Cluster Node paused

Hi there
My Setup:
2 Cluster Nodes (HP DL380 G7 & HP DL380 Gen8)
HP P2000 G3 FC MSA (MPIO)
The Gen8 Cluster Node pauses after a few minutes, but stays online if the G7 is paused (no drain) My troubleshooting has led me to believe that there is a problem with the Cluster Shared Volume:
00001508.000010b4::2015/02/19-14:51:14.189 INFO  [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:cf2dec1d-ee88-4fb6-a86d-0c2d1aa888b4:Netbios
00000d1c.0000299c::2015/02/19-14:51:14.615 INFO  [API] s_ApiGetQuorumResource final status 0.
00000d1c.0000299c::2015/02/19-14:51:14.616 INFO  [RCM [RES] Virtual Machine VirtualMachine1 embedded failure notification, code=0 _isEmbeddedFailure=false _embeddedFailureAction=2
00001508.000010b4::2015/02/19-14:51:15.010 INFO  [RES] Network Name <Cluster Name>: Getting Read only private properties
00000d1c.00002294::2015/02/19-14:51:15.096 INFO  [API] s_ApiGetQuorumResource final status 0.
00000d1c.00002294::2015/02/19-14:51:15.121 INFO  [API] s_ApiGetQuorumResource final status 0.
000014a8.000024f4::2015/02/19-14:51:15.269 INFO  [RES] Physical Disk <Quorum>: VolumeIsNtfs: Volume
\\?\GLOBALROOT\Device\Harddisk1\ClusterPartition2\ has FS type NTFS
00000d1c.00002294::2015/02/19-14:51:15.343 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQ's DLL is not present on this node.  Attempting to find a good node...
00000d1c.00002294::2015/02/19-14:51:15.352 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQTriggers's DLL is not present on this node.  Attempting to find a good node...
000014a8.000024f4::2015/02/19-14:51:15.386 INFO  [RES] Physical Disk: HardDiskpQueryDiskFromStm: ClusterStmFindDisk returned device='\\?\mpio#disk&ven_hp&prod_p2000_g3_fc&rev_t250#1&7f6ac24&0&36304346463030314145374646423434393243353331303030#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
000014a8.000024f4::2015/02/19-14:51:15.386 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: GetVolumeInformation failed for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
000014a8.000024f4::2015/02/19-14:51:15.386 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: failed to get partition size for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
00000d1c.00001420::2015/02/19-14:51:15.847 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQ's DLL is not present on this node.  Attempting to find a good node...
00000d1c.00001420::2015/02/19-14:51:15.855 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQTriggers's DLL is not present on this node.  Attempting to find a good node...
000014a8.000024f4::2015/02/19-14:51:15.887 INFO  [RES] Physical Disk: HardDiskpQueryDiskFromStm: ClusterStmFindDisk returned device='\\?\mpio#disk&ven_hp&prod_p2000_g3_fc&rev_t250#1&7f6ac24&0&36304346463030314145374646423434393243353331303030#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
000014a8.000024f4::2015/02/19-14:51:15.888 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: GetVolumeInformation failed for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
000014a8.000024f4::2015/02/19-14:51:15.888 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: failed to get partition size for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
00000d1c.00001420::2015/02/19-14:51:15.928 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQ's DLL is not present on this node.  Attempting to find a good node...
00000d1c.00001420::2015/02/19-14:51:15.939 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQTriggers's DLL is not present on this node.  Attempting to find a good node...
000014a8.000024f4::2015/02/19-14:51:15.968 INFO  [RES] Physical Disk: HardDiskpQueryDiskFromStm: ClusterStmFindDisk returned device='\\?\mpio#disk&ven_hp&prod_p2000_g3_fc&rev_t250#1&7f6ac24&0&36304346463030314145374646423434393243353331303030#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
000014a8.000024f4::2015/02/19-14:51:15.969 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: GetVolumeInformation failed for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
000014a8.000024f4::2015/02/19-14:51:15.969 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: failed to get partition size for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
00000d1c.00001420::2015/02/19-14:51:16.005 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQ's DLL is not present on this node.  Attempting to find a good node...
00000d1c.00001420::2015/02/19-14:51:16.015 WARN  [RCM] ResourceTypeChaseTheOwnerLoop::DoCall: ResType MSMQTriggers's DLL is not present on this node.  Attempting to find a good node...
000014a8.000024f4::2015/02/19-14:51:16.059 INFO  [RES] Physical Disk: HardDiskpQueryDiskFromStm: ClusterStmFindDisk returned device='\\?\mpio#disk&ven_hp&prod_p2000_g3_fc&rev_t250#1&7f6ac24&0&36304346463030314145374646423434393243353331303030#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
000014a8.000024f4::2015/02/19-14:51:16.059 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: GetVolumeInformation failed for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
000014a8.000024f4::2015/02/19-14:51:16.059 ERR   [RES] Physical Disk: HardDiskpGetDiskInfo: failed to get partition size for
\\?\GLOBALROOT\Device\Harddisk3\ClusterPartition2\, status 3
00000d1c.00002568::2015/02/19-14:51:17.110 INFO  [GEM] Node 1: Deleting [2:395 , 2:396] (both included) as it has been ack'd by every node
00000d1c.0000299c::2015/02/19-14:51:17.444 INFO  [RCM [RES] Virtual Machine VirtualMachine2 embedded failure notification, code=0 _isEmbeddedFailure=false _embeddedFailureAction=2
00000d1c.0000299c::2015/02/19-14:51:18.103 INFO  [RCM] rcm::DrainMgr::PauseNodeNoDrain: [DrainMgr] PauseNodeNoDrain
00000d1c.0000299c::2015/02/19-14:51:18.103 INFO  [GUM] Node 1: Processing RequestLock 1:164
00000d1c.00002568::2015/02/19-14:51:18.104 INFO  [GUM] Node 1: Processing GrantLock to 1 (sent by 2 gumid: 1470)
00000d1c.0000299c::2015/02/19-14:51:18.104 INFO  [GUM] Node 1: executing request locally, gumId:1471, my action: /nsm/stateChange, # of updates: 1
00000d1c.00001420::2015/02/19-14:51:18.104 INFO  [DM] Starting replica transaction, paxos: 99:99:50133, smartPtr: HDL( c9b16cf1e0 ), internalPtr: HDL( c9b21
This issue has been bugging me for some time now. The Cluster is fully functional and works great until the node gets paused again. I've read somewhere that the MSMQ errors can be ignored, but can't find anything about the
HardDiskpGetDiskInfo: GetVolumeInformation failed messages. No errors in the san or the Server Event logs. Driver and Firmware are up to date. Any help would be greatly appreciated.
Best regards

Thank you for your replies.
First some information I left out in my original post. We're using Windows Server 2012 R2 Datacenter and are currently only hosting virtual machines on the cluster.
I did some testing over the weekend, including a firmware update on the san and cluster validation. 
The problem doesn't seem to be related to backup. We use Microsoft DPM to make a full express backup once every day, the getvolumeinformation Failed error gets logged periodically every half an hour.
Excerpts from the validation report:
Validate Disk Failover
Description: Validate that a disk can fail over successfully with
data intact.
Start: 21.02.2015 18:02:17.
Node Node2 holds the SCSI PR on Test Disk 3
and brought the disk online, but failed in its attempt to write file data to
partition table entry 1. The disk structure is corrupted and
unreadable.
Stop: 21.02.2015 18:02:37.
Node Node1 holds the SCSI PR on Test Disk 3
and brought the disk online, but failed in its attempt to write file data to
partition table entry 1. The disk structure is corrupted and unreadable.
Validate File System
Description: Validate that the file system on disks in shared
storage is supported by failover clusters and Cluster Shared Volumes (CSVs).
Failover cluster physical disk resources support NTFS, ReFS, FAT32, FAT, and
RAW. Only volumes formatted as NTFS or ReFS are accessible in disks added as
CSVs.
The test was canceled.
Validate Simultaneous Failover
Description: Validate that disks can fail over simultaneously with
data intact.
The test was canceled.
Validate Storage Spaces Persistent Reservation
Description: Validate that storage supports the SCSI-3 Persistent
Reservation commands needed by Storage Spaces to support clustering.
Start: 21.02.2015 18:01:00.
Verifying there are no Persistent Reservations, or Registration
keys, on Test Disk 3 from node Node1. Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0x30000000a for Test
Disk 3 from node Node1.
Issuing Persistent Reservation RESERVE on Test Disk 3 from node 
Node1 using key 0x30000000a.
Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0x3000100aa for Test
Disk 3 from node Node2.
Issuing Persistent Reservation REGISTER using RESERVATION KEY
0x30000000a SERVICE ACTION RESERVATION KEY 0x30000000b for Test Disk 3 from node 
Node1 to change the registered key while holding the
reservation for the disk.
Verifying there are no Persistent Reservations, or Registration
keys, on Test Disk 2 from node Node1.
Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0x20000000a for Test
Disk 2 from node Node1.
Issuing Persistent Reservation RESERVE on Test Disk 2 from node 
Node1 using key 0x20000000a.
Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0x2000100aa for Test
Disk 2 from node Node2.
Issuing Persistent Reservation REGISTER using RESERVATION KEY
0x20000000a SERVICE ACTION RESERVATION KEY 0x20000000b for Test Disk 2 from node 
Node1 to change the registered key while holding the
reservation for the disk.
Verifying there are no Persistent Reservations, or Registration
keys, on Test Disk 0 from node Node1.
Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0xa for Test Disk 0
from node Node1.
Issuing Persistent Reservation RESERVE on Test Disk 0 from node 
Node1 using key 0xa.
Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0x100aa for Test Disk 0
from node Node2.
Issuing Persistent Reservation REGISTER using RESERVATION KEY
0xa SERVICE ACTION RESERVATION KEY 0xb for Test Disk 0 from node 
Node1 to change the registered key while holding the
reservation for the disk.
Verifying there are no Persistent Reservations, or Registration
keys, on Test Disk 1 from node Node1.
Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0x10000000a for Test
Disk 1 from node Node1.
Issuing Persistent Reservation RESERVE on Test Disk 1 from node 
Node1 using key 0x10000000a.
Issuing Persistent Reservation REGISTER AND IGNORE EXISTING KEY
using RESERVATION KEY 0x0 SERVICE ACTION RESERVATION KEY 0x1000100aa for Test
Disk 1 from node Node2.
Issuing Persistent Reservation REGISTER using RESERVATION KEY
0x10000000a SERVICE ACTION RESERVATION KEY 0x10000000b for Test Disk 1 from node 
Node1 to change the registered key while holding the
reservation for the disk.
Failure. Persistent Reservation not present on Test Disk 3 from
node Node1 after successful call to update reservation holder's
registration key 0x30000000b.
Failure. Persistent Reservation not present on Test Disk 1 from
node Node1 after successful call to update reservation holder's
registration key 0x10000000b.
Failure. Persistent Reservation not present on Test Disk 0 from
node Node1 after successful call to update reservation holder's
registration key 0xb.
Failure. Persistent Reservation not present on Test Disk 2 from
node Node1 after successful call to update reservation holder's
registration key 0x20000000b.
Test Disk 0 does not support SCSI-3 Persistent Reservations
commands needed by clustered storage pools that use the Storage Spaces
subsystem. Some storage devices require specific firmware versions or settings
to function properly with failover clusters. Contact your storage administrator
or storage vendor for help with configuring the storage to function properly
with failover clusters that use Storage Spaces.
Test Disk 1 does not support SCSI-3 Persistent Reservations
commands needed by clustered storage pools that use the Storage Spaces
subsystem. Some storage devices require specific firmware versions or settings
to function properly with failover clusters. Contact your storage administrator
or storage vendor for help with configuring the storage to function properly
with failover clusters that use Storage Spaces.
Test Disk 2 does not support SCSI-3 Persistent Reservations
commands needed by clustered storage pools that use the Storage Spaces
subsystem. Some storage devices require specific firmware versions or settings
to function properly with failover clusters. Contact your storage administrator
or storage vendor for help with configuring the storage to function properly
with failover clusters that use Storage Spaces.
Test Disk 3 does not support SCSI-3 Persistent Reservations
commands needed by clustered storage pools that use the Storage Spaces
subsystem. Some storage devices require specific firmware versions or settings
to function properly with failover clusters. Contact your storage administrator
or storage vendor for help with configuring the storage to function properly
with failover clusters that use Storage Spaces.
Stop: 21.02.2015 18:01:02
Thank you for your help.
David

Similar Messages

  • Event ID 1135 When Node Paused

    I have a three node Server 2012 cluster with Hyper-V running on the cluster. When I pause a server, and then restart it, I am getting Event ID 1135:
    Cluster node 'COTTONMILL' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate
    a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected
    such as hubs, switches, or bridges.
    and also Event ID 1177:
    The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. 
    Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected
    such as hubs, switches, or bridges.
    All of my virtual servers stay up though. 
    Quorum is set at NodeMajority with no witness.
    Should I be getting these errors when I pause one node to do maintenance and the other two nodes are running? Thanks.

    Hi,
    The 1135 event will be logged on all nodes in the Cluster except for the node that was removed. The reason for this event is because one of the nodes in the Cluster marked
    that node as down. It then notifies all of the other nodes of the event. When the nodes are notified, they discontinue and tear down their heartbeat connections to the downed node.
    And the 1177 event may cause by your restart, you can refer the following article for the more detail reason:
    Having a problem with nodes being removed from active Failover Cluster membership?
    http://blogs.technet.com/b/askcore/archive/2012/02/08/having-a-problem-with-nodes-being-removed-from-active-failover-cluster-membership.aspx
    Event ID 1177 — Quorum and Connectivity Needed for Quorum
    http://technet.microsoft.com/en-us/library/cc773498(v=ws.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SCVMM losing connection to cluster nodes

    Hey guys'n girls, I hope this is the right forum for this question. I already opened a ticket at MS support as well because it's impacting our production environment indirectly, but even after a week there's been no contact. Losing faith in MS support there
    The problem we're having is that scvmm is that a host enters the 'needs attention' state, with a winrm error 0x80338126. I guess it has something to do with the network or with Kerberos, and I've found some info on it, but I still haven't been able to solve
    it. Do you guys have any ideas?
    Problem summary:
    We are seeing an issue on our new hyper-v platform. The platform should have been in production last week, but this issue is delaying our project as we can't seem to get it stable.
    The problem we are experiencing is that SCVMM loses the connection to some of the Hyper-V nodes. Not one
     specific node. Last week it happened to two nodes, and today it happened to another node. I see issues with WinRM, and I expect something to do with kerberos. See the bottom of this post for background details and software versions.
    The host gets the status 'needs attention', and if you look at the status of the machine, WinRM gives an error. The error is:
    Error (2916)
    VMM is unable to complete the request. The connection to the agent cc1-hyp-10.domaincloud1.local was lost.
    WinRM: URL: [http://cc1-hyp-10.domaincloud1.local:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="WinRM"]
    Unknown error (0x80338126)
    Recommended Action
    Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with cc1-hyp-10.domaincloud1.local over WinRM by successfully
    running the following command:
     winrm id –r:cc1-hyp-10.domaincloud1.local
    This
     problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (http://support.microsoft.com/kb/982293)
    is installed on it.
    If the error persists, restart cc1-hyp-10.domaincloud1.local and then try the operation again. /nRefer to
    http://support.microsoft.com/kb/2742275 for more details.
    Doing a simple test from the VMM server to the problematic cluster node shows this error:
    PS C:\> hostname
    CC1-VMM-01
    PS C:\> winrm id -r:cc1-hyp-10.domaincloud1.local
    WSManFault
        Message = WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this
    computer. By default, the WinRM firewall exception for public profiles limits access to remote computers within the same local subnet.
    Error number:  -2144108250 0x80338126
    WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM
    firewall exception for public profiles limits access to remote computers within the same local subnet.
    I CAN connect from other hosts to this problematic cluster node:
    PS C:\> hostname
    CC1-HYP-16
    PS C:\> winrm id -r:cc1-hyp-10.domaincloud1.local
    IdentifyResponse
        ProtocolVersion =
    http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
        ProductVendor = Microsoft Corporation
        ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
        SecurityProfiles
            SecurityProfileName =
    http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos
    And I can connect from the vmm server to all other cluster nodes:
    PS C:\> hostname
    CC1-VMM-01
    PS C:\> winrm id -r:cc1-hyp-11.domaincloud1.local
    IdentifyResponse
        ProtocolVersion =
    http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
        ProductVendor = Microsoft Corporation
        ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
        SecurityProfiles
            SecurityProfileName =
    http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos
    So at this point only the test from the cc1-vmm-01 to cc1-hyp-10 seems to be problematic.
    I followed the steps in the page
    https://support.microsoft.com/kb/2742275 (which is referred to above). I tried the VMMCA, but it can't really get it working the way I want, or it seems to give outdated recommendations.
    I tried checking for duplicate SPN's by running setspn -x on affected machines. No results (although I do not understand
     what an SPN is or how it works). I rebuilt the performance counters.
    It tried setting 'sc config winrm type= own' as described in [http://blinditandnetworkadmin.blogspot.nl/2012/08/kb-how-to-troubleshoot-needs-attention.html].
    If I reboot this cc1-hyp-10 machine, it will start working perfectly again. However, then I can't troubleshoot the issue, and it will happen again.
    I want this problem to be solved, so vmm never loses connection to the hypervisors it's managing again!
    Background information:
    We've set up a platform with Hyper-V to run a VM workload. The platform consists of the following hardware:
    2 Dell R620's with 32GB of RAM, running hyper-v to virtualize the cloud management layer (DC's, VMM, SQL). These machines are called cc1-hyp-01 and cc1-hyp-02. They run the management vm's like cc1-dc-01/02, cc1-sql-01, cc1-vmm-01, etc. The names are self-explanatory.
    The VMM machine is NOT clustered.
    8 Dell M620 blades with 320GB of RAM, running hyper-v to virtualize the customer workload. The machines are
    called cc1-hyp-10 until cc1-hyp-17. They are in a cluster.
    2 Equallogic units form a SAN (premium storage), and we have a Dell R515 running iscsi target (budget storage).
    We have Dell Force10 switches and Cisco C3750X switches to connect everything together (mostly 10GB links).
    All hosts run Windows Server 2012R2 Datacenter edition. The VMM server runs System Center Virtual Machine Manage 2012 R2.
    All the latest Windows updates are installed on every host. There are no firewalls between any host (vmm and hypervisors) at this level. Windows firewalls are all disabled. No antivirus software is installed, no symantec software is installed.
    The only non-standard software that is installed is the Dell Host Integration Tools 4.7.1, Dell Openmanage Server Administrator, and some small stuff like 7-zip, bginfo, net-snap, etc.
    The SCVMM service is running under the domain account DOMAINCLOUD1\scvmm. This machine is in the local administrators group of each cluster node.
    On top of this cloud layer we're running the tenant layer with a lot of vm's for a specific customer (although they are all off now).

    I think I found the culprit, after an hour of analyzing wireshark dumps I found the vmm had jumbo frames enabled on the management interface to the hosts (and the underlying infrastructure does not).. Now my winrm commands started working again.

  • Unable to failover the services in active-active cluster node

    Hi,
    i am applying the sp2 patch for sql server 2008 r2 in active-active cluster, we have 3 services in the cluster , node 1 as 2 prefered owner and node 2 as 1 prefered owner, when i try to move the service from node 2 to node1 , i am getting the below errors
    DCOM was unable to communicate with the computer XXXXXXXXX using any of the configured protocols.
    The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server XXXXXXXXX. The target name used was RPCSS/XXXXXX. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal
    name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using
    a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server
    name is not fully qualified, and the target domain (XXXXXX) is different from the client domain (XXXXXXX), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
    The Cluster service failed to bring clustered service or application 'CHCROCHC045' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
    Cluster resource 'SQL Server (CHCROCHC045)' in clustered service or application 'CHCROCHC045' failed.
    any inputs appreciated to resolve this issue as i could not procedd with patching
    BR
    PGR

    Hi PGR,
    As the issue is more related to Windows Server, I would like to recommend you post the issue in the
    Windows Server forums for better support.
    In addition, below are some article about troubleshooting error ” DCOM was unable to communicate with the computer XXXXXXXXX using any of the configured protocols” for your reference.
    Event ID 10009 — COM Remote Service Availability
    How to troubleshoot DCOM 10009 error logged in system event?
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Error while getting cluster node subtree

    Hi,
      We are on SP15.
    The console logs show the following error
    log generation timestamp : 2006_01_17_at_17_14_05
    java.rmi.RemoteException: Error while getting cluster node subtree of :name=ClusterNodeRepresentative,j2eeType=com.sap.engine.services.adminadapter.impl.ClusterNodeRepresentative,SAP_J2EEClusterNode=2053400,SAP_J2EECluster=""; nested exception is:
         com.sap.engine.services.jmx.exception.MBeanServerClusterException: Exception during invocation of remote MBeanServer method, target node: 2053400
         at com.sap.engine.services.adminadapter.impl.ConvenienceEngineAdministratorImpl.getClusterNodeSubTree(ConvenienceEngineAdministratorImpl.java:242)
         at com.sap.engine.services.adminadapter.impl.ConvenienceEngineAdministratorImplp4_Skel.dispatch(ConvenienceEngineAdministratorImplp4_Skel.java:99)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.jmx.exception.MBeanServerClusterException: Exception during invocation of remote MBeanServer method, target node: 2053400
         at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:816)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
         at com.sap.engine.services.adminadapter.impl.ConvenienceEngineAdministratorImpl.getClusterNodeSubTree(ConvenienceEngineAdministratorImpl.java:239)
         ... 10 more
    Caused by: com.sap.engine.services.jmx.exception.JmxConnectorException: Unable to de-serialize request parameters, message [ JMX request (java) v1.0 len: 345 |  src: cluster target-node: 2053400 req: invoke params-number: 4 params-bytes: 0 | :name=ClusterNodeRepresentative,j2eeType=com.sap.engine.services.adminadapter.impl.ClusterNodeRepresentative,SAP_J2EEClusterNode=2053400,SAP_J2EECluster="" null null null ]
         at com.sap.engine.services.jmx.MBeanServerConnectionImpl.invokeMbsInternal(MBeanServerConnectionImpl.java:680)
         at com.sap.engine.services.jmx.MBeanServerConnectionImpl.invoke(MBeanServerConnectionImpl.java:467)
         at com.sap.engine.services.jmx.MBeanServerConnectionSecurityWrapper.invoke(MBeanServerConnectionSecurityWrapper.java:221)
         at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:813)
         ... 12 more
    Caused by: javax.management.InstanceNotFoundException: MBean with name com.sap.default:name=ClusterNodeRepresentative,j2eeType=com.sap.engine.services.adminadapter.impl.ClusterNodeRepresentative,SAP_J2EEClusterNode=2053400,SAP_J2EECluster=XD1 not found in repository
         at com.sap.pj.jmx.server.MBeanServerImpl.getClassLoaderFor(MBeanServerImpl.java:1408)
         at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getClassLoaderFor(MBeanServerWrapperInterceptor.java:455)
         at com.sap.engine.services.jmx.CompletionInterceptor.getClassLoaderFor(CompletionInterceptor.java:567)
         at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.getClassLoaderFor(BasicMBeanServerInterceptor.java:438)
         at com.sap.jmx.provider.ProviderInterceptor.getClassLoaderFor(ProviderInterceptor.java:330)
         at com.sap.engine.services.jmx.RedirectInterceptor.getClassLoaderFor(RedirectInterceptor.java:501)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getClassLoaderFor(MBeanServerInterceptorChain.java:443)
         at com.sap.engine.services.jmx.RequestMessage.readParams(RequestMessage.java:523)
         at com.sap.engine.services.jmx.RequestMessage.getParams(RequestMessage.java:578)
         at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:106)
         at com.sap.engine.services.jmx.JmxServiceConnectorServer.receiveWait(JmxServiceConnectorServer.java:173)
         at com.sap.engine.core.service630.context.cluster.message.MessageListenerWrapper.process(MessageListenerWrapper.java:81)
         at com.sap.engine.core.cluster.impl6.ms.MSListenerThread.run(MSListenerThread.java:47)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
         at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    java.lang.NullPointerException
         at com.sap.engine.services.adminadapter.gui.ClusterView.addGlobalDispatcherServiceProperties(ClusterView.java:455)
         at com.sap.engine.services.adminadapter.gui.ClusterView.createGlobalTrees(ClusterView.java:508)
         at com.sap.engine.services.adminadapter.gui.ClusterView.access$1200(ClusterView.java:29)
         at com.sap.engine.services.adminadapter.gui.ClusterView$4.run(ClusterView.java:420)
    java.rmi.RemoteException: Error while getting cluster node subtree of :name=ClusterNodeRepresentative,j2eeType=com.sap.engine.services.adminadapter.impl.ClusterNodeRepresentative,SAP_J2EEClusterNode=2053400,SAP_J2EECluster=""; nested exception is:
         com.sap.engine.services.jmx.exception.MBeanServerClusterException: Exception during invocation of remote MBeanServer method, target node: 2053400
         at com.sap.engine.services.adminadapter.impl.ConvenienceEngineAdministratorImpl.getClusterNodeSubTree(ConvenienceEngineAdministratorImpl.java:242)
         at com.sap.engine.services.adminadapter.impl.ConvenienceEngineAdministratorImplp4_Skel.dispatch(ConvenienceEngineAdministratorImplp4_Skel.java:99)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.jmx.exception.MBeanServerClusterException: Exception during invocation of remote MBeanServer method, target node: 2053400
         at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:816)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
         at com.sap.engine.services.adminadapter.impl.ConvenienceEngineAdministratorImpl.getClusterNodeSubTree(ConvenienceEngineAdministratorImpl.java:239)
         ... 10 more
    Caused by: com.sap.engine.services.jmx.exception.JmxConnectorException: Unable to de-serialize request parameters, message [ JMX request (java) v1.0 len: 345 |  src: cluster target-node: 2053400 req: invoke params-number: 4 params-bytes: 0 | :name=ClusterNodeRepresentative,j2eeType=com.sap.engine.services.adminadapter.impl.ClusterNodeRepresentative,SAP_J2EEClusterNode=2053400,SAP_J2EECluster="" null null null ]
         at com.sap.engine.services.jmx.MBeanServerConnectionImpl.invokeMbsInternal(MBeanServerConnectionImpl.java:680)
         at com.sap.engine.services.jmx.MBeanServerConnectionImpl.invoke(MBeanServerConnectionImpl.java:467)
         at com.sap.engine.services.jmx.MBeanServerConnectionSecurityWrapper.invoke(MBeanServerConnectionSecurityWrapper.java:221)
         at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:813)
         ... 12 more
    Caused by: javax.management.InstanceNotFoundException: MBean with name com.sap.default:name=ClusterNodeRepresentative,j2eeType=com.sap.engine.services.adminadapter.impl.ClusterNodeRepresentative,SAP_J2EEClusterNode=2053400,SAP_J2EECluster=XD1 not found in repository
         at com.sap.pj.jmx.server.MBeanServerImpl.getClassLoaderFor(MBeanServerImpl.java:1408)
         at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getClassLoaderFor(MBeanServerWrapperInterceptor.java:455)
         at com.sap.engine.services.jmx.CompletionInterceptor.getClassLoaderFor(CompletionInterceptor.java:567)
         at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.getClassLoaderFor(BasicMBeanServerInterceptor.java:438)
         at com.sap.jmx.provider.ProviderInterceptor.getClassLoaderFor(ProviderInterceptor.java:330)
         at com.sap.engine.services.jmx.RedirectInterceptor.getClassLoaderFor(RedirectInterceptor.java:501)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getClassLoaderFor(MBeanServerInterceptorChain.java:443)
         at com.sap.engine.services.jmx.RequestMessage.readParams(RequestMessage.java:523)
         at com.sap.engine.services.jmx.RequestMessage.getParams(RequestMessage.java:578)
         at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:106)
         at com.sap.engine.services.jmx.JmxServiceConnectorServer.receiveWait(JmxServiceConnectorServer.java:173)
         at com.sap.engine.core.service630.context.cluster.message.MessageListenerWrapper.process(MessageListenerWrapper.java:81)
         at com.sap.engine.core.cluster.impl6.ms.MSListenerThread.run(MSListenerThread.java:47)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
         at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    java.lang.NullPointerException
         at com.sap.engine.services.adminadapter.gui.ClusterView.addGlobalDispatcherServiceProperties(ClusterView.java:455)
         at com.sap.engine.services.adminadapter.gui.ClusterView.createGlobalTrees(ClusterView.java:508)
         at com.sap.engine.services.adminadapter.gui.ClusterView.access$1200(ClusterView.java:29)
         at com.sap.engine.services.adminadapter.gui.ClusterView$4.run(ClusterView.java:420)
    Any clue whats it?
    rgds

    Go the same error
    + /usr/java14_64/bin/java -showversion -Duser.language=en -DP4ClassLoad=P4Connection -Dp4Cache=clean -jar go.jar
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
    Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
    java.lang.NullPointerException
            at com.sap.engine.services.adminadapter.gui.ClusterView$4.run(ClusterView.java:405)
    Need some help!
    Bernard

  • INS-40925 - One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.

    Hi All,
    I am facing the below error while installing Oracle RAC in Silent Mode.
    SEVERE: There are no common subnets represented by network interfaces across all cluster nodes.
    SEVERE: [FATAL] [INS-40925] One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.
       CAUSE: Not all nodes have network interfaces that are configured on subnets that are common to all nodes in the cluster.
       ACTION: Ensure all cluster nodes have a public interface defined with the same subnet accessible by all nodes in the cluster.
    My /etc/hosts is given below.
    127.0.0.1        localhost    localhost.localdomain
    #Public
    192.168.1.101      rac1        rac1.localdomain
    192.168.1.102    rac2        rac2.localdomain
    #Private
    192.168.2.101    rac1-priv    rac1-priv.localdomain
    192.168.2.102    rac2-priv    rac2-priv.localdomain
    #Virtual
    192.168.1.103      rac1-vip    rac1-vip.localdomain
    192.168.1.104    rac2-vip    rac2-vip.localdomain
    #SCAN
    192.168.1.105    rac-scan    rac-scan.localdomain
    Could you please help me to get rid of the error INS-40925....Any Idea...???

    Hi Ramesh,
    Please find the result of ifconfig -a from both nodes RAC1 & RAC2.
    ifconfig -a in RAC1
    [oracle@rac1 Desktop]$ ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 08:00:27:17:7A:D5
              inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe17:7ad5/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:102 errors:0 dropped:0 overruns:0 frame:0
              TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:25472 (24.8 KiB)  TX bytes:3322 (3.2 KiB)
              Interrupt:19 Base address:0xd020
    eth1      Link encap:Ethernet  HWaddr 08:00:27:C0:AC:DB
              inet addr:192.168.2.101  Bcast:192.168.2.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fec0:acdb/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:240 (240.0 b)  TX bytes:816 (816.0 b)
              Interrupt:16 Base address:0xd240
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:56 errors:0 dropped:0 overruns:0 frame:0
              TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6394 (6.2 KiB)  TX bytes:6394 (6.2 KiB)
    virbr0    Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    virbr0-nic Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    ifconfig -a in RAC2
    [oracle@rac2 Desktop]$ ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 08:00:27:C9:38:82
              inet addr:192.168.1.102  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fec9:3882/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:122 errors:0 dropped:0 overruns:0 frame:0
              TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:32617 (31.8 KiB)  TX bytes:5157 (5.0 KiB)
              Interrupt:19 Base address:0xd020
    eth1      Link encap:Ethernet  HWaddr 08:00:27:90:B5:A0
              inet addr:192.168.2.102  Bcast:192.168.2.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe90:b5a0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:240 (240.0 b)  TX bytes:746 (746.0 b)
              Interrupt:16 Base address:0xd240
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:56 errors:0 dropped:0 overruns:0 frame:0
              TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6390 (6.2 KiB)  TX bytes:6390 (6.2 KiB)
    virbr0    Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    virbr0-nic Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

  • CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

    Cluster with 2 hosts 2012 R2
    Scheduled CAU fails with:
    CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
    Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
    If I run CAU "Analyze Readiness" ALL comes as PASS
    If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
    Anybody any ideas?
    Thanks
    Seb

    Hi,
    In some case if you disabled the connection in Windows firewall inbound of
     "Cluster aware updating" service it will can’t use the CAU.
    More information:
    Starting with Cluster-Aware Updating: Self-Updating
    http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
    What is Cluster Aware Updating in Windows Server 2012? (Part 1)
    http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
    Cluster-Aware Updating Overview
    http://technet.microsoft.com/en-us/library/hh831694.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • What are the preferred methods for backing up a cluster node bootdisk?

    Hi,
    I would like to use flarcreate to backup the bootdisks for each of the nodes in my cluster... but I cannot see this method mentioned in any cluster documentation...
    Has anybody used flash backups for cluster nodes before (and more importantly - successfully restored a cluster node from a flash image..?)
    Thanks very much,
    Trevor

    Hi, some backround on this - I need to patch some production cluster nodes, and obviously would like to backup the rootdisk of each node before doing this.
    What I really need is some advice about the best method to backup & patch my cluster node (with a recovery method also).
    The sun documentation for this says to use ufsdump, which i have used in the past - but will FLAR do the same job? - has anyone had experiance using FLAR to restore a cluster node?
    Or if someone has some other solutions for patching the nodes? - maybe offline my root mirror (SVM) - patch root disk - barring any major problems - online the mirror again??
    Cheers, Trevor

  • File Being processed in two cluster nodes

    Hi ,
    We are having two cluster nodes and when my  adapter picks the file, the file is getting processed in 2 cluster nodes.
    I believe the file should get processed in either of the cluster node but not in both cluster nodes.
    Has any one faced this kind of situation in any of your projects where you might be having different cluster nodes.
    Thanks,
    Chandra.

    Hi Chandra
      Did u get a chance to see this post.. it may help
        Processing in  Multiple Cluster Nodes
    Regards,
    Sandeep

  • Processing in  Multiple Cluster Nodes

    Hi All,
    In our PI system we have 2 Java nodes due to some requirement. When the communication channel runs and we check the message log, in one Cluster node we have a successful message. In other Cluster Node we have an error message that says "File not found".
    The file processing is completeing successfully on one Cluster node. But I wanted to know if there is any way to suppress the processing of the same file by same channel on another Node. Some setting in administration or IB where we can get this done.
    Is there any way to get this done by some setting?
    Thanks,
    Rashmi.

    Hello!
    As per note #801926, please set the clusterSyncMode parameter on Advanced tab of the communication channel with LOCK value.
    And also check the entries 4 and 48 of the FAQ note #821267:
    4. FTP Sender File Processing in Cluster Environment
    48. File System(NFS) File Sender Processing in Cluster Environment
    Best regards,
    Lucas

  • Help with a Blind Configuration of a G5 Cluster node

    So I bought 2 G5 Cluster Nodes to dedicate some audiovisual processes to them. My only other mac computer is a Core 2 Duo Macbook Pro.
    Using Pacifist, I was able to do a clean install of Mac OSX onto the internal drive by putting it into an external enclosure.
    Now here is my problem: The cluster nodes have no videocard.
    I plan on using them through the OSX Screen Sharing function, when they will be conencted to the network, but I don't know how to do the initial configuration of Mac OS X on them, since I can not boot from a system using the Apple Partition Map on my Macbook pro, and the Cluster node will not boot from the GIUD partition scheme.
    Can anyone please help me?
    Thanks,
    Chuck

    Assuming you're running Mac OS X Server on the cluster node, just boot the server normally - it will run a special first-time-boot process that sets up a network listener.
    You can then install the Server Admin tools on your MacBook Pro and run Server Assistant. Server Assistant will look out over the network and find the new servers, then give you the opportunity to configure them remotely (assign account data, IP address, etc.).
    (note you can also do this as part of the initial install process - boot the server from the Install DVD and run the entire OS installation and configuration remotely via Server Assistant)
    Note: If you're not running Mac OS X Server on the cluster nodes then the above doesn't apply

  • Cluster node (1 out of 6) is in error for a file channel - SAP XI

    Hi,
    In one of a sender file channel for an interface, one java node out of 6 configured ones failed. The error message says "Login Incorrect" while the other cluster nodes are polling properly. I have tried to update the password in the channel's configuration in Integration Directory and activated it. This doesnt help. Please advice!
    Thanks in advance!
    Regards,
    Kumaran

    Hello Kumaran,
    The status of the file adapter is not reflected properly but this should not have an impact. No message might have arrived at that node yet. Once it receives a message for processing, the status will be changed.
    Anil

  • How to set  time on cluster nodes

    We have setup of two cluster node. Both having the same time runing . Now i have to change this time to 15-20 mnts. backward on both nodes. I want to know whether online with date command can set the date on indivisual nodes or any precautions need to take ?
    Thanks in advance
    sanjay

    use ntp: network time protocol. set up ntpd correctly to get time from external ntp server that is open to the public, or a ntp pool

  • Query regarding Cluster nodes in CC

    Hi Experts,
    We have a query regarding the cluster nodes available in the CC monitoring.
    Can two nodes of a same channel can poll at the same time?
    Kindly suggest what should be done to make a specific cluster node of a CC polls at a particular time.
    Thanks
    Suganya.

    Hi,
    There is an answered thread on this
    Processing in  Multiple Cluster Nodes
    Regards,
    Manjusha

  • Connected to an idle instance in sun cluster nodes.

    i have two sun cluster node sharing common storage.
    Two schema's:
    test1 for nodeA
    test2 for nodeB.
    My requirement is as below:
    Login into b node.
    export ORACLE_SID=test1.
    sqlplus / as sysdba.
    But i am getting as
    "connected to an idle instance"
    Is there any way to connect to node A schema from Node B.

    I found the answer..
    sqlplus <sysdbauser>/<password>@test1 as sysdba

Maybe you are looking for

  • Runtime Exceptions

    All right - I keep hearing that "senior" and "valued" and "respected" and "long-time" forum members are leaving. Who and why? I haven't really been here that much the past few days, so I'm not in the loop on this one. I assume it is because of the "u

  • Apple Mail crashes after having installed Mavericks

    I have installed the new OS Mavericks and mail is now crashing as soon it is launched. This is a BIG problem, as I have multible accounts to administer! Is this a known bug and does anybody out there have the same problem or better a solution!? Thank

  • Adding Chapters to iTunes Video?

    What's the easiest way to add chapter marks (or some sort of breaks) into long, unedited videos in iTunes?

  • Premiere Pro CC Mute / Solo bug

    Mute and Solo seems to enable and disable by themselves when I save a project, ie if I save a timeline with three audio tracks and track one muted, then quit Premiere and re-open the project, all three audio tracks will be muted. It happened on a sma

  • Upgrading from final cut express to final cut studio

    Hi there. I'm upgrading from FC express to FC studio. How do I uninstall fc express, soundtrack and live type from my IMAC before I install FC studio or what is recomended? planeman5