Cluster validation stating an update needs to be installed, but when checked, it's installed...Answers???

I'm setting up a simple, two node, cluster in Server 2012R2. When doing the Validation test it states that the updates on one of my nodes is not up to date. However, upon further investigation, I've found that most, if not all, updates the
test is telling me needs to be installed are installed. I have two other clusters that are set up the same way, the validation test came up good across the board and they have linked up nicely, but this one will not perform correctly. The only
difference between the three is the updates showing out of sync on the one cluster. Any help would be greatly appreciated.

Hi,
So the Clusters are fully patched and also running UR1 and did a reboot ?
and the updates are installed as shown in the update manger list.
what you could do is stop the Update service and delete the C:\Windows\SoftwareDistribution folder.
When starting the services it will recreate the folder ;-) then reboot the cluster and start validation.
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

Similar Messages

HT4623 I followed the directions to install the IOS 7.0.6 update to my Ipad Mini, but when I click on install and agree to terms & conditions, it says it is unable to verify the update because I am no longer connected to the internet. Not true. Help.

I followed the directions to install the IOS 7.0.6 update to my Ipad Mini, but when I click on install and agree to terms & conditions, it says it is unable to verify the update because I am no longer connected to the internet. Not true. Help.

Ok, got it now. I turned the Mini off and rebooted. Seems to be working fine now.

I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad?

Trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.

iTunes version 10.7 requires at least Mac OS X version 10.6.8 if you're running a Mac, or Windows XP Service Pack 2 or later if you're running Windows.
Is your computer up-to-date enough for iTunes 10.7?

HT201413 Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

Did you try removing and reinstalling all the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

I was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wnt turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there

i was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wont turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there

Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device

TS1702 my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as

my ipod & itunes are fully up-to-date with 4.2.1 for ipod and the itunes 11.0.1 and every app (ex facebook & ice cream jump says i need 4.3 version but when i click all updates say its all up to date. I have tryed restoring it 4 times to factory as well. Please help I have set-up over 10 ipods and differents generations and have never had this issue like this, I even have all ratings ristriction unchecked and payment info in itunes so i need help please

but i could download on others ipods in same gen, facebook and ice cream tower, everything i look up and try install always says that for apps so your saying that i can not ever download any apps to this ipod ever againÉ

I have a problem, i bought lion but when i want to install he said me i need to "download osx lion server" i'm running with the last lion beta. how to update please?

i have a problem, i bought lion but when i want to install he said me i need to "download osx lion server" i'm running with the last lion beta. how to update please?
ps: sorry for my english :S

You apparently are using a version of OS X you did not purchase using your Apple ID. Although you can download Mavericks you cannot install it over your current system. You must repartition your hard drive, then reinstall the version of OS X originally installed when it came new from the factory. That would be on the installer discs that should have come with the computer. If the computer did not come with discs from the factory but OS X was pre-installed (Lion or Mountain Lion) then you can perform an Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I have a macbook 13in mid 2010, im trying to update it from 10.6.4... i update it and restart i but when it finishes restarting, it says its still 10.6.4 and i need to update? please help!

I have a macbook 13in mid 2010, im trying to update it from 10.6.4... i update it and restart i but when it finishes restarting, it says its still 10.6.4 and i need to update? please help!

Try downloaded the Mac OS X 10.6.8 Update Combo v1.1 standalone updater and installing it.

HT201210 I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad.

HT201210 my iphone says it needs to be restored but when i try to restore it it says it cant be restored and theres an unkown error

My iphone says it needs to be restored but when i try to restor it it says it cant be restored and it has an unknown error

Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[01:41:37.0017]    Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[01:41:37.0017]       Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[01:41:37.0017]          Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[01:41:37.0017]             Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[01:41:37.0017]                Depth:5 Error:Exception at :0:
[01:41:37.0017]           - kBBUReturnTimedOut(8)/16: Pinging timed out
what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
This is the line of the log that appears and when the restoration is correct:
amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
Regards.

I have updates for iMovie and iPhoto but when i try to update them i'm told To update this application, sign in to the account you used to purchase it." even though i bought it and it is on my iMac!

I have updates for iMovie and iPhoto but when I try to update them through App Store I'm told that "To update this application, sign in to the account you used to purchase it." even though I bought it and it is on my iMac! Any suggestions on what I need to do?

Hi...
Delete both apps using this utility > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
That will delete the apps and all associated files.
Then re download the apps. That will download the most recent version updates included.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

Trying to update iTunes 10.5.2 my mac book air keeps telling me that it is installed but when i plug my new iPad and iPhone it keeps saying it has only 10.3 iTunes can anyone help?

I m trying to update iTunes 10.5.2 my mac book air but it keeps telling me that it is installed but when i plug my new iPad and iPhone it keeps saying it has only 10.3 iTunes and it needs at least 10.5 version can anyone help?

no that does seem to work it is as if it is not recognising it. it says installed on screen but when plug new ipad and iphone4s in it says new version required but i have ran a system update and it says everything is updated

I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot. After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Cluster validation stating an update needs to be installed, but when checked, it's installed...Answers???

Similar Messages

Maybe you are looking for