager command was issued.  SQLSTATE=57019
    gipapp:prdadm 35> startsap D01
    Checking db Database
    gipapp:prdadm 38> db2 get dbm cfg
              Database Manager Configuration
         Node type = Enterprise Server Edition with local and remote clients
    Database manager configuration release level            = 0x0a00
    CPU speed (millisec/instruction)             (CPUSPEED) = 4.000000e-05
    Communications bandwidth (MB/sec)      (COMM_BANDWIDTH) = 1.250000e+00
    Max number of concurrently active databases     (NUMDB) = 8
    Data Links support                          (DATALINKS) = NO
    Federated Database System Support           (FEDERATED) = NO
    Transaction processor monitor name        (TP_MON_NAME) =
    Default charge-back account           (DFT_ACCOUNT_STR) =
    Java Development Kit installation path       (JDK_PATH) = /usr/java14_64
    Diagnostic error capture level              (DIAGLEVEL) = 3
    Notify Level                              (NOTIFYLEVEL) = 3
    Diagnostic data directory path               (DIAGPATH) = /db2/PRD/db2dump
    Default database monitor switches
       Buffer pool                         (DFT_MON_BUFPOOL) = OFF
       Lock                                   (DFT_MON_LOCK) = OFF
       Sort                                   (DFT_MON_SORT) = OFF
       Statement                              (DFT_MON_STMT) = OFF
       Table                                 (DFT_MON_TABLE) = OFF
       Timestamp                         (DFT_MON_TIMESTAMP) = ON
       Unit of work                            (DFT_MON_UOW) = OFF
    Monitor health of instance and databases   (HEALTH_MON) = ON
    SYSADM group name                        (SYSADM_GROUP) = DBPRDADM
    SYSCTRL group name                      (SYSCTRL_GROUP) = DBPRDCTL
    SYSMAINT group name                    (SYSMAINT_GROUP) = DBPRDMNT
    SYSMON group name                        (SYSMON_GROUP) =
    Client Userid-Password Plugin          (CLNT_PW_PLUGIN) =
    Client Kerberos Plugin                (CLNT_KRB_PLUGIN) =
    Group Plugin                             (GROUP_PLUGIN) =
    GSS Plugin for Local Authorization    (LOCAL_GSSPLUGIN) =
    Server Plugin Mode                    (SRV_PLUGIN_MODE) = UNFENCED
    Server List of GSS Plugins      (SRVCON_GSSPLUGIN_LIST) =
    Server Userid-Password Plugin        (SRVCON_PW_PLUGIN) =
    Server Connection Authentication          (SRVCON_AUTH) = NOT_SPECIFIED
    Database manager authentication        (AUTHENTICATION) = SERVER_ENCRYPT
    Cataloging allowed without authority   (CATALOG_NOAUTH) = NO
    Trust all clients                      (TRUST_ALLCLNTS) = YES
    Trusted client authentication          (TRUST_CLNTAUTH) = CLIENT
    Bypass federated authentication            (FED_NOAUTH) = NO
    Default database path                       (DFTDBPATH) = /db2/PRD
    Database monitor heap size (4KB)          (MON_HEAP_SZ) = 90
    Java Virtual Machine heap size (4KB)     (JAVA_HEAP_SZ) = 2048
    Audit buffer size (4KB)                  (AUDIT_BUF_SZ) = 0
    Size of instance shared memory (4KB)  (INSTANCE_MEMORY) = AUTOMATIC
    Backup buffer default size (4KB)            (BACKBUFSZ) = 1024
    Restore buffer default size (4KB)           (RESTBUFSZ) = 1024
    Sort heap threshold (4KB)                  (SHEAPTHRES) = 20000
    Directory cache support                     (DIR_CACHE) = YES
    Application support layer heap size (4KB)   (ASLHEAPSZ) = 15
    Max requester I/O block size (bytes)         (RQRIOBLK) = 32767
    Query heap size (4KB)                   (QUERY_HEAP_SZ) = 1000
    Workload impact by throttled utilities(UTIL_IMPACT_LIM) = 10
    Priority of agents                           (AGENTPRI) = SYSTEM
    Max number of existing agents               (MAXAGENTS) = 1024
    Agent pool size                        (NUM_POOLAGENTS) = 10
    Initial number of agents in pool       (NUM_INITAGENTS) = 5
    Max number of coordinating agents     (MAX_COORDAGENTS) = (MAXAGENTS - NUM_INIT
    AGENTS)
    Max no. of concurrent coordinating agents  (MAXCAGENTS) = MAX_COORDAGENTS
    Max number of client connections      (MAX_CONNECTIONS) = MAX_COORDAGENTS
    Keep fenced process                        (KEEPFENCED) = YES
    Number of pooled fenced processes         (FENCED_POOL) = MAX_COORDAGENTS
    Initial number of fenced processes     (NUM_INITFENCED) = 0
    Index re-creation time and redo index build  (INDEXREC) = RESTART
    Transaction manager database name         (TM_DATABASE) = 1ST_CONN
    Transaction resync interval (sec)     (RESYNC_INTERVAL) = 180
    SPM name                                     (SPM_NAME) =
    SPM log size                          (SPM_LOG_FILE_SZ) = 256
    SPM resync agent limit                 (SPM_MAX_RESYNC) = 20
    SPM log path                             (SPM_LOG_PATH) =
    TCP/IP Service name                          (SVCENAME) = sapdb2PRD
    Discovery mode                               (DISCOVER) = SEARCH
    Discover server instance                (DISCOVER_INST) = ENABLE
    Maximum query degree of parallelism   (MAX_QUERYDEGREE) = ANY
    Enable intra-partition parallelism     (INTRA_PARALLEL) = NO
    No. of int. communication buffers(4KB)(FCM_NUM_BUFFERS) = 4096
    Number of FCM request blocks              (FCM_NUM_RQB) = AUTOMATIC
    Number of FCM connection entries      (FCM_NUM_CONNECT) = AUTOMATIC
    Number of FCM message anchors         (FCM_NUM_ANCHORS) = AUTOMATIC
    Node connection elapse time (sec)         (CONN_ELAPSE) = 10
    Max number of node connection retries (MAX_CONNRETRIES) = 5
    Max time difference between nodes (min) (MAX_TIME_DIFF) = 60
    db2start/db2stop timeout (min)        (START_STOP_TIME) = 10
    gipapp:prdadm 39>

  • Basis work for SAP system copy using DB2 cloning tool

    My company is using the DB2 cloning tool, formerly from MainStar. Our DBAs have used this tool to create a clone of a technical sandbox (ST1) to another DB2 instance (SZ1).
    I am reading through the System Copy for SAP Systems Based on SAP NetWeaver 2004s SR2 ABAP+Java guide and trying to follow the steps.
    As information, our application servers are currently running on zLinux and I am trying to do a system copy of an HA ABAP+Java SID.
    Since we have used the cloning tool, which I would equate to a homogeneous system copy using database specific tools, the guide looks like it says I can skip the Export Preparation and Table Splitting Preparation steps. The only other step for the source system is the Database and Central Instance Export.
    When I execute this step, it creates a dump of the database. This seems useless as we already have a cloned copy of the database.
    Does anyone have the list of Basis tasks for a system copy when the DB2 cloning tool is used?
    Brian

    Nevermind. If someone sets:
    rdisp/j2ee_start = 0
    in an ABAP+Java system, sapinst behaves strangely during the system export and does not give the option to only dump the filesystem. Bug?
    Brian

  • Extracting Values of a Field from a Database Table in SAP ECC System

    Hi,
    I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
    senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
    "6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
    I did not find WA elemen in Output element of Repeater_0
    How can I create WA element?
    Thanks.

    Cemil,
    Set up a SAP JCo Interface action block.  Use the RFC name RFC_READ_TABLE.
    In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
    <?xml version="1.0" encoding="UTF-8"?><FIELDS>
          <item>
            <FIELDNAME>MATNR</FIELDNAME>
            <OFFSET/>
            <LENGTH/>
            <TYPE/>
            <FIELDTEXT/>
          </item>
          <item>
            <FIELDNAME>MTART</FIELDNAME>
            <OFFSET/>
            <LENGTH/>
            <TYPE/>
            <FIELDTEXT/>
          </item>
          <item>
            <FIELDNAME>BSTME</FIELDNAME>
            <OFFSET/>
            <LENGTH/>
            <TYPE/>
            <FIELDTEXT/>
          </item>
          <item>
            <FIELDNAME>XCHPF</FIELDNAME>
            <OFFSET/>
            <LENGTH/>
            <TYPE/>
            <FIELDTEXT/>
          </item>
          <item>
            <FIELDNAME>DATAB</FIELDNAME>
            <OFFSET/>
            <LENGTH/>
            <TYPE/>
            <FIELDTEXT/>
          </item>
        </FIELDS>
    Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}.  You may run into problems with two other fields and optionally they can be removed (set link type to remove xml).  I usually remove them initially for testing.  The two fields are:
    SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
    SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~".  I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
    Once you get this one working, we can explore how to do filtering on the dataset.  Your output should be something like this:
    <?xml version="1.0" encoding="utf-8"?>
    <RFC_READ_TABLE>
      <INPUT>
        <DELIMITER />
        <NO_DATA />
        <QUERY_TABLE>MARA</QUERY_TABLE>
        <ROWCOUNT>20</ROWCOUNT>
        <ROWSKIPS>0</ROWSKIPS>
      </INPUT>
      <TABLES>
        <DATA>
          <item>
            <WA>000000000000000023ROH 00000000</WA>
          </item>
          <item>
            <WA>000000000000000038HALB 00000000</WA>
          </item>
          <item>
            <WA>000000000000000043HAWA 00000000</WA>
          </item>
          <item>
            <WA>000000000000000058HIBE 00000000</WA>
          </item>
          <item>
            <WA>000000000000000059HIBE 00000000</WA>
          </item>
          <item>
            <WA>000000000000000068FHMI 00000000</WA>
          </item>
          <item>
            <WA>000000000000000078DIEN 00000000</WA>
          </item>
          <item>
            <WA>000000000000000088FERT 00000000</WA>
          </item>
          <item>
            <WA>000000000000000089FERT 00000000</WA>
          </item>
          <item>
            <WA>000000000000000098HALB 00000000</WA>
          </item>
          <item>
            <WA>000000000000000170NLAG 00000000</WA>
          </item>
          <item>
            <WA>000000000000000178NLAG 00000000</WA>
          </item>
          <item>
            <WA>000000000000000188NLAG 00000000</WA>
          </item>
          <item>
            <WA>000000000000000288HALB 00000000</WA>
          </item>
          <item>
            <WA>000000000000000358HAWA 00000000</WA>
          </item>
          <item>
            <WA>000000000000000359HAWA 00000000</WA>
          </item>
          <item>
            <WA>000000000000000521HAWA 00000000</WA>
          </item>
          <item>
            <WA>000000000000000578FERT 00000000</WA>
          </item>
          <item>
            <WA>000000000000000597HAWA 00000000</WA>
          </item>
          <item>
            <WA>000000000000000598VERP 00000000</WA>
          </item>
        </DATA>
        <FIELDS>
          <item>
            <FIELDNAME>MATNR</FIELDNAME>
            <OFFSET>000000</OFFSET>
            <LENGTH>000018</LENGTH>
            <TYPE>C</TYPE>
            <FIELDTEXT>Material Number</FIELDTEXT>
          </item>
          <item>
            <FIELDNAME>MTART</FIELDNAME>
            <OFFSET>000018</OFFSET>
            <LENGTH>000004</LENGTH>
            <TYPE>C</TYPE>
            <FIELDTEXT>Material Type</FIELDTEXT>
          </item>
          <item>
            <FIELDNAME>BSTME</FIELDNAME>
            <OFFSET>000022</OFFSET>
            <LENGTH>000003</LENGTH>
            <TYPE>C</TYPE>
            <FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
          </item>
          <item>
            <FIELDNAME>XCHPF</FIELDNAME>
            <OFFSET>000025</OFFSET>
            <LENGTH>000001</LENGTH>
            <TYPE>C</TYPE>
            <FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
          </item>
          <item>
            <FIELDNAME>DATAB</FIELDNAME>
            <OFFSET>000026</OFFSET>
            <LENGTH>000008</LENGTH>
            <TYPE>D</TYPE>
            <FIELDTEXT>Valid-From Date</FIELDTEXT>
          </item>
        </FIELDS>
        <OPTIONS />
      </TABLES>
    </RFC_READ_TABLE>
    Add a repeater sourced on:
    SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
    Link your repeater output to a tracer with this:
    Repeater_0.Output{/item/WA}
    What you will see in each tracer message is a single line of data with all the fields contents concatenated together.  You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc.  Then you can parse out the data you are interested in.
    Give this a try and let me know how you succeeded.
    By the way, I could not find the scenario you referred to.  Can you post a link?
    Regards,
    Mike
    Edited by: Michael Appleby on Jan 12, 2009 5:16 PM

  • SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

    Dear Sir.,
    Am installing sap ECC 6.0 on windows 2008 clustering with db2.
    I got one error in the phase of Configure the database for mscs. The error is  DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
    DB2_INSTANCE=DB2PRD
    DB2_LOGON_USERNAME=iil\db2prd
    DB2_LOGON_PASSWORD=XXXX
    CLUSTER_NAME=mscs
    GROUP_NAME=DB2 PRD Group
    DB2_NODE=0
    IP_NAME = DB2 IP PRD
    IP_ADDRESS=192.168.16.27
    IP_SUBNET=255.255.0.0
    IP_NETWORK=public
    NETNAME_NAME=DB2 NetName PRD
    NETNAME_VALUE=dbgrp
    NETNAME_DEPENDENCY=DB2 IP PRD
    DISK_NAME=Disk M::
    TARGET_DRVMAP_DISK=Disk M
    Best regards.,
    please help me since am already running late with this installation to run the db2mscs utility to Create resource.
    Best regards.,
    Manjunath G
    Edited by: Manjug77 on Oct 29, 2009 2:45 PM

    Hello Manjunath.
    This looks like a configuration problem.
    Please check if IP_NETWORK is set to the name of your network adapter and
    if your IP_ADDRESS and IP_SUBNET are set to the correct values.
    Note:
    - IP_ADDRESS is a new IP address that is not used by any machine in the network.
    - IP_NETWORK is optional
    If you still get the same error debug your db2mscs.exe-call:
    See the answer from  Adam Wilson:
    Can you run the following and check the output:
    db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
    I suspect you may see the following error in the debug.txt:
    Create_IP_Resource fnc_errcode 5045
    If you see the fnc_errcode 5045
    In that case, error 5045 which is a windows error, means
    ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
    couldn't find the "public network" as indicated by IP_NETWORK.
    Windows couldn't find the MSCS network called "public network". The
    IP_NETWORK parameter must be set to an MSCS Network., so running the
    Cluster Admin GUI and expanding the Cluster Configuration->Network to
    view all MSCS networks that were available and if "public network" was
    one of them.
    However, the parameter IP_NETWORK is optional and you could be commented
    out. In that case the first MSCS network detected by the system was used.
    Best regards,
    Hinnerk Gildhoff

  • SAP ECC 6.0 SR3 Cluster failover not working in windows with DB2 UDB V9.1 F

    Dear Expertise,
    We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP5 in windows cluster environment.
    We have installation following instances on nodes 1 and 2.
    Node 1                                                                               
    DB2 database software                                                                       
    Central service instance for ABAP Installation on Shared drive G:          
    First MCSC node to create a cluster group u201Cpdssapgrpu201D                            
    Database group u201Cpgsdbgrpu201D(Shared Drive)                                                  
    Enqueue replication service                                                                  
    CI (central instance)(local Drive)
    Node 2
    DB2 database software
    Additional cluster node
    Enqueue replication service
    DI(dialog instance)(local Drive)
    I can login into the system using both CI and DI.
    if my SAP Cluster group is moved from one node to another i can still login into the system
    But when my DB2 group is moved from node A to node B my SAP services are getting closed
    and i am getting the message database not found
    so please Guide me as soon as possible Friends.
    Thanks and Regards,
    Ravindra
    Edited by: Ravindra Bade on Mar 6, 2009 10:22 AM

    Hi Ravidra
    Have u solved the probelm I also have the same problem when i move the groups from node1 to node2 manually my 2 servrces 00 and 01 are failed not able to bring up again. If You solve the problem please guide me the solution to solve this.
    THanks in advance

  • Installation Cluster SAP ECC DB2

    Hi experts,
    I´m installing SAP ECC with DB2 in a Windows MSCS environment. I already installed all the critical components in the cluster, and now I need to install the CI. I´m using only 2 nodes. I have the following doubt:
    Do I need to install a local CI in the first node and the local DI in the second node and that is enought in case of failure?
    Or
    Do I need to install a local CI in the first node and then a local CI in the second node too?
    In this context CI and DI is the same?
    Because in the installation guide the paragraph is a little bit confuse:
    To protect system components that are non-SPOFs, for example application servers, you have to install them as multiple components. In this case you must install at least two application servers (one central instance and at least one dialog instance) on two different hosts. 
    Thanks a lot.
    Kind Regards

    Hi,
    >> Do I need to install a local CI in the first node and the local DI in the second node and that is enought in case of failure?
    How did you started the installation? You should perform the steps, under "High-Availability System" So, you will install ASCS first. Then, database instance, ERS, Central instance and Dialog instance
    >> To protect system components that are non-SPOFs, for example application servers, you have to install them as multiple components. In this case you must install at least two application servers (one central instance and at least one dialog instance) on two different hosts.
    It means that you should have 2 application servers. If one fails another will take all the resources and continue to the service. In short you will anstall 2 application servers in the HA installation.
    Read and follow the installation guide, very carefully.
    Best regards,
    Orkun Gedik

  • SAP ECC 6.0 SR3 Cluster failover not working in AIX with DB2 UDB V9.1 FP6

    Hi Gurus,
    We have installed the SAP ECC 6.0 SR3 High Availability  with DB2 UDB V9.1 FP6 in AIX cluster environment.
    After installation we are doing the cluster fail test.
    Node A
    Application Server
    Mount Points:
    /sapmnt/<SID>
    /usr/sap/<SID>
    /usr/sap/trans
    Node B
    Database Server
    Mount Points:
    /db2//<SID>
    The procedure followed to do the cluster failover:
    We have down the cluster on Node A and all the resources of the Node A has been moved to Node B.
    On Node B when we issued a command to start the SAP. It says u201Cno start profiles foundu201D
    WE have down the cluster on Node B and  moved the Resource from Node B to Node A .  There the db2 User IDu2019s are not available. We have crated the user Idu2019s manually on Node A. however it did not work.
    Please suggest the procedure to start the sap in cluster failover.
    Best Regards
    Sija

    Hi Sija,
    Can i have detailed scenario in your cluster configuration.
    Means you are saying that going to start cluster package manually, if it is right please make sure that you had the same copy of start, instance profiles of NodeA to Node B. Means you need to maintain two startup, two instance profiles for both nodes. In a normal situation it will picik the profile of node A to start databse from A node. But in a failover situation it will not pick node A profile to start, it should pick Node B s profiles.
    Just make a copy from node A and change the profile name accordingly to Node b. Then try to restart.
    Regards
    Nick Loy

  • SAP ECC 6.0 with DB2 on winds 2008r2 using VMware

    Dear All,
    Request you to guide me in giving some information related to
    -compatibility
    -best practice
    -official guidelines for SAP installation.
    We have purchased SAP ECC 6.0 with DB2 as RDBMS.
    Thanks in advance.
    by
    Harika N

    I got information
    Note 1130801 - DB2 LUW, DB2 z/OS release for VMware, XEN, and Hyper-V
    The usage of DB2 Version 9.1 for LUW, DB2 Version 9.5 for LUW, and DB2 9.7 for LUW on Windows and Linux (SUSE and RedHat) with VMWare, KVM, and XEN is permitted and supported by SAP and IBM.
    Kind regards,
    Harika N

  • Error while Importing Integration kit  Transport Requets into SAP ECC 5.0

    HI ,
    1.  AT BO side -> I can see the many roles, but under 'role import tab'  in CMC  when i add any 'role' and click on update button,
         system showing an  error as below .
       "Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
    2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC    
       5.0 When i  imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
      for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
      I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
      contain similar error. Now when i try to login into sap  its going dump.Is there any possibility of reverting back the transport
      requests.
      Pls help me to fix these issues.
    Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AM

    Hi ingo,
    Now i can able to transport successfully after following the order.
    Thank you very much
    Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
    Earlier i have imported non unicode request numbers into sap unicode system.
    tats why i got error.
    Now i have imported unicode request number to unicode sap system with sequence.
    Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM

  • The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

    Hi,
    I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
    I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
    Error when sharing file system export (share) saploc : The cluster resource could not be found
    I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
    Can anyone please let me know where am I going wrong ?
    NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
    Regards,
    Varadharajan M

    Yes Krishna,
    I've not created any shared folders manually and I've used the "Use domain of current user" option.
    Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
    <SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
    Regards,
    Varadharajan M

  • SAP Product and REACH Compliance 2.0 dese not add-on in SAP ECC 6.0 EHP5

    hi experts,
    I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
    I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
    But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
    ========================================================================
    OCS package SAPK-360COINTDAGBCA does not match the current software component vector
    ========================================================================
    any idea pleas...
    For reference
    ==========================
    tp version : 720 patch 90
    R3trans version : 720 patch 89
    SPAM/SAINT : 7.02/43
    SAP_BASIS : 702 sp 07
    SAP/EA_APPL : 605 sp 04
    Thanks and regards,
    Jun

    Hi Jun,
    You could check the upgrade logs and traces at the location ../usr/sap/<sid>/upg/abap/logs.
    Check for the latest last changed logs. Mos probably a prerequisite package for the REACH 2.0 installation is not included in the upgrade. The detailed logs should mention which prerequisite is missing.
    Fore reference see thread: EHP4 upgrade error on SAPK-603DHINEAPS
    Regards,
    Srikishan

  • Reach 2.0 does not match preriquisite in SAINT on SAP ECC 6.0 EHP5

    hi experts,
    I upgraded ECC 6.0 EHP5 and then try to add-on SAP Product and REACH Compliance 2.0 in SAP ECC 6.0 EHP5.
    I aleady knew REACH 2.0 is available with ERP 6.0 EHP5 through Note 1389561 - SAP PRC 2.0: Installation and upgrade for ERP 6.0 and SAP Note 1456663 - SAINT: Enhancement Package 5 components on NW 7.02.
    But unfortunately, When I try to install REACH 2.0 using SAINT, The error message was pop-up
    ========================================================================
    OCS package SAPK-360COINTDAGBCA does not match the current software component vector
    ========================================================================
    any idea pleas...
    For reference
    ==========================
    tp version : 720 patch 90
    R3trans version : 720 patch 89
    SPAM/SAINT : 7.02/43
    SAP_BASIS : 702 sp 07
    SAP/EA_APPL : 605 sp 04
    Thanks and regards,
    Jun

    Hello Lee
    may be OSS Note 1386600 might help. No further idea so far.
    With best regards
    C.B.

  • SAP ECC error:'Migration Monitor' exits with error code 103.

    Hi All,
    I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
    I am stuck at the import ABAP.Getting error
    ERROR 2008-08-08 16:10:53
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    1) imort_monitor.java.log-->contains
    java version "1.4.2_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
    Loading of 'SAPVIEW' import package: ERROR
    Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
    2)import_monitor.log
    ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPVIEW' import package is interrupted with R3load error.
    Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
    For mode details see 'SAPVIEW.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    INFO: 2008-08-08 16:10:52
    All import packages are processed.
    WARNING: 2008-08-08 16:10:52
    1 error(s) during processing of packages.
    INFO: 2008-08-08 16:10:52
    Import Monitor is stopped.
    3)SAPVIEW.log
      error message returned by DbSl:
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) ERROR: DDL statement failed
    (CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001"  ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001",  T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
    DbSlExecute: rc = 103
      (SQL error -942)
      error message returned by DbSl:
    (DB) INFO: disconnected from DB
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
    Only SAPDB: SAPSID srvice of SAP DB is only up.
    No other services of database are  up.And i am not able to up the other services also.
    Is it required to up the other services?
    If not?
    Why this error is occuring?
    Any help will be appreciated.
    Thanks&Regards
    Manisha das

    Hello Manisha,
    The one of the possible reasons for this is due to lack of H/W.
    Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
    If the issue is with H/W, then this should fix the issue.
    Hope it helps,
    Regards,
    Satish.

Maybe you are looking for