Cluster of Data Service servers on multiple operating system

Hi All,
Does Data Service support deployments in different OS but in one cluster?
E.g.
One server in Windows and one server in Unix but connecting to same repository to form a cluster?
Thanks,
Bobby

YES, jobservers from different OS's can connect to the same repository.
YES, these jobservers from different OS's can be in the same servergroup (I guess that is what you mean with "cluster") for load balancing & failover.

Similar Messages

Mapping in Services Interface with multiple operation... ?

Hi ALL,
I have a SOAP to SOAP scenario here Just PI 7.1 with EHP1 acting a bus no mapping nothing .
1) I have the WSDL file from the receiver system with multiple synchronous operations in it ..i imported the wsdl as External Definition .. i used the same the WSDL file to create the sender Service interface also...
when i created the service interface with the operation in it , i just gave the same operation name from the WSDL.this i followed for the sender and receiver service interface.
1)now the issue is do i need any operation mapping if the service interface has more than one operation ...?
2) I compelted the scenario without any operation mapping ..but i am getting this error ..Problem occurred in receiver agreement for sender -ICRM_D to receiver -EXACTTGETWEBSERVICE_D,http://ICRMtoExactTaetWebservice.com.si_os_ICRM_EXACTTETWEBSERVICE: No standard agreement found for , ICRM_D, , EXACTTARGEBSERVICE_D, http://ICRMtoExactarebservice.com, si_os_ICRM_EXACGETWEBSERVICE..?
pls help me in this issue..
Thanks
Souz

you might want to read this /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype
you will need to create additional configurations for multiple operations to be supported

Please help me get my laptop back someone has cracked the master password and is running multiple operating systems which I have no access to

Okay so I am not a computer expert by any means and have no clue how to fix my system. My father worked for intel for over 20 years as an engineer I asked him to restore my laptop to its original factory state and instead he cracked the master password
installed multiple operating systems and made himself the administrator or domain controller. Many features and options I do not have access to so reading the trouble shooting and going through the steps always leads me to a dead end. The laptop is TOSHIBA
SATELLITE L875D-S7332 a6 VISION AMD WINDOWS 8. As far as I can see my profile is actual running a version of windows 7. I do see reference to a windows 8RT windows 2003 windows vista wow64 and 32 I don't know what all that means I would just like to know how
wipe everything and get back to the factory condition I bought it in. If anyone can help it would be much appreciated

Do you have Win 7 installation disk? If yes, then go ahead and format the laptop if you don't need any data. If you need the data it it, then copy the same to USB disk and format it. Removing OS and deleting these things will anyhow keep some remains on
HDD. TO get the speed and performance back, you might need a fresh installation.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Provider proxy error - Service Interface with multiple operations

Hello experts,
I've a synchronous provider proxy scenario using an inbound and outbound service interface.
That service interface contains 3 operations: create, change and delete a table entry.
I created all the necessary repository objects and integration scenario objects.
Next, I generated a provider proxy on the ECC backend system and created an endpoint via SOAMANAGER.
When I test, I get this error:
No implementing class registered for the interface (ABAP interface, request message ...., request message, namespace....)
I currently use a receiver XI adapter in the scenario. Is that ok?
or should I use a receiver SOAP adapter with a SOAP action?
Please advise.
Thanks a lot.
Dimitri

Hi,
Check these
INTERFACE_REGISTRATION_ERROR:No implementing class reg'd for interface
No implementing class registered for the interface
Regards
Seshagiri

Core services configuration files in Operating System

Hello everybody,
I am trying to make a modification to
CMC --> Servers --> Service Categories --> Core Services --> CentralManagementServer (Common settings)
However, I cannot access it because of a connection issue (that has to do with the modification that I am trying to make). My question is whether I can access and modify the specific configuration files directly from OS and not through the web interface (CMC).
My platform is IPS 4.1 sp2.
Thanks in advance,
Kanellos

Hi Denis,
Our server is hosted on windows OS. I followed your advice and restarted SIA using port 6401 instead of 6400. That way, I was able to login to CMC and perform the fix I wanted. After that I changed back SIA to use port 6400.
Just to give you the full picture, my initial problem was with Data Services. I couldn't (and still cannot) connect via my laptop with DS client to my repository. The error message I am hitting on is:
"Logon failed to specific system.
Check system name, port number, user name, password, authentication method and try again.
Additional information: <Session: SDK failure>"
I am pretty sure that system name, port number (6400), user name and password were correct, so I tried to look into other possibilities. While searching I came across one post that was mentioning that is not enough to have port 6400 open but DS will use one more port. If "Auto Assign" options is selected then the other port to be used is random, but you can uncheck it and force CMS/DS to use specific port. It sounded a valid possibility in my case because in the environment I am working at the moment all ports are closed except for the ones that I have requested to be open. However, I didn't want to make a request for opening another port before confirming that this would fix my problem, so I decided to use port 6400 that was already opened (and in use of course!). When I made the change, I got the following error:
35101
The root server reported an error Initialization Failure. (Reason: An unexpected problem (exception) happened. Reason given: The port number specified for the server is already in use. (FWB 00092), The server has problems using TCP/IP. The port number you are using is probably already in use..).
And this is when I started this thread.
If you have any suggestions/advice on how I can resolve my underlying issue, please share.
Thanks and regards,
Kanellos

Installing Multiple Operating Systems with grub and Arch Linux

NOTE: Please keep in mind that there are many different ways to achieve this same result using various loop and ramdisk methods, read this with a separate window to jot down your comments and suggestions... this is ongoing for me so any help would be appreciated!
Read the full article at Install Multiple Os without cds
This is my first post and I plan on making this topic an official HOWTO with www.tldp.org.
I have been into the computer security scene since 1990, but I realized that I had very little experience with the various LInux, Unix, and alternative Operating systems out there.
I have a CD-RW drive but being a struggling computer security researcher I had no money for blank cd-recordables. What follows is how I managed to install various operating systems on my computer (1 hard drive) without having to burn to a CD the ISO and then boot from that.
I first partitioned my 120GB harddrive into 10 partitions, the 2nd partition is a small swap and the last partition is extra large because it holds all the ISO images..
I then wrote a small shell script to automatically download (I love wget!) the following.
OpenBSD
IpCOP
Libranet
Arch-Linux
Fire
Local Area Security
Packet Master
Devil-Linux
FreeBSD
Knoppix
Helix
Gentoo
Yoper-Linux
NetBSD
RedHat
Slackware
The script also downloaded Installation manuals and md5 checksums.. (let me know if I should post... its pretty unsophisticated
I installed Slackware (personal favorite) on hda1 using my last blank CD-R, note that I do not have a separate boot partitino. (Should I?). I also installed grub on the MBR. I love grub, if you read through the man pages and all info you can find about grub, you can learn a whole lot. Grub has much more features and capability than lilo, even though lilo comes installed by default with slack.
I organize my kernel situation as follows... In my /boot directory, I mkdir KERNEL, CONFIG, MAP, INITRD and that is a good way for me to keep my kernels and everything organized.. Another good way is a separate dir for each new kernel.
Since Arch-Linux is a solid distro, I'll use that as a first example.
Here is the Arch-Linux section of my shell script
goge Arch-Linux
$w http://puzzle.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.iso
$w http://unc.dl.sourceforge.net/sourceforge/archlinux/arch-0.6.md5sum
$w http://www.archlinux.org/docs/en/guide/install/arch-install-guide.html
md55
cat arch-0.6.md5sum
md5sum arch-0.6.iso
md55
The first thing to do is to mount the downloaded ISO image so we can use it as if it were an actual CD.
mount -t iso9660 -o ro,loop=/dev/loop0 cdimage /mnt/cdrom
Where cdimage= the ISO image. EX. /usr/local/src/ISO/Linux/Arch-Linux/arch-0.6.iso
This mounts the iso as /mnt/cdrom.
Next you need to copy /mnt/cdrom to a separate partition for the booting process. So mkfs.ext2 /dev/hda9. ( I prefer reiserfs or even XFS to ext but if you use something other than ext2 you could run into some problems because some of the installation kernels and initrds don't include support for reiserfs and so can't recognize the files. Although you could use mkinitrd to create a new initrd with reiserfs support, that might be pushin it IMO... I use the 9th partition consistently for this. I know there is a "right" way to copy the /mnt/cdrom files so everything stays the way it is supposed too, using tar or cpio, but I'm lazy so I just do cp -rp.
(What is the tar or cpio commands to copy with correct permissions etc??)
So you mount the 9th partition as whatever, say /mnt/hd and then copy the files. Now what?
Now edit your /boot/grub/menu.lst file to include the specific options to boot arch-linux installation.
A good idea is to find the isolinux.cfg file somewhere on the distro cd, this will tell you what to include in the menu.lst.
Here is the section in my menu.lst
title Arch Install
root (hd0,8)
kernel /isolinux/vmlinuz load_ramdisk=1 prompt_ramdisk=0 root=/dev/rd/0
initrd=/isolinux/initrd.img
This should be self-explanatory. The root (hd0,8) is pointing to partition 9. So the rest of the commands start from partition 9.
When you experience problems, remember you can always edit the grub boot options by typing 'e' and then edit the section. Also, a good idea is to include several variations in your menu.lst so you can easily try other ways to boot efficiently. And, remember to read up on all the installation guides that come with your distro, specifically, hard-disk installs.
There are special cases, Gentoo, has a semi-new compressed filesystem called squashfs. BTW, this is AWESOME, so check it out. It has to be compiled into the kernel, so some work is in order, but use this recompile to optimize your kernel. You can get the squashfs patch for almost any kernel. I use the latest stable 2.6 kernel. Squashfs is incredible and although I don't think you need it to install from ISO, you do need it to expand the livecd.squashfs filesystem that comes with the cd.
Heres a sample Gentoo section from my menu.lst
title Gentoo Install
root (hd0,8)
kernel /isolinux/gentoo root=/dev/ram0
initrd=/isolinux/gentoo.igz init=/linuxrc acpi=off looptype=squashfs loop=/livecd.squashfs cdroot vga=791 splash=silent
A nother' tip is the shell that is provided if you experience problems, typically busybox or ash. The key tools to get you going from here is mount and chroot. Sometimes you will need to manually create a simulated file system and then chroot into it. For instance, you might have to create boot, etc, bin, directories on the target partition.
I generally install each OS onto the next partition (careful of the logical partition) and add it to my menu.lst after install. A good idea is after installation, copy the kernel and initrd(if there is one) to the slackware(or whatever) boot partition on hda1. I copy kernels to /boot/KERNEL/ and initrd's to /boot/INITRD, then menu.lst is more organized...
You then need to add an updated section to your menu.lst (just comment out the install section for later)
Here is the finished arch-linux section from menu.lst
title Arch Linux 6
root (hd0,2)
kernel /boot/vmlinuz26 ro root=/dev/hdc3
This doesn't use my convenient boot/KERNEL/vmlinuz26 as you can tell by setting the root to partition 3.
***NOTE: Make a backup of MBR using dd and save to floppy, also backup the partition table to floppy, using cfdisk or parted. And boot disks (I use 1 with grub, and 1 with slack, and tomsbootdisk) will invariably come in handy. Tomsbootdisk is recommended, and make the grub boot disk when you install grub. install to floppy.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The final result after some fun experimenting, is when I boot, I have a cool grub boot screen come up with the option to boot into whatever OS I want, this is handy for multiple reasons. One good thing to do after this is to port scan and vuln scan each OS, after you update of course. Write this stuff down and you will know the weaknesses/strengths of the various OS's.
I can boot a custom Firewall, snort, or multiple honeypots using this procedure, as well as a graphical kde environment with a kernel optimized for graphics and my processor/architecture, or an environment devoted to forensics or even an environment suitable for programming.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
P.S. Some of the cooler alternative operating systems are BeOS 5, EOS, ER_OS, V2_OS, and my personal favorite Menuet. Menuet is 100% assembly graphical operating system that fits on a floppy. Its f'in money!
This should be a good enough example to get you started, this kind of thing should be learned and not just copied... Knowing how to do this stuff could prove to be exceptionally useful...

Start by reading all the articles built-in on your Mac - Help > Mac Help, search "printer sharing."
http://desk.stinkpot.org:8080/tricks/index.php/2008/04/how-to-print-to-a-cups-se rver-from-mac-os-x/
http://www.macosxhints.com/article.php?story=20080324224027152&query=share%2Bpri nter
http://members.cox.net/18james/osxprintersharing.html
http://ubuntuforums.org/archive/index.php/t-56940.html

Share firefox profile across multiple operating systems.

I've recently installed windows 8 on a VHD (my main OS is Windows 7) and I was wondering if it was possible to share the same firefox profile on both operating systems. I have the profile manager from [http://ftp://ftp.mozilla.org/pub/mozilla.org/utilities/profilemanager/ ftp://ftp.mozilla.org/pub/mozilla.org/utilities/profilemanager/], but when I tried to make a new profile at the location of my main profile, it instead made a subdirectory under my main profile. Is there anything I can do to share the profile between the two? I could always use sync, but I would like to share my addons, if possible.

* Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

IPhone with multiple operating systems (win/mac)

Does the iPhone have any problems switching between operating systems? ie: if it's used for a few months with iTunes on a PC and then you switch to iTunes on a Mac, will there be any problem moving over all the contacts, music...etc?
I remember some of past iPods had issues that once they were "formatted" for one OS, you couldn't really use them with a different one without wiping them clean and starting over.

The iPhone has it's own OS, and syncing between Macs and PCs is not a problem. There's no formatting issue involved.

Tmboot fails started by a Sun Cluster Agent (Data Service)

Hi,
we are using TUXEDO 6.5 in conjunction with ADC's Singl.eView.
Starting TUXEDO by calling tmboot -y works fine in the command prompt.
Starting TUXEDO within a Sun Cluster Agent, which internaly calls tmboot -y as
well, fails with the foolowing error messages:
004859.lbgas1!GWTDOMAIN.5762: 08022002: TUXEDO Version 6.5 SunOS 5.5.1 Generic_103640-29
sun4u sparc SUNW,Ultra-1.
004859.lbgas1!GWTDOMAIN.5762: LIBTUX_CAT:262: INFO: Standard main starting
004901.lbgas1!GWTDOMAIN.5762: LIBGWT_CAT:1223: WARN: Reach system open max(0)
limit
004901.lbgas1!GWTDOMAIN.5762: LIBGWT_CAT:1122: ERROR: Unable to allocate free
fd structure
004901.lbgas1!GWTDOMAIN.5762: LIBGWT_CAT:1124: ERROR: Unable to open listening
endpoint
004901.lbgas1!GWTDOMAIN.5762: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
ubbconfig entries for GWTDOMAIN:
GWTDOMAIN SRVGRP="GWADMGROUP" SRVID=2
REPLYQ = N
RESTART = Y
GRACE = 0
MAXGEN = 5
CLOPT = ""
RQADDR = "GWADMGROUP"
What configuration do I have to change, a TUXEDO one or Sun ?
Can I drop an application server in ubbconfig ?
Lutz

Patch #232, CR041488 seems to address this:
GWTDOMAIN connection problem when maxfiles kernel parm set > 32K
Perhaps the Cluster Agent sets a higher ulimit when it runs.
See if you are running the latest patch.
Scott Orshan
Lutz wrote:
>
Hi,
we are using TUXEDO 6.5 in conjunction with ADC's Singl.eView.
Starting TUXEDO by calling tmboot -y works fine in the command prompt.
Starting TUXEDO within a Sun Cluster Agent, which internaly calls tmboot -y as
well, fails with the foolowing error messages:
004859.lbgas1!GWTDOMAIN.5762: 08022002: TUXEDO Version 6.5 SunOS 5.5.1 Generic_103640-29
sun4u sparc SUNW,Ultra-1.
004859.lbgas1!GWTDOMAIN.5762: LIBTUX_CAT:262: INFO: Standard main starting
004901.lbgas1!GWTDOMAIN.5762: LIBGWT_CAT:1223: WARN: Reach system open max(0)
limit
004901.lbgas1!GWTDOMAIN.5762: LIBGWT_CAT:1122: ERROR: Unable to allocate free
fd structure
004901.lbgas1!GWTDOMAIN.5762: LIBGWT_CAT:1124: ERROR: Unable to open listening
endpoint
004901.lbgas1!GWTDOMAIN.5762: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
ubbconfig entries for GWTDOMAIN:
GWTDOMAIN SRVGRP="GWADMGROUP" SRVID=2
REPLYQ = N
RESTART = Y
GRACE = 0
MAXGEN = 5
CLOPT = ""
RQADDR = "GWADMGROUP"
What configuration do I have to change, a TUXEDO one or Sun ?
Can I drop an application server in ubbconfig ?
Lutz

Multiple operating system crashes- the computer has rebooted from a bugcheck

For last couple of months I have been facing multiple crashes every day. Looking for help diagnose it. The memory dump file is 797 MB. Is there an option wherein I can make any sense out of it under guidance from community here- or should i simply try
a clean install of win 8.1

Hi grensmoothie,
Any update here?
You may follow the guide posted by Team Zigzag (http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/warning-disabling-the-new-windows-update-ui-may/dc846517-eca0-4960-b0ff-1eb7227223f5),
For BSOD related issue, we do need the dump file to give a proper suggestion.
Besides, if you would like to debug the dump file by yourself, you may follow the WIKI article below:
Windows Bugcheck Analysis
Best regards
Michael Shao
TechNet Community Support

Boot camp Multiple operating systems

I need to install both Windows EXP and Vista on my mac has any one tried it and how did you do it

Hi Kev,
see here: http://www.windowsonthemac.com/forums/index.php?showtopic=2
Good Luck
Stefan

Multiple operating system/machine installs of CC

I am a Creative Cloud subscriber and I would like to know is I can install one copy on my desktop Windows machine and the second on my Apple laptop?

Yes.
Refer the Getting Started section of the Cloud FAQ
Adobe Creative Cloud – FAQ

Eclipelink plsql web services multiple operation

Hi,
In 11.1.2.2 jdev, I can generate a toplink/eclipse link plsql web services easily for one SQL (dbws).
Can I change the web services to support multiple operations, each for different select sql?
I've tried to changed the wsdl file to have multiple operations
and amend eclipse link-dbws.XML to include multiple query tags.
The web services can be run with multiple operation wsdl but the response of each operation
(using Jdev http analyzer) return only the result of the first operaton.
Can anyone help?
Regards,
Neln
Edited by: Nelson Ng on Nov 10, 2012 8:45 PM

Hi,
I think you are asking for multiple select statements processed by a single TopLink DB Service Provider configuration. As far as I know its exactly one per project and service. However, as this feature is coming from EclipseLink you may want to verify it there
Frank

PI 7.1 - Multiple Operations - NO_RECEIVER_CASE_ASYNC

Hello All
I am using PI 7.1, Proxy to JDBC scenario. I a trying to use a single Service Interface with multiple operations (Customer, Vendor). When I test the scenario I am getting the error "NO_RECEIVER_CASE_ASYNC" at SXMB_MONI. Receiver Determination is configured as Operation Specific. However this error occurs.
Has anyone who could help me on this?
Thanks
John Jeyaraj

Hi John ,
following is one of my wiki where I have explained how to determine receiver system based on operation if you have multiple operations under single service interface..
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=233472879
in your case make sure that you have done configuration as expected and object receiver determination is active and there is no problem in Cache..
if configuration is correct then this might be problem with cache..
check cache..
check your object status in tcode SXI_CACHE
try activating your receiver determination object and one more time..
Thanks,
Bhupesh

Does the sender SOAP adapter support multiple operations per interface

Hi guys,
does the sender SOAP adapter support multiple operations per interface? (interface type of 7.1)?
Thanks,
Andrzej

theoretically Yes.
Do have a look into this when you get time
/people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype

Cluster of Data Service servers on multiple operating system

Similar Messages

Maybe you are looking for