Cluster installation failed:OCR files are not shared across all nodes

Hi gurus,
I'm trying to install RAC 10g using vmware following hunter document to install oracle 10g Rac.
I'm using centos 4.6 ,I'm now stuck on installing cluster which shows error OCR file are not shared across all nodes.
Please advice

Review the Release notes, there is a bug and a fix since CRS fails on the last node.
This bug is for EL 5, but pretty match what I've found on the log files
I'm also in EL 4.6, x64 in my case.. haven't tried the fix due lack of time.
Provide log files from CRS_HOME/logs

Similar Messages

EAR file is not deployed on all nodes when using SDM/Visual admin

Hi
We have a High availability portal landscape with multiple App Servers. When we deploy our custom applications (.EAR) using either SDM or Visual Administrator the file always deploys only onto the Central Instance and the end user some times sees blank screen becoz the load balancer routs the request to some other node (non Central Instance).
Any helpful answer will be awarded with points !!
Thanks
Lakshmi

Hi Lakshmi,
Restarting the SAP System should synchronize the components among the application servers.
You can also check if any of the components need to be updated by going to the deployment overview @ System Administation ->Support -> Support Desk-> Portal Runtime -> Deployment Overview
This link might be of help.
http://help.sap.com/saphelp_nw70/helpdata/en/f7/71b842b714b211e10000000a155106/frameset.htm
Regards,
Abhishek

Cluster installation failed

Hello all,
I am trying to install cluster software on VMware with the help of OTN document.
environment:
os: OEL 4
vmware:1.0.4
ora_crs : 10.2.0.1
i got error at the time of OCR file settings error is * the location /ocfs/clusterware/ocr entered for the oracle cluster registry (OCR) is not shared across all the nodes in the cluster. specify a shared raw partition or cluster file system file that is visible by the same name on all nodes of the cluster*
can anyone help me on this issue

Hello,
Please note that to install 10g clusterware, you need to have shared storage which should be visible on all nodes. Since you are installing on VMware, i would suggest to go to oracle-base.com site where it's mentioned in step by step procedure.
On VMware, you need to add hardware and create a new vitual disk and then clone that vmware configuration to create another VMware server.
Thanks,
Keyur

My lightroom 4 will not import my files from my compact flash card . It has been working for years with out fail but now there is no import previews and it says the files are not recognized by raw format support in LR

I have lightroom 4 I've had it for years and it has imported my raw files from my CF card without issue . Now when I plug in my CF card to import new files it says import operations not performed and there are no image previews . When I continue by hitting "import" I get a pop up window that states "the files are not recognized by raw format support in Light Room"

Don't feel too bad. If the D4S has as many menus and custom functions as my Canon 5D Mark iii its easy to get messed up.
If you downloaded from the link I gave you it will be Lr 5.4. The link was just to show you when the D4S was supported. The newest version is 5.7.1 and can be downloaded here. Don't know your OS so you will have to pick Windows or Mac. Product updates
On my Mac I just run the downloaded installer program (its a full version and not an small update) and it installs the new version and erases the old version. If you are on Windows you will have to get help from a windows person.

Sharing Folio - Source .indd files are not available for this article

when sharing a folio, and opening it up in indesign 5.5 all articles say:
"Source .indd files are not available for this article"
What is the point of sharing if you can't change articles and update them?

Because you’re not sharing the InDesign files, you’re sharing the folio.
Pretty similar to sharing a PDF but not the source files.
That said, I’m working on a project with someone else and everything sits in a Dropbox folder. Only I can update the folios but my partner has access to the InDesign files.
Bob

MS Office 2007 files are not being indexed (Failed to Index) in oracle

Oracle is not able to index MS Office 2007 files who are having extensions like *.docx, *.pptx, *.xlsx. I googled and found that its a bug in oracle. Have they released the fixes for it.
Request to please help me in this regard

user10933671 wrote:
There is no particular error it shows. The files are not getting indexed. In our application it says currently *.docx files are not index. My Oracle client is of version 10.2.0.
Since am really new to this, can you please tell me where i can find Metalink note 732823 as am not a paid customer.
That would be a problem. Access to patches (and MetaLink) are part of what you pay for when you buy a support contract.
Plz help me in this regard
Thanks in advance
Edited by: user10933671 on Apr 15, 2009 5:53 AM

Files are not getting updated in sharepoint 2013 because of office upload center error

Dear Team,
I am getting upload failed/upload error in Office Upload Center.
Scenario: I opened excel(version is 2013) file from sharepoint 2013 application and closed and after updating. Later when I opened the file I got error like "UPLOAD FAILED We are sorry this didn't work. Try saving again later and if that still doesn't
work, click save a copy."
I found the error is because file is getting upload failed / upload error in microsoft office upload center2013.
Please let me know if anyone know the solution for my issues
Thanks in Advance
Girish

Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Error: JAR-Ressources in JNLP-File are not signed from the same Certificate

I have two handfull jars, all signed in batch with the same
Certificate. When i start my App with Webstart it tells me:
Your JAR-Ressources in JNLP-File are not signed from the same Certificate.
"JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiert"
Well im shure that i signed all my jars with the same Certificate.
What can i do to solve this problem ???

I get the same error.
Strangely exactly every second time it works and every second time I execute the JNLP I get the following error:
network: Cache-Eintrag nicht gefunden [url: http://localhost:8080/fibo/lib/js_15R41.jar, Version: null]
network: Verbindung von socket://127.0.0.1:3621 mit Proxy=DIRECT wird hergestellt
#### Java Web Start Error:
#### JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiertCan this have something to do with browser caching? So that every 2nd time it tries to access the cache, fails. And than ignores the cache and works?
Any ideas?
Cheers,
Rio

Changes made in book file are not reflected in RH when book is updated

I'm using RH7 in TCS1. (I know, I know, everybody else is on RH8 in TCS2). I've added a book file by reference to my project. Then I made a few changes to titles in my FM book, then updated my project, but none of the changes have been made in RH.
Any ideas?

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Log Files are not shipping to standby.

Hi,
I am getting the below error. My log files are not getting shipped from primary to standby. Below is the error msg from alert log file. Help needed.
Thu Jan 10 17:27:17 2013
Error 1031 received logging on to the standby
Errors in file d:\app\sesa241915\diag\rdbms\orcl\orcl\trace\orcl_arc2_2944.trc:
ORA-01031: insufficient privileges
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
Thanks in advance.

Please find the content of trace file.
*** 2013-01-11 10:16:41.389
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:16:41.404 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:16:41.404 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:16:41.420 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:16:41.420 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:17:41.482
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:17:41.795 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:17:41.795 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:17:41.795 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:17:41.795 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:18:41.857
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:18:42.154 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:18:42.154 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:18:42.154 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:18:42.154 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:19:42.185
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:19:42.467 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:19:42.467 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:19:42.467 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:19:42.467 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:20:42.545
Redo shipping client performing standby login
*** 2013-01-11 10:20:42.639
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:20:42.810 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:20:42.810 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:20:42.810 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:20:42.810 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:21:42.889
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:21:43.217 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:21:43.217 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:21:43.217 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:21:43.217 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:22:43.295
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:22:43.639 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:22:43.639 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:22:43.639 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:22:43.639 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:23:43.701
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:23:44.045 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:23:44.045 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:23:44.045 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:23:44.045 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:24:44.123
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:24:44.451 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:24:44.451 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:24:44.451 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:24:44.451 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:25:44.514
Redo shipping client performing standby login
*** 2013-01-11 10:25:44.639
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:25:44.951 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:25:44.951 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:25:44.951 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:25:44.951 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:26:45.014
Redo shipping client performing standby login
*** 2013-01-11 10:26:45.170
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:26:45.373 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:26:45.373 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:26:45.389 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:26:45.389 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:27:45.435
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
*** 2013-01-11 10:27:45.779
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:27:45.951 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:27:45.951 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:27:45.967 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:27:45.967 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:28:46.029
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
*** 2013-01-11 10:28:46.326
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:28:46.435 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:28:46.435 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:28:46.435 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:28:46.435 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:29:46.482
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:29:46.889 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:29:46.889 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:29:46.904
*** 2013-01-11 10:29:46.904 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:29:46.904 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
Redo shipping client performing standby login
*** 2013-01-11 10:30:47.140
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:30:47.297 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:30:47.297 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:30:47.312 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:30:47.312 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:31:47.378
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:31:47.691 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:31:47.691 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:31:47.691 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:31:47.691 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:32:47.772
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:32:48.069 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:32:48.069 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:32:48.069 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:32:48.069 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
*** 2013-01-11 10:33:48.135
Redo shipping client performing standby login
*** 2013-01-11 10:34:09.261
OCIServerAttach failed -1
.. Detailed OCI error val is 12170 and errmsg is 'ORA-12170: TNS:Connect timeout occurred
*** 2013-01-11 10:34:45.873
OCIServerAttach failed -1
.. Detailed OCI error val is 12170 and errmsg is 'ORA-12170: TNS:Connect timeout occurred
*** 2013-01-11 10:35:06.984
OCIServerAttach failed -1
.. Detailed OCI error val is 12170 and errmsg is 'ORA-12170: TNS:Connect timeout occurred
*** 2013-01-11 10:35:06.984 4132 krsh.c
Error 12170 received logging on to the standby
*** 2013-01-11 10:35:06.984 869 krsu.c
Error 12170 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 12170 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-12170: TNS:Connect timeout occurred
*** 2013-01-11 10:35:06.999 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 12170.
*** 2013-01-11 10:35:06.999 2747 krsi.c
krsi_dst_fail: dest:2 err:12170 force:0 blast:1
*** 2013-01-11 10:36:07.063
Redo shipping client performing standby login
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1017 and errmsg is 'ORA-01017: invalid username/password; logon denied
OCISessionBegin failed. Error -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2013-01-11 10:36:07.267 4132 krsh.c
Error 1031 received logging on to the standby
*** 2013-01-11 10:36:07.267 869 krsu.c
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'orcl'
ORA-01031: insufficient privileges
*** 2013-01-11 10:36:07.267 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'orcl'. Error is 1031.
*** 2013-01-11 10:36:07.267 2747 krsi.c
krsi_dst_fail: dest:2 err:1031 force:0 blast:1
2. Please find the query results.
From Primary:
SQL> set lines 200
SQL> set numwidth 15
SQL> column ID format 99
SQL> column "SRLs" format 99
SQL> column active format 99
SQL> col type format a4
SQL> select ds.dest_id id
2 , ad.status
3 , ds.database_mode db_mode
4 , ad.archiver type
5 , ds.recovery_mode
6 , ds.protection_mode
7 , ds.standby_logfile_count "SRLs"
8 , ds.standby_logfile_active active
9 , ds.archived_seq#
10 from v$archive_dest_status ds
11 , v$archive_dest ad
12 where ds.dest_id = ad.dest_id
13 and ad.status != 'INACTIVE'
14 order by
15 ds.dest_id
16 /
ID STATUS DB_MODE TYPE RECOVERY_MODE PROTECTION_MODE SRLs ACTIVE ARCHIVED_SEQ#
1 VALID OPEN ARCH IDLE MAXIMUM PERFORMANCE 0 0 72
2 ERROR UNKNOWN LGWR IDLE MAXIMUM PERFORMANCE 0 0 0
From Standby:
SQL> set lines 200
SQL> set numwidth 15
SQL> column ID format 99
SQL> column "SRLs" format 99
SQL> column active format 99
SQL> col type format a4
SQL> select ds.dest_id id
2 , ad.status
3 , ds.database_mode db_mode
4 , ad.archiver type
5 , ds.recovery_mode
6 , ds.protection_mode
7 , ds.standby_logfile_count "SRLs"
8 , ds.standby_logfile_active active
9 , ds.archived_seq#
10 from v$archive_dest_status ds
11 , v$archive_dest ad
12 where ds.dest_id = ad.dest_id
13 and ad.status != 'INACTIVE'
14 order by
15 ds.dest_id
16 /
ID STATUS DB_MODE TYPE RECOVERY_MODE PROTECTION_MODE SRLs ACTIVE ARCHIVED_SEQ#
1 VALID OPEN ARCH IDLE MAXIMUM PERFORMANCE 0 0 72
2 ERROR UNKNOWN LGWR IDLE MAXIMUM PERFORMANCE 0 0 0
Regards
Srinivasan R

Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Images and .properties(bunldes) files are not being found from my JSPs

Hi,
I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
Here is my directory structure.
public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
--->enterprise -->images -->knowldege.jpg
--->BusinessEntity-->BEAdd.jsp
in my jsp bundle(.properties)file is accessed like this:-
<i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
in my jsp images accessed like this:-
src="/enterprise/images/knowldege.jpg".
In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
please let me know where i might did wrong
thanks in advance
srinivas

Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
server.xml :-
<?xml version="1.0"?>
<!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
<application-server application-directory="../applications"
deployment-directory="../application-deployments"
>
     <library path="../tools.jar" />
     <rmi-config path="./rmi.xml" />
     <jms-config path="./jms.xml" />
     <log>
          <file path="../log/server.log" />
     </log>
     <transaction-config timeout="30000" />
     <global-application name="default" path="application.xml" />
     <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
     <global-web-app-config path="global-web-application.xml" />
     <web-site path="./default-web-site.xml" />
     <cluster id="-1640090707" />
</application-server>
default-web-site.xml:-
<?xml version="1.0"?>
<!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
<web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
     <default-web-app application="nalluri" name="Commonwar" />
     <access-log path="../log/default-web-access.log" />
</web-site>
thanks in advance
wating for reply
srinivas

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"

When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help me

Please send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya

Cluster installation failed:OCR files are not shared across all nodes

Similar Messages

Maybe you are looking for