Cluster Network name resource could not be updated in domain

Hi,
I have the following error and need clarification on the below solution in bold:
Event Id 1206 -
The computer object associated with the cluster network name resource 'Cluster Name' could not be updated in domain 'xxxxx.xxxx'. The error code was 'Password change'. The cluster identity 'ClusterGroup1$' may lack permissions required to update the object.
1 - Move CNO back to the Computers Container
2- Give the Cluster Node Computer Accounts Change Password permission on the CNO
3 - Take the Cluster Name Resource offline
4 - Repair Cluster Name Resource
5 - Bring Cluster Name Resource back online
Firstly, is there any implication?
Secondly if ClusterGroup1$ is my CNO (Cluster Name Object) then is my
cluster node computer account the server nodes in the cluster? E.g. ClusterGroup1$ is the cluster, the nodes are hyperv01 and hyperv02, do I add hyperv01 and hyperv02 to clustergroup1 -- properties -- security?
Thank you.

Hi SPD IT,
If you have pre-stage your cluster object to a specific OU, you needn’t move them to default computer OU, with your current error information it most possible caused by the
lack permission of cluster nodes or some unless GPO applied to cluster nodes, please exclude the cluster from any GPO, then test this issue.
If it does not work please follow this repair action then monitor this issue:
1. Open Failover Cluster manager
2. Select Clustername
3. Under Cluster Core Resources right click on Cluster Name and select Take offline
4. Right click on Cluster Name and select repair.
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Cluster network name resource error 1196

    I have a two-node Hyper-V 2012 Core Server cluster. Initially, the cluster was working fine and I was able to do live migrations with no problem. I first realized that something had gone wrong when I was attempting to move a VM's storage to the Cluster Disk.
    When I right click on the VM and select Move > Virtual Machine Storage, the bottom left area of the "move storage" screen says "Loading..." forever and never displays the cluster storage. This happened once before and I was able to correct
    the issue by taking the Server Name resource offline and doing More Actions > Repair. However, if I try a repair now I receive the following error messages:
    "There was an error repairing the active directory object for 'Cluster Name'. Error Code: 0x800713b8. The cluster request is not valid for this object". 
    I have verified that the cluster name Active Directory object (CCSDCluster) still exists and each node as well as itself has full permissions to the object. What I am not certain of is whether the object is still in the same Organizational Unit as it was
    originally. After the failed repair attempt, I am able to bring the Server Name resource back online successfully.
    In addition, I am continually receiving cluster event errors indicating the following:
    "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid. Ensure that the network adapters associated with dependent IP address resources are configured
    with at least one accessible DNS server." 
    Each of the two nodes has multiple NICs configured. One for management, one for guest OSs (Hyper-V virtual switch is configured to use this NIC and not allow management OS access), and two for iSCSI (for redundancy and multi-path). Live migration is set
    to only use the management NICs. The management NIC on both nodes is configured with valid DNS servers. The CCSDCluster DNS entry has full permissions for both nodes and itself.
    Any suggestions on what to try would be greatly appreciated. Thank you!

    Could my issues be related to a problematic network configuration? Please see the ipconfig below from one of my Hyper-V host servers.
    Ethernet adapter Ethernet 8 = iSCSI
    Ethernet adapter Ethernet 6 = iSCSI
    Ethernet adapter Ethernet 2 = Management interface
             10.1.3.19 = Management IP address, 10.1.3.3 = IP address of Cluster Name Object
    Tunnel adapter Local Area Connection *11 = ?? Not sure what this one is
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : CCSDVM01
       Primary Dns Suffix  . . . . . . . : clairton.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : clairton.local
    Ethernet adapter Ethernet 9:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC552SFP Dual Port 10GbE Server Adapter #4
       Physical Address. . . . . . . . . : 28-92-4A-AF-46-34
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Ethernet 8:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC552SFP Dual Port 10GbE Server Adapter #3
       Physical Address. . . . . . . . . : 28-92-4A-AF-61-68
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 172.16.1.12(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 172.16.1.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Ethernet 7:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC552SFP Dual Port 10GbE Server Adapter #2
       Physical Address. . . . . . . . . : 28-92-4A-AF-61-6C
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Ethernet 6:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC552SFP Dual Port 10GbE Server Adapter
       Physical Address. . . . . . . . . : 28-92-4A-AF-46-30
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 172.16.1.11(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 172.16.1.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Ethernet 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #55
       Physical Address. . . . . . . . . : E4-11-5B-B9-3A-9C
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Ethernet 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #58
       Physical Address. . . . . . . . . : E4-11-5B-B9-3A-A2
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.1.3.19(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       IPv4 Address. . . . . . . . . . . : 10.1.3.3(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.1.3.100
       DNS Servers . . . . . . . . . . . : 10.1.3.10
                                           10.1.3.39
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter Local Area Connection* 11:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft Failover Cluster Virtual Adapter
       Physical Address. . . . . . . . . : 02-AD-4B-6D-A9-FB
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 169.254.2.92(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       NetBIOS over Tcpip. . . . . . . . : Enabled

  • Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid.

    I'm stuck here trying to figure this error out.  
    2003 domain, 2012 hyper v core 3 nodes.  (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
    In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason:  The handle is invalid."
    I restarted the host node that was listed in having the error then another node starts showing the errors.
    I tried to follow this site:  http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
    Then this error shows up when doing the repair:  there was an error repairing the active directory object for 'Cluster Name'
    I looked at our domain controller and noticed I don't have access to local users and groups.  I can access our other hvclust2008 (both clusters are same version 2012).
    <image here>
    I came upon this thread:  http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
    Now, I'm stuck on adding a managed service account (mas).  I'm not sure if I'm way off track to fix this.  Any advice?  Thanks in advance!
    <image here>

    Thanks Elton,
    I restarted 3 hosts after applying the hotfix.  Then I did the steps below and got stuck on step 5.  That is when I get the error (image above).  There
    was an error repairing the active directory object for 'Cluster Name'.  For more data, see 'Information Details'.
    To reset the password on the affected name resource, perform the following steps:
    From Failover Cluster Manager, locate the name resource.
    Right-click on the resource, and click Properties.
    On the Policies tab, select If resource fails, do not restart, and then click OK.
    Right-click on the resource, click More Actions, and then click Simulate Failure.
    When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
    After the name resource is online, right-click on the resource, and then click Properties.
    On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
    Thanks

  • Network Name Resource Availability - failover cluster error 1196 on Hyper-V 2012 R2 nodes

    Hello,
    We're getting this error in our even logs of our four node failover cluster, we tried deleting Host A record in DNS management, that did nothing.
    Failover cluster event: 1196
    "Cluster network name resource 'CAUCrgt8' failed registration of one or more associated DNS name(s) for the following reason: This operation returned because the timeout period expired.
    Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server."
    And this resource http://technet.microsoft.com/en-us/library/cc773529%28v=WS.10%29.aspx did not help in solving this.
    Do you guys have any other suggestions we could try to resolve this error?

    Hi Jonas,
    Please offer us which platform server you are using, such as if you are using server 2012 please refer the following update first.
    Recommended hotfixes and updates for Windows Server 2012-based Failover Clusters - http://support.microsoft.com/kb/2784261
    If the update not work please ppply Full Control permissions for the Cluster Name Resources in the DNS console.
    More detail information please refer the following article:
    Windows Server 2008 Troubleshooting: Event ID 1196 — Microsoft-Windows-FailoverClustering - http://social.technet.microsoft.com/wiki/contents/articles/windows-server-2008-troubleshooting-event-id-1196-microsoft-windows-failoverclustering.aspx
    DNS Registration with the Network Name Resource -
    http://blogs.msdn.com/b/clustering/archive/2009/07/17/9836756.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The cluster network name is not online

    Our cluster is a four node, Windows Server 2012 failover cluster running Hyper-V role only.  Today it starts throwing the error 'The cluster network name is not online'.  The IP is online (and all the VMs are running) but migrations fail and any
    scripts that rely on the name fail.  Attempting a More Actions | Repair results in 'The action 'Repair' did not complete.  Error code 0x80005000'
    The AD object for the cluster still exists.  We do not have a disjoint namespace.
    I am at a loss and hoping for some insight from the forum.
    Thanks

    Hi BlakeDuffey,
    It seems like the computer object registry keys missing, please first try to runn gpupdate /force command on all nodes and repair again, if it not work please refer the following
    article to repair the object registry key..
    The related article:
    Cluster network name resource 'Cluster Name' cannot be brought online, Unable to get Computer Object using GUID.
    http://blogs.technet.com/b/csstwplatform/archive/2010/10/15/cluster-network-name-resource-cluster-name-cannot-be-brought-online-unable-to-get-computer-object-using-guid.aspx
    Windows Server 2008 R2: Failover Clustering Troubleshooting Scenarios
    https://technet.microsoft.com/en-us/magazine/hh289314.aspx
    How to Troubleshoot Create Cluster failures in Windows Server 2012
    http://blogs.msdn.com/b/clustering/archive/2012/05/07/10301709.aspx
    http://blogs.technet.com/b/askcore/archive/2012/09/25/cno-blog-series-increasing-awareness-around-the-cluster-name-object-cno.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

    When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

  • The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

    Hi,
    I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
    I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
    Error when sharing file system export (share) saploc : The cluster resource could not be found
    I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
    Can anyone please let me know where am I going wrong ?
    NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
    Regards,
    Varadharajan M

    Yes Krishna,
    I've not created any shared folders manually and I've used the "Use domain of current user" option.
    Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
    <SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
    Regards,
    Varadharajan M

  • The cluster resource could not be brought online by the resource monitor.

    I'm installing Exchange 2007 CCR at a set of Windows server 2008 Virtual Machines.
    When I refer the doc to Configure the Node and File Share Majority Quorum, at the step 3 - 
    Bring the new File Share Witness resource online by running the following command:
    Cluster.exe res "File Share Witness (UNCPath)" /online
    I got the following error:
    System error 5018 has occurred (0x0000139a).
    The cluster resource could not be brought online by the resource monitor.
    How could I successfully Configure the Node and File Share Majority Quorum?

    Your link brings me back to this thread.  Not sure why, as I was able to find the article you reference with this link: 
    http://technet.microsoft.com/en-us/library/bb676490(v=EXCHG.80).aspx
    To ensure this works, you need to make sure the Exchange Servers group is in the Administrators group on the server hosting your FSW.
    FYI, Microsoft suggests that the FSW be hosted on a hub server.  This simplifies management, since the Exchange administrators will already be able to manage the server the FSW is hosted on, and all permissions are already in place for the messaging
    system.

  • Does anyone have corrective advice for me to follow? In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message: The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1). Thanks, A

    Hi everyone
    Does anyone have corrective advice for me to follow please?
    In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message:
    The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1).
    Thanks,
    tooborac1

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • Failover Cluster Network Name Failed and Can't be Repaired

    I have an issue that seem to be a different problem than any others have encountered.
    I've scoured everything I can find and nothing has fixed my problem.
    The problem starts with the common problem of the cluster network name failing on my 2 node server 2012 file server cluster.  The computer object was still in AD and appeared to be fine so it was not the common problem of the object
    getting deleted somehow.  At the time, there was no other object with that name in the recycling bin, so I don't think it was mistakenly deleted and quickly recreated to cover any tracks, so to speak.
    Following one guide, I tried to find the registry key that corresponded with the GUID of the object, but neither node in the cluster had it in its registry (which may be part of the problem).
    Since it was in the failed state, I tried to do the repair on the object to no avail.
    We run a "locked down" DC environment so all computer objects have to be pre-provisioned.  They were all pre-provisioned successfully and successfully assigned during cluster creation.  The cluster was running with no issues for a month
    or so before this problem came up.
    When I do a repair on the object while taking diagnostic logs the following 4609 error appears:
    The action 'Repair' did not complete. - System.ApplicationException: An error occurred resetting the password for 'Cluster Name'. ---> System.ComponentModel.Win32Exception: Unknown error (0x80005000)
    There appears to be a corresponding 4771 error with a failure code 0x18 that comes from the security log of the DC that states there was a Kerberos pre-authentication failure for the cluster network name object (Domain\Clustername$)
    I believe this is what is causing the repair failure.  All the information I found related to security error 4771 was either a bad credentials given for a user account or the fix was to reconnect the computer to the domain.  I can't seem to find
    a way to do this with the cluster network name.  If there's a way please let me know.
    I've tried a number of things, like resetting the object, disabling it, deleting and creating a new object with the same name, deleting that new object and recovering the original, etc...
    Can anyone shed some light on what is going on and hopefully how to fix it other than rebuilding the cluster?  I'm quite close to just tearing it down and building it back up but am hesitant because this cluster in currently in production...
    Any help would be appreciated

    Hi,
    I don’t find out the similar issue with yours, base on my experience, the 4096 error
     often caused by the CSV disk issue, and the 0x80005000 error some time caused by the repetitive computer object in OU. Please check the above related part or run the validate test then post the error information.
    Although I do have a CSV, there doesn't seem to be any problems with it and it was running just fine for a month or so before the problem started.  I double checked and there is no duplicate computer objects, maybe I don't understand what you mean by
    repetitive, could you explain further?
    The cluster validates successfully with a few warnings:
    Validating cluster resource Name: DT-FileCluster.
    This resource is marked with a state of 'Failed' instead of
    'Online'. This failed state indicates that the resource had a problem either
    coming online or had a failure while it was online. The event logs and cluster
    logs may have information that is helpful in identifying the cause of the
    failure.
    - This is because the cluster name is in the failed state
    Validating the service principal names for Name:
    DT-FileCluster.
    The network name Name: DT-FileCluster does not have a valid
    value for the read-only property 'ObjectGUID'. To validate the service principal
    name the read-only private property 'ObjectGuid' must have a valid value. To
    correct this issue make sure that the network name has been brought online at
    least once. If this does not correct this issue you will need to delete the
    network name and re-create it.
    - This is definitely related to the problem and the GUID probably got removed when we attempted a fix by resetting the object and trying the repair from the failover cluster manager.
    The user running validate, does not have permissions to create
    computer objects in the 'ad.unlv.edu' domain.
    - This is correct, we run a restricted domain.  I have a delegated OU that I can pre-provision accounts in.  The account was pro-provisioned successfully and was at one point setup and working just fine.
    There are no other errors nor warnings.

  • Collect metrics failed : requested resource could not be found (vSDatastore)

    Hello,
    I am working on Tidal Enterprise Orchestrator 2.3.0.441 (hotfix1 and 2, content update 1), part of CIAC starter edition.
    Scheduled Collect metrics failed in ‘vSphere Datastores Data Sync’ at the last step : ‘Export Service Item Data’.
    Failure appears in ‘NS API – Query SI’ :
    The remote server returned an error: (404) Not Found. <nsapi-error-response>Requested resource could not be found.</nsapi-error-response>
    The URL is http://XXX:8088/RequestCenter/nsapi/serviceitem/SivSDatastore/Name=Devo/datastore2
    The account is nsapiuser and of course the item Devo/datastore2 exists in the Portal. I did not change the workflow.
    Do you know what could be the issue ?
    Thank you very much.
    Cheers,
    Nicolas

    Probably you do not have all the proper permissions for the nsapi user.
    Are they a site admin and CPTA?
    do they belong to the Cloud Admin OU (as their home OU) and the Site admin OU?
    After doing that, bounce the CCP server.
    If you still have issues, use your support services contract and open a TAC case.
    -Shaun Roberts
    CIAC/CPO Support Team lead
    [email protected]

  • "The iPod ... could not be updated because it could not be found" on Mac?

    I just updated to the latest version of QuickTime and was notified that there was a new iPod update but when I try to update it I get the message:
    "The iPod "My Name's iPod" could not be updated because it could not be found."
    I tried to remove the iPod Software Update folder, but that didn't work.
    I also tried to restore the iPod too, but I got the same error message??
    I see documents for Windows on this error message about the firmware being corrup bug not for Macs.
    What's going on??

    Well, back again... a new iTunes and QuickTime update via Software Update and it got my iTunes in the same state again after the web installation. DOH! I reinstalled both QT and iTunes again to fix the issue again. I can't be the only one that this is happening to so just reiterate the fix works but that I'm beginning not to trust the Software Update versions of the installers for QT and iTunes. There IS a difference and it's a buggy result of not being able to find the iPod afterward. Next time I get the prompt to update I'm going to refuse and then download it from the website.

  • Software could not be updated because the firmware file was corrupt

    I just received my iPad yesterday and I saw there was a new update to the OS(from 3.2.1 to 3.2.2). I tried to install it and after downloading the 450 MB file it gave me the error "The iPod "ipod name" Could not be updated because the firmware file was corrupt", so I tried it again and again got hte same error; so I tried researching and saw several possible solutions, including re-installing iTunes, so I decided to try it on a different machine, same error. I don't want to keep downloading huge files, so I'm wondering if anyone knows some possible solutions? I've tried this on both a Windows XP and Windows 7 machine.

    Hi, I had the same problem: firmware was corrupted on the update. I managed to fix it by logging in to my administrator account and leting iTunes do a reset. I have no media or apps on that iTunes account so it was relatively straight forward. Once reset and update was complete I logged back into my user account and let my usual iTunes account reinstal all my media and apps.
    Be sure to backup your iPad before doing a reset.
    This may help; you may also like to contact iPad Support for assistance.

  • JMS Send Transaction Failing, due to resources could not be assigned

    I am trying to get a transaction of a JMS send to work where the origination of the send occurs in domain A and the message queue is hosted in domain B. I have been able to get this to work; however, this issue has shown up in recent tests. I haven't changed anything other than the version of the Oracle database client that is being used. I don't see any relationship between that and the persistent store.
    Both domains are hosted on the same computer and both domains are simple development domains. Trust is established between the domains using 'global trust'.
    I'm running Weblogic Server 10.3.4..
    I'm not sure how to get around this issue. I can't find any documentation...
    My suspicion is that there needs to be some special configuration for the transaction, since I'm using the default persistence store. The warnings seem to indicate the problem. The AdminServer is hosted on domain A and the AuditAdminServer on domain B...
    Any assistance will be greatly appreciated!
    Thanks in advance...
    Here is the stacktrace:
    <Apr 11, 2013 11:17:05 AM MDT> <Warning> <JTA> <BEA-110405> <Resource WLStore_audit_domain__WLS_AuditAdminServer was not assigned to any of these servers: AdminServer AuditAdminServer >
    <Apr 11, 2013 11:17:25 AM MDT> <Warning> <JTA> <BEA-110405> <Resource WLStore_audit_domain__WLS_AuditAdminServer was not assigned to any of these servers: AdminServer AuditAdminServer >
    <Apr 11, 2013 11:19:47 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Name=[EJB gov.va.med.datasharing.core.ServiceBusImpl.processInbound(java.lang.String,java.lang.Object)],Xid=BEA1-003FA101855115C0DB45(13340960),Status=Rolling Back. [Reason=javax.transaction.SystemException: Aborting prepare because the following resources could not be assigned: WLStore_audit_domain__WLS_AuditAdminServer],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=183,seconds left=22,XAServerResourceInfo[DefaultXADataSource_vhie_domain]=(ServerResourceInfo[DefaultXADataSource_vhie_domain]=(state=rolledback,assigned=AdminServer),xar=DefaultXADataSource,re-Registered = false),XAServerResourceInfo[WLStore_audit_domain__WLS_AuditAdminServer]=(ServerResourceInfo[WLStore_audit_domain__WLS_AuditAdminServer]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_vhie_domain_VhieFileStore]=(ServerResourceInfo[WLStore_vhie_domain_VhieFileStore]=(state=rolledback,assigned=AdminServer),xar=WLStore_vhie_domain_VhieFileStore1316539,re-Registered = false),SCInfo[vhie_domain+AdminServer]=(state=rolledback),SCInfo[audit_domain+AuditAdminServer]=(state=rolling-back),properties=({weblogic.transaction.name=[EJB gov.va.med.datasharing.core.ServiceBusImpl.processInbound(java.lang.String,java.lang.Object)]}),local properties=({weblogic.jdbc.jta.DefaultXADataSource=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=AdminServer+192.168.1.120:7001+vhie_domain+t3+, XAResources={WLStore_vhie_domain_VhieFileStore, SDSDataSource_vhie_domain, DefaultXADataSource_vhie_domain, eis/jms/WLSConnectionFactoryJNDIXA, WSATGatewayRM_AdminServer_vhie_domain},NonXAResources={})],CoordinatorURL=AdminServer+192.168.1.120:7001+vhie_domain+t3+): weblogic.transaction.RollbackException: Aborting prepare because the following resources could not be assigned: WLStore_audit_domain__WLS_AuditAdminServer
         at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1881)
         at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:345)
         at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
         at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:625)
         at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:49)
         at weblogic.ejb.container.internal.BaseRemoteObject.__WL_postInvokeTxRetry(BaseRemoteObject.java:444)
         at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:53)
         at gov.va.med.datasharing.core.ServiceBus_r6xnti_ServiceBusImpl.processInbound(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
         at $Proxy89.processInbound(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:317)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
         at $Proxy91.processInbound(Unknown Source)
         at gov.va.med.datasharing.web.ServiceBusDelegate.processInbound(ServiceBusDelegate.java:43)
         at gov.va.med.datasharing.web.adc.PatientServiceImpl.changeADCStatus(PatientServiceImpl.java:58)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.expression.spel.support.ReflectiveMethodExecutor.execute(ReflectiveMethodExecutor.java:69)
         at org.springframework.expression.spel.ast.MethodReference$MethodValueRef.getValue(MethodReference.java:97)
         at org.springframework.expression.spel.ast.CompoundExpression.getValueInternal(CompoundExpression.java:81)
         at org.springframework.expression.spel.ast.SpelNodeImpl.getTypedValue(SpelNodeImpl.java:102)
         at org.springframework.expression.spel.standard.SpelExpression.getValue(SpelExpression.java:98)
         at org.springframework.binding.expression.spel.SpringELExpression.getValue(SpringELExpression.java:84)
         at org.springframework.webflow.action.EvaluateAction.doExecute(EvaluateAction.java:75)
         at org.springframework.webflow.action.AbstractAction.execute(AbstractAction.java:188)
         at org.springframework.webflow.execution.AnnotatedAction.execute(AnnotatedAction.java:145)
         at org.springframework.webflow.execution.ActionExecutor.execute(ActionExecutor.java:51)
         at org.springframework.webflow.engine.support.ActionTransitionCriteria.test(ActionTransitionCriteria.java:82)
         at org.springframework.webflow.engine.support.TransitionCriteriaChain.test(TransitionCriteriaChain.java:71)
         at org.springframework.webflow.engine.Transition.canExecute(Transition.java:195)
         at org.springframework.webflow.engine.Transition.execute(Transition.java:211)
         at org.springframework.webflow.engine.impl.FlowExecutionImpl.execute(FlowExecutionImpl.java:393)
         at org.springframework.webflow.engine.impl.RequestControlContextImpl.execute(RequestControlContextImpl.java:214)
         at org.springframework.webflow.engine.TransitionableState.handleEvent(TransitionableState.java:119)
         at org.springframework.webflow.engine.Flow.handleEvent(Flow.java:555)
         at org.springframework.webflow.engine.impl.FlowExecutionImpl.handleEvent(FlowExecutionImpl.java:388)
         at org.springframework.webflow.engine.impl.RequestControlContextImpl.handleEvent(RequestControlContextImpl.java:210)
         at org.springframework.webflow.engine.ViewState.handleEvent(ViewState.java:232)
         at org.springframework.webflow.engine.ViewState.resume(ViewState.java:196)
         at org.springframework.webflow.engine.Flow.resume(Flow.java:545)
         at org.springframework.webflow.engine.impl.FlowExecutionImpl.resume(FlowExecutionImpl.java:258)
         at org.springframework.webflow.executor.FlowExecutorImpl.resumeExecution(FlowExecutorImpl.java:169)
         at org.springframework.webflow.mvc.servlet.FlowHandlerAdapter.handle(FlowHandlerAdapter.java:183)
         at org.springframework.webflow.mvc.servlet.FlowController.handleRequest(FlowController.java:174)
         at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:48)
         at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:925)
         at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:856)
         at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:915)
         at org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:822)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at org.springframework.web.servlet.FrameworkServlet.service(FrameworkServlet.java:796)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at org.springframework.orm.jpa.support.OpenEntityManagerInViewFilter.doFilterInternal(OpenEntityManagerInViewFilter.java:180)
         at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused by: javax.transaction.SystemException: Aborting prepare because the following resources could not be assigned: WLStore_audit_domain__WLS_AuditAdminServer
         at weblogic.transaction.internal.TransactionImpl.abort(TransactionImpl.java:1153)
         at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2200)
         at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:279)
         ... 77 more
    .>

    It turns out that those packages are, indeed, in extra.
    I didn't think to look there, since I assumed that everything needed by base would be in [core].
    I assumed wrong.

  • The type or namespace name 'SPSite' could not be found (are you missing a using directive or an assembly reference?)_

    I am creating a Winforms application. I need to upload and download a file from Sharepoint.
     I have added reference to Microsoft.Sharepoint.Client.
    Below is the code to upload file:
    using System.IO;
    using Microsoft.SharePoint;
    private void Button_Click_1(object sender, RoutedEventArgs e)
                String fileToUpload = @"C:\Test.txt";
                String sharePointSite = "https://myshapoint";
                String documentLibraryName = "Test";
                using (SPSite oSite = new SPSite(sharePointSite))
                    using (SPWeb oWeb = oSite.OpenWeb())
                        if (!System.IO.File.Exists(fileToUpload))
                            throw new FileNotFoundException("File not found.", fileToUpload);
                        SPFolder myLibrary = oWeb.Folders[documentLibraryName];
                        // Prepare to upload
                        Boolean replaceExistingFiles = true;
                        String fileName = System.IO.Path.GetFileName(fileToUpload);
                        FileStream fileStream = File.OpenRead(fileToUpload);
                        // Upload document
                        SPFile spfile = myLibrary.Files.Add(fileName, fileStream, replaceExistingFiles);
                        // Commit 
                        myLibrary.Update();
    But i get the error "The type or namespace name 'SPSite' could not be found (are you missing a using directive or an assembly reference?)"
    I am not sure what else I am supposed to do here.

    Hi,
    If you want to develop a WinForm application to be only used in SharePoint Server, we can use Server-Side Object Model(use Microsoft.Sharepoint.dll) to achieve it. 
    If you want to use the WinForm application to be used both in Server side and Client Side, I suggest you use .Net Client Object Model(use Microsoft.Sharepoint.Client.dll) to achieve it.
    Here are two links for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/c357e3c7-37e9-4ded-83aa-a57beae0b0e4/how-to-upload-download-files-to-sharepoint-2013?forum=sharepointdevelopment
    http://msdn.microsoft.com/en-us/library/ff798388.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

Maybe you are looking for