Cluster resource going comatose because of CIFS

Hello,
I'm doing a rolling cluster conversion from Netware to OES 11. While
everything else works fine now, there are problems with cluster resources
which have CIFS enabled: they go comatose most every time when migrated or
switched online. But sometimes it works and the go online.
In the load.out file I see these lines:
"Adding a Virtual Server is
failed
Error: Unknown, error number: 168"
Any idea what goes wrong?
Thanks,
Mirko

Hi,
I did not monitor the cifs.log while doing all the testing and of course I
do not remember the exact times; but I think those are the lines when
everything is all right:
Mar 1 18:31:19 fs1 CIFS[13602]: EVENT: RPC: Received Mount Volume RPC:
volumeNumber: 245, status: 1088421891, volumeName: MI, volumeGUID:
3d0fe7d8-2412-01de-80-01-b64c16b714d4, poolName: MI, volumeMountPoint:
/media/nss/MI
Mar 1 18:31:22 fs1 CIFS[13602]: EVENT: CLI: AddServer : Adding virtual
server FDN .CN=FS1-2-MI.<OU_TREE_replaced> with IP <IP_replaced>
Mar 1 18:31:22 fs1 CIFS[13602]: EVENT: CLI: AddServer : Successfully added
virtual server FDN= .CN=FS1-2-MI.<OU_TREE_replaced>, netbios=
CLUSTER_FS1__MI,IP= <IP_replaced> comment = Cluster Virtual CIFS Server
And here is an example of lines were it failes were I again see the error
168:
Feb 27 17:45:30 fs1 CIFS[12956]: EVENT: RPC: Received Mount Volume RPC:
volumeNumber: 245, status: 1088421891, volumeName: MI, volumeGUID:
3d0fe7d8-2412-01de-80-01-b64c16b714d4, poolName: MI, volumeMountPoint:
/media/nss/MI
Feb 27 17:45:30 fs1 CIFS[12956]: EVENT: CLI: AddServer : Adding virtual
server FDN .CN=FS1-2-MI.<OU_TREE_replaced> with IP <IP_replaced>
Feb 27 17:45:30 fs1 CIFS[12956]: WARNING: CODIR: AllocateDirCacheEntry:
Invalid Patth /media/nss/MI/
Feb 27 17:45:30 fs1 CIFS[12956]: ERROR: CODIR: GetEntryFromDirCache: Failed
to allocate a dir cache entry
Feb 27 17:45:30 fs1 CIFS[12956]: WARNING: CODIR: Failed to find cache entry
for given path. status = 168
Feb 27 17:45:30 fs1 CIFS[12956]: ERROR: ENTRY: CIFSNDSReadFromNDS: Error
adding a new share (CIFSNDSPutSharePointInfo): 168
Feb 27 17:45:30 fs1 CIFS[12956]: CRITICAL: CLI: AddServer:
CIFSNDSReadFromNDS(): Unable to read attributes of .CN=FS1-2-
MI.<OU_TREE_replaced> from NDS, error = 168
Seems to be NDS related. But I don't think it's a general problem, because
sometimes it works. I think the tree is healty, iMonitor Treewide Report
reports everythink OK.
Thanks,
Mirko
ssivaramakrishna wrote:
>
> Mirko,
>
> If possible can we get a snapshot of /var/log/cifs/cifs.log file at the
> time when the issue was seen?
>
>

Similar Messages

Cluster resource goes comatose error 20892

Hi,
We've got a problem with 2 new cluster nodes, when trying to migrate a pol on to them the cluster resource goes comatose.
In the /var/opt/novell/log/ncs/ resource.load.out
we see an error 20892.
That is nss /poolact=res fails because the server thinks the resource is used by another cluster node. That is not the case.
I've read the TID about that error but there it was said that this issue is fixed with ncpserv later than Jan 10.
The node in question is OES2SP3 and ncpserv is 2.0.3-0.21 (May 2011).
If i do a "cluster status" it shows the resource running on another node, but wwhen I try and migrate the resource it goes comatose.
We are running a mixed cluster (4* NW6.5SP8, 1 OES2SP2 (which works), 2 OES2SP3 (don't work)).
Where to look next?
Regards,
Bettina

bkuhlmann wrote:
>
> Thank you for your responses. I solved the problem myself yesterday. The
> problem was that nss and afptcpd did not start correctly (skipped
> services on boot) and were restarted manually afterwards an that was the
> cause for the failing of the migration.
> I fixed the nss,afp problem by adjusting the settings in
> /etc/sysconfig/udev as mentioned in the docs.
> And after that the pool could be properly activated.
> Now the AFP binding leads to comatose resource but that is another
> problem (at the moment I think this binding is obsolete because in our
> testenvironment we dod not bind afp to the short resource name (AFPBIND
> ADD poolservername <ipaddress>) and our Macs use the DNS names of the
> servers anyway.)
> And, yes, we added LUNS and I fear we only "cluster leaved" the linux
> nodes and did not take them down...
>
> Regards,
> Bettina
> Bettina
>
>
I am trying to make sure I understand this. So you do not use the afpbind in
you cluster scripts and afp continues to work without issue? That just seems
strange that it would work. I will have to test this myself if I am
understanding you correctly.

The cluster resource 'SQL Server' could not be brought online error while in completion stage of sql server 2012 failover installation

While installing sql server 2012 with failover clustering I got the following error:
The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic failure. Status code: 5942. Description: The resource failed to come online due to the failure of one
or more provider resources.
The two nodes of the sql server failover have been successfully prepared. The error came while running the advance cluster completion option.
In the clustered events in failover cluster manager the following message is displayed:
Cluster resource 'SQL Network Name (CPCTestSQLClus)' of type 'Network name' in clustered role 'SQL Server (MSSQLSERVER)' failed.
I have done various checking and the issue remained. I tried to start the sql

Please find below part of the content of the cluster log. I hope this is helpful in resolving the issue:
00000998.000010e8::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online called for resource SQL Network Name (CPCTestSQLClus)
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 997/0.
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlineCallIssued -> OnlinePending( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlineCallIssued-->OnlinePending.
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Online thread
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Initializing config info
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Skipping initialization of 'Identity' module because netname is not yet created
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual online of resource.
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Obtaining IP info for resource SQL IP Address 1 (CPCTestSQLClus)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Using provider SQL IP Address 1 (CPCTestSQLClus), ip address 10.144.166.160, mask 255.255.255.0, prefix length 24
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Resource has 1 IPs
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: IP: Type Ipv4, Address 10.144.166.160:~0~, Prefix 10.144.166.160/24, Online true, Transport \Device\NetBt_If3
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Offline
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Calling initialize of the configuration implementation
000005a4.00001350::2013/05/08-20:45:00.248 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Creating a New AD NetName (type Singleton)...
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Closing
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Initializing Name: CPCTestSQLClus, NetbiosName: CPCTESTSQLCLUS, Type: Singleton, Created: false
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: [NNLIB] GetCreatingDC - name CPCTestSQLClus, lookup flags = 1
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NNLIB] GetDCWithFlags - using DC
\\MY01DC03.Domain.net, domain name Domain.net, IsReadOnly 0, Object exists 0
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NN] Setting crypto access members for encrypt. New container = false.
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: Agent: Sending request Netname/LastDcChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.452 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: LastDc Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting last DC in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: LastDc Changed (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: Agent: Sending request Netname/PasswordChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Password Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.468 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting password in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: PasswordChanged (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.00000ab8::2013/05/08-20:45:00.636 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.647 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.0000075c::2013/05/08-20:45:00.784 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OU name for VCO is OU=NewComputers,OU=WORKSTATIONS,DC=Domain,DC=net
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name: Agent: Sending request Netname/GetToken to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Identity
00000998.00000ab8::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Module is not yet initialized. Trying to obtain a new token.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining new token
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain Domain.net
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] PopulateKerbKDCLookupCache - DC flags 0
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 94, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain label Domain
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 86, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:01.018 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 0)
00000998.0000075c::2013/05/08-20:45:01.096 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 1)
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NNLIB] Logon failed for user CPCTestWinClus$ (Error 1326), DC
\\MY01DC02.Domain.net, domain Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining Windows Token for Name: CPCTestWinClus, SamName: CPCTestWinClus$, Type: Singleton, Result: 1326, LastDC:
\\MY01DC02.Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Slow Operation, FinishWithReply: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: InternalReplyHandler with event: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: End of Slow Operation, state: Error/Idle, prevWorkState: Idle
00000998.00000ab8::2013/05/08-20:45:01.096 WARN [RES] Network Name <Cluster Name>: Identity: Get Token Request, currently doesnt have a token!
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: End of Slow Operation, state: Initializing/Writing, prevWorkState: Writing
00000998.000010e8::2013/05/08-20:45:01.096 WARN [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Slow operation has exception ERROR_INVALID_HANDLE(6)' because of '::ImpersonateLoggedOnUser( GetToken() )'
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD): 6
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: InitializeReplyCreation of NetName (type Singleton), result: 6, IsCanceled: false
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Deleting ResourceData, CreatingDC, ObjectGUID for a newly created netname from cluster database
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration): 6
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 6
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: PerformOnline - Initialization of Configuration module finished with result: 6
00000998.000012f0::2013/05/08-20:45:01.112 ERR   [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online thread Failed: ERROR_SUCCESS(0)' because of 'Initializing netname configuration for SQL Network Name (CPCTestSQLClus) failed with
error 6.'
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: All resources offline. Cleaning up.
00000998.000012f0::2013/05/08-20:45:01.112 ERR   [RHS] Online for resource SQL Network Name (CPCTestSQLClus) failed.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 5018/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlinePending -> ProcessingFailure( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlinePending-->ProcessingFailure.
000005a4.0000050c::2013/05/08-20:45:01.112 ERR   [RCM] rcm::RcmResource::HandleFailure: (SQL Network Name (CPCTestSQLClus))
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] resource SQL Network Name (CPCTestSQLClus): failure count: 6, restartAction: 2 persistentState: 1.
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Greater than restartPeriod time has elapsed since first failure of SQL Network Name (CPCTestSQLClus), resetting failureTime and failureCount.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Will queue immediate restart (500 milliseconds) of SQL Network Name (CPCTestSQLClus) after terminate is complete.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): ProcessingFailure -> WaitingToTerminate( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [WaitingToTerminate to DelayRestartingResource] -> Terminating( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Terminate called for resource SQL Network Name (CPCTestSQLClus)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Offline thread
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual offline of resource.
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AdminShare
00000998.000010e8::2013/05/08-20:45:01.112 ERR   [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AdminShare: OnCloseBase, Error Already Closing, previous state: Closing/Ending
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare) result: 1904
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 1904
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Canceling work, state: Closing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: OnCloseBase, previous state: Initializing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closing... (PreviousState: Initializing, Created: false, Type: Singleton)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Canceling work, state: Closing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OnCloseBase, previous state: Initializing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Finish Closing NetName (type Singleton) Module AccountAD, result 0, remaining... 0 (0)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- listing 3 instances ---------------------------------------------
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 082d8ef5-62a8-4fee-acbc-e89b769e9181:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closed
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 43dec41b-661c-42a8-ae23-b635d7ab11f5:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: c03fb105-9a50-4d00-8bee-afaf693f7efc:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Initializing/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Error/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Initialized/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- 0 Zombie modules
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(7) result 0/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [Terminating to DelayRestartingResource] -> DelayRestartingResource( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] Queueing immediate delay restart of resource SQL Network Name (CPCTestSQLClus) in 500 ms.
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.143 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.252 INFO [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Netbios
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: Slow Operation, FinishWithReply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: End of Slow Operation, state: Initialized/Idle, prevWorkState: Idle

The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan M

Yes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M

SCVMM 2012 R2 RU3 - Live storage migration failing with error 12711 if cluster resource name is not in form of "SCVMM vmname "

At the end of live storage migration in SCVMM 2012 R2 RU3 getting error:
Error (12711)
VMM cannot complete the WMI operation on the server (hypervhost1.domain.local) because of an error: [MSCluster_Resource.Name="SCVMM test-vm"] The cluster resource could not be found.
The cluster resource could not be found (0x138F)
Recommended Action
Resolve the issue and then try the operation again.
Storage migration actually succeeds and after Repair/Ignore and Refresh, the VM shows up ok in VMM, with the VHD in new location.
If VM is offline, storage migration always succeeds. Live (non-storage) migration always succeeds.
I noticed in the error message that it searches for cluster resource name "SCVMM test-vm" and for some VMs I've got different cluster resource names.
Like for this VM cluster resource names are:
Virtual Machine test-vm
Virtual Machine Configuration test-vm
Furthermore, those resource names are showing up correctly in [VirtualManagerDB].[dbo].[tbl_WLC_VMInstance] table, columns VMResource and VMConfigResource.
Anyone knows why SCVMM keeps searching for "SCVMM test-vm" and how to fix this without recreating cluster resources?

Ok, you have the same problem and same configuration that this post:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/853c021f-dd0a-4d88-a7c1-72bb8d4d0591/hyperv-cluster-live-migration-does-not-work-anymore-after-ur5-installation?forum=virtualmachingmgrhyperv#b5ae914f-7b52-4cea-86ef-a64ce4b32bb0
This problem occurs will old and new vm?

Cluster resource 'SQL Network Name (SQLCLUS1)' of type 'Network Name' in clustered role 'SQL Server (DB1)' failed.

Cluster resource 'SQL Network Name (SQLCLUS1)' of type 'Network Name' in clustered role 'SQL Server (DB1)' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
I keep getting this error message. Can someone please help. Thank You.
Kranp.

Hi Kranp,
As the issue is more related to Windows Server high availability
, I recommend you post the question in the
Windows Server High Availability (Clustering)
forum. It is appropriate and more experts will assist you.
Besides, there are similar threads regarding to the above error for your reference.
2012 Cluster service name failing
SQL 2012 Failover Cluster - unable to start because
of 'Network Name' failed
Issues with resource creation on W2K12 SQL
failover cluster, confirm procedures
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

The cluster resource could not be brought online due to an error bringing the dependency resource

hello
i am tring to install sql 2012 sp1 clyutering on Windows server 2012. every thing is fine until a get this error
The cluster resource 'SQL Server (SQLCLUSTER)' could not be brought online due to an error bringing the dependency resource 'SQL Network Name (ST-SQLCluster)' online. Refer to the Cluster Events in the Failover Cluster Manager
for more information. i don,t have permision issue.
any help for this please
Kamel
KAMEL

Hello,
Please read the following post:
http://blogs.msdn.com/b/psssql/archive/2013/09/30/error-during-installation-of-an-sql-server-failover-cluster-instance.aspx
Try to run the cluster validation wizard too:
http://technet.microsoft.com/en-us/library/cc732035(v=WS.10).aspx#BKMK_how_to_run
More about this topic on the following thread:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/d217a651-1209-4300-904a-aefe0e05692c/network-name-not-going-online-during-install
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Cluster resource Hang

Hi
We have 3 Node Hyperv 2012 R2 Failover Cluster suddenly we face below error on one Node.
A component on the server did not respond in a timely fashion. This caused the cluster resource 'Virtual Machine Configuration (resource type 'Virtual Machine Configuration', DLL 'vmclusres.dll') to exceed its time-out threshold. As part of cluster
health detection, recovery actions will be taken. The cluster will try to automatically recover by terminating and restarting the Resource Hosting Subsystem (RHS) process that is running this resource. Verify that the underlying infrastructure (such as storage,
networking, or services) that are associated with the resource are functioning correctly.

Hi jingoi,
“Refer to the System event log to determine which resource and resource DLL is causing the issue” from the literal meaning of view we can get a cluster resource crash or not
responding, since the current information we can not determine which component may crash you can get the cluster log to determine which cluster resource has issue first.
Some folk meet this similar issue because they have not install the following update and got vmclusters.dll deadlock, please install them first then monitor this issue again.
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
https://social.technet.microsoft.com/Forums/windowsserver/en-US/fce9f196-0ac7-4456-87b3-f3de508231d7/cluster-resource-hang?forum=winserverClustering
October 2014 update rollup for Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2
http://support.microsoft.com/en-us/kb/2995388
More information:
Get-ClusterLog
https://technet.microsoft.com/en-us/library/ee461045.aspx?f=255&MSPPError=-2147217396
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cluster resource authorizations

Is there anyway to limit a role to only control specific cluster resource groups? I want to give application admins the capability to take their resource groups offline or switch nodes. If I add the solaris.cluster.admin authorization, it will still give them access to all resources even though I limit the commands that they can run. They can still use the clrg command to shutdown all resources.

Thanks Tim. I have actually done that. I have created a script to switch the resource from one node to the secondary node and gave the role access to this script. The script runs the clrg switch command for the specific resources. But to allow the role to run the script, I had to grant the role the solaris.cluster.admin authorization. Because of this, the role now can run the clrg switch from the command line. Am I missing something with this? Here are the pertinent info:
$ profiles ddradm
ASG Admin
ASG Commands
All
Basic Solaris User
$ grep ASG prof_attr
ASG Admin:::ASG Administrators:auths=solaris.cluster.admin;profiles=ASG Commands
ASG Commands:::ASG Admin Commands:
$ grep ASG exec_attr
ASG Admin:solaris:cmd:::/zones/rbac/asg/asg_switch_primary_bcp.sh:uid=0
ASG Admin:solaris:cmd:::/zones/rbac/asg/asg_switch_primary_prod.sh:uid=0
ASG Admin:solaris:cmd:::/zones/rbac/asg/asg_switch_primary_qa.sh:uid=0
If I did not grant the solaris.cluster.admin auth to the profile, the script fails when it tries to run the clrg switch command.

Solaris Cluster is going open-source!

I'm pleased to announce that Solaris Cluster is going open-source! Here are the
details:
Official announcement:
http://www.sun.com/featured-articles/2007-0627/feature/index.jsp?intcmp=hp2007jun27_cluster_read
We initiated a new HA Clusters community group on opensolaris.org: http://www.opensolaris.org/os/community/ha-clusters/
The Solaris Cluster source code base is called Open High Availability (HA) Cluster. See:
http://www.opensolaris.org/os/community/ha-clusters/ohac/
The Solaris Cluster code is released under the Community Development and Distribution License (CDDL). It is browsable via OpenGrog:
http://src.opensolaris.org/source/xref/ohac/
The first release, on June 27, contains the source for almost all the Solaris Cluster agents. The current list of open-source agents can be found at :http://www.opensolaris.org/os/community/ha-clusters/ohac/Documentation/open-agents/
We have also released the source-code for the Dataservices Automated Test Suite
(DATS), which tests the Solaris Cluster Agents code. DATS is part of the Solaris Cluster Automated Test Environment (SCATE).
CTI for TET, which is part of the SCATE test infrastructure, has been separately open-sourced on the testing community under the Artistic License. This framework supports both Solaris Cluster and ON test suites: http://www.opensolaris.org/os/community/testing/
We're committing to open-source the full Solaris Cluster product over the next 18 months, including the agents, core, Geographic Edition, test suites, and docs.
Check out the HA Clusters community (http://www.opensolaris.org/os/community/ha-clusters/) and the associated discussion group (http://www.opensolaris.org/jive/forum.jspa?forumID=195).
We are looking forward for contributions and engagement with the community!
Greetings
Thorsten

2.) The Chinese government found ways to listen in on Skype, and I'm sure others have too. The protocol is NOT secure.
It may not be the protocol, they have a different skype version, TOM Skype (if I'm not wrong if they try to open the skype page they get redirected there), which bundles or used to bundle an extra program that filtered forbidden words, but this was even before it got transmitted so the protocol doesn't matter (yet).
I guess they have also demanded for a way to eavesdrop on calls so maybe an extra something is added that will allow someone with the right keys to decrypt the communications (I'm thinking about something on the lines of mail encryption, you add the public key of the other person and your own public key so you can decrypt it later, if a third key is somehow added without your knowledge a third party can also decrypt it).
On the rest I have to agree, I'd like to use something that gets more regular updates and can be scrutinized by anyone but ... when you have contacts that use skype that have other contacts that also use skype .... you can't just say from now on I'll use just -insert name here- because skype is not really keeping up and force everyone else to change (even though some contacts don't really care what they use as long as it works well).

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

Cluster RESOURCE how can I get clusterowner (preferred Owner List) in readable mode from Powershell?

Hello,
I'm trying to list the Preferred Owner list of some cluster Resources, but we have many nodes and the output is not readable from powershell if I use the standard command but it shows somethink like {server1, server2,.....}
Then I've tried to get the output in table mode, but I don't know how to get it.
I'd like to have something like:
"Cluster Resource name" "PrefOwner1","PrefOwner2","PrefOwner3" .......
I've done
get-clusterresource
|
Where{$_.resourcetype
-match
"MyResourceType"}
|
get-clusterownernode | select clusterobject,,@{n='PrefOwners';e={$_.ownernodes
-join","}}
|ft-a
This code is working, but I would like to know if could do more easy or more simply.
Regards.

this is not the product/technical issue, for how to use script may you can post in
https://social.technet.microsoft.com/Forums/en-US/9d5a7990-b975-488a-b7c0-6d866f29cf0a/change-mouse-scheme?forum=ITCG

Cluster resource 'Analysis Services' of type 'Generic Service' in clustered role 'SQL Server' failed.

Windows Server 2012 R2
SQL Server 2012
After a recent cluster failover from node 1 to node 2, the Analysis Services role is in a failed state, with the service stopped. When attempting to start the service, there are two error messages captured in Failover Cluster Manager:
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          4/10/2014 11:48:49 AM
Event ID:      1042
Task Category: Generic Service Resource
Level:         Error
Keywords:
User:          SYSTEM
Computer:      HQ-HASQL-1.sbgnet.int
Description:
Generic service 'Analysis Services (HASQL)' failed with error '1067'. Please examine the application event log.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
    <EventID>1042</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>16</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
    <EventRecordID>26212</EventRecordID>
    <Correlation />
    <Execution ProcessID="9036" ThreadID="14748" />
    <Channel>System</Channel>
    <Computer>HQ-HASQL-1.sbgnet.int</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="ResourceName">Analysis Services (HASQL)</Data>
    <Data Name="Status">1067</Data>
</EventData>
</Event>
Log Name:      System
Source:        Microsoft-Windows-FailoverClustering
Date:          4/10/2014 11:48:49 AM
Event ID:      1069
Task Category: Resource Control Manager
Level:         Error
Keywords:
User:          SYSTEM
Computer:      HQ-HASQL-1.sbgnet.int
Description:
Cluster resource 'Analysis Services (HASQL)' of type 'Generic Service' in clustered role 'SQL Server (HASQL)' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
    <EventID>1069</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>3</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
    <EventRecordID>26213</EventRecordID>
    <Correlation />
    <Execution ProcessID="6464" ThreadID="9076" />
    <Channel>System</Channel>
    <Computer>HQ-HASQL-1.sbgnet.int</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="ResourceName">Analysis Services (HASQL)</Data>
    <Data Name="ResourceGroup">SQL Server (HASQL)</Data>
    <Data Name="ResTypeDll">Generic Service</Data>
</EventData>
</Event>
With just these generic error messages being present, this has been difficult to diagnose. Some research has yielded possible resolutions of the Event Viewer log being full, .NET corruption, missing registry entries, but none of those seem to be the issue
(Event Viewer logs cleared, Analysis services is working on the same physical servers in a different cluster, and the registry entries was only a supported issue for SQL Server 2008 and 2008 R2).
Any help would be greatly appreciated.

Bring up Configuration Manager, look at binary path for SSAS. Make sure BOTH folders exist. Sometimes with failovers mappings get screwed up.

Partner going mad because he's convinced I've tried to gain access to his iPad 4 . It's disabled for 5 mins after he entered the wrong passcode just once . Is this a glitch? I haven't touched it ! Please help?

Ok .... My partner is going mad because he is convinced I have tried to access his iPad 4. He typed in the wrong pass code just once and it has disabled itself for 5 mins leaving him convinced that I have tried to get into it . I haven't. He is really angry and I've done nothing . Now he has turned the wifi off and my kids can't play their xboxes .
Is this a glitch possible on ipad4?
What other possible causes are there?
The iPad has been banged screen down on hard surface a couple of times..... Could this attribute to the issue?
Please will someone answer me? He wont believe me and I haven't touched anything

If the iPad has been "banged down on hard surface" it is possible that just a touch of the screen, or coming near the screen, may have resulted in a false entry. Or it could be the kids.
Either way you need to dump your partner and get your kids out of that environment. Your partner has anger management issues and needs counseling.

Installation issue with a mounted cluster resource

Hello
given: SC 3.1 9/04 on Solaris 9 sparc
we run RSA Authentication Manager 6.0 on a 2 node cluster.
This is installed into /opt/ace - which is a storage cluster resource.
It's the fact that if I install the ACE into /opt/ace, then I take the storage cluster offline, I still can see all of the underlying ACE directories.
Under normal circumstances the directory should be empty, but it is not.
I don't know why.
ok, step by step
the directory is empty, and the resource is Online -
# scstat -g | grep ace
Resources: ace-rg              ace-stor-res
     Group: ace-rg              pixtest1            Online
     Group: ace-rg              pixtest2            Offline
Resource: ace-stor-res        pixtest1            Online    Online
Resource: ace-stor-res        pixtest2            Offline   Offline
# ls -la /opt/ace
total 2
drwxrwx--x 2 ppark ppark 512 Oct 14 15:39 .
drwxr-xr-x 44 root sys   1024 Oct 14 12:51 ..The ace resource properties are defined like -
# scrgadm -pv |grep ace
Res Group name:                                    ace-rg
(ace-rg) Res Group RG_description:               <NULL>
(ace-rg) Res Group mode:                         Failover
(ace-rg) Res Group management state:             Managed
(ace-rg) Res Group RG_project_name:              default
(ace-rg) Res Group RG_affinities:                <NULL>
(ace-rg) Res Group Auto_start_on_new_cluster:    True
(ace-rg) Res Group Failback:                     False
(ace-rg) Res Group Nodelist:                     pixtest1 pixtest2
(ace-rg) Res Group Maximum_primaries:            1
(ace-rg) Res Group Desired_primaries:            1
(ace-rg) Res Group RG_dependencies:              <NULL>
(ace-rg) Res Group network dependencies:         True
(ace-rg) Res Group Global_resources_used:        <All>
(ace-rg) Res Group Pingpong_interval:            3600
(ace-rg) Res Group Pathprefix:                   <NULL>
(ace-rg) Res Group system:                       False
(ace-rg) Res name:                               ace-stor-res
    (ace-rg:ace-stor-res) Res R_description:
    (ace-rg:ace-stor-res) Res resource type:       SUNW.HAStoragePlus:2
    (ace-rg:ace-stor-res) Res type version:        2
    (ace-rg:ace-stor-res) Res resource group name: ace-rg
    (ace-rg:ace-stor-res) Res resource project name: default
    (ace-rg:ace-stor-res) Res enabled:             True
    (ace-rg:ace-stor-res) Res monitor enabled:     TrueThen I install the ACE server into /opt/ace -
# /var/spool/software/ace6.0/aceserv/sol/sdsetup -primary -f ppark -p /opt -r no
(output omitted)
...The installation creates a few directories in the proper position -
# ls -l /opt/ace
total 9
drwxrwx--x 6 ppark ppark 1024 Oct 14 15:41 data
drwxrwx--x 2 ppark ppark 512 Oct 14 15:41 doc
drwxrwx--x 5 ppark ppark 4608 Oct 14 15:41 prog
drwxrwx--x 3 ppark ppark 512 Oct 14 15:41 rdbms
drwxrwx--x 8 ppark ppark 1024 Oct 14 15:41 utilsNow I take the resource offline, and to my surprise, I see the same directories beneath -
# scswitch -F -g ace-rg
# scstat -g |grep ace
Resources: ace-rg              ace-stor-res
     Group: ace-rg              pixtest1            Offline
     Group: ace-rg              pixtest2            Offline
Resource: ace-stor-res        pixtest1            Offline   Offline
Resource: ace-stor-res        pixtest2            Offline   Offline
# ls -l /opt/ace
total 9
drwxrwx--x 6 ppark ppark 1024 Oct 14 15:41 data
drwxrwx--x 2 ppark ppark 512 Oct 14 15:41 doc
drwxrwx--x 5 ppark ppark 4608 Oct 14 15:41 prog
drwxrwx--x 3 ppark ppark 512 Oct 14 15:41 rdbms
drwxrwx--x 8 ppark ppark 1024 Oct 14 15:41 utils
# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/md/dsk/d100      5.6G 4.4G 1.2G 80% /
/dev/md/dsk/d105       41G   23G   18G 58% /var
swap                  2.0G 176K 2.0G   1% /var/run
swap                  2.0G 440K 2.0G   1% /tmp
/dev/md/dsk/d104      3.9G 1.3G 2.6G 35% /opt
/dev/md/dsk/d107       15G 208M   15G   2% /opt/oracle
/dev/md/dsk/d106      963M   23M 883M   3% /global/.devices/node@1
/dev/md/log-set/dsk/d6
                       12G 6.6G 5.2G 57% /var/tmp/log
/dev/md/car-set/dsk/d5
                      9.9G 7.9G 1.9G 82% /opt/carConnect
/dev/md/jboss-set/dsk/d7
                      6.9G 377M 6.5G   6% /opt/jboss
/dev/md/ppark-set/dsk/d4
                      7.9G 5.8G 2.1G 74% /opt/ppark
/dev/md/dsk/d206      943M   23M 865M   3% /global/.devices/node@2
#* why that * ??
-- Nick

a more detailed output of the ace resource property -
# scrgadm -pvv |grep ace
      (SUNW.gds:5:Log_level) Res Type param description: Determines the log level for event based traces
      (ppark-rg:bankd-res:Log_level) Res property description: Determines the log level for event based traces
      (ppark-rg:oadm-res:Log_level) Res property description: Determines the log level for event based traces
      (ppark-rg:ebox-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-ws-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-3beg-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-btv-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-bks-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-obk-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:apache-res:Log_level) Res property description: Determines the log level for event based traces
      (squid-rg:squid-res:Log_level) Res property description: Determines the log level for event based traces
Res Group name:                                    ace-rg
(ace-rg) Res Group RG_description:               <NULL>
(ace-rg) Res Group mode:                         Failover
(ace-rg) Res Group management state:             Managed
(ace-rg) Res Group RG_project_name:              default
(ace-rg) Res Group RG_affinities:                <NULL>
(ace-rg) Res Group Auto_start_on_new_cluster:    True
(ace-rg) Res Group Failback:                     False
(ace-rg) Res Group Nodelist:                     pixtest1 pixtest2
(ace-rg) Res Group Maximum_primaries:            1
(ace-rg) Res Group Desired_primaries:            1
(ace-rg) Res Group RG_dependencies:              <NULL>
(ace-rg) Res Group network dependencies:         True
(ace-rg) Res Group Global_resources_used:        <All>
(ace-rg) Res Group Pingpong_interval:            3600
(ace-rg) Res Group Pathprefix:                   <NULL>
(ace-rg) Res Group system:                       False
(ace-rg) Res name:                               ace-stor-res
    (ace-rg:ace-stor-res) Res R_description:
    (ace-rg:ace-stor-res) Res resource type:       SUNW.HAStoragePlus:2
    (ace-rg:ace-stor-res) Res type version:        2
    (ace-rg:ace-stor-res) Res resource group name: ace-rg
    (ace-rg:ace-stor-res) Res resource project name: default
    (ace-rg:ace-stor-res) Res enabled:             True
    (ace-rg:ace-stor-res) Res monitor enabled:     True
    (ace-rg:ace-stor-res) Res strong dependencies: <NULL>
    (ace-rg:ace-stor-res) Res weak dependencies:   <NULL>
    (ace-rg:ace-stor-res) Res restart dependencies: <NULL>
    (ace-rg:ace-stor-res) Res property name:       Retry_interval
      (ace-rg:ace-stor-res:Retry_interval) Res property class: standard
      (ace-rg:ace-stor-res:Retry_interval) Res property type: int
      (ace-rg:ace-stor-res:Retry_interval) Res property value: 300
    (ace-rg:ace-stor-res) Res property name:       Retry_count
      (ace-rg:ace-stor-res:Retry_count) Res property class: standard
      (ace-rg:ace-stor-res:Retry_count) Res property type: int
      (ace-rg:ace-stor-res:Retry_count) Res property value: 2
    (ace-rg:ace-stor-res) Res property name:       Failover_mode
      (ace-rg:ace-stor-res:Failover_mode) Res property class: standard
      (ace-rg:ace-stor-res:Failover_mode) Res property type: enum
      (ace-rg:ace-stor-res:Failover_mode) Res property value: SOFT
    (ace-rg:ace-stor-res) Res property name:       MONITOR_CHECK_TIMEOUT
      (ace-rg:ace-stor-res:MONITOR_CHECK_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:MONITOR_CHECK_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:MONITOR_CHECK_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       MONITOR_STOP_TIMEOUT
      (ace-rg:ace-stor-res:MONITOR_STOP_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:MONITOR_STOP_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:MONITOR_STOP_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       MONITOR_START_TIMEOUT
      (ace-rg:ace-stor-res:MONITOR_START_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:MONITOR_START_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:MONITOR_START_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       UPDATE_TIMEOUT
      (ace-rg:ace-stor-res:UPDATE_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:UPDATE_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:UPDATE_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       VALIDATE_TIMEOUT
      (ace-rg:ace-stor-res:VALIDATE_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:VALIDATE_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:VALIDATE_TIMEOUT) Res property value: 1800
    (ace-rg:ace-stor-res) Res property name:       STOP_TIMEOUT
      (ace-rg:ace-stor-res:STOP_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:STOP_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:STOP_TIMEOUT) Res property value: 1800
    (ace-rg:ace-stor-res) Res property name:       START_TIMEOUT
      (ace-rg:ace-stor-res:START_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:START_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:START_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       FilesystemCheckCommand
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property class: extension
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property description: Command string to be executed for file system checks
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property type: stringarray
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property value: <NULL>
    (ace-rg:ace-stor-res) Res property name:       GlobalDevicePaths
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property class: extension
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property description: The list of HA global device paths
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property type: stringarray
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property value: <NULL>
    (ace-rg:ace-stor-res) Res property name:       FilesystemMountPoints
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property class: extension
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property description: The list of file system mountpoints
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property type: stringarray
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property value: /opt/ace
    (ace-rg:ace-stor-res) Res property name:       AffinityOn
      (ace-rg:ace-stor-res:AffinityOn) Res property class: extension
      (ace-rg:ace-stor-res:AffinityOn) Res property description: For specifying affinity switchover
      (ace-rg:ace-stor-res:AffinityOn) Res property type: boolean
      (ace-rg:ace-stor-res:AffinityOn) Res property value: TRUE

Cluster resource going comatose because of CIFS

Similar Messages

Maybe you are looking for