Clustered column charts
how do you put a space in between two columns in a clustered
columnset?
All of relevant Label options is under Layout tab in Power View. I am afraid there is no change to Select Range for Value From Cells
that we generally do it from Chart Element > Data Labels > More Options > Format Data Labels > Label Options > Label Contains > Select Range for Value From Cells.
Tony Chen
TechNet Community Support
Similar Messages
-
Creating Custom Theme for Power View Clustered columns chart
Helllo...
Is it possible to create custom theme for displaying clustered columns chart on Power View?
Basically I am looking to create chart with specific colors for the bars? For e.g. for High - RED, Medium - Orange and Low - Yellow color. When I look at themes available in Excel 2013 I don't see this combination as such, so I was looking to create one
myself.
I tried to create a theme using video on youtube, but the theme which I created is not showing up in Power View mode in excel 2013.
www.youtube.com/watch?v=xs2F1n2-YR8Hi Sagar,
In Power View, it has several default theme colors for us to apply to our workbook. Also, we can change the Font, Text Size and Background of the chart. However, it is not support to design a custom theme color.
You can refer to the following steps to change the theme colors:
1. On the POWER VIEW tab, in the Themes group, click Themes.
2. Under Built-in, click the theme that you want to use.
Please refer to the following screenshot below:
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support -
How do you combine a stacked column chart with a clustered column chart
Hello,
I am trying to combine a stacked column chart with a clustered column chart. I know that in Excel there is a way to trick that described on the next site: http://people.stfx.ca/bliengme/ExcelTips/Columns.htm
Is that possible with BI Publisher?
Thank you very much!
Codruta CrisanFinally I get it myself:
You need to use graph type as BAR_VERT_STACK2Y and the declare the series that you want to see on the first Y vertical bar as assignedToY2="false" and the ones that you wanr to see on the second Y vertical bar as assignedToY2="true".
In my case I use 4 Series, 2 stack on the first clustured column and 2 stacked on the second (2Y) clustured colum....see below
graphType="BAR_VERT_STACK2Y">
<SeriesItems>
<Series id="0" assignedToY2="false" color="#BBD6E7"/>
<Series id="1" assignedToY2="false"/>
<Series id="2" assignedToY2="true" color="#004A96"/>
<Series id="3" assignedToY2="true"/>
</SeriesItems> -
SSRS Clustered Column Report with SharePoint List
Hi Guys,
I have a SharePoint List which has 3 columns: Team Status Date and i want to generate clustere column chart using SSRS report. Could you please provide me steps for the same?
X Axis - All the teams
Y Axis - Count
Legends
1. Pending - status <> "Completed"
2. Task Overdue - status <> "Completed" && (Date == Today between Date == Today - 30
please find attached sample of report.
This is what I have tried so far...
I just need help on forming expression.
Thanks, NileshHi Nilesh,
According to your description, you want to use a SharePoint list as datasource then create a chart.
In your scenario, we can add a calculated field which includes “pending” and “Task Overdue”. Then add the calculated field to the Series Groups panel. Please refer to the steps and results below:
1. Add a calculated field and specify the value with the expression below:
=switch(Fields!status.Value <> "Completed" and Fields!Date.Value <= now() and Fields!Date.Value >= dateadd("d",-30,now()),"TaskOverdue",Fields!status.Value <> "compeleted","pending")
2. Design the report like below and preview the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Hi,
we are trying to develope a dynamic column chart .but i faild to achived this can any one know how to create a dynamic column chart .some sample code
i am providing.
var arrCol:ArrayCollection=new ArrayCollection();
var ob:Object;
for(var l:int=0;l<4;l++)
ob=new Object();
if(l==0)
ob["month"]="January"
ob['category']="diesel Expense";
}else if(l==1)
ob["month"]="Feb"
ob['category']="stationary Expense";
ob["category_head"]="Generator";
else if(l==2)
ob["month"]="March"
ob['category']="Light Bill Expense";
ob["category_head"]="Generator";
else if(l==3)
ob["month"]="april"
ob['category']="security Expense";
ob["category_head"]="Generator";
arrCol.addItem(ob);
//*********** stackedColumnChart is my columnchart object
stackedColumnChart.dataProvider=arrCol;
xAxis.categoryField="month"
var columnSet:ColumnSet = new ColumnSet();
columnSet.type = "clustered";
var columnSeries:ColumnSeries;
var seriesArray:Array = new Array();
for(var i:int = 0; i < arrCol1.length; i++){
columnSeries = new ColumnSeries();
columnSeries.yField = arrCol1[i].category ;
columnSeries.displayName = arrCol1[i].category;
seriesArray.push(columnSeries);
// Alert.show("ff"+ arrCol[i].category);
} columnSet.series = seriesArray;
stackedColumnChart.series = [columnSet];
this code is showing legend properly but does not create any column chart.
please help it urgent......
thanksWhich connection you are using?
IF quite difficult if you are working under static data. -
Is there a way to create a clustered stacked chart in Numbers?
I was trying to create a clustered stacked chart in Numbers. Looks like there are way to do it for excel (multiple steps), but these steps aren't working/available in Numbers. Trying to make a chart that compares different years (clustered) sources of income (stacked) for each month of each year. Similar in apearence to this (http://peltiertech.com/WordPress/clustered-stacked-column-bar-charts/) where the comodities would be a month, Q1-Q2 Budget representing year 2010, Q1-Q2 Actual representing year 2011.
Hi Brent,
I believe that you have two options.
1. Interlace your categories and then leave a blank row to separate clusters
2. Make separate charts and overlay them with an offset.
Jerry -
I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
DanI was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML. -
Drill Down between 2 stacked column chart with multiple rows.
Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region Q2 Q3 Q4
Other 3658 3497 497
NA - North
America 3 3 1101
APJK 1 4 597
UK 324
EMEA North 1 1 288
CORPORATE 1 5 215
LA -
Latin America1 2 208
EMEA 1 199
EMEA South 1 1 169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region Priority Q2 Q3 Q4
Other D: End of Next Day 1568 1613 239
Other C: End of Day 983 893 119
Other A: 2 Hour 631 610 70
Other B: 4 Hour 396 318 56
NA -
North AmericaD: End of Next Day 2 2 514
APJK D: End of Next Day 3 297
NA -
North AmericaC: End of Day 284
NA -
North AmericaA: 2 Hour 1 170
UK D: End of Next Day 157
APJK C: End of Day 1 1 152
Other E: 3 - 5 Business Days 68 58 13
EMEA North D: End of Next Day 1 136
CORPORATE D: End of Next Day 4 107
NA - North America B: 4 Hour 1 104
LA - Latin America D: End of Next Day 1 1 86
EMEA D: End of Next Day 86
UK C: End of Day 85
APJK A: 2 Hour 79
EMEA South D: End of Next Day 72
EMEA North A: 2 Hour 69
EMEA North C: End of Day 56
APJK B: 4 Hour 55
EMEA C: End of Day 1 53
LA - Latin America C: End of Day 54
UK A: 2 Hour 49
EMEA South C: End of Day 1 44
CORPORATE A: 2 Hour 1 43
CORPORATE C: End of Day 44
LA - Latin America A: 2 Hour 1 42
EMEA South A: 2 Hour 1 32
EMEA B: 4 Hour 30
UK B: 4 Hour 30
EMEA A: 2 Hour 27
EMEA North B: 4 Hour 1 26
NA -
North AmericaE: 3 - 5 Business Days 25
LA - Latin America B: 4 Hour 23
EMEA South B: 4 Hour 20
CORPORATE B: 4 Hour 17
APJK E: 3 - 5 Business Days 13
Other F: 6 - 10 Business Days 6 4
Other G: 11 - 20 Business Days 6 1Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept. -
Help Creating Dynamic Stacked Column Chart with Multiple Criteria
Hi all. Im new here and hoping you can help. I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do. I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode). Anyway this is what the data table looks like
Month Year Company Positive # Negative # Neutral # Positive % Negative % Neutral %
October 2011 CompanyA 1234 1234 1234 10 10 10
October 2011 CompanyB 1234 1234 1234 10 10 10
October 2011 CompanyC 1234 1234 1234 10 10 10
October 2011 CompanyD 1234 1234 1234 10 10 10
November 2011 CompanyA 1234 1234 1234 10 10 10
November 2011 CompanyB 1234 1234 1234 10 10 10
November 2011 CompanyC 1234 1234 1234 10 10 10
November 2011 CompanyD 1234 1234 1234 10 10 10
December 2011 CompanyA 1234 1234 1234 10 10 10
December 2011 CompanyB 1234 1234 1234 10 10 10
December 2011 CompanyC 1234 1234 1234 10 10 10
December 2011 CompanyD 1234 1234 1234 10 10 10
The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column. I know how to make a combo box work and I know how to make a stacked column chart work with static data. I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data. I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is. It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values. Any help would be greatly appreciated!Which connection you are using?
IF quite difficult if you are working under static data. -
Need help to develop report with column chart
Hi
I am new to SAP BO world.Could anyone please help me to design report with column chart.Please guide me how to develop report for the following requirement.I am not aware of variance columns and variance labels.Please provide some guidance or some tutorials(for column Chart) so that I can complete the task. Please reply me as soon as possible.Waiting for reply.Thanks in advance.
Type: Column Chart
u2022 Rows: Banking Asset Margin (%)
u2022 Start / End Columns: PY YTD Act(Prior year year to date); CY YTD Act(Current year Year to date)
u2022 Variance Columns: # Var (CY-PY Act) for GOLM; Volume; Rate; Non Banking NII; Banking Volatility in NII; Banking Volatility in OOI; Fees/One Offs/Other; Volatile Items; Sophie
u2022 Sub-total columns: PY YTD Underlying; CY YTD Underlying.
u2022 Variance Labels: % Var (CY-PY Act) for Total Income and Underlying Income
u2022 Sub-Total Labels: # Var (CY-PY Act) for Net Insurance Income; Banking Volatility; Other Operating Income
Additional information
u2022 Variance columns (bar) colours: Red = Adverse to Prior Year; Green = Favourable to Prior Year
u2022 Columns to show values. Adverse values to be shown in red text in brackets. Favourable results in black text.
u2022 All values in Black, but adverse to be shown below the bar.Hi,
This type of question is almost impossible to answer over a forum .
You need to work with your business to understand what these requirements mean in terms of data modelling and relationships between object entities.
- Some of these metrics should be delegated to source, and calculated in the update routines to your datatargets (aka Cubes/Tables)
- Others could be resolved in the semantic layer (Universe)
- Other will be calculated in the presentation layer as local formulae or variables.
whilst BusinessObjects is a fairly intuitive tool, it may be unreasonble to expect a new learner to deliver an advanced report with conditional formatting.
Regards,
H -
In the new Numbers, How can I get a 2D stacked column chart to display only 1 column?
In the new Numbers, How can I get a 2D stacked column chart to display only 1 column?
This is one of those things that I find really strange about Numbers 3. The control for what you want to do is not where anyone would expect to find it.
Select the Chart
Click on Edit Data References
Look at the bottom left corner of the Numbers window. It should say "Plot Columns as Series" or "Plot Rows as Series"
Click on it and change it to the other -
SSRS Column Chart Design Returning values in a format different from SSRS -SSAS Query Designer
Hi All,
I have an SSAS cube Measure Group with Multiple Measures that I am attempting to return on one SSRS report and reflect the
values using a ssrs column chart.
My Measure Group (Patients).
Measures:
PatientsOnMeds
PatientOnRelapse
PatientsCounseld
TotalNumberOfPatientsRegisterd
NewlyRegisteredPatients
HealthPersonelTrainef
Demension:
Time (Year) :filtered to 2012 & 2013
In my SSRS query designer I have filtered the above Measures with Time Dimesion year 2012 & 2013
and the data is returned as :
Year |PatientsOnMeds|PatientOnRelapse|TotalNumberOfPatientsRegisterd|NewlyRegisteredPatients|
2012 | 700 | 526 | 25 | 456
2013 | 245 | 245 | 15 | 70
Now the problem is when I return this data on the column Chart it's in messed up mesh
On the chart Data:
-Values :Measures
-Series Group: Dimension
The report values are returned in multiple columns for each value segmented by year i.e year 2012,Year 2013.
I want a single column for each Measure (value) for each single year and The chart axis to reflect the measures(values)
instead of grouping values according to series group.
instead the legend returns:
-Year A -PatientsOnMeds
-Year A -PatientOnRelapse
-Year B -PatientsOnMeds
-Year B -PatientOnRelapse
I would like the legend to reflect on -Year A,Year B in color code that will be highlighted in the column values.
Please point me in the right course if you can.Your insights are highly appreciated.Thank you in advance.Hi Charlie,
Thank you for your kind response.
In actual I want the legend to show:
-2012
-2013
And the bottom axis to show:
PatientsOnMeds
PatientOnRelapse
PatientsCounseld
TotalNumberOfPatientsRegisterd
NewlyRegisteredPatients
HealthPersonelTrained
Indicating in color code for Year 2012 and Year 2013.
This the challenge that I am struggling with.I hope you understand my scenario.
It aint easy. -
Introduction
In SQL Server Reporting Service (SSRS), you may need an average value on column chart.
For the above chart, add an average score line to the chart, you can get which student’s score is larger than average score, and which student’s score is less than average score clearly. This document demonstrates how to add an average line to series groups
on SSRS column chart.
Solution
To achieve this requirement, you can add another values to the chart, change the chart type to line chart. Set the value to average value of the series group and set the line to show only once by using expression. Please refer to the link below to see the
detail steps.
Click the chart to display the Chart Data pane.
Add Score field to the Values area.
Right-click the new inserted Score1 and select Change Chart Type. And then change chart type to line chart in the Select Chart Type window.
Change the Category Group name to Subject. Here are the screenshot for you reference.
Right-click the new inserted Score1 and select Series Properties.
Click the expression button on the right of Value field textbox, type the expression below:
=Avg(Fields!Score.Value,"Subject"))
Click Visibility in the left pane, select “Show or hide based on an expression”, and type in the expression below:
=IIF(Fields!Name.Value="Rancy",FALSE,TRUE)
Name in the expression is one of the Students. Then only one line chart is be displayed by using this expression.
Click Legend in the left pane, type Average_Score to the Custom legend text box.
The report looks like below:
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh -
Problem with mouse-over value on a column chart (by Series)
Hi.
First of all thanks for any offered tip.
I am having a problem with a column chart.
When I move the mouse over a column it should show a small pop-up (or tip) with the column name (series name) and the value (series value). The problem is that it displays an extra '1' just like the following:
SeriesName
1
X.XXX
How can I remove the extra '1' and only show the name and the value ?
The data is populated by series (manually added).
Mihai.Hi,
Thanks for the tip Shanthakumar KA.
Yes. It looks like the '1' is coming from the X Axis labels. The chart that I have built does not require any labels on the X Axis, so this was not set (X-Axis labels: Empty). I tried setting this to an empty cell, but the '1' still appears in the mouse-over tip.
It is very weird. If I leave the X-Axis labels empty, I still get the '1' displayed which is very annoing.
Are there any solutions for this except the re-building the tip with a label a.k.a. '[customize the mouse over values|http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html].'
Regards,
Mihai. -
Column Chart with Multiple axes
Hi folks
I am using flex 2 charts for displaying data. I want to show my data using column chart with secondary axis. However columns for multiple series are coming one over another. here is the code I have attached:-
But I want to put columns side by side. Any thoughts will be appreciated.
Warm Regards
Rush-meAny thoughts?
Warm Regards
Rush-me
Maybe you are looking for
-
Hi I have an HP envy X2 PC, product number C7F27AV with windows 8 and I have almost no volume! I have done the BIOS update and driver update listed under another post and now my computer has sound all the time but it is extreamly low and I cannot wat
-
I go on and off the Internet several times every day. In the last 4 days, when I go off the Internet by "x" ing out Firefox and I then later in the day try to go back on the Internet, I get a message that states something to the effect that Firefox i
-
I would like to use Lightroom. I have Windows desktop, Galaxy S5 phone(android), and iPad. Is this all compatible?
-
Where is the zoom slider for images in Finder?
Since installing Lion, I have noticed that I can no longer make the thumbnails in a Finder window larger using a zooming slider (as is found in iPhoto). If I remember correctly, when I used to open a folder full of images in thumbnail format, I was a
-
How do I get "Vanishing Point" to work properly on iMac Retina 5k
How do I get "Vanishing Point" to work properly on iMac Retina 5k? When I "render grid to photoshop" the grid is not in right place and scale. I'm using latest version of CC.