Cluster.exe RESOURCE get error like 1214

Dear Team,
we have faced below issue when we install the ECC on windows cluster. Can you please suggest how may i resolve the error. please find my screen shot for your further clarifications.
Execution of the command "cluster.exe RESOURCE "SAP IEP NetName" /PRIV
Name= 10.23.18.67" finished with return code 1214. Output:

Hi,
This is SAP business one system administration forum. Please find correct forum and repost above discussion to get quick assistance.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Similar Messages

Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I am getting error like "nca_connect_server: cannot communucate to host "

I am getting error like "nca_connect_server: cannot communucate to host " while replaying my script through Loadrunner 9.1
virtual User Script started
Starting action vuser_init.
vuser_init.c(12): nca_set_connect_opt("SCALE_INFO")
vuser_init.c(16): Error: nca_connect_server: cannot communicate with host
PLease give me some solutions.
you can post me in my email id: [email protected]

Hi,
Please see if (Note: 376631.1 - Forms Server Loadbalancing Using Metrics Server Client Not Working with Mercury Loadrunner) helps.
Regards,
Hussein

Getting error like thisThe import org.apache.poi cannot be resolved

Hi
i am new to this poi concept,i have downloded the pio 3.0 final from it.i have adde those plugind to eclipse then i have wrote a sample class form poi then ia m getting error like this .what might be the problem here.
can any one help me here
vijay

Hi guys,
u are right,
at last this problem is rectified here,what happend was i have copied jars from src not from poi 3.0.1-final-bin,here i have copied these jars here,
poi-3.0.1-FINAL-20070705,poi-contrib-3.0.1-FINAL-20070705,poi-scratchpad-3.0.1-FINAL-20070705.
now it is working here.i got the out put for the above code also.
so here my question is i have to pass this result to another class where it it reads only text ,for this i have used this concpet coz i have lot files other than text,how can i pass this to my class.
vijay

Hi sap installation getting error like sapgui not connectyed to localhost mechine

hi sap installation getting error like sapgui not connectyed to localhost mechine

Hi ,
Can you please update where did the installation fail and installation fail logs.
did you manually try to start sap? what does the start log say after staring up. did you install the system with some ip in the host file . Which os u are doing the install. is the data base process running.
Thanks
Rishi Abrol

HT201413 iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

Mikey, I have the exact same problem. Dropped my 3gs on Thanksgiving, phone was not responsive, plugged into the wall charger, went to grey iPhone restore screen, then said to connect to itunes. So I plugged it into itunes but itunes wont recognize it nor will my computer. I searched the internet for hours with no success. I tried to change USB ports and cords, tired removing the SIM card, reinstalled itunes, everything. When I put it in DFU mode itunes recognizes an iphone in recovery mode, so I click restore and update, then I get error 1602 every time. My iPhone also loses power when I unplug it from the wall. I do not know what to try next. You are the only person I have found with the same exact problem I have. I will update you if I find a way to get my phone working again and I hope you will do the same. I'm very frustrated

Getting error like "The following tags were not closed ..."

Hi,
I am getting an error like "The following tags were not closed <Main Report Name>. Error processing resource 'http://abc.cdf.bnm/OA_CGI/FNDWRR.e..."
Issue is , TAG is breaking with main report name.
Any suggestions would be appreciated.
Edited by: user12086550 on May 10, 2010 5:33 AM

I'm having the same problem, but how did you resolved it??
my sub query is running good in toad. this is my xml
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="Asset_Loc_Change" description="Change_in_Asset_Location_and_Account" version="1.0">
     <properties>
          <property name="xml_tag_class" value="upper"/>
          <property name="include_parameters" value="true"/>
     </properties>
     <parameters>
          <parameter name="P_START_DATE" dataType="varchar2"></parameter>
          <parameter name="P_END_DATE" dataType="varchar2"></parameter>
          <parameter name="P_BOOK_NAME" dataType="varchar2"></parameter>
     </parameters>
     <lexicals>
     </lexicals>
     <dataQuery>
          <sqlStatement name="LOC_DETAIL">
               <![CDATA[
select
ASSET_NUMBER,DESCRIPTION,ASSET_CATEGORY,trunc(MAX(DATE_CHANGED)) DATE_CHANGED,
MAX(OLD_ACCOUNT) OLD_ACCOUNT,Max(NEW_ACCOUNT) NEW_ACCOUNT,Max(OLD_LOCATION) OLD_LOCATION,Max(NEW_LOCATION) NEW_LOCATION
from(
select distinct
fad.asset_number,
fad.ATTRIBUTE_CATEGORY_CODE ASSET_CATEGORY,
fad.description DESCRIPTION,
max(fdh.DATE_EFFECTIVE) DATE_CHANGED,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8) OLD_ACCOUNT,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8, NULL) NEW_ACCOUNT,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1) OLD_LOCATION,
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1, NULL) NEW_LOCATION
from
fa_distribution_history fdh,
fa_locations fal,
FA_CATEGORIES CAT,
fa_additions fad,
gl_code_combinations gcc,
fa_books fb
where
1=1
and fdh.DATE_EFFECTIVE between to_char(trunc(:P_START_DATE)) and to_char(trunc(:P_END_DATE))
and fal.location_id = fdh.location_id
and fad.asset_id = fdh.asset_id
and fdh.code_combination_id = gcc.code_combination_id
and fb.book_type_code = fdh.book_type_code
and fb.book_type_code = to_char(:P_BOOK_NAME)
and fb.asset_id = fdh.asset_id
Group by
fad.asset_number,
fad.ATTRIBUTE_CATEGORY_CODE,
fad.description
,NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), gcc.segment1||'.'||gcc.segment2||'.'||gcc.segment3||'.'||gcc.segment4||'.'||gcc.segment5||'.'||gcc.segment6||'.'||gcc.segment7||'.'||gcc.segment8, NULL),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), NULL, fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1),
NVL2(to_char(fdh.TRANSACTION_HEADER_ID_OUT), fal.segment4||'-'||fal.segment3||'-'||fal.segment2||','||fal.segment1, NULL)
GROUP BY
ASSET_NUMBER,ASSET_CATEGORY,DESCRIPTION;
]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G_ASSET_LOC" source="LOC_DETAIL">
               <element name="ASSET_NUMBER" value="ASSET_NUMBER"/>
               <element name="DESCRIPTION" value="DESCRIPTION"/>
               <element name="ASSET_CATEGORY" value="ASSET_CATEGORY"/>
               <element name="DATE_CHANGED" value="DATE_CHANGED"/>
               <element name="OLD_ACCOUNT" value="OLD_ACCOUNT"/>
               <element name="NEW_ACCOUNT" value="NEW_ACCOUNT"/>
               <element name="OLD_LOCATION" value="OLD_LOCATION"/>
               <element name="NEW_LOCATION" value="NEW_LOCATION"/>
          </group>
     </dataStructure>
</dataTemplate>

Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

Hi All,
I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
I have set the authentication scheme to Oracle Application server Single Sign On.
When i run the application i am getting the below error.
Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
Please help me to resolve this.
Thanks and Regards,
Suhas

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

When building an exe I get 'Error 1051' due to not copying Labview...\IMAQ GetPalette

I am trying to build using Labview 8.5 rather than 8.6 for compatibility reasons. However, since installing 8.6 and porting my code over to that as well I am finding that now I reset up a build script for 8.5 it no longer functions. The build fails with :
Error copying files.
Source: C:\Program Files\National Instruments\LabVIEW 8.5\vi.lib\Vision\Display.llb\IMAQ GetPalette
Destination: C:\Work folder\Programs\builds\Acoustic\SamWare Application_8-5\internal.llb\IMAQ GetPalette
Invoke Node in AB_Source_VI.lvclass:Copy_SourceItem.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
<APPEND>
Method Name: <b>Set Path</b>
The file exists but gives the same error if I include 'IMAQ GetPalette' in the build explicitly having copied it to the application directory.
Any suggestions?

Hello blown_leaf,
I have been looking at the error message you have been receiving, and would like to help you. If I understand your post correctly, you have been able to prepare a Build task in Project Explorer in LabVIEW 8.6 and execute it without any problems. However, you now require a program compatible with LabVIEW 8.5, so you are building the same Build task in LabVIEW 8.5. Is this correct?
If this is the case, have you individually saved each VI for version 8.5? I also see that you are using IMAQ as part of your VI. Does your VI have multiple instances of IMAQ GetPalette within it?
Regards,
George T.
Applications Engineering Specialist
National Instruments UK and Ireland

Help me on import file getting error like this

C:\Documents and Settings\Administrator>imp borao1/borao1 file='f:sdn01p_1.dmp
Import: Release 9.2.0.1.0 - Production on Wed Mar 22 13:17:00 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export file created by EXPORT:V09.02.00 via direct path
Warning: the objects were exported by ORACLE, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
export server uses UTF8 NCHAR character set (possible ncharset conversion)
IMP-00031: Must specify FULL=Y or provide FROMUSER/TOUSER or TABLES arguments
IMP-00000: Import terminated unsuccessfully
======================================================
C:\Documents and Settings\Administrator>imp borao1/borao1 file='f:sdn01p_1.dmp'
fromuser=universe40 touser=borao1;
Import: Release 9.2.0.1.0 - Production on Wed Mar 22 13:18:59 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export file created by EXPORT:V09.02.00 via direct path
Warning: the objects were exported by ORACLE, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
export server uses UTF8 NCHAR character set (possible ncharset conversion)
. importing UNIVERSE40's objects into BORAO1;
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
===================================================

If you want only to import 1 schema (= 1 user), you need to create the schema before running the import with CREATE USER:
CREATE USER universe40 IDENTIFIED <password>
DEFAULT TABLESPACE <ts data>
QUOTA UNLIMITED ON <ts data>
TEMPORARY <temp ts>;
where <ts data> is the tablespace name for your data
and <temp ts> is the temporary tablespace name
and give this user the privilges to create objects:
GRANT RESOURCE TO univers40;

Hi I am trying to install SQL Server 2008 R2 Express edition, I am getting error like "unhandled exception has occurred in your application"

In that system Microsoft Framework 4.o and 3.5.1 is installed even then i am getting the error then i uninstalled and again installed framework same error occurring.

Hi Chandra,
As other post, please help to post the summary and detail logs for analysis.
Based on my knowledge, the error “unhandled exception has occurred in your application” always happens along with the following message when installing SQL Server 2008 R2:
“An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
or one of its dependencies. The system cannot find the file specified. “
If you encounter such issue, please perform the following steps to solve it.
1.Go to your app data directory by going to start > run > %appdata% .
2.This will by default take you to the "roaming" folder, go up one directory and move into the "Local" folder.
3. Go to the "Microsoft_Corporation" folder.
4. Delete the relevant folders from the "Microsoft_Corporation" folder.
For more details, please review the following blog.
SQL Server 2008 R2 will not install - Unhandled Exception has occurred in your application
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Getting error like Information was stored in the source system

hai friends...
In Process chain, selecting particular info package delta and then selcting display messages am getting like...
"Information was stored in the source system"
data is not loading in to data targets....
Edited by: ganandkumar on Sep 15, 2010 10:24 AM

i am planning to load data in to PSA ...so i started and then it is showing like "
The last delta update was incorrect !
Therefore, no new delta update is possible.
You can cancel the request or:
Attempt to load the data of the last delta update again
so now i need to run this and i have to load data in PSA ...
suggest me friends...

When I click on Firefox.exe I get error message Can't start Firefox.exe as js3250.dll missing. When I try to re-download Firefox I get message saying can't download because Firefox is already running, but it isn't. How and where can I get js3250.dll?

Why punish me for a few too many keystrokes by deleting what I have already entered below my question. You're becoming MS.

See these posts about the same problem:
*[/questions/798251]
*[/questions/823473]

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Getting error in POI like ""The import org.apache.poi cannot be resolved""

Hi
i am getting error like this."""The import org.apache.poi cannot be resolved"" so what i need do here. i think i have to get the jars for it .any one who worked with the concept of poi can help me here. i have been using eclipse ide here.i have down loded pio.3.0-final ,then i have added jar files to eclipse. still i am getting this error here

HI
i have checked that in build path it is saying it is there os it can't add them,here i have taken as a class proj not as web proj.
i have started this topic today only.so idon't know much abt this.i have got this code from poi downloads.here is the code for
import org.apache.poi.hssf.usermodel.HSSFWorkbook;
import org.apache.poi.hssf.usermodel.HSSFSheet;
import org.apache.poi.hssf.usermodel.HSSFRow;
import org.apache.poi.hssf.usermodel.HSSFCell;
import java.io.FileInputStream;
* This is a sample to Read an Excel Sheet using
* Jakarta POI API
* @author Elango Sundaram
* @version 1.0
public class ReadXl {
/** Location where the Excel has to be read from. Note the forward Slash */
public static String fileToBeRead="D:/JTest/JPOI/Read.xls";
public static void main(String argv[]){
try{
                    // Create a work book reference
                    HSSFWorkbook workbook = new HSSFWorkbook(new FileInputStream(fileToBeRead));
                    // Refer to the sheet. Put the Name of the sheet to be referred from
                    // Alternative you can also refer the sheet by index using getSheetAt(int index)
                    HSSFSheet sheet = workbook.getSheet("Sheet1");
                    //Reading the TOP LEFT CELL
                    HSSFRow row = sheet.getRow(0);
                    // Create a cell ate index zero ( Top Left)
                    HSSFCell cell = row.getCell((short)0);
                    // Type the content
                    System.out.println("THE TOP LEFT CELL--> " + cell.getStringCellValue());
}catch(Exception e) {
System.out.println("!! Bang !! xlRead() : " + e );
}

Cluster.exe RESOURCE get error like 1214

Similar Messages

Maybe you are looking for