Clusterd lvm with Oracle VM

Hello Everyone,
We are running OracleVM, I have 3 oracle database servers on the oracle vm cluster. I am wonder ing if there is any problem with setting up clvmd on the Oracle VM servers so that I could create an logical volume for each server and partition that for my ASM disk.
Currently I present a LUN from the SAN to the cluster and then map that disk to the vm's. However you begin to get quite a few disk presented to the vm cluster. Since the SAN is an EVA using all disk for all luns I would be able to present a large lun to the cluster and just break that up in to logical volumes that could be presented to the vm's. Less administration and better usage of disk on the SAN.
Is anyone using clvmd with there cluster and did you have any issues getting it configured on the Oracle VM environment.
Thank you in advance,
Mark

Hi,
We are using ocfs2 to achieve the same result.
This is supported right ?
In the 2.1.2 version OCFS2 doesn't support sparse files, nor snapshots (reflink), but anyway it allows clustered usage of the same space.
I would like to know is this configuration supported (and certified) ? I see that for RAC (running in virtual machines ) it might not be certified, but anyway I would like to have some input.
Regards,
Mihail
Edited by: user10919162 on Apr 29, 2010 4:59 AM

Similar Messages

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Install Solution Manager in RedHat Enterprise 6 with Oracle 11

Hello ,
In the marketplace-PAM, RedHat Enterprise 6 is not listed as approved for EHP1 Solution Manager 7.0 64 bit (unicode) with Oracle.
Does anyone have any information on this subject?
Has anyone installed the Solution Manager 7.0/Oracle with RedHat Enterprise 6?
tks

Yes, you are correct. Apart from PAM, following Note confirms this. RHEL 6 is not supported yet for Oracle, is in planning stage.
Note 1565179 - SAP software and Oracle Linux
Thanks

Unable to boot bankapp servers with Oracle 8.1.7 in windows2000

Hello,I tried to run bankapp examples with oracle 8.1.7 in windows2000. But when
I booted the servers using tmboot, there are some errors.(1)I used the following
RM entries:Oracle_XA;xaosw;D:\Oracle\Ora81\precomp\lib\msvc\oraSQL8.lib D:\Oracle\Ora81\precomp\lib\msvc\oraSQX8.lib
D:\Oracle\Ora81\RDBMS\xa\ORAXA8.lib (2)The OPENINFO string in the ubbshm file
is:DEFAULT:TMSNAME=TMS_ORA TMSCOUNT=2 LMID=SITE1
BANKB1 GRPNO=1 OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=100+LogDir=.+MaxCur=5"(3)the
follow is the error message when I booted the servers:
.. 174841.GLOBALDB!BALC.852.2572.0: 07-26-2001: Tuxedo Version 8.0 32-bit Windows.
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:262: INFO: Standard main starting
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open
returned XAER_RMERR
174841.GLOBALDB!BALC.852.2572.0: tpsvrinit: failed to open database due to
174841.GLOBALDB!BALC.852.2572.0: tpopen failed, tperrno: 16
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
174841.GLOBALDB!tmboot.480.548.-2: CMDTUX_CAT:825: ERROR: Process BALC at SITE1
failed with /T tperrno (TPERMERR - resource manager error) ...
Can anyone help? Thanks a lot!
Best Regards
Lily

I found the answer myself in an earlier post.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Reports Team:
Reports 6i will connect to Oracle8i, however you need to connect over Net8 - i.e. on the database side, you need to set up the TNS listener to accept connections, and on the Reports side (which, incidentally, needs to be installed in a separate Oracle_home) you need to configure the tnsnames.ora file to connect to the 'remote' database (since it is in a different oracle_home, to all intents and purposes it may as well be on another machine - it's all considered 'remote').
Regards
The Oracle Reports Team http://technet.oracle.com <HR></BLOCKQUOTE>
null

Registering a Partner application with Oracle SSO 10gR2

Hi Everybody
I'd like to ask a question around registering a partner application with Oracle SSO.
I have entered my home_url, logout_url and cancel_url e.g. home_url is https://vevopuitest1.co.uk/vevo_test1 and so on for the other fields.
When I save the details some information is automatically created e.g. Site Id, Site Token etc.
The bit that I am particularly interested in are the fields Single Sign-On URL and Single Sign-Off URL.
For my purposes these fields are respectively: https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_login and https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_logout
My questions are:
1. Where do these values come from?
2. Can I view them anywhere, say, in Oracle Directory Manager or using ldif queries?
I would like to be able to verify these values.
Many Thanks
Andy

I'm afraid this won't answer your question completely, but AFAIK in principle it does not matter on which machine SSO is running, as long as it passes the user id and credentials properly through the HTTP Header. Even more: in practice it is very common to have SSO running on a different machine than where your app runs.
So what I would do is find out how to use ADF Faces with SSO. Perhaps someone else can provide pointers on that.
Jan Kettenis

Forms 6.0 how to query clob column with oracle 9.2 DB

hi every body,
i made install for oracle 9.2 oracle DB every thing goes ok but when i made query in my form version 6.0 which have CLOB column the form closed automatically without any message?
and just for know when i run the same form with oracle 8.1.7 DB the form made query normally without any problem.
i want your help please.
Message was edited by:
mshaqalaih

I know there was a problem in 6i where you would get a crash if your query returned more than {Max Length} characters of the field representing the CLOB column.

Using Java Access bridge (Accessibility) with oracle forms 6.0 client

I'm trying to use JAB (java Access bridge ) to capture events in oracle forms 6.0 client .
I've a Jinitiator 1.1.8 and JRE version 1.4x
I've configured JAB as per the installation guide . However the events don't surface in Java Monkey .
Has anybody encountered similar issue ? what is the solution for the issue ??
Also on one of the forums I read Jinitiator 1.3x and above is automatically recognised by Java Access bridge .
For jinitiator version less than 1.3 manual configuration is required . however I haven;'t been able to find any on the oracle forms KB
Also here is the excerpt from the link http://www.oracle.com/us/corporate/accessibility/faqs/index.html
Q: Are there special steps for using Java-based applications with assistive technology?
A: If the Oracle application is written in Java, such as JDeveloper or Oracle Forms (runtime), customers must first install the latest version of Sun's Java Access Bridge. The Java Access Bridge provides the integration with screen readers such as JAWS or SuperNova that support Java. You just download the Access Bridge and install it. Sun's AccessBridge 2.0x recognizes Oracle's JInitiator 1.3x and above so no manual configuration steps are necessary. The Access Bridge is available from: http://java.sun.com/products/accessbridge. At the time this document was written, Access Bridge 2.0.1 is the most current publicly available production release; Oracle recommends upgrading to this version. Sun's AccessBridge is bundled with Oracle Universal Installer (OUI) and can be found in the Java Runtime Engine (JRE). More information for configuring such products is in the respective product documentation, or on http://www.oracle.com/us/corporate/accessibility/products/index.html.
Edited by: 974810 on 4 Dec, 2012 1:10 AM

ODP.NET requires Oracle Client 9.2 or higher.
You can find additional information about ODP.NET from the FAQ:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html
and the ODP.NET homepage:
http://www.oracle.com/technology/tech/windows/odpnet/index.html
Hope that helps,
Mark

Using long vs. clob datatype with Oracle 8.1.7 and interMedia

I am trying to determine the best datatype to use for a column I
wish to search using the interMedia contains() function. I am
developing a 100% java application using Oracle 8.1.7 on Linux.
I'd prefer to use the standard JDBC API's for PreparedStatement,
and not have to use Oracle extensions if possible. I've
discovered that there are limitations in the support for LOB's
in Oracle's 100% java driver. The PreparedStatement methods
like setAsciiStream() and setCharacterStream() are documented to
have flaws that may result in the corruption of data. I have
also noticed that socket exceptions sometimes occur when a large
amount of data is transferred. If I use the long datatype for
my table column, the setCharacterStream() method seems to
transfer the data correctly. When I try to search this column
using the interMedia contains() function, I get strange
results. If I run my search on Oracle 8.1.6 for Windows, the
results seem to be correct. If I run the same search on Oracle
8.1.7 for Linux, the results are usually incorrect. The same
searches seem to work correctly on both boxes when I change the
column type from long to clob. Using the clob type may not be
an option for me since the standard JDBC API's to transfer data
into internal clob fields are broken, and I may need to stick
with standard JDBC API's. My customer wishes to purchase a
version of Oracle for Linux that will allow us to implement the
search capability he requires. Any guidance would be greatly
appreciated.

I've finally solved it!
I downloaded the following jre from blackdown:
jre118_v3-glibc-2.1.3-DYNMOTIF.tar.bz2
It's the only one that seems to work (and god, have I tried them all!)
I've no idea what the DYNMOTIF means (apart from being something to do with Motif - but you don't have to be a linux guru to work that out ;)) - but, hell, it works.
And after sitting in front of this machine for 3 days trying to deal with Oracle's, frankly PATHETIC install, that's so full of holes and bugs, that's all I care about..
The one bundled with Oracle 8.1.7 doesn't work with Linux redhat 6.2EE.
Don't oracle test their software?
Anyway I'm happy now, and I'm leaving this in case anybody else has the same problem.
Thanks for everyone's help.

Installation Problem in SAPNW7.0 with Oracle on RHEL5.4

Hi Everyone,
I am installing SAP NETWEAVER7.0 SR3 with ORACLE 10.2.0.4 on RHEL5.4 Operating System. I have installed the java
and i have install the ORACLE 10.2.0.4 Successfully. I set the environment variable in vi .bash_profile and i set the kernal parameters with their values in vi /etc/sysctl.conf file then run the command sysctl -p. Later i run the ./sapinst script the cd /NW7.0/
BS_Installation Master_2005/ IM_LINUX_x86_64. It went fine up to the 24th phase. At the 24th phase "start instance" i got the error.
The error message is
" ERROR 2010-10-10 12:03:03.542
CJS-20022 Could not start instance 'DVEBMGS00' of SAP system QAS"
I did try my level best to resolve it. Can any one tell me what could be the issue and how to resolve it.
Thanks

startdb.log
Sun Oct 10 16:45:11 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start QAS database ...
Sun Oct 10 16:45:11 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/QAS/102_64<
ORACLE_SID is >QAS<
Sun Oct 10 16:45:11 IST 2010
check initora
Sun Oct 10 16:45:11 IST 2010
check initora
Sun Oct 10 16:45:11 IST 2010
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 10-OCT-2010 16:45:11
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/usr/sap/QAS/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = quality) (PORT = 1527))) (CONNECT_DATA = (SID = QAS) (GLOBAL_NAME = QAS.WORLD)))
OK (10 msec)
tnsping: V2 connect to QAS
Sun Oct 10 16:45:11 IST 2010
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Sun Oct 10 16:45:11 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Sun Oct 10 16:45:12 IST 2010
starting database
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Oct 10 16:45:12 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-09925: Unable to create audit trail file
Linux-x86_64 Error: 13: Permission denied

On Sun fire v490 - Solaris 10 with Oracle 8.1.7.4 & Sybase 12.0

Hi,
We are going to upgrade our server with this configuration -
Sun Fire V490     2 x 1.05 GHz UltraSPARC IV CPU
8096MB RAM     2 x73GB local disk
2x FC 2GB Sun/QLogic HBAs
DAT72
On one machine we will have Sun Solaris v10 with
Oracle DB v8.1.7.4 & Second one will be Sun Solaris v10 with Sybase DB v12.0.0.6.
Now our question is - Sun fire have Hyper-thread CPUs �� will the O/S and databases (Oracle and Sybase) view the proposed system as a true 4 CPU platform? Will parameters used to tune the database such as Sybase max online engines still operate in the same manner as before?
Our old machine configuration was - Sun E450     4x400MHz CPU     1024MB RAM     2 x18; 8x36GB disks

Questions on Oracle and Sybase should be directed to a database forum, this forum is for Sun hardware support.
Here is a link to a DB forum I look at from time to time:
http://www.dbforums.com/index.php
The topic of tuning Oracle or Solaris is way beyond the scope of this forum, I have attempted to go into it before but didn't get any feedback and I would only like to spend lots of time on it if I was being paid!!! On the memory side, keep in mind that Oracle 9i 64-bit can address a maximum of 2 ^ 64 ( 16777216 TB ) memory, prior to that the DBA had to define memory parameters in init.ora. To be honest the last time I worked with a Oracle 8 database I shut a HP K class server down permanently that had been migrated to Oracle 9i on Solaris by an Oracle consultant and I can't remember all the tuning trick etc.

Installation problem under AIX 5.3 with Oracle 10g

Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01                           (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas

Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4       *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed              rc = 2
|
|                              RSCP - Error
| Error from:            Codepage handling (RSCP)
| code: 128 RSCPENOOBJ   No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no:    2 line:    75          T100: TS008
| TSL01: CPV p3: Dummy-IPC   p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
      1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
      2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

Which version of Weblogic on Solaris is compatible with Oracle 8.1.7 - Unicode?

Hi folks,
We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
planing upgrade Oracle to 8.1.7 version and migrate the character set of the
database to UTF8 (Unicode),
so we need to know which versions of WLS are compatible with Oracle 8.1.7
and Unicode as Character Set.
Thanks in advance.
Moises Moreno.

Hi Moises Moreno
The latest version of weblogic server is 6.1 with service pack 1. This version
supports oracle 8.1.7 on major unix platforms viz., solaris(2.6,2.7,2.8),
hp-unix(11.0,11.0i), linux7.1, Aix4.3.3 and on windows platforms viz.,
NTwithsp5, 2000.
BEA jdrivers are having Multibyte character set support (UTF8).
Note : Weblogic server 5.1 with SP10 also supports oracle 8.1.7.
FMI : http://www.weblogic.com/platforms/index.html#jdbc
Thanks & Regards
BEA Customer Support
Moises Moreno wrote:
Hi folks,
We want upgrade WLS 4.5.1 to one of the last version of WLS, but also we are
planing upgrade Oracle to 8.1.7 version and migrate the character set of the
database to UTF8 (Unicode),
so we need to know which versions of WLS are compatible with Oracle 8.1.7
and Unicode as Character Set.
Thanks in advance.
Moises Moreno.

Need some help about i18n on Redhat 71. with Oracle 8.1.7

Initally I used Redhat 7.0 with Oracle 8.1.7, everything had worked find until I upgrade my system to Redhat 7.1.
I have no idea about Redhat locate setting. Well, I use NLS_LANG=TRADITIONAL CHINESE_TAIWAN.ZHT16BIG5 to inital database . some character like '3\' had worked fine. Now '3\' will become '3\\' after inserting into tables.
It's a emergent event! plz help me. I will appreciate your kindness ;>

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dragoon Chang ([email protected]):
Initally I used Redhat 7.0 with Oracle 8.1.7, everything had worked find until I upgrade my system to Redhat 7.1.
I have no idea about Redhat locate setting. Well, I use NLS_LANG=TRADITIONAL CHINESE_TAIWAN.ZHT16BIG5 to inital database . some character like '3\' had worked fine. Now '3\' will become '3\\' after inserting into tables.
It's a emergent event! plz help me. I will appreciate your kindness ;><HR></BLOCKQUOTE>
sorry ... I make a big mistake ... :)
After directlly connecting with sqlplus, I find out it's ok to use sql command.
well, The problem comes with PHP ...
I will try out the php.

Petstore 1.3 on Weblogic 7.0 with Oracle 8.1.7

Hi, I am trying to get petstore 1.3 working on Weblogic7.0
with Oracle 8.1.7 database on HPUX. I made some modifications
to the source files and regenerated the EAR files. When I copied
the four EAR files to the applications sub-directory, two .ear
files (petstoreadmin.ear & petstore.ear) deployed successfully
but not the supplier.ear and opc.ear. I got the following messages from deploying
supplier.ear:
Any help would be greatly appreciated,
Min-Shih
=====================================================
####<Nov 7, 2002 5:09:30 PM PST> <Warning> <EJB> <cutst058.cup.hp.com> <examplesServer>
<ExecuteThread: '9' for
queue: 'default'> <kernel identity> <> <010061> <The Message-Driven EJB: supplier_OPC_MDB_QUEUE
is unable to connect to the
JMS destination: jms/opcApplication/SUPPLIER_PO_MDB_QUEUE. The EJB container will
automatically attempt to re-establish the connection with the JMS server. This
warning may occur during WebLogic Cluster start-up if the JMS destination is located
on another WebLogic Server instance. When the JMS server connection is re-established,
the Message-Driven EJB will again receive JMS messages.
The Error was:
The JMS destination with the JNDI name: jms/opcApplication/SUPPLIER_PO_MDB_QUEUE
could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.xml
is correct, and the JMS destination has been deployed.>
####<Nov 7, 2002 5:09:30 PM PST> <Error> <EJB> <cutst058.cup.hp.com> <examplesServer>
<ExecuteThread: '9' for queue: 'default'> <kernel identity> <> <010072> <Error
starting EJB Module : supplierEjb.jar
Exception is :
Unable to deploy EJB: supplierEjb.jar from supplierEjb.jar:
weblogic.ejb20.WLDeploymentException: nulljava.lang.reflect.InvocationTargetException:
javax.ejb.EJBException: Supp
lier.MsgBean.ejbCreate: naming exceptionjavax.naming.LinkException: [Root exception
is javax.naming.NameNotFoundEx
ception: Unable to resolve 'jms.TopicConnectionFactory' Resolved: 'jms' Unresolved:'TopicConnectionFactory'
; remai
ning name 'TopicConnectionFactory']; Link Remaining Name: 'jms/TopicConnectionFactory'

Hi, I am trying to get petstore 1.3 working on Weblogic7.0
with Oracle 8.1.7 database on HPUX. I made some modifications
to the source files and regenerated the EAR files. When I copied
the four EAR files to the applications sub-directory, two .ear
files (petstoreadmin.ear & petstore.ear) deployed successfully
but not the supplier.ear and opc.ear. I got the following messages from deploying
supplier.ear:
Any help would be greatly appreciated,
Min-Shih
=====================================================
####<Nov 7, 2002 5:09:30 PM PST> <Warning> <EJB> <cutst058.cup.hp.com> <examplesServer>
<ExecuteThread: '9' for
queue: 'default'> <kernel identity> <> <010061> <The Message-Driven EJB: supplier_OPC_MDB_QUEUE
is unable to connect to the
JMS destination: jms/opcApplication/SUPPLIER_PO_MDB_QUEUE. The EJB container will
automatically attempt to re-establish the connection with the JMS server. This
warning may occur during WebLogic Cluster start-up if the JMS destination is located
on another WebLogic Server instance. When the JMS server connection is re-established,
the Message-Driven EJB will again receive JMS messages.
The Error was:
The JMS destination with the JNDI name: jms/opcApplication/SUPPLIER_PO_MDB_QUEUE
could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.xml
is correct, and the JMS destination has been deployed.>
####<Nov 7, 2002 5:09:30 PM PST> <Error> <EJB> <cutst058.cup.hp.com> <examplesServer>
<ExecuteThread: '9' for queue: 'default'> <kernel identity> <> <010072> <Error
starting EJB Module : supplierEjb.jar
Exception is :
Unable to deploy EJB: supplierEjb.jar from supplierEjb.jar:
weblogic.ejb20.WLDeploymentException: nulljava.lang.reflect.InvocationTargetException:
javax.ejb.EJBException: Supp
lier.MsgBean.ejbCreate: naming exceptionjavax.naming.LinkException: [Root exception
is javax.naming.NameNotFoundEx
ception: Unable to resolve 'jms.TopicConnectionFactory' Resolved: 'jms' Unresolved:'TopicConnectionFactory'
; remai
ning name 'TopicConnectionFactory']; Link Remaining Name: 'jms/TopicConnectionFactory'

Petstore 1.3 with Oracle 8.1.7 on Solaris 9 - deployment error

Hello,
I'm trying to get Petstore 1.3 shipped with WebLogic Server 7.0 to work with Oracle
8.1.7 on Solaris 9 with a third-party (Oracle) jdbc driver (classes12). I did
the following:
1) created a new connection pool with the correct Oracle database URL and driver
class name (oracle.jdbc.driver.OracleDriver), also user/password properties for
the Oracle db, and the WL server selected in targets;
2) created a database schema for Oracle based on the data in Pointbase and the
weblogic-cmp-rdbms-jar file as well as petstore_catalog_utf8.sql;
3) created a new tx datasource pointing to the Oracle conn pool;
4) modified the catalog component's ejb-jar.xml file's env-entry to contain CatalogOracleDAOImpl;
5) put weblogic.jar in the classpath;
6) used Java's dbping utility to check connection to the database via the Oracle
driver (works fine--no network adapter error or anything related).
I then rebuilt the ear files (build is successful), but when deploying get the
following error:
"Cannot deploy EJB AccountEJB from customerEjb.jar. Cannot find datasource for
JNDI datasource-petstorePool" and says to make sure the JNDI name and deployment
descriptors are correct (I checked the customer component's deployment descriptors
against the tx datasources' JNDI and they match).
What step(s) am I missing? Any suggestions on what else I need to modify would
be very much appreciated.
Thanks,
Beverly Claire

Beverly:
If you have 8.1, then you should be able to simply and easily create a
connection pool to petstore via the console.
The current error you encountering: "petstorePool does not exist" is
because either:
petstorePool is not defined or there was a failure when the pool was first
created trying to connect to the DBMS.
The full errror should be in the log file prior to the TXDatasource error.
Cheers
mbg
"Beverly Claire" <[email protected]> wrote in message
news:[email protected]...
>
Hello Rob,
Thanks for your reply. Yes, the tx datasource's JNDI name isdatasource-petstorePool.
The server log says that "petstorePool does not exist".
My conn pool contents:
Name: petstorePool
URL: jdbc:oracle:thin:@<replaced with db address>:<replaced with dbport>:<replaced
with db SID>
Driver Class Name: oracle.jdbc.driver.OracleDriver
Properties: user=<replaced with username*>
password=<replaced with password*>
*same username and password used to set up the Petstore tables in Oracledb.
>
My tx datasource contents:
Name: PetstoreDataSource
JNDI: datasource-petstorePool
Pool Name: petstorePool
No, actually we're not evaluating in the sense of just-trying-things-out.One
of our clients is considering an application server. They're relying on usfor
help in choosing which would be best. As of now, we are comparing BEA WLServer
7 and 8.1, Sun ONE Application Server 7 EE, Oracle 9i Application Server,and
Fujitsu Interstage v5 Application Server. For cluster testing andperformance
comparison purposes, we'd like to use the same J2EE Application across allservers,
and the obvious choice is Petstore 1.3. One aim is to smoothly connect toan Oracle
database. The other app servers provide setup scripts and databaseschemas for
Petstore-with-Oracle, so db conn and deployment are not a problem at all.As for
WL, we've been trying to get Petstore (both the version downloaded fromSun's
Java Blueprints and the version that shipped with WL 7) to work withOracle, but
no luck so far. It's getting a bit frustrating, given the ease with whichthings
worked out with the other app servers.
Yes, I've tried out Avitek MedRec for WL 8.1, and this time BEA has kindlymade
provisions for Oracle db, so connection to Oracle is not a problem. I'mhoping
BEA will come around to doing the same thing for Petstore, although I'mguessing
that won't be in the near future.
Any other suggestions would be much appreciated.
Thanks,
Bevery Claire

Clusterd lvm with Oracle VM

Similar Messages

Maybe you are looking for