Cluster view events (where we can change the data)

Hi All,
I want to generate the number of specifiec field of table in the cluster view maintainance. Does anyone know the event to be used for this in the cluster events?
Thanks.
Regards,
ATUL.

Yes, basically when i maintain some data in one of the table in the cluster view, i want data for specific field say POS_NR should be generated automatically and not manually.
Regards,
ATUL.

Similar Messages

Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

Hi! You can't do it without jailbraek. And I offer you "don't try it"!

The area on my toolbar where you can change the white balance mode is now gone from my toolbar. How can I get it back?

The area on my toolbar where you can change the white balance mode is now gone form my toolbar. How can I get it back?

Your basic panel must have been accidentally deselected.
Simply right-click on one of the other panels e.g. Tone Curve and choose basic again - see image below.
You can also select solo mode, if you prefer to work in one panel at a time with the others collapsing automatically when you click on another tab.

I have a Windows Server 2008 R2 system. I am using Adobe Acrobat XI Pro. I am looking for the place where I can change the default font from Minion Pro to Calibri? Tools, Content Editing, Formatting

I have a Windows Server 2008 R2 system. I am using Adobe Acrobat XI Pro. I am looking for the place where I can Change the Default font from Miinion Pro to Calibri?
Tools, Content Editing, Formatting

You can't change it.
On Tue, Jan 13, 2015 at 11:22 AM, tonywaidmann <[email protected]>

HT201303 Please help me to check my acc: i cannot find where i can change the question security.

i cannot find the button which i can change the question surcurity. please help me
<Email Edited by Host>

http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

Where we can see the data?

Hi All,
I am working on the XML form Builder. I have created the XML form. i have entered the data and save it. But Where I can see the saved data. Can any one help me regarding this.
Thanks in Advance.

Hi Kannan,
This forum must be helpful.
Re: How to find path of a project created in XML form builder?
Regards,
Shankar

HT204655 How I can change the date of several pictures in the same Moment?

I can't change the date of a group of picture in the same Moment.

Select the Photos. Image Menu -> Adjust Date and Time.

Can someone tell me how/where I can change the email address where Forum alerts are directed?

I have changed my email address at the office, and I can no longer see the alerts sent from the forums.
I have seen some forum posts indicating I should go to My Settings, but I cannot see where to start that flow.
Is it even possible to change the target email address for forum alerts?
Thanks
.......Cameron
Cameron Conacher

In the forums you should see "Quick Access" at the top left of most pages. If not, click the small arrow at top left to expand the left rail. You can then click "Quick Access" and select "My Settings". You can see what I'm talking about in the first
few images in this Wiki article:
http://social.technet.microsoft.com/wiki/contents/articles/8739.msdntechnet-forums-how-to-add-a-forum-to-my-forums.aspx
In "My Settings" there are fields for you to enter your email address for forum alerts. Does this help?
Richard Mueller - MVP Directory Services

I no longer have the sync window on my computer where I can change the setting to sync my Iphone or Ipad

I used to have a window where I can choose what to sync on my windows laptop. Now when I open Itunes I get a window for music only so I can no longer sync my contacts, calendar, notes, etc. to my Iphone or Ipad What happened?

Assuming you're using iTunes 11, when the iPhone is connected to iTunes it will show at the top right just next to the iTunes Store button. Also by pressing Ctrl+S to Show Sidebar you will find the device in the same place it was in iTunes 10

How canI change the date format from mm/dd/yyyy to dd/mm/yyyy in FirefoxOS?

I have just received and am trying out things my new Alcatel Fire E with FirefoxOS 2.0.0.0 (just updated).
It is usual in most operating systems to be able to customize the date and time settings (amongst other things). After a few fruitless hours fiddling with the phone and checking various forums, I've come to the conclusion that this is currently not possible on my phone with this version of FirefoxOS. Or have I simply missed something?
Achim

''mohd.afzal97 [[#answer-710207|said]]''
<blockquote>
Can u please me the method of updating phone to 2.0
</blockquote>
Since I don't have the old version anymore, the following might not be 100% accurate. Note that my device is in English.
Go to the Settings app and select "Device information". You can either choose "Check now" or select "System Updates" and then "Check for Updates". If there is an update available you'll be notified. What it won't tell you is which version the new one is, at least I did not recieve that information. I thoughT I was updating to 1.4.x, not 2.0.
You should be given the choice to either update or not. You can ignore the update if you want (like if you don't have the time, or something.
A couple of words of warning:
1. Make a backup of any important data first.
2. It takes quite some time to download all the update data and this might bust your limit depending on what your service provide allows. I avoided this by doing the update whilst connected to a WLAN (also known as WiFi) which has no data restriction. This can be set in "Check for Updates > Settings".
Hope that helps.
Achim

Does Apple accept ideas from others for updates on the iPhone? I think it would be cool to have an update where we can change the font on our phone

It would be awesome if we could personalize our phone!

No, they don't. If you wish to, you can provide feedback at Apple Feedback.

Can change the price in the PO line item

Hello experts,
I have this Purchase order document where I can change the price in the PO line item(ME22N) where as in the other PO that I have created, changing the price in ME22N is not possible(shaded). They are all the same document type and plant combination. For the PB00 condition type configuration, It is set to D- not possible to process manually.
Please help.

Thanks for your answer. Yes i am aware of that, basically the settings is what the price indicated in the info record and as long it is included in the validty periiod then when you create the PO, that price will be detected by the system. i am clear for that, my issue is why there are some materials that i can change the price in the PO directly while the others are the pricing tab is disabled(cannot change the price)
Settings in the SPRO-MM - PURHASING- CONDITIONS-DEFINE PRICE DETERMINATION PROCESS- DEFINE CONDITION TYPES PB00 is D(NOT POSSIBLE TO PROCESS MANUALLY) but stilll the system is showing some PO's that can be changed the price

Can i change the dates of my photo's?

Hello, I took some photo's with my pentax camera but didn't notice that it had the wrong date on them. Which meant that when i imported into iphoto it shows them in the worng chronological order.
Is there any way i can change the date on the photo's???

Hi there,
You should be able to change the date in the source column (left column, bottom). I've done this and seems to work. It does rearrange items as dates are changed both in the library and in the iPhoto folders...
BTW - I use 'Film Rolls' view...
Good luck, Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Where Does iPhoto Get The Date?

I'm not sure I understand where iPhoto is getting the information for a photo's Date.
Is it coming from the photo's metadata?
If so, which field?
I have scanned old photo and I want iPhoto to show the Data that they were originally taken, not when they were scanned. I've used both Aperture and Adobe Lightroom to change the created date, but iPhoto seems to be using the date the photo was scanned.

I scanned the photo. I used Lightroom to modify the photo, including changing the capture time and date.
When I view the photo's metadata in Adobe Bridge, it shows the correct/new date that I entered in Lightroom.
But, when I import that photo into iPhoto, iPhoto shows the date as today. That seems odd. Today is not the date the photo was scanned. And it's not using the data I modified in the metadata.
That is because
iPhoto uses the date in the EXIF fields - if there is none then it uses the file date
I know I can change the date inside iPhoto, but I was hoping to change the date in the photo's metadata, so that now matter who or how someone looks at the photo it will have the correct creation date.
And this is how you do that
You can change the date in iPhoto using the batch change command (photo menu ==> batch change ==> time/date)
Then export the photo
I don't know how iPhoto's data change feature works, but if it's like the name/title change feature, then I wouldn't want to use it.
That is totally up to you - it is the only way to change the date using iPhoto
my wife renamed a bunch of photos in her iPhoto. Then she emailed them to someone and found out that the file name didn't change. The title changed.
That is correct - you can export the photos using the title as the file name (among other options)
I'm not sure why iPhoto would change a title as opposed to the actual file name.
Because iPhoto is a database based photo manager - not a file manager
Or at least have the option to pick what you wanted.
It does - the export command
LN

Changing the Data source in Business Objects XI

Hi,
Is it possible to change the data source(not universe) in runtime to generate business objects reports. I am using BOXI 3.1.
Below is the code I am using to change the universe in runtime. I would like to change this so that i can change the data source instead of changing the universe. My intention is to generate report from multipple database using same universe. Right now I am using multipple universes connected to multiple datasources to achieve this. I am using Report Engine SDK(Java).
           if("Webi".equals(mDocKind))
               // Added for multiple database support
               DataProviders dataProvs = documentInstance.getDataProviders();
            try{
                //To support multiple queries in BO reports
             for(int count=0;count<dataProvs.getCount(); count++){
               DataProvider dp=dataProvs.getItem(count);
               DataSource ds= dp.getDataSource();
               infoUniverseObjects = getUniverseObject(infoStore,NewUniverseName);
               infoUniverseObject = (IInfoObject)infoUniverseObjects.get(0);
               String newDsCuid = infoUniverseObject.getCUID();
               dataProvs.changeDataSource(ds.getID(), "UnivCUID=" + newDsCuid, true);
               if(dataProvs.mustFillChangeDataSourceMapping())
                    // Re-map data source to target Universe objects
                    ChangeDataSourceMapping mapping = dataProvs.getChangeDataSourceMapping();
                    ChangeDataSourceObjectMapping[] maps = mapping.getAllMappings();
                    dataProvs.setChangeDataSourceMapping();
                }//for dataProvs.getCount()
            }catch(Exception e)
                  mLogger.info("BOReportObject","createReport","Inside multiple data providers loop"+e.getMessage());
Thanks in advance
Shameer
Edited by: Shameertaj on May 20, 2009 3:08 AM

Hi Shameer,
I think this is only possible with the Universe Designer SDK (which is only available in COM).
Please kindly refer to the API reference for the Universe Designer SDK for more details:
http://help.sap.com/businessobject/product_guides/boexir31/en/bodessdk.chm
Also, please note that changing the universe connection when viewing a document on-demand is not recommended because this could lead to possible issues.
For example:
Two users trying to view documents that uses the same universe at approximately the same time.
But user A wants to use connection X and user B wants to use connection Y.
This could lead to an error while openning the document or while refreshing/retrieving the the data.
Hope this helps.
Regards,
Dan

Cluster view events (where we can change the data)

Similar Messages

Maybe you are looking for