Cluster on VM

Hello,
I have speant the last 4 days trying to build a Virtual cluster on ESX server 3.0.2 with Solaris 10. The OS installs no problems, I can ping and telnet to each other with no catches. However, I first installed Sun Cluster 3.2, tried to get it to install, and I kept running into an issue where my nodes wouldn't boot into cluster mode. After reading at this website and various others, I come to realize that Cluster 3.2 is only available in 64bit editions. However, one feed said that cluster express is 32-bit available. So I download version 2-08 and try to install it and I keep getting a Java error. I'm thinking that I need to perhaps update and patch my server, however, updating it makes it so that the server won't boot up again. I was booting 120007-14 kernel patch, and upgraded to the current one (unfortunatly, because the server wouldn't boot up, and I didn't write down the version before re-installing, I don't remember which patch it was) which made my system extremly unstable.
My question is, before I forget....What are the required patches for open cluster to run on Solaris 10.
Also, before someone says install Solaris 11 (OpenSolaris) I have not been able to successfully install it on VM ESX 3.0.2. If any one has been able to, let me know how or even better, send me your image!!
Thanks in advance,
Luke

Hi,
it depends what you would like to achieve. A good starting point is
SPARC: Oracle Solaris Cluster Topologies - Oracle Solaris Cluster Concepts Guide
regards
Walter

Similar Messages

  • Hiding a Maintenance View in a View Cluster

    Hello ABAP Experts,
    We have a scenario where we would like to hide a maintenance view to an existing view cluster based on condition.
    Is it possible via events of a view cluster, where i can hide the view at runtime based on some condition before the view cluster is displayed ?
    Is there any way as well, which help achieve this hiding of views ?
    For example in the below View Cluster, i would like to hide "Define object links" view from the main view cluster "Define document Types".
    Thanks,
    Naresh

    Hi Naresh,
    Yes, you can do it in events of a view cluster, define a subroutine and bounding it to event(02) in SE54,
    when you define the subroutine, it will ask you creat a mian program, in this main program, you need  'INCLUDE lsvcmcod'.
    Then you can access some standard data, http://help.sap.com/saphelp_nw04/helpdata/en/62/c302c7de8e11d1a5960000e82deaaa/frameset.htm
    INCLUDE lsvcmcod.
    FORM yourSubroutineName.
    DATA: viewname TYPE vclstruc-object,
            error_flag TYPE vcl_flag_type,
      viewname = 'ZTEST_VIEW1'.
    *  PERFORM vcl_set_table_access_for_obj USING    viewname
    *                                       CHANGING error_flag.
      ----> according your condition to change the view.
    IF xxx = yyy.
      DELETE vcl_struc_tab WHERE object = viewname.
    ENDIF.
    ENDFORM.
    regards,
    Archer

  • BI publishing report issue on HP-UX cluster

    Dear All,
    I have a problem about BW publish report .
    Our customer has three BI systems (PRD, QAS, DEV) and three BOE system (XIR3.1).
    Those systems are installed on HP-UX.
    BOE QAS and DEV system used Tomcat, BOE PRD system deployed on SAP WAS.
    SAP QAS and DEV system can publish crystal report to each BOE system.
    But SAP PRD can not publish with error
    u201C0000000001 An error occured when retrieving the role metadata for ZBIROLE001. Returned with RFC code 18 and message: See RFC trace file  or SAP system log for more details. u201D
    Customer PRD system is a cluster environment.
    Copy Error message for u201Cdev_rfc0u201D:
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3299
    CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223
    Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    Copy Error message for u201Cdev_rdu201D:
    LOCATION    SAP-Gateway on host BIPRDA / sapgw00
    ERROR       connection to partner '192.168.7.1:56298' broken
    LOCATION    SAP-Gateway on host BIPRDA / sapgw00
    ERROR       connection to partner '192.168.7.1:60597' broken  
    I test RFC connection with SM59 and test RFC destinations in /crystal/rptadm successfully.
    I also compared the RFC settings and User role between SAP DEV system and PRD system. But I did not any find difference.
    This role had been imported in to BOE system and the SAP user has  administrator rights .
    Is there anyone can give me some advice for next step?
    Thanks in advance!
    Wayne

    Hi Ingo,
    - are you using the BW publishing service or the SAP gateway ?
    Customer used BW publishing service.
    - does SM59 work properly ?
    Yes, SM59 works well.
    - did you create a trace file for the publishing already ? If not - create it and attach it do the forum.
    I am not sure which trace do I need. Could you tell me the details?
    Thanks a lot!
    Wayne

  • Can we setup two sets different 7912 logos in one CCM cluster?

    Hi,
    CCM 4.1(3) cluster within head office. We created the 7912 logo for system default image. However, the remote site 7912 phones, need to use a different logo other than the head office.
    as per http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc5d3d/0#selected_message
    We can create the 7912 logo, but how can we setup two or more different 7912 logos for different sites?
    We noticed on CCM4.1(3), there is idle URL for 7912 phone, what is the callmanager default link for this URL? I am thinking to use different logo file names, and put the related URL on this parameters for remote site 7912 phones.
    Could someone let me know or any other better way to do?
    Thanks,
    JJ

    Hi JJ,
    This should work just the way you have described. Have a look;
    Idle
    Enter the URL that displays on the Cisco IP Phone display when the phone has not been used for the time that is specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.
    Leave this field blank to accept the default setting.
    Idle Timer (seconds)
    Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.
    Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecfc7.html#1121361
    Here how on CCM;
    Method 1:
    Choose System > Enterprise Parameters so that the change is propagated to all of the phones from the Cisco CallManager Administration page.
    In the URL Idle field, enter http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the URL Idle Time field, enter any positive value in seconds.
    Method 2:
    Choose Device > Phone under the Cisco IP Phone configuration so that only this phone displays the graphics from the Cisco CallManager Administrator page.
    Choose the phone/phones on which you want to put the display.
    In the Idle field, enter the path http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the Idle Timer field, enter any positive value in seconds.
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml#topic4
    Hope this helps!
    Rob

  • Is there a way of getting Coherence to run without starting up a cluster?

    It's painful to run unit-tests against Coherence because I can't find a way of configuring it with a simple local in-memory scheme, but still get to test features requiring custom POF types, etc..
    I have implemented the advice here: http://coherence.oracle.com/display/COH35UG/Setting+Single+Server+Mode
    But it still seems far too slow when you are used to unit tests taking milliseconds- and things seem to have got slower with Coherence 3.5.
    Are there any plans to allow disabling of the TCMP/clustering layer? This would greatly improve the product in my opinion.

    You can set the "<join-timeout-milliseconds>" (on [<multicast-listener>|http://coherence.oracle.com/display/COH35UG/multicast-listener]) to the lowest possible number. Make sure to remember to set it to the recommended value when you want to start testing in a cluster again.
    Rob
    :Coherence Team:

  • How to Extract Data for a Maintenance View, Structure and Cluster Table

    I want to develop  3 Reports
    1) in First Report
    it consists only two Fields.
    Table name : V_001_B
    Field Name1: BUKRS
    Table name : V_001_B     
    Field Name2: BUTXT
    V_001_B is a Maintenance View
    For this one I don't Find any Datasource
    For this Maintenance View, How to Extract the Data.
    2)
    For the 2nd Report also it consists Two Fields
    Table name : CSKSZ
    Field Name1: KOSTL (cost center)
    Table name : CSKSZ
    Field Name2: KLTXT (Description)
    CSKSZ is a Structure
    For this one I don't Find any Datasource
    For this Structure How to Extract the Data
    3)
    For the 3rd Report
    in this Report all Fields are belonging to a Table BSEG
    BSEG  is a Cluster Table
    For this one also I can't Find any Datasource,
    I find very Few Objects in the Datasource.
    For this One, How to Extract the Data.
    Please provide me step by step procedure.
    Thanks
    Priya

    Hi sachin,
    I don't get your point can you Explain me Briefly.
    I have two Fields for the 1st Report
    BUKRS
    BUTXT
    In the 2nd Report
    KOSTL
    KLTXT
    If I use  0COSTCENTER_TEXT   Data Source
    I will get KOSTL Field only
    what about KLTXT
    Thanks
    Priya

  • How to get the data from a cluster table to BW

    Dear All,
    I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
    Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
    In SE11 Transaction the Cluster (table ZES) is showing invalid table.
    I referred some Forums, but no use.
    Can any body tell me procedure to get the data from a cluster (table ZES) ?
    Waiting for you results.
    Thanks and regards
    Rajesh

    HI Siggi,
    Thank you for your reply..
    I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
    How can I use the Fields from the that table.?
    What can I do now, can you please explain me about this point.
    Waiting for your reply.
    Thanks and Regards
    Rajesh
    Message was edited by:
            rajesh

  • Error while saving a Entry through view cluster ( getting TK 319 message)

    We are  facing an issue while saving the entry in one of the view at the lowest level of the three level View cluster.
    Please find the Details of view Cluster below.
    1)First level- Key  => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) .
    2)Second level-Key =>MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + START_DATE( DATS ,8).
    3)Third level (Lowest level  )-key => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + MEAL_RULE_TYPE( INT1 ,3) +  START_DATE( DATS ,8) .
    we are not able to save the Entry at the Third level  and is getting the  Message "Fill table key for table ITC_CALCRULE_ML only up to position 044 only " .
    As per our understanding problem is that " the transport interface is called with a incorrect object key for table ITC_CALCRULE_ML  "  . we thaught of either reduce the width of the key or if we want
    to define also  the date, by  changing the order of MEAL_RULE_TYPE and START_DATE .Also we could use a CHAR1 instead of the INT1 for the MEAL_RULE_TYPE.
    After analyzing  this  we came to a conclusion that we have two solutions for solving it.
    1) Database Design Change : Which is generally not preferable.
    2) Apply the Event  12  ( After changing the key entries for the change task (E071K) ) on the view and in its code we reduce the Object key width for the Transport Organizer  and
        would be able to save the entry in the database  and would be able to transport the entries to our Q-system.

    Hi. Were you able to fix the error?

  • Error while creating a View Cluster

    Hello Gurus,
         I have created two maintenance views ZVIEW1 & ZVIEW2  with table maintenance generator.Know I am trying
         to create a view cluster using these views.
         I have Proceeded with the following steps to create the View Cluster:
         1. Tcode : SE54 --> GIven the name ZVIEWCLUSTER as View Cluster name & pressed ENTER.
         2. Filled the description of the View cluster.
         3.Selected the tab OBJECT STRUCTURE  and filled it with ZVIEW1 & ZVIEW2.
         4.Selected view ZVIEW1 and clicked on button "FIELD-DEPENDENCE" ,System throws a message
             "Field-dependence generated succesfully"
         5. Selected view ZVIEW2 and clicked on button "FIELD-DEPENDENCE" ,System throws an error message
             "No log generated".
          Am stuck up at point 5 in the above mentioned steps.
          Please guide me in coming out of this error message.
    Regards,
    Najam

    Hi Najam,
    I don't think you need to define field dependencies for both tables, you only define the relationship from the second table to the first.
    Double-click on the Field dependencies folder and check the link between the two tables is correctly defined, if so you don't need to generate the field dependency twice.
    Regards,
    Nick

  • Error in invoking a process in JBoss Cluster

    Hi,
    I have recently installed LC 8.2 on a JBoss 4.2.0 Cluster. The OS of the 2 cluster nodes are Windows 2003 R2 Enterprise Edition SP2.
    And the database is SQL Server 2005 Ent. Ed. installed on another Windows 2003 R2 Enterprise Edition SP2.
    I have created a simple process on the first node of the cluster. When I invoked the process through Workbench, I get ALC-DSC-003-000: com.adobe.idp.dsc.DSCInvocationException: Invocation error. with the following root cause:
    Caused by: javax.naming.NameNotFoundException: adobe_JmsQueueXA not bound
    at org.jnp.server.NamingServer.getBinding(NamingServer.java:529)
    at org.jnp.server.NamingServer.getBinding(NamingServer.java:537)
    at org.jnp.server.NamingServer.getObject(NamingServer.java:543)
    at org.jnp.server.NamingServer.lookup(NamingServer.java:296)
    at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:627)
    at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:589)
    at javax.naming.InitialContext.lookup(InitialContext.java:351)
    at org.jnp.interfaces.NamingContext.resolveLink(NamingContext.java:1063)
    ... 142 more
    I get the same error even I close the second node in the cluster.
    How can I fix this error?
    Thanks

    UPDATE!!
    I have added the following lines to hajndi-jms-ds.xml file in /server/all/deploy/jms:
        true
        adobe_JmsQueueXA
        jms-ra.rar
        org.jboss.resource.adapter.jms.JmsConnectionFactory
        JMS Adapter
        javax.jms.Topic
        JmsXARealm
        java:/DefaultJMSProvider
        true
        adobe_JmsTopicXA
        jms-ra.rar
        org.jboss.resource.adapter.jms.JmsConnectionFactory
        JMS Adapter
        javax.jms.Topic
        JmsXARealm
        java:/DefaultJMSProvider
    But this time I get a different error:
    Caused by: javax.jms.JMSException: Could not create a session: org.jboss.resource.JBossResourceException: Unable to setup connection; - nested throwable: (javax.jms.JMSSecurityException: User: guest is NOT authenticated)
                    at org.jboss.resource.adapter.jms.JmsSessionFactoryImpl.allocateConnection(JmsSessionFactory Impl.java:403)
                    at org.jboss.resource.adapter.jms.JmsSessionFactoryImpl.createQueueSession(JmsSessionFactory Impl.java:144)
                    at com.adobe.idp.jobmanager.ejb.JobManagerBean.createJob(JobManagerBean.java:222)
                    ... 135 more
                    at com.adobe.idp.dsc.provider.impl.base.AbstractResponseHolder.handleException(AbstractRespo nseHolder.java:136)
                    at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkBindingStubUtil.deSerializeResponse( SoapSdkBindingStubUtil.java:122)
                    at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.doSend(SoapAxisDispatche r.java:128)
                    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
                    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
                    at com.adobe.common.utils.invoke.InvokeWithProgressRunner.invokeServiceOperation(InvokeWithP rogressRunner.java:170)
                    at com.adobe.common.utils.invoke.InvokeWithProgressRunner.run(InvokeWithProgressRunner.java: 97)
                    at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
    I guess the error is related with login-config.xml, as there are some policy options with "guest" value. But, in fact I carefully followed the instructions on Adobe documentation : prepareinstallcluster.pdf and clustering_jboss.pdf

  • Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

    Hi All,
    I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
    The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
    The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
    The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
    Test Disk 3" as follows:
    The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
    After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
    It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
    Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
    If you modify the data in the SharedVolumeMappings value in both
    0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
    The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
    and would be prone to errors that could cause further problems.
    Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
    My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
    Many thanks in advance,
    Tom

    Hi Subhasish,
    Thanks for the reply, glad that its something that is reproducible!
    Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
    If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
    VMs?
    Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
    Thanks again,
    Tom

  • Error while checking the status of Oracle Cluster ware

    Hi
    I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
    -bash-3.2$ ./crsctl stat res -t
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4000: Command Status failed, or completed with errors.
    -bash-3.2$
    But when I ran below one:
    -bash-3.2$ ./crsctl stat res -t -init
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.asm
    1 ONLINE ONLINE sfv9699 Started
    ora.cluster_interconnect.haip
    1 ONLINE ONLINE sfv9699
    ora.crf
    1 ONLINE ONLINE sfv9699
    ora.crsd
    1 ONLINE OFFLINE
    ora.cssd
    1 ONLINE ONLINE sfv9699
    ora.cssdmonitor
    1 ONLINE ONLINE sfv9699
    ora.ctssd
    1 ONLINE ONLINE sfv9699 OBSERVER
    ora.diskmon
    1 OFFLINE OFFLINE
    ora.drivers.acfs
    1 ONLINE ONLINE sfv9699
    ora.evmd
    1 ONLINE INTERMEDIATE sfv9699
    ora.gipcd
    1 ONLINE ONLINE sfv9699
    ora.gpnpd
    1 ONLINE ONLINE sfv9699
    ora.mdnsd
    1 ONLINE ONLINE sfv9699
    So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
    Alert <server_name>.log
    2012-10-20 15:37:51.408
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:52.968
    [crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:52.984
    [crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    ]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
    2012-10-20 15:37:53.471
    [ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
    2012-10-20 15:37:53.472
    [ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
    CRSD.log
    2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
    2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [  OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
    [  OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [  OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [  OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [  OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
    2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
    2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
    2012-10-20 15:37:52.978: [  OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
    2012-10-20 15:37:52.981: [  OCRRAW][3563381328]proprinit: Could not open raw device
    2012-10-20 15:37:52.981: [  OCRASM][3563381328]proprasmcl: asmhandle is NULL
    2012-10-20 15:37:52.983: [  OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
    2012-10-20 15:37:52.984: [  CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
    ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
    2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
    =======================
    I see in the above log that saying ASM instance is down and failed to open +DATA .
    But the asm instance up and running
    SQL> select instance_name,status from v$instance;
    INSTANCE_NAME STATUS
    +ASM1            STARTED
    And we havent created any disk named DATA before the installation. We have created only below two disks
    SQL> select name,header_status from v$asm_disk;
    NAME HEADER_STATUS
    ASM_DATA MEMBER
    FLASH_RECOVERY MEMBER
    But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
    SQL> select name,state from v$asm_diskgroup;
    NAME STATE
    DATA MOUNTED
    Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
    [root@SFV9699 bin]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    Seems like its trying to read the old disk DATA.
    we have done asmscanning too with oracleasm scan disks. but no use.
    Where I can remove the old entry of DATA disk.
    It would be a great if a quick response get.
    Thanks
    SHIYAS M

    The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
    2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
    [ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
    2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
    2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
    ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
    ORA-27301: OS failure message: Operation not permitted
    ORA-27302: failure occurred at: skgpwinit6
    ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
    2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
    2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
    2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
    The only disks created are
    [root@SFV9699 dev]# oracleasm listdisks
    ASM_DATA
    FLASH_RECOVERY
    And these disks are showing part of that group also.. Not quite sure how this happened..
    what abt dropping this group.. will anything work.

  • Reporting Services as a generic service in a failover cluster group?

    There is some confusion on whether or not Microsoft will support a Reporting Services deployment on a failover cluster using scale-out, and adding the Reporting Services service as a generic service in a cluster group to achieve active-passive high
    availability.
    A deployment like this is described by Lukasz Pawlowski (Program Manager on the Reporting Services team) in this blog article
    http://blogs.msdn.com/b/lukaszp/archive/2009/10/28/high-availability-frequently-asked-questions-about-failover-clustering-and-reporting-services.aspx. There it is stated that it can be done, and what needs to be considered when doing such a deployment.
    This article (http://technet.microsoft.com/en-us/library/bb630402.aspx) on the other hand states: "Failover clustering is supported only for the report server database; you
    cannot run the Report Server service as part of a failover cluster."
    This is somewhat confusing to me. Can I expect to receive support from Microsoft for a setup like this?
    Best Regards,
    Peter Wretmo

    Hi Peter,
    Thanks for your posting.
    As Lukasz said in the
    blog, failover clustering with SSRS is possible. However, during the failover there is some time during which users will receive errors when accessing SSRS since the network names will resolve to a computer where the SSRS service is in the process of starting.
    Besides, there are several considerations and manual steps involved on your part before configuring the failover clustering with SSRS service:
    Impact on other applications that share the SQL Server. One common idea is to put SSRS in the same cluster group as SQL Server.  If SQL Server is hosting multiple application databases, other than just the SSRS databases, a failure in SSRS may cause
    a significant failover impact to the entire environment.
    SSRS fails over independently of SQL Server.
    If SSRS is running, it is going to do work on behalf of the overall deployment so it will be Active. To make SSRS Passive is to stop the SSRS service on all passive cluster nodes.
    So, SSRS is designed to achieve High Availability through the Scale-Out deployment. Though a failover clustered SSRS deployment is achievable, it is not the best option for achieving High Availability with Reporting Services.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • Nested IPE (In Place Element) usage when accessing Cluster/Array data via DVR

    I am sharing data across several VIs and loops via a DVR, and accessing the data via a DVR IPE. The data is a cluster of arrays. The diagram below (VI attached) illustrates the structures invloved, but not the structure of the application.
    (The diagram above does not include initialization of the arrays, as it is intended only to illustrate the Cluster1 data type. Array lengths could be 100.)
    The DVR (DVR1) is passed to multiple VIs of the application at startup.
    Each VI executes loops that either read or write particular elements of each array (fArray1 or fArray2).
    I believe the DVR IPE (B1-DVR) provides blocking so that only one task can modify the data (Cluster1) at any time.
    Case 1 illustrates how I currently WRITE to array elements. The outer IPE (block B1) is rolled into a VI (not shown) that takes DVR1, Index, and Value as inputs.
    Cases 2 - 4 illustrate 3 additional methods that remove one or both of the inner IPEs (B2-Cluster and B3-Array).
    Case 2: IPE B3 (Array Index/Replace Elements) is replaced with a non-IPE 'Replace Array Subset'.'
    Case 3: IPE B2 (Unbundle / Bundle Elemnts)' is replaced with a non-IPE cluster 'Unbundle'/'Bundle'.
    Case 4: removes both B2 and B3.
    I implemented case 1 a long time ago.  When I had to do the same thing again recently, I did case 4.  When I stumbled across my earlier implementation, I was a bit suprised
    Which of the 4 cases should take the least time (or resources) to execute? I think case 4 has as few array allocations as any of the other 3.
    The attached image did not capture the Buffer Allocation marks, so I marked the ones that differed with a red "B".
    I am only interested in differences in how the arrays are handled, so I see no signioficant differences.
    Is this one of those cases where LV doesn't need my help?
    Incidently, I recently wrote a small app with shared data and decided to try FGVs to share array data.  For small arrays, 10^7 iterations, and an FGV based array-element read followed by a element write, the FGV was faster.  1.2us per read/write for FGV vs 3us per r/w for an DVR/IPE based read/write (like above).
    Peter
    LV 2011 SP1, Windows 7 64-Bit
    Attachments:
    IPE.vi ‏9 KB

    Option 1 is a definite no and as far as I know it has been NI's explicit intention to steer clear from it. I believe there's an idea in the IE which asks for this.
    I agree that option 2 makes sense, but I don't think it should be something the user specifies. Either LV can detect it automatically or it can't, but I doubt NI would let you have an option which creates the possibility for this kind of bug.
    I'm not sure, but the mark as modifier option on the IPES might be the option you're looking for. I know that it exists and I know very roughly what it does, but the documentation for it is very limited and I never actually played around with it, as usually I don't need these kinds of optimizations.
    You may well be right that a new option on the IPES is desirable and you should probably add it to the idea exchange.
    As for NIWeek, I'm not going this year, so I have no idea what kinds of sessions are around, but it's a great place to find people who know what they're talking about and ask them about it directly. Certain people in LV R&D would probably be ideal for this and if you ask relevant people, you might even get their names. I'm sure buying them a beer would also help to loosen their tounges. If you ask me, this type of interaction is the main value of the conference, not the sessions themselves.
    Try to take over the world!

  • SAPOSCOL not running in MS Cluster

    Hi, gurus:
    We have a problem with SAPOSCOL in a SAP ECC 6.0 system (SAP ECC 6.0 + NetWeaver 7.00 + Oracle 10.2 + Windows Server 2003 R2 Enterprise x64 Edition) running over a MS cluster:
    Transactions OS06/ST06 shows no data, and they show an info message wich states: SAPOSCOL not running ? (shared memory not available ). When we checked this issue, we noticed that, in fact, there is no sapcoscol.exe task running in any node.
    But when we try to start the service (both using microsoft services console and cmd commands) although we can see the process running in the node which owns all the resources, SAP seems not notice that. The information system shows in ST06>Operating System Collector>Status is the following:
    iinterval             0             sec.
    Collector Version:
    Date/time             05.09.2008 16:55:01
    Start of Collector
    Status report
    Collector Versions                         
      running                                   COLL 20.95     700     - 20.64     NT 07/10/17
      dialog                                   COLL 20.95     700     - 20.65     NT 08/02/06
    Shared Memory                              attached
    Number of records                         575
    Active Flag                              active     (01)
    Operating System                         Windows NT     5.2.3790 SP     2 BL-SAP2 4x AMD64 Level 1
    Collector PID                              0 (00000000)
    Collector                                   not running (process ID not found).
    Start time coll.                              Thu Jan 01     01:00:00 1970
    Current     Time                              Fri Sep 05     16:55:01 2008
    Last write access                         Mon Sep 01     11:28:23 2008
    Last Read  Access                         Fri Sep 05     15:54:00 2008
    Collection Interval                         10     sec     (next delay).
    Collection Interval                         10     sec     (last ).
    Status                                   read
    Collect     Details                         required
    Refresh                                   required
    Header Extention Structure                    
    Number of x-header          Records          1
    Number of Communication     Records          60
    Number of free Com.          Records          60
    Resulting offset to     1.data rec.               61
    Trace level                                   3
    Collector in IDLE -     mode ?               NO
      become idle after     300     sec     without     read access.|
      Length of     Idle Interval                    60     sec
      Length of     norm.Interval                    10     sec
    But saposcol.exe is running with a certain PID in the same note than SAP and Oracle under user sapservice<sid>
    We have tried to run saposcol in several ways (as, I have noted before: from microsoft service console, from cmd line using "net start saposcol", using the saposcol under C:\WINDOWS\SapCluster and the one under
    F:\usr\sap\PRD\sys\exe\run, fom the two nodes, accessing the cluster through several IPs...) and tried the commands saposcol -c and saposcol -k but we cannot get the saposcoll run. Moreover, we haven't found any log information. The only log we (and SAP) could find is the one located in C:\WINDOWS\SapCluster\dev_coll.
    This log remain frozen at September 1st:
          SAPOSCOL version  COLL 20.95 700 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
          compiled at   Feb  3 2008
          systemid      562 (PC with Windows NT)
          relno         7000
          patch text    COLL 20.95 700 - 20.64 NT 07/10/17
          patchno       146
          intno         20050900
          running on    BL-SAP2 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Level 15 (Mod 65 Step 3)
    12:04:16 01.09.2008   LOG: Profile          : no profile used
    12:04:16 01.09.2008   LOG: Saposcol Version  : [COLL 20.95 700 - 20.64 NT 07/10/17]
    12:04:16 01.09.2008   LOG: Working directory : C:\WINDOWS\SAPCLU~1
    12:04:16 01.09.2008   LOG: Allocate Counter Buffer [10000 Bytes]
    12:04:16 01.09.2008   LOG: Allocate Instance Buffer [10000 Bytes]
    12:04:17 01.09.2008   LOG: Shared Memory Size: 71898.
    12:04:17 01.09.2008   LOG: Connected to existing shared memory.
    12:04:17 01.09.2008   LOG: MaxRecords = 575 <> RecordCnt + Dta_offset = 614 + 61
    12:04:22 01.09.2008 WARNING: WaitFree: could not set new shared memory status after 5 sec
    12:04:22 01.09.2008 WARNING: Cannot create Shared Memory
    Kernel Info:
    Kernel release    700
    Compilation        NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
    Sup.Pkg lvl.       146
    ABAP Load       1563
    CUA load           30
    Mode                opt
    Can anyone shed some light on the subject?
    Thank you very much and kind regards
    Edited by: Jose Enrique Sepulveda on Sep 6, 2008 2:10 AM

    Dear bhaskar:
    Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
    Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
    Does anyone knows if a reboot has solved this kind of problem in a similar situation?
    Thanks in advance
    José Enrique

  • Persistent Store Problems for MYSQL Enhanced Cluster With OpenMQ 4.4

    I am trying to implement an enhanced cluster with failover. I have edited the config files for each broker instance for a persistent store. I have appended the following to each of the config.properties files:
    imq.brokerid=myclusterinstanceINSTANCE1 # I substitute INSTANCE2 for INSTANCE1 for broker #2
    imq.persist.store=jdbc
    imq.persist.jdbc.dbVendor=mysql
    imq.persist.jdbc.mysql.property.url=jdbc:mysql://xxx.xxx.xxx.xx:3306/test
    imq.persist.jdbc.mysql.user=user1
    imq.persist.jdbc.mysql.needpassword=true
    imq.persist.jdbc.mysql.password=mypass
    imq.cluster.ha=true
    imq.cluster.clusterid=mycluster
    imq.cluster.brokerlist=xxx.xxx.xxx.x:37676,yyy.yyy.yyy.y:37676
    I then create the persistence storage with "imqdbmgr create tbl". When I view the data in the tables it creates, I have one row. Under Store_Version, I have 410. Under LOCK_ID, it has NULL. When I go to start the brokers with imqbrokerd, I get the following error:
    ERROR [B3198]: Error initializing cluster manager:
    com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4239]: Failed to load persistent store version from database table MQVER41Cmycluster
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:310)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.DBTool.updateStoreVersion410IfNecessary(DBTool.java:350)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.checkStore(JDBCStore.java:3599)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.<init>(JDBCStore.java:127)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at java.lang.Class.newInstance0(Class.java:355)
    at java.lang.Class.newInstance(Class.java:308)
    at com.sun.messaging.jmq.jmsserver.persist.StoreManager.getStore(StoreManager.java:157)
    at com.sun.messaging.jmq.jmsserver.Globals.getStore(Globals.java:967)
    at com.sun.messaging.jmq.jmsserver.cluster.ha.HAClusterManagerImpl.initialize(HAClusterManagerImpl.java:181)
    at com.sun.messaging.jmq.jmsserver.Globals.initClusterManager(Globals.java:903)
    at com.sun.messaging.jmq.jmsserver.Broker._start(Broker.java:777)
    at com.sun.messaging.jmq.jmsserver.Broker.start(Broker.java:410)
    at com.sun.messaging.jmq.jmsserver.Broker.main(Broker.java:1971)
    Caused by: java.lang.NullPointerException
    at com.mysql.jdbc.ResultSetImpl.findColumn(ResultSetImpl.java:1103)
    at com.mysql.jdbc.ResultSetImpl.getInt(ResultSetImpl.java:2777)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:298)
    ... 16 more
    I believe this error is attributed to the NULL value under LOCK_ID. I think that the value under LOCK_ID should be the name of the broker from the config file (even though I specified them in the config files). Any ideas?? THANKS!

    Just some pointers -- maybe this will be of use:
    If you haven't already read it, please take a look at the [ MySQL setup guide|https://mq.dev.java.net/OpenMQ_MySQLCluster_Setup_Guide.html] .
    We recommend using NDB Data-store of MySQL Cluster, though this isn't an absolute requirement. Due to some issues we have found with earlier versions, we recommend using MySQL Cluster, 7.0.9 or better (the current version is 7.0.16, or 7.1.5). Either of these would contain Connector/J.
    I'd also recommend using the latest version -- MQ 4.4update2 (just in case you happen to have an older copy). There were many minor improvements in the integration with MySQL from the original 4.4 release, to update 2. This is linked at the MQ download page: [https://mq.dev.java.net/downloads.html]

Maybe you are looking for

  • How to implement CO in DBM Environment

    pls let me know how to impelment the CO in DBM senario. How it is different from normal senario.

  • Peter Fabian from Ottawa – Wants to learn XML and SQL

    Hi There, I am Peter Fabian from Ottawa. I want to learn XML and SQL. I have basic knowledge of HTML. Please provide me necessary tutorial which can help me to learn XML and SQL. Thanks Peter Fabian

  • After deleting the preferences photoshop crashes

    I deleted the preferences on photoshop CS using keyboard shortcuts.on my PC, Windows 7.  Now it crashes when I open it.  How do I restore the preferences and hopefully get photoshop to run again?

  • Unwanted spacing between divs in IE

    I'm in the beginning stages of laying out a website in CSS and I have already ran into a problem. I have a "header" div and a "nav" div stacked directly on top of each other. When I test in firefox everything looks fine, but in IE there is a space th

  • Acrobat Pro XI trial destroyed Acrobat Pro X

    I downloaded the trail Acrobat Pro XI and it deleted by Acrobat Pro X. Due to company restrictions, I cannot purchase XI yet but need by X back after the trial ends. How do I get Acrobat X back when it's no longer available for download? Message was