Cluster Event Warning after Installing SCDPM 2012 R2

Hi
I just installed SCDPM 2012 R2 on Server 2012 R2 Box (that is also a cluster node), after installing the SCDPM 2012 R2 on Hyper-V Cluster Node i am getting below Warning in Cluster Events. I just want to know what are the impact of this event ..??
Is it also impacts on SCDPM Backup??? is any solution to resolve this warning.
Error
Shailendra Dev

Hi Shailendra Dev,
This event can caused by third Party filter driver has been identified, you can refer the following article to find out the incompatible driver then uninstall the software.
More related information:
Troubleshooting ‘Redirected Access’ on a Cluster Shared Volume (CSV)
http://blogs.technet.com/b/askcore/archive/2010/12/16/troubleshooting-redirected-access-on-a-cluster-shared-volume-csv.aspx
Allocated Altitudes
http://msdn.microsoft.com/en-us/library/windows/hardware/dn265170(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

After installing SCCM 2012 R2 CU4, I show a Distribution Point warning that won't clear.

I recently installed SCCM 2012 R2 CU4 on a LAB environment, and nowhere is it more important to wait until all requisite site roles are reinstalled before doing anything else.
I did, and still do, have an warning/ error on the Site components that shows up on one of the child primary sites after the CU4 installation.
Distribution Manager has not tried to install IIS component of operating system to distribution point “[“Display=\\SCxxx\”]MSWNET:[“SMS_SITE=xxx”]\\xxx\”. You should install and configure IIS manually. Please ensure RDC is also enabled.
IIS is installed, RDC is enabled, but I get this error. What could be the real issue?

Hi,
So you have tried to reinstall IIS conponents and DP?
Have you checked the distmgr.log? Anything helpful?
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Storage Provider not responding after installing SCVMM 2012 R2 UR5

After installing UR5 registered storage providers show Not Responding. I had two registered, both scale out fileservers in the same domain as VMM that were working fine before UR5. Sofs running 2012R2 with latest patches
Trying to refresh provider:
Error (26101)
Storage discovery of provider {0869e333-12f6-44c7-b6b7-7139530a18c9} for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 46010.
Recommended Action
Specify valid provider, port and user credentials for storage discovery.
The other one I deleted to recreate it. The deletion yielded:
Error (26312)
Unregistering the storage subsystem with unique ID {bca715fb-ce94-47f5-9558-f8e862c3e7dc}:SS failed from VMM01.hyper-v.blaa.com with error code 46005 [SM_RC_SUBSYSTEM_NOT_REGISTERED].
However the storage provider was removed and now if I run Get-SCStorageProvider i can't see it. When I try to add it back I get an error :-(
Error (26311)
Registration of the storage subsystem ss02.hyper-v.blaa.com for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 4 [SM_RC_GENERIC_FAILURE].
Not sure what's happening but looking at the roleholder in the storage cluster I have an error in the VMI-Activity log:
Log Name: Microsoft-Windows-WMI-Activity/Operational
Source: Microsoft-Windows-WMI-Activity
Date: 2015-02-23 00:11:52
Event ID: 5858
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: xxx
Description:
Id = {99940B20-4D23-0003-FC56-D599234DD001}; ClientMachine = SS02-1; User = HYPER-V\xxx; ClientProcessId = 332; Component = Unknown; Operation = Start IWbemServices::GetObject - root\Microsoft\Windows\Storage\Providers_v2 : SPACES_StorageProvider.ObjectId="{0869e333-12f6-44c7-b6b7-7139530a18c9}";
ResultCode = 0x80041001; PossibleCause = Unknown
And a Security error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2015-02-23 00:11:52
Event ID: 4656
Task Category: Other Object Access Events
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ss02-1.
Description:
A handle to an object was requested.
Subject:
Security ID:
HYPER-V\xxx
Account Name:
xxx
Account Domain:
HYPER-V
Logon ID:
0x117FC549
Object:
Object Server:
WS-Management Listener
Object Type:
Unknown
Object Name:
Unknown
Handle ID:
0x0
Resource Attributes:
Process Information:
Process ID:
0x14c
Process Name:
C:\Windows\System32\svchost.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
MAX_ALLOWED
Access Reasons:
Access Mask:
0x2000000
Privileges Used for Access Check:
Restricted SID Count:
0

UPDATE:
Managed to get a window to reboot the storage cluster with the incomplete delete. After rebooting the registration of the storage provider completed and is now ok. Will try to reboot the other storage cluster as well.

CSA : Cluster not started after installing CSA 6.0.0.209

After installing CSA 6.0.0.209 on Win2003 Server,
the cluster service is not started.
The server said that the network connection service is not started.
The CSA is registered in the Management Center.
And the group is in LEARN MODE.
What is the source of this problem?

First off, do you get any events from that machine in the csamc ? If not, does it solve the problem if you disable csa and try to start the cluster service ? If so, then you could have a deny rule that has no log (even though that is highly unlikely if you are using the default policies) Also what clustering software are you using, microsoft or some other 3rd party sw ?
Jan

"Unable to connect to the remote server" error message (ID 6102) in event view after installing MOSS 2007

Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type:        Error
Event Source:    Office SharePoint Server
Event Category:                Launcher Service Event ID:              6102Date:                     11/27/2007Time:                     8:22:17 AMUser:                     N/AComputer:          MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.

Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog

Repporting problem after install SCCM 2012 SP1

Hi there:
After install SP1, our reporting does not work any more. It pop up following error messages.
Any helps on this?
Thanks..................................
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Invalid object name 'fn_rbac_StatusMessagesAlerts'.
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)

Suspiciously similar to my report error after upgrading to SCCM 2012 R2 today:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Query execution failed for dataset 'DataSet1'. (rsErrorExecutingCommand)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Procedure or function 'sp_CP_StatusPercent_All' expects parameter
'@UserSIDs', which was not supplied.
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Any ideas?

[Forum FAQ] Management Point fails after installing SCCM 2012 SP1

Symptom:
The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
You might see some errors in mpMSI.log like listed below.
“Setup was unable to compile the file CcmExec_Global.mof”
“The error code is 80041002”
Cause:
Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
Resolution:
1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete _NAMESPACE.Name=”ccm”
3. Install Management Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Symptom:
The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
You might see some errors in mpMSI.log like listed below.
“Setup was unable to compile the file CcmExec_Global.mof”
“The error code is 80041002”
Cause:
Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
Resolution:
1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete _NAMESPACE.Name=”ccm”
3. Install Management Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

DPM 2012 R2 long backup to tape job randomly fail after installing SCCM 2012 Client

Hello,
I'm managing a two nodes 2012 R2 file server cluster that contains a 16To CSV. I'm using DPM 2012 R2 to backup this entire shared volume directly to LTO 4 tapes, the job last about 55h.
Since SCCM 2012 client has been installed(I don't manage it), the tape jobs are failing ramdomly after several hours with the error:
Type: Tape backup
Status: Failed
Description: The DPM service was unable to communicate with the protection agent on serverX.xxxx.xxx . (ID 52 Details: The semaphore timeout period has expired (0x80070079))
More information
End time: 19/07/2014 03:11:06
Start time: 18/07/2014 22:00:00
Time elapsed: 05:11:05
Data transferred: 768 289,56 MB
Cluster node serverX.xxxx.xxx
Source details: G:\
Protection group members: 1
Details
Protection group: File Server Tape Protection
Library: Quantum PX500 Series Medium Changer
Tape Label (Barcode): File Server Tape Protection-00000230 (000043L4)
If I uninstall SCCM 2012 client, no more issue, backups succeed. I've asked our SCCM team, no specific task has been scheduled or deployed in SCCM.
I can't see anything abnormal in logs.
Any idea?

I have disabled "Configuration Manager Maintenance" and I have also tried to set the registry value HKLM\Software\Microsoft\CCM\CcmEval\NotifyOnly to TRUE and still the same issue.
I can't find any correlated errors in the Windows event logs, task scheduler history neither in the DPM logs.
I've increased the log level of DPM by following the following procedure
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/how-to-collect-dpm-verbose-logs.aspx
Now i'm suspecting the maintenance job of Windows 2012 R2, i'll try to disabled this task. But the fact is that I don't have this backup issue if SCCM 2012 client is not installed.
I'm waiting for next logs and will keep you informed

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Hyper-V Failover Cluster Networking Configuration After Install

Hello All,
Is it possible to install hyper-v and failover or in other words create a hyper-v failover cluster and then configure the networking part of the solution later? As I am coming into
terms with the networking part of it, wanted to do it later after the install. Is it possible?
And from later configuration, I am trying to say, creation of NIC Team, Virtual NICs, VLAN tagging, etc.

Hi,
Failover cluster deployment requires network connectivity between cluster nodes. You can't create a cluster without properly configured TCP\IP on cluster nodes.
http://OpsMgr.ru/

Hyphenation Services Warning after installing CC

Recently upgraded to CC. Now when I open InDesign files, I get warning message:
"Hyphenation breaks may change if you edit the text in the document.
The following hyphenation services are not installed on this system -
Proximity (English: USA)"
I click OK and files open, but how do I fix this?

Hi there, I've been dealing with this problem for a long while and it's finally driven me crazy enough that I needed to resolve. I'm also about as stubborn as you can get when it comes to uninstalling / reinstalling, and that often fixes one thing and breaks two others.
So I dug a bit into my TimeMachine back up and discovered where the Proximity Hyphenation files used to live in a copy of InDesign CC. Copied them to the current install of InDesign CC 2014 and relaunched. All appears to be working good so far and the ERROR is gone!
Drop them into the "Providers" folder...
/Adobe InDesign CC 2014/Plug-Ins/Dictionaries/LILO/Linguistics/Providers/
You can download the files from my share (until I get yelled at) here: http://www.mediafire.com/download/ex4rh9y94y5ndnz/Proximity.zip
But it would be nice if Adobe posted these for download somewhere. If that is the case, please drop that link in the thread!
This may or may not blow up your InDesign, so please use with caution.
Steve

VssNullProver stopped after installing Update Rollup 3 for System Center Data Protection Manager 2012 R2

I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
we use System Center Virtual Machine Manager 2012 R2.
Something is not ok with Update Rollup 3. Any suggestions?
Boudewijn Plomp, BPMi Infrastructure & Security
Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

Hi
SEE NEW BLOG:
Support Tip Service Manager alert for the VSSNullProvider service after installing
DPM 2012 R2 UR3
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
Thanks!
Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

Failed when running Prerequsites SCDPM 2012 R2 : Status="FailedToPerform" CheckId="RemoteDbMsi"

I installing SCDPM 2012 R2, on the step Prerequisites check, I got a error bellow. SQL server is remotely with cluster SQL Server 2012 SP2.
Please advise wht should i do.. :(
====
<?xml version="1.0" encoding="UTF-16"?>
-<Report xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="Processor"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="Memory"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="MMCVersion" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=55423"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB962975" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=184896"/>
<CheckResult InstallableForRemoteSQL="true" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB975759" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=184897"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB2279787" ActionUrl="http://support.microsoft.com/kb/2279787"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="KB2223201" ActionUrl="http://support.microsoft.com/kb/2223201"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="MonadSoftware" ActionUrl="http://go.microsoft.com/fwlink/?LinkId=178542"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="DotNetRequiresReboot"/>
<CheckResult InstallableForRemoteSQL="true" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SISFilter"/>
<CheckResult InstallableForRemoteSQL="true" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="MSIVersion"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RebootRequired"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlServerTools"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlServer"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ReportingServer"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="See the log file for details and try again." ErrorMessage="Failed to perform the check." Status="FailedToPerform" CheckId="SqlAgentService"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="See the log file for details and try again." ErrorMessage="Failed to perform the check." Status="FailedToPerform" CheckId="SqlServerService"/>
<CheckResult InstallableForRemoteSQL="false" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlServerReportingServices"/>
<CheckResult InstallableForRemoteSQL="false" Installable="true" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlReportServerService"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ActiveDirectory"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="SqlEval"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ClientTCPEnabled"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RemoteDbDPMInstalled"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="ReportingSecureConnectionLevel"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RemoteDbDiskSpace"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="" ErrorMessage="Check Succeeded" Status="Success" CheckId="RemoteDbTCP"/>
<CheckResult InstallableForRemoteSQL="false" Installable="false" Resolution="See the log file for details and try again." ErrorMessage="Failed to perform the check." Status="FailedToPerform" CheckId="RemoteDbMsi"/>
</Report>
====

For the default instance no. Your SQL server is on another server? No _ in the name of the server?
Do you mount the ISO or extract it and launch the setup?
Ensure that the DPM ISO is not corrupted. I had a similar problem one time, I downloaded the ISO again and it works fine.

SCDPM 2012 R2 High Avalibility Design?

Hello Everyone,
Can we Install SCDPM 2012 R2 in High Availblity Mode?
If yes What's the Design for SCDPM high availibility?
Thnks.......

Hello Everyone,
Can we Install SCDPM 2012 R2 in High Availblity Mode?
If yes What's the Design for SCDPM high availibility?
Thnks.......
Hi,
There is not a High Availability solution for DPM such as clustering DPM servers. The options you do have are
Primary and Secondary DPM servers, DPM chaining, or
Cyclic protection. Here is a breakdown of each:
Primary to secondary protection: The database and replicas stored on a primary DPM server can be backed up to a secondary DPM server. If the primary server fails the secondary server continues to back up protected workloads.
For more on Primary to secondary protection:
http://technet.microsoft.com/en-us/library/jj244598.aspx
DPM chaining: A chain of DPM servers provide protection, and each server protects the next one in in the chain. For example:
DPM1 is protected by DPM2 (DPM1 is the primary and DPM2 is the secondary).
DPM2 is protected by DPM3 (DPM2 is the primary and DPM3 is the secondary)
To setup chaining:
http://technet.microsoft.com/en-us/library/hh758194.aspx
Cyclic protection: One DPM server is backed up by another DPM server, and vice versa. So that DPM1 protects DPM2, and likewise DPM2 protects DPM1.
More on Cyclic protection:
http://technet.microsoft.com/en-us/library/jj244597.aspx#BKMK_Cyclic
I hope this adds some clarification around this.
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Cluster Event Warning after Installing SCDPM 2012 R2

Similar Messages

Maybe you are looking for