Cluster Not Available error when booting OVM server DOM0 from USB
Hi all,
I have been wanting to run OVM 2.2 from a USB stick for a while now. I ran through the install CD today and saw there was a 'minimal USB install' option on the installation screen. So I plugged in a 4GB USB stick, rebooted, and ran the USB install.
After a while, the install completed, OVM booted up perfectly it seemed, and I was happy.
The server had no local storage apart from this USB stick as we are going to be hooking it up to an iSCSI target for guest VM storage.
This was a new lab setup, so I got the VM Manager running on another system, connected to the USB booted OVM server, and went to create a pool.
Running the 'test connection' that worked fine.
Trying to add the pool - failed. I got the error 'Cluster Not Available'
On the OVM server I did a repos.py -l and nothing gets listed.
I understand that for HA you need a repository with shared storage. However, before I have used these same install CDs with a singe local hard disk, to get OVM server running, and it did so fine.
So what's different with the USB disk install that means you don't get a repository?
Do I have to create a special repository LUN, manually connect the OVM server to this, and then use repos.py to create it?
Cheers,
Jeff
Ok I have read, re-read related parts of the underground manual and have hit a brick wall with the 'simple' task of setting up a NIC for dedicated iSCSI traffic. The manual does not cover this task in the iSCSI SAN section.
So I'm in a catch 22.
My OVM server boots up, with it's single management NIC configured, but once booted - I don't want to connect to the iSCSI target via this network - I need it completely closed off.
I want to use another NIC (or bond of two) for dedicated iSCSI traffic to and from the OVM Server.
However, the underground manual strangely only seems to cover a single NIC configuration! It looks like he assumes you are going to be running iSCSI on your management NIC, which I can only think is incredibly bad practice.
I have installed OVM with the linux asknetwork - this did not give me the option to configure additional interfaces.
I then manually edited /etc/sysconfig/network-scripts/ifcfg-eth1 on the OVMServer, restarted network, restarted the entire box - I can ping my new NIC / IP locally from within the OVM server, but I can not connect to the iSCSI target, nor can I ping the iSCSI NIC on the OVM server from the target.
This is such a simple thing to try to achieve - super frustrating...
Jeff
Similar Messages
-
RPC Server not Available error when using Windows Fax & Scan under Windows 7
RPC Server not Available error when using Windows Fax & Scan under Windows 7
Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
'Profile Server Not Available' error when trying to access Profile Manager
Hello all,
I'm totally, totally new to OS X Server, but I have a class full of new iMac's and MacBook's that I want to be able to manage all in one go. Don't really mind about File Sharing, access from anywhere in the world etc. but I just want to be able to push updates to all of them at once as well as manage some default settings for them all.
I've set up most of what I can see I need to do in OS X Server such as the server itself as a .local, Profile Manager, Websites, VPN, Open Directory and Software Update, but when I try to access my .local through any browser, I get the main screen, but get an error page when I try to go into Profile Manager that says 'Profile Server Not Available. Please wait a moment and try again.'
Can anyone suggest where they think I might be going wrong or need to do? I can give more information or screenshots if needed, juts let me know. Any help super appreciated
Yours,
ElliotHey,
Sorry, because I'm so new I don't quite get what you mean. A little more information is I'm using my MacBook which is connected to the same WiFi network as the other Mac's. What do you mean by the FQDN?
I'm able to type in the IP address etc. on any other of the Mac's and it loads the 'Welcome to OS X Server' page, it's just when I select Profile Manager, I get the error. Thanks for getting back though, appreciated the quick help.. and I'm still super stuck. I've got a whole day on it today ha.
Elliot -
The server is not available error when synci
Hi,
When click the sync manager in Vista x64 I get the error box "The server is not available. Contact your administrator if this condition persists". Does anyone know how to sort this out as it used to work on Vista ok but has stopped in the past few weeks?
Thanks in advance
MikeUnder the sync manager go to Player Settigns->"Your Device" and check to see what is setup to sync. I would guess that the settings for synchronizing "Organizer data" is checked and that its trying to contact microsoft outlook (or other email program) to synchronize contact and calendar info. But that is just a guess. Its the only reason I can think of why you would get an error about not being able to contact a server.
-
I am trying to connect Windows 7 Pro 64 bit SP1 Computers to a Windows Server 2012 Essentials R2 domain and I receive the following error: "The server is not available. Try connecting to this computer again, or for more information, see Troubleshoot
connecting computers to the server." I have tried all of the steps in the Microsoft technet article "http://technet.microsoft.com/library/jj635102.aspx" and still am receiving this error. A little background on this specific case...
All of these computers were already attached to a different Windows Server Essentials 2012 R2 domain. They have all been taken off the existing domain and added to a workgroup. I have uninstalled the Server Essentials 2012 Connector and deleted
all log files. Has anyone else had this issue? Any help would be greatly appreciated! This is an urgent issue... Thanks in advance all!Would you be willing to run this script on your server?
http://gallery.technet.microsoft.com/Windows-Server-Essentials-556159c3
Also on a client to test connectivity?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
"Page not found or not available" error when accessing workitem from UWL
Hi SAP Gurus,
I encounter a perculiar problem in our portal system, was wondering if any of you guys encounter it before.
When one of the users accesses the UWL screen and click on a particular workitem(approve trips), he gets a portal error message "Page not found or not available".
Usually we get this message if the user does not have some form of authorization, but the things is I have setup the permissions of the UWL for "end-user" for "everyone" and all existing roles in the portal.
heres our systems setup:
-R/3 4.7
-ITS 6.2
-EP7
-Authentication through LDAP server, the roles in the server are tied to the groups that the LDAP ID is tied to.
The funny thing is, only this particular user has the problem, other users with the same roles didn't encounter such message. Also, the user do not have problem accessing to other UWL workitems, (eg, leave approval, claims, etc) only the Trips Approval have the problem.
Anyone have any ideas? Could it be some roles in the R/3 side. Any suggestions?
As usual, point will be awarded to useful answers.
Regards,
JansenAnswered for myself. My situation related to the Credit/Dispute Management application. In my case, a standard task type was also defined for another application. I had re-prioritize the xml configuration for Credit Manager, and modify the xml to include a system alias within the item configuration. Now, my item is using the correct configuration and tasks are launching correctly from the UWL.
Thanks!
- David
PS - Did not need to do back-end configuration.
Message was edited by: David Karpman -
Error when booting app server for first time
Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PMIf not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas. -
Portlet not available error when customizing Omni Portlet
Hi,
I've created a webcenter page with a omni portlet on it. Configuring this portlet for the first time is OK. However customizing this same portlet later on will always give me the portlet unavailable error, together with this stacktrace.
SEVERE: oracle.adf.model.portlet.binding.PortletBindingException: Portletmodus 5 kan niet worden ingesteld voor portletbinding OmniPortlet1_1., Please check the privileges before executing this operation
at oracle.adfinternal.view.faces.renderkit.html.portlet.ADFPortletServlet.process(ADFPortletServlet.java:473)
at oracle.adfinternal.view.faces.renderkit.html.portlet.ADFPortletServlet.process(ADFPortletServlet.java:343)
at oracle.adfinternal.view.faces.renderkit.html.portlet.ADFPortletServlet.doGet(ADFPortletServlet.java:315)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Adding adf security does not help.
Any suggestions are greatly appreciated. Note that I have the same problem with different portlets, so it has nothing to do with this specific OMNI portlet I guess.
Jaco VerheulThe timing... :) having the same issue. Is there any resolution to this or should I also open an SR to get the patch/fix?
Also, to help others searching for this error...
Portlet unavailable when trying to click customize for an OmniPortlet.
Portlet unavailable
<!--Unable to set portlet mode 5 for portlet binding OmniPortlet5_1, Please check the privileges before executing this operation-->
<!--oracle.adf.model.portlet.binding.PortletBindingException: Unable to set portlet mode 5 for portlet binding OmniPortlet5_1, Please check the privileges before executing this operation
at ...
-->
Steve
Message was edited by:
ssaxer -
Namespace not found error when creating data server for xml with namespace
Hi
I tried creating XML data server in ODI with namespace in xml file. I followed the below steps but could not success in creating the dataserver. however when I remove the namespace in xml file I am able to reverse engineer the xml file.
1) Create xml data server
2) select xml driver - com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
3) Provide the jdbc url - jdbc:snps:xml?f=D:/xmlnew/sample_namespace.xml&s=xmlns&d=D:/xmlnew/sample_namespace.dtd
xml content
<f:root xmlns:f="http://www.w3.org/TR/html4/">
<table>
<name>African Coffee Table</name>
<width>80</width>
<length>120</length>
</table>
</f:root>
DTD content
<!ELEMENT f:root ( table ) >
<!ELEMENT length ( #PCDATA ) >
<!ELEMENT name ( #PCDATA ) >
<!ELEMENT table ( name, width, length ) >
<!ELEMENT width ( #PCDATA ) >
when I test connection it shows the following error.
java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1100)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:371)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:794)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:754)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:137)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:133)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:87)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:389)
at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:421)
at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.<init>(SnpsXmlDTD.java:150)
at com.sunopsis.jdbc.driver.xml.SnpsXmlSchema.<init>(SnpsXmlSchema.java:478)
at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.createNewSchema(SnpsXmlSchemaManager.java:292)
at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.getSchemaFromProperties(SnpsXmlSchemaManager.java:270)
at com.sunopsis.jdbc.driver.xml.SnpsXmlDriver.connect(SnpsXmlDriver.java:114)
at oracle.odi.jdbc.datasource.DriverManagerUtils$DriverProxy.connect(DriverManagerUtils.java:23)
at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:368)
at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:352)
at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:316)
at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:275)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:99)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)Hi,
Thans for your reply.
This is the DTD for my xmldoc.
<!ELEMENT Data (Department+)>
<!ELEMENT EmployeeID (#PCDATA)>
<!ATTLIST EmployeeID col (EMPID) #IMPLIED>
<!ELEMENT Education (EmployeeID, Sequence, Dgree)>
<!ATTLIST Education table NMTOKEN #IMPLIED>
<!ELEMENT Employee (EmployeeName, EmployeeID, DepartmentID, Education*)>
<!ATTLIST Employee table NMTOKEN #IMPLIED>
<!ELEMENT EmployeeName (#PCDATA)>
<!ATTLIST EmployeeName col NMTOKEN #IMPLIED>
<!ELEMENT DepartName (#PCDATA)>
<!ATTLIST DepartName col NMTOKEN #IMPLIED>
<!ELEMENT Table (Column+)>
<!ATTLIST Table importType NMTOKEN #IMPLIED>
<!ATTLIST Table parentTable NMTOKEN #IMPLIED>
<!ATTLIST Table tag NMTOKEN #IMPLIED>
<!ATTLIST Table columns NMTOKEN #IMPLIED>
<!ATTLIST Table name NMTOKEN #IMPLIED>
<!ELEMENT DepartID (#PCDATA)>
<!ATTLIST DepartID col NMTOKEN #IMPLIED>
<!ELEMENT MetaData (Table+)>
<!ELEMENT Sequence (#PCDATA)>
<!ATTLIST Sequence col NMTOKEN #IMPLIED>
<!ELEMENT Dgree (#PCDATA)>
<!ATTLIST Dgree col NMTOKEN #IMPLIED>
<!ELEMENT Export (MetaData, Data)>
<!ELEMENT DepartmentID (#PCDATA)>
<!ATTLIST DepartmentID col NMTOKEN #IMPLIED>
<!ELEMENT Column (#PCDATA)>
<!ATTLIST Column deleteKey NMTOKEN #IMPLIED>
<!ATTLIST Column isKey NMTOKEN #IMPLIED>
<!ELEMENT Department (DepartName, DepartID, Employee+)>
<!ATTLIST Department table NMTOKEN #IMPLIED>
Thanks again!
Yan -
Native VM not supported error when start WebLogic Server on Solaris
I created a weblogic domain and server using configuration wizard from workshop 8.1, the JVM is jdk142_05. When I start weblogic server, get follwing error: native VM not supported. The enviroment is
Solaris.
We used the same jdk started medrec example without problem. Any idea for the possible cause?
Thank any one who can help.
Zhong
uberpeer% ./startWebLogic.sh
JAVA Memory arguments: -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=:/rg2/opt/bea/weblogic81/server/lib/weblogic_knex_patch.jar:/rg2/opt/bea/weblogic81/common/lib/log4j.jar:/rg2/opt/bea/weblogic81/server/lib/debugging.jar:/rg2/opt/bea/weblogic81/server/lib/knex.jar:/rg2/opt/bea/weblogic81/javelin/lib/javelin.jar:/rg2/opt/bea/weblogic81/server/lib/wlw-lang.jar:/rg2/opt/bea/jdk142_05/lib/tools.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic_sp.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic.jar:/rg2/opt/bea/weblogic81/server/lib/ant/ant.jar:/rg2/opt/bea/jdk142_05/jre/lib/rt.jar:::/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient+ssl.jar:/rg2/opt/bea/weblogic81/server/lib/xbean.jar:/rg2/opt/bea/weblogic81/server/lib/wlxbean.jar:/rg2/opt/bea/weblogic81/server/lib/xqrl.jar:/rg2/opt/bea/weblogic81/server/lib/netui/netui-compiler.jar:/rg2/opt/bea/weblogic81/server/lib/wli.jar:/rg2/opt/bea/weblogic81/server/lib/fop.jar:/rg2/opt/bea/weblogic81/integration/adapters/sample/lib/sample-eis.jar:
PATH=/rg2/opt/bea/weblogic81/server/bin:/rg2/opt/bea/jdk142_05/jre/bin:/rg2/opt/bea/jdk142_05/bin:/opt/bea/weblogic700/server/lib/solaris:/opt/bea/jdk131_03/jre/bin:/opt/bea/jdk131_03/bin:/rg1/users/zhongw/weblogic/PMDomain:/rg2/opt/bea/weblogic81/workshop:/rg1/users/zhongw/bin:/bin:/usr/bin:/usr/sbin:/usr/java/bin:/usr/openwin/bin:/opt/local/bin:/usr/ccs/bin:/usr/per15/bin:/usr/local/SUNWspro/bin:/usr/local/accurev/bin:/opt/jakarta-ant/bin:/usr/local/accurev/bin:/usr/ccs/bin:/usr/local/bin:/opt/enJin/2.3.1/bin:/usr/java/bin:/usr/openwin/bin:/usr/dt/bin:/rg1/users/zhongw/Borland/JBuilder2005/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
/rg2/opt/bea/jdk142_05/bin/java -client -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -native -Xverify:none -da -Dplatform.home=/rg2/opt/bea/weblogic81 -Dwls.home=/rg2/opt/bea/weblogic81/server -Dwli.home=/rg2/opt/bea/weblogic81/integration -Dlog4j.configuration=file:/rg2/opt/bea/weblogic81/common/lib/workshopLogCfg.xml -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ignoreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=/rg2/opt/bea/weblogic81/server/lib/weblogic.policy weblogic.Server
Error: native VM not supported
Stopping Pointbase server...
Pointbase server stopped.I believe this is the error you get when you try to start up a JVM with the commandline option '-native'.
Remove this flag from your startup script and retry.
By the way, it may be that you have the environment variable 'JAVA_OPTIONS' set to '-native' in which case:
(first confirm this is the case)
$ echo $JAVA_OPTIONS
-native
(Then edit the startup script if you get the result above)
add in a line:
# To remove '-native' flag
unset JAVA_OPTIONS
and retry.
I have to confess I don't know what the '-native' flag is actually supposed to do, but my JVM also reports back that this is unsupported. -
Printer not installed error when using reports server
Im using three NTYRE architecture when i have to run my application on 128kbps leazed line network across 30 units,requirement is to generate text output at the client side for printing some report formats in character mode.
im trying to generate a text file on server and then download to local machine for printing .but reports server gives an error printer not installed,
i have checking administrative security probs in WINNT ,
pls suggest or is there any other way to generate text reports in NTIER arch.
regardsHi,
You may want to check if a printer is installed in your WinNt system. Reports picks up font information from the default
printer installed in the system when we attempt to generate to file.
thanks
-sudha -
VNic Mac addresses not associated correctly when installing OVM Server
We are trying to get our first Oracle VM environment running and noticed that on the UCS the mac assocated with eth0 ended with 0B but on the Oracle install the eth0 interface mac address ends with 08. The mac for eth3 on the Oracle install lines up with what the UCS sees as eth0. How do we correct this and ensure the interfaces line up so that eth0 on the UCS is eth0 on the Oracle service profile ?
This is going to depend on how Oralce numerates the PCI BUS. That will dictate which PCI device the OS sees in which order.
You can try manipulating the order using a vNIC placement policy. This will allow you to ensure certain vNIC/vHBAs appear first on the PCI BUS for the host.
Regards,
Robert -
O1034 Oracle not available error
Right, I'm running on a Windows Xp platform, I've installed ok and it runs ok. I have manually altered the password of user HR from within sqlplus, and everything is fine.The problem comes when I switch off and switch back on, I am unable to start the database.
Running sqlplus system/password gives me ORA-01034 Oracle not available and ORA-27101: Shared memory realm does not exist.
I have tried running stobdb.bat and startdb.bat which both run ok, but I still get the oracle not available error when going into sqlplus. It seems that the PC does not install the oracle set up on booting perhaps? I also cannot access the "Go to database home page", from my web browser, but I'm not sure if it is necessary to access that home page?We are seeing this a little bit, and not sure what is causing it at this stage. Starting the database manually seems to help, or at least points to the root cause problems.
The steps to start the database manually are posted at Re: ORA-01033 after starting and trying to connect. and also posted below
To shutdown manually go to the SQL Command Line (as the OS user that installed Oracle).
At the SQL Prompt SQL> issue
connect / as sysdba
For example
SQL> connect / as sysdba
Connected.
Then type
shutdown immediate;
You should see the following
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
Then type
startup
You should see the following
SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1249348 bytes
Variable Size 192942012 bytes
Database Buffers 402653184 bytes
Redo Buffers 2940928 bytes
Database mounted.
Database opened.
Just to be sure, also try a select
select count(*) from hr.employees;
You should see
SQL> select count(*) from hr.employees;
COUNT(*)
107
Any problems or errors reported with any of these steps, please let us know. -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
PiyushHi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A
Maybe you are looking for
-
T.code for Intransit stock
Hi experts, Pls, give T.code for see intransit stock, Out of MB5T, Here my requirement is , that to check transit stock as per date wise Secode problem, Pls, give T.code for reschedule qty for already allocated qty, Out of V_V2 My requirement for res
-
Change the colour of my submenu in spry-UI-1.7
hello, as the title says, how do i change the background colour of my submenu (the one that collapses) and the hover action background. i created it with the widget browser, but found out this colour doesnt work so well. in my spry-UI-1.7>css>Menu>b
-
What can I do to stop the vertical scroll bar from freezing up or vanishing?
I am mostly in the App Store, but often the vertical (up & down) scroll bar will freeze up so it does not move or while scrolling with it, the bar vanishes! How can I fix this or can it be fixed?
-
I have tried every trouble shoot thing I can find, checked all the updates and this shuffle stil is not recognized by my computer. HELP! Please help before I pull ALL my hair out.
-
Stalled at 3.95ghz w/ X58 Pro
Hey Guys, I have a X58 Pro motherboard that's currently clocked at 3.95ghz. I'm real happy with the performance so far, compared to my GA-EX58-UD3R, but I'd like to push it a little farther. As the heading states, I'm stalled at 3.95ghz. If someone