Cluster Health Monitor - Gui does not connect to loggerd on a 11.2.0.2 RAC
Hi,
i'm implementing an 4-Node Oracle RAC 11.2.0.2 on Oracle Linux 5.6.
In 11.2.0.2 the chm is integrated in the grid-home. The necessary daemons are running properly. If I use oclumon on a node i get the collected data.
The manual explains that i have to download and install the client-tool separately. I get it from otn and installed it on several systems (linux 32Bit, linux 64Bit, a Cluster Node, windows) using the command "crfinst.pl -g <path>".
Running the gui "crfgui -m rac01" i receive the following output:
Cluster Health Analyzer V1.10
Look for Loggerd via node rac01
+?E: Cannot connect to Loggerd on rac01+
Reason: Invalid node name
Note: Node localnode is now up
+?E: Cannot connect to Loggerd on rac01+
Reason: Invalid node name
+...Polling for connection to Loggerd on rac01, duration: 60sec+
The node name rac01 can be resolved by dns. If i execute "crfgui -m <ip-address>" i receive the same error.
I wonder that the version of the server side is 2.0 whereas the version you can get from otn is 1.1.
regards,
Dirk
Hi Dirk,
there is no GUI yet released for the CHM which comes with 11.2.0.2
Regards
Sebastian
Similar Messages
-
Cluster Health Monitor Links not working
Is anyone else having an issue downloading the cluster health monitor?
I keep receiving content not found. I have a pre 11.2 database that I would like to give this a test run on.
Thank youuser7002963 wrote:
Is anyone else having an issue downloading the cluster health monitor?
I keep receiving content not found. I have a pre 11.2 database that I would like to give this a test run on.
Thank youThats right, i tried and its not working.
Possible workaround: Call oracle global support. You'll get the link in google.
Or
Raise an SR with support.oracle.com if you have valid CSI
The latest copy of Cluster Health Monitor (IPD/OS) is always with the install image if the version is 11.2.0.2 or greater -
Cluster Health Monitor/crfgui
Hi all,
After successful installation of CHM I cannot connect to my cluster via crfgui tool (from Windows
to Linux).
Cannot connect to Loggerd on "scan-name".
.. reason: Connection context invalid .. Pooling for connection to Loggerd on "scan-name".
Please help
P.S I already read the
"http://levipereira.wordpress.com/2011/07/19/monitoring-the-cluster-in-real-time-with-chm-cluster-health-
monitor/"
thanks Levi :)
and my G.I version is 11.2.
OS OEL5.7
*[root@rac2 rac2]# /etc/init.d/init.crfd status*
OSysmond running with PID=3327.
OLoggerd running with PID=3552.
oproxyd running with PID=3639.
*[root@rac2 rac2]# netstat -anp | grep 3639*
tcp 0 0 192.168.7.68:61027 0.0.0.0:* LISTEN 3639/oproxyd
udp 0 0 127.0.0.1:36850 0.0.0.0:* 3639/oproxyd
udp 0 0 127.0.0.1:20909 0.0.0.0:* 3639/oproxyd
unix 2 [ ACC ] STREAM LISTENING 15016 3639/oproxyd /var/tmp/.oracle/srac2DBG_PROXY
unix 3 [ ] STREAM CONNECTED 15015 3639/oproxydHi,
The GUI (released only to 11.2.0.1) is independent of the CHM version shipped with Oracle Grid Infrastructure. However and right now, there is unfortunately no ETA when the GUI will be available for the integrated CHM 11.2.0.2 or higher (11.2.0.3 for example, once out). The GUI is optional as far as CHM and its purpose is concerned, although it is useful.
What's command line you are using to connect GUI on your CHM? Your are using Public IP or SCAN IP?
Levi Pereira -
Cluster Health Monitor install
Hi,
I'm try to install Cluster Health Monitor for 11gR2 in Windows
The installation was success
But there is some perl script in the c:\"Program Files"\oracrf\install\crfinst.pl i have to run it
I try to run it as follow
C:\Grid_home\perl\bin\perl -Ic:\grid_home\perl\lib -Ic:\"Program Files"\oracrf\install\ c:\"Program Files"\oracrf\install\crfinst.pl -f ---> Not success " Invalid argument"
I thing the problem in the name "Program Files" bcz when i copy the folder and rename it ,it run but give me other problem i thing i have to run it from same Location "Program File"
but how??
Thanks in advancesami wrote:
Hi,
I'm try to install Cluster Health Monitor for 11gR2 in Windows
The installation was success
But there is some perl script in the c:\"Program Files"\oracrf\install\crfinst.pl i have to run it
I try to run it as follow
C:\Grid_home\perl\bin\perl -Ic:\grid_home\perl\lib -Ic:\"Program Files"\oracrf\install\ c:\"Program Files"\oracrf\install\crfinst.pl -f ---> Not success " Invalid argument"
I thing the problem in the name "Program Files" bcz when i copy the folder and rename it ,it run but give me other problem i thing i have to run it from same Location "Program File"
but how??
Thanks in advanceit was unable to acces the file crfinst.pl
had better use/try like this c:\"Program Files\oracrf\install\crfinst.pl"
instead of "program files" use double quotes until the filename it will access
try it. -
Outlook 2007 does not connect to exchange at computer startup
Hi all :)
Here's the situation we're encountring: we are using exchange 2010 with outlook 2007 clients. The issue is that at the startup of the computer, outlook does not connect to exchange (it opens up but it marks that it's not connected to exchange). After trying
a few times it connects and stays stable (if I close outlook and I open it again, it connects normally).
This suggests that there's may be a DNS problem: The client is having an issue resolving the name, but once it does and the IP of exchange is available in the cache, outlook doesn't face any issues.
So I ran some nslookup commands and I noticed the following:
when I try to resolve the name of exchange, the request times out twice before providing the answer.
This issue occurs only for forward lookups (when I try to resolve the same IP for the hostname, there's no timeout)
I also noticed that this issue only occurs when I run nslookup from the client machines (no timeout when I run it from exchange for instance).
Any ideas about what the problem might be? Could it be something else other than DNS?
Thank you all for your help.Hi all,
The problem seems not to be related to DNS. Our exchange 2010 organization was actually migrated from a 2007 one. Since then we noticed this issue of outlook taking too much time to connect and sometimes disconnects. I was messing around into adsiedit and
I noticed that a decomissioned Mailbox Server from our old exchange 2007 organization still exists among the new exchange 2010 objects.
To further look into it, I ran best practise analyser, the result (to my surprise) was that exchange is still trying to contact the old exchange 2007 server.
I ran some network trafic captures with Network Monitor, but I was not very successful interpreting anything.
I uploaded the .cap files with the best practise analyser report and a print screen of the old server into adsiedit objects. I hope you'll be able to help with it.
I took the network captures on the two CAS Servers (configured in a CAS array) and on a client machine. The IP addresses are as follow:
client 192.168.0.47
Domain Controller1 192.168.1.205
Domain Controller2 192.168.1.213
CAS1 192.168.2.216
CAS2 192.168.2.217
CAS Array 192.168.2.218
Download Link: https://onedrive.live.com/redir?resid=9360346C01880F58%21935
Thanks, -
My adobe Flash player does not connect on my Laptop HP Windows 7.
My Adobe Flash 11 Player on my laptop HP Windows 7 does not connect. (or cannot be found even though it is downloaded in the programs
What means "not connect" or "cannot be found"? Do you get any messages?
You write "downloaded", but did you also install it?
What is your browser? If IE see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? HelpContact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list. -
When I plug in my iPhone, it connects and begins to charge, then asks me to "trust" the computer. When I select "trust", rather than connecting to iTunes, my phone gets disconnected and then it reconnects again and continues to charge but does not connect to iTunes... I have tried restarting both my computer and my phone, I have tried uninstalling and reinstalling iTunes and I've also tried connecting my phone with different USB cables and connecting them into different USB ports... Still nothing is working.
That's how Apple set it up on the Mac.
There is a free application called iExplorer for Mac that allows you to view and copy files from your iPhone.
Hope this helps. -
iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?
I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon. -
Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.
Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon, -
I have a different Apple id on my PowerBook from that on my iMac and iPad. Photo Stream does not connect to my Powerbook. How do I change the Apple id in iCloud on my PowerBook? Will this link all 3 machines to PhotoStream?
You can't simply change the details.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button) -
How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???
Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
More troubleshooting can be found here:
iOS: Troubleshooting Wi-Fi networks and connections -
I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback -
Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service" almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
Thanks
James
Thanks
JamesSame problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(
Maybe you are looking for
-
Can you have two apple ID's and iTunes accounts on 1 home computer?
Can you have two apple ID's and iTunes accounts on 1 home computer?
-
Creative MP3 player plays songs alphabetically instead of in track order
I use a Creative Nomad Zen 20GB USB 2.0 MP3 player with iTunes 7. Lately, songs listed in the correct track order on a given album in iTunes show up listed and get played in alphabetical order when copied to the Zen. Any way in iTunes around this? I'
-
Adding one function to a existing package
i want to add one function to an existing packgage . How can i do this?
-
To call subscreen in ME47 before item overview screen appears
Hi, Once enter is pressed in ME47 after giving RFQ number, I need to call a custom screen before the item overview screen shown. Kindly help me to do this. Thanks.
-
Hi all, We have already implemented ECC 6.0 in a manufacturing project based industry. Now customer wants to track production order related changes. So we want to implement OCM. Can anyboby please tell the detaild steps for implementing the OCM. As p