Clustered JMS: license signature validation error

I have encountered the following error when I tried to send JMS message to a queue. Can anyone help to point out what license has been expired and where is it located? Please help
          weblogic.jms.common.InvalidDestinationException: Error creating producer: License exception prevents access to destination ImportFileQueue
          weblogic.jms.common.JMSException: Clustered JMS: license signature validation error!

JDK 1.2 is a bad choice. I have not seen directories called "java13".
Where, oh where, was my WLS installed?
$ cat $HOME/bea/beahomelist
Which version of WLS are you using?
Your JDK is most likely parallel to wlserver6.1 (?) in jdk131/jre/bin .
Happy Hunting,
Wayne Scott
dave robern wrote:
> After installing (solaris 8) I tried to start the examples server and first
> it could not find java_home (/opt/bea/java13 - I guess the install created
> teh java13 directory but nothing is installed?). I manually configured
> java_home=/usr/java1.2 and then tried again.
>
> Now after using the system password created during installation I get:
>
> $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
>
> Unable to start WebLogic Server !! WebLogic: license signature validation
> error!
>
> $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
>
> explain?
>
> Dave

Similar Messages

  • License signature validation error! with NodeManager

    Hi,
    I downloaded the WebLogic Server 6.1 eval from the BEA website and started up a
    NodeManager on the same machine as my
    Administration Console. I am trying to use
    it to start up difference servers on my test machine. For some reason when I try to start up any of my defined server instances I get:
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    WebLogic: license signature validation error!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    If I manually startup the servers using the startManagedWebLogic.sh everything works.
    I'm running on Solaris 8.
    What could I be doing wrong? Does the eval license not cover this scenario?
    Thanks,
    Andrea Rosso

    Hi.
    If you aren't already doing so I suggest downloading and using WLS with service pack 2. If you are then please open a case with support.
    Thanks,
    Michael
    Andrea Rosso wrote:
    Hi,
    I downloaded the WebLogic Server 6.1 eval from the BEA website and started up a
    NodeManager on the same machine as my
    Administration Console. I am trying to use
    it to start up difference servers on my test machine. For some reason when I try to start up any of my defined server instances I get:
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    WebLogic: license signature validation error!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    If I manually startup the servers using the startManagedWebLogic.sh everything works.
    I'm running on Solaris 8.
    What could I be doing wrong? Does the eval license not cover this scenario?
    Thanks,
    Andrea Rosso--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • License signature validation error!

    After installing (solaris 8) I tried to start the examples server and first it could not find java_home (/opt/bea/java13 - I guess the install created teh java13 directory but nothing is installed?). I manually configured java_home=/usr/java1.2 and then tried again.
    Now after using the system password created during installation I get:
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    WebLogic: license signature validation error!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    explain?
    Dave

    JDK 1.2 is a bad choice. I have not seen directories called "java13".
    Where, oh where, was my WLS installed?
    $ cat $HOME/bea/beahomelist
    Which version of WLS are you using?
    Your JDK is most likely parallel to wlserver6.1 (?) in jdk131/jre/bin .
    Happy Hunting,
    Wayne Scott
    dave robern wrote:
    > After installing (solaris 8) I tried to start the examples server and first
    > it could not find java_home (/opt/bea/java13 - I guess the install created
    > teh java13 directory but nothing is installed?). I manually configured
    > java_home=/usr/java1.2 and then tried again.
    >
    > Now after using the system password created during installation I get:
    >
    > $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    >
    > Unable to start WebLogic Server !! WebLogic: license signature validation
    > error!
    >
    > $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    >
    > explain?
    >
    > Dave

  • WL/Oracle 9 license signature validation error

    Hello,
    I'm trying to check my oracle 9 solaris connection to WL 6.1 SP 2 through dbping.
    I get a license signature validation error. I've already worked through the "put
    the license in your classpath" problem, but this one has me stumped. There is an
    oracle block with a signature in my license file. Any ideas? This is the first task
    I've gotten on a new job and it's NOT going well. Please help!
    jDriver/Oracle: license signature validation error!
    Error encountered:
    java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Exception.java:42)
    at java.sql.SQLException.<init>(SQLException.java:82)
    at weblogic.jdbc.oci.Driver.loadLibraryIfNeeded(Driver.java:182)
    at weblogic.jdbc.oci.Driver.connect(Driver.java:76)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at java.sql.DriverManager.getConnection(DriverManager.java:106)
    at utils.dbping.main(dbping.java:167)

    "Alan Coffel" <[email protected]> wrote:
    >
    Hello,
    I'm trying to check my oracle 9 solaris connection to WL 6.1 SP 2 through
    dbping.
    I get a license signature validation error. I've already worked through
    the "put
    the license in your classpath" problem, but this one has me stumped. There
    is an
    oracle block with a signature in my license file. Any ideas? This is the
    first task
    I've gotten on a new job and it's NOT going well. Please help!
    jDriver/Oracle: license signature validation error!
    Error encountered:
    java.sql.SQLException: Fail to load jDriver/Oracle due to license checking
    failed!
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Exception.java:42)
    at java.sql.SQLException.<init>(SQLException.java:82)
    at weblogic.jdbc.oci.Driver.loadLibraryIfNeeded(Driver.java:182)
    at weblogic.jdbc.oci.Driver.connect(Driver.java:76)
    at java.sql.DriverManager.getConnection(Compiled Code)
    at java.sql.DriverManager.getConnection(DriverManager.java:106)
    at utils.dbping.main(dbping.java:167)
    hmmm. I had this one, but adding the BEA_HOME to my classpath fixed it. check your
    set_environment.bat and see if the DB_CLASSPATH is set to include BEA_HOME, and when
    the server starts up, it echoes the classpath, so you can check if its picked the
    location of the license file.
    did you already make sure that your license.bea has a valid entry for JDriver? (just
    in case...)
    -deepak

  • JDriver/MSSQLServer4: License signature validation error

    I have a valid WLS license. When I try to make a jdbc connection(MSSQL7). I got
    the following exception sometime.
    java.sql.SQLException: $$$$$$$$$$$$$$License Exception $$$$$$$
    jDriver/MSSQLServer4:license signature validation errot!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$
    Does anyone has any idea about this problem ?
    Thanks,
    Taohe

    How did you obtain the license? Is it the eval license? Of all things the license
    signature could have been corrupted or you are using license of one version
    with a server of another version.
    Shiva.
    taohe wrote:
    I have a valid WLS license. When I try to make a jdbc connection(MSSQL7). I got
    the following exception sometime.
    java.sql.SQLException: $$$$$$$$$$$$$$License Exception $$$$$$$
    jDriver/MSSQLServer4:license signature validation errot!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$
    Does anyone has any idea about this problem ?
    Thanks,
    Taohe

  • "License Not Valid" Error on BOE XI 3.1 for Web-Intelligence

    Hey Everyone,
    This has been going on for sometime now. I downloaded the trial version ( BOE ) and installed the temSporary key in it. Now when I go to Infoview it doesn't show the option for Web-Intelligence document. So I went over to Rich Client and tried to log in. Now it gives me the error "License not Valid".
    The weird part is I can log into the Designer, DeskI , CMC , and it works perfectly, the only problems I'm getting are in WebI. I've tried doing a clean sweep and still it doesn't work. Any ideas on how to fix this?
    Thanks

    Can you run the following query in Query Builder and check whether SI_ENABLE_WEBI is true ?
    SELECT SI_SYSTEM_INFO FROM CI_SYSTEMOBJECTS WHERE SI_ID = 4
    Also, have you tried using a different temporary key?
    Best,
    Srinivas

  • When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation. --- " cache File Read error"

    When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
    Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "

    Hi,
    I also get the following message:
    "Could not read ProductKey entry from the cache file"
    I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
    Do you have a solution for this problem? Did you finish the installation?
    Christian

  • License validation error

    Has anyone any experience with this nasy license validation error? It occurs in the AL BPM Process Administrator when I attempt to deploy a published process to a J2EE app server.
    Error: enterprise: license error, license ouwithprocess validation failed!
    Note that this only started to occur after I upgraded to AL BPM 5.7 service pack 1. This error did not occur before sp1.

    The Evaluation Enterprise license has a limitation where you can have up to 2 concurrently deployed projects at one moment in time. If this is the case you will receive this error message. Can you validate if this is the case ?
    Thanks !
    eduardoc.

  • Form validation error with mandatory fields and signature field

    Hello,
    I have seen that many other users are facing this issue, and they partialy do solve it with some workarounds. However, none of them applies to my case.
    I have a dynamic form (can be registration form for example) where user fills in bunch of fields. Some of them are mandatory.
    When user signs the form, I get our favourite validation error popups that filed this and this did not validate. (I think that the signature is not valid too once I get these errors).
    Workaround would be to set all fileds in the form as optional, however, the presign and postsign events work only in A9 and I need the form to be compatible with ver. 8 too.
    I also need to make sure, that they are not set to optional, if the signing fails, user clicks on cancel etc...
    Any ideas how to acomplish such a scenario?
    Thanks
    J.

    solved by myself.
    You have to install and configure the reader rights credentials mentioned in note 736902

  • Task License Validation Error Message/ Automatic Scheduling for Disk Defrag is not working.

    I saw where I could possibly ask you for answers to the problems that I am having with Windows 8.1 pro. First of all I noticed that my disk defragmentation task which was set on daily wasn't operating.  It indicated that the last time it ran all disks
    for disk defrag was back on 4/20 and on the this morning of 4/26 there was the date 4/20 for all the disks.  I went into the Administrator Tools section of Control Panel and found Schedule Tasks.  When I opened Schedule Tasks I got the
    error message that indicated a Task License Validation Error. It went on to read:The task XML contains a value which is incorrectly formatted or out of range.  This is my question...are the two related...the inoperative automatic maintenance of disk defrag
    and this error message from task scheduler?  And how do I address each issue to solution.   Thank you very much. 
    [email protected]

    The MSDN Windows and Windows Phone app development forums are for developers to discuss writing their own Windows and Windows Phone apps.
    For help using Windows please post on the Windows forums on
    http://answers.microsoft.com .

  • Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

    I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine.  I have only built the machine, and tried to load the Drivers.
    I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD.  I identified that the Bluetooth driver was the issue.  I then did not load the Bluetooth
    drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os.  (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
    I have not received a single Update either.  The Auto update feature claims that I am up to date.  I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
    Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain.  Also the results of the sfc /scannow are copied below.
    My Questions
    I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom.  Will you take a look??
    Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
    Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
    Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
    drivers work. (including the blue tooth)
    The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
    Errors and Results.
    There are also a number of logs that show various Crit, Error, and Warning logs.  I will include those if need be.
    This is the majority of the error messages, and I have missed the opportunity to capture others.
    Internet explorer encountered Validation errors:
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : comctl32.dl
    iii.     
    Assert offset: 00133A2A
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 008BE823
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0040F9E8
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : iertutil.dll
    iii.     
    Assert offset: 001DEC51
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 00014159
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Microsoft Management Console Encountered a Validation Error
    Validation Error
    i.     
    Process Name: mmc.exe
    ii.     
    Module Name : ieframe.dll
    iii.     
    Assert offset: 00000000006C9283
    Scripted Diagnostics Native Hot encountered a Validation Error
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : urlmon.dll
    iii.     
    Assert offset: 00000000001A0A73
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017f32
    Windows System Assessment Tool encountered a validation error
    Validation Error
    i.     
    Process Name: winsat.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017F32
    Windows Explorer Encountered a validation Error
    Validation Error
    i.     
    Process Name: Explored.exe
    ii.     
    Module Name : thumbcache.dll
    iii.     
    Assert offset: 00000000000300BE
    AI Suite 2 encountered a validation error
    Validation Error
    i.     
    Process Name: AI Suite 2.exe
    ii.     
    Module Name : ntdll.dll
    iii.     
    Assert offset: 000686BD
    the number “2” is the substitutedfor the roman numeral 2
    I believe that this is part of the MB Suite.
    My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download.  Activated on 8-12-2012
    Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
    Chip Set: bx80619i73930k
    2x Memory: cmx16gx3m2a1600c11 Corsair
    Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
    Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
    Generic optic drive: SH-222bb/bebe Samsung
    Here is the Microsoft Fix It error code
    Assertion Failed!
    Program:…
    File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
    Line: 2131
    Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
    (Press Retry to debug the application – JIT must be enabled)
                    Abort    Retry     Ignore
    Abort
    Closes the program
    Retry
    Repeats the error
    Verbatim
    Ignore
    Closes the program
    Nothing happens
    Here is the Microsoft Genuine Advantage Diagnostic Report
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-*****-*****-8C7YB
    Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
    Windows Product ID: 55041-146-2397786-86942
    Windows Product ID Type: 6
    Windows License Type: Volume MAK
    Windows OS version: 6.1.7601.2.00010100.1.0.004
    ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_rtm.101119-1850
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 109 N/A
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
    manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
    Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> 
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Enterprise edition
    Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
    Installation ID: 000792957432055771547065313840421702569731971164600080
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: 8C7YB
    License Status: Licensed
    Remaining Windows rearm count: 5
    Trusted time: 8/12/2012 5:47:25 PM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:
      ACPI Table Name           OEMID Value     OEMTableID Value
      APIC                                    ALASKA                               
    A M I
      FACP                                   ALASKA                               
    A M I
      HPET                                    ALASKA                               
    A M I
      MCFG                                 ALASKA                               
    OEMMCFG.
      SSDT                                    AMICPU                              
    PROC
    Scan Now Results
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>sfc /scannow
    Beginning system scan.  This process will take some time.
    Beginning verification phase of system scan.
    Verification 100% complete.
    Windows Resource Protection did not find any integrity violations.
    C:\Windows\system32>

    Thank you for your valuable time.
    I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
    The Memory Tool did not find anything amiss.
    As per another thread I am going to try flashing the bios as well with the updates.
    Following are the Chkdsk results.
    Are there any other suggestions?
    Chkdsk Results
    Checking file system on C:
    The type of the file system is NTFS.
    A disk check has been scheduled.
    Windows will now check the disk.                        
    CHKDSK is verifying files (stage 1 of 5)...
      89600 file records processed.                               
              File verification completed.
      221 large file records processed.                                     
    0 bad file records processed.                                       
    1596 EA records processed.                                             
    44 reparse records processed.                                      
    CHKDSK is verifying indexes (stage 2 of 5)...
      131874 index entries processed.                                        
    Index verification completed.
      0 unindexed files scanned.                                           0
    unindexed files recovered.                                       CHKDSK
    is verifying security descriptors (stage 3 of 5)...
      89600 file SDs/SIDs processed.                                        
    Cleaning up 36 unused index entries from index $SII of file 0x9.
    Cleaning up 36 unused index entries from index $SDH of file 0x9.
    Cleaning up 36 unused security descriptors.
    Security descriptor verification completed.
      21138 data files processed.                                           
    CHKDSK is verifying Usn Journal...
      36120296 USN bytes processed.                                            
    Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
      89584 files processed.                                                
    File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
      476262075 free clusters processed.                                        
    Free space verification is complete.
    Windows has checked the file system and found no problems.
    1953410047 KB total disk space.
      48065140 KB in 61610 files.
         43468 KB in 21139 indexes.
             0 KB in bad sectors.
        253139 KB in use by the system.
         65536 KB occupied by the log file.
    1905048300 KB available on disk.
          4096 bytes in each allocation unit.
     488352511 total allocation units on disk.
     476262075 allocation units available on disk.
    Internal Info:
    00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00  .^...B..........
    e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
    6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00  m.u.i...........
    Windows has finished checking your disk.
    Please wait while your computer restarts.

  • Weblogic app server wsdl web service call with SSL Validation error = 16

    Weblogic app server wsdl web service call with SSL Validation error = 16
    I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
    Cannot complete the certificate chain: No trusted cert found
    Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
    Validation error = 16
    From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
    Here is how I load trustStore and keyStore in my java program:
         System.setProperty("javax.net.ssl.trustStore",”cacerts”);
         System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
         System.setProperty("javax.net.ssl.trustStoreType","JKS");
    System.setProperty("javax.net.ssl.keyStoreType","JKS");
    System.setProperty("javax.net.ssl.keyStore", keyStoreName);
         System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
    Here is how I create cacerts using verisign hierarchy certs (in this order)
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
    Because my program is a weblogic app server, when I start the program, I have java command line options set as:
    -Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
    -Dweblogic.security.SSL.ignoreHostnameVerification=true
    -Dweblogic.security.SSL.enforceConstraints=strong
    That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
    In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
    I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
    1.     Do I create “cacerts” the correct order with right keeltool options?
    2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
    3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
    4.     Do I need to put the “cacerts” to some specific weblogic directory?
    ---------------------------------wsdl file
    <wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
         <wsp:Policy wsu:Id="TokenServices_policy">
              <wsp:ExactlyOne>
                   <wsp:All>
                        <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                             <wsp:Policy>
                                  <sp:TransportToken>
                                       <wsp:Policy>
                                            <sp:HttpsToken RequireClientCertificate="true"/>
                                       </wsp:Policy>
                                  </sp:TransportToken>
                                  <sp:AlgorithmSuite>
                                       <wsp:Policy>
                                            <sp:Basic256/>
                                       </wsp:Policy>
                                  </sp:AlgorithmSuite>
                                  <sp:Layout>
                                       <wsp:Policy>
                                            <sp:Strict/>
                                       </wsp:Policy>
                                  </sp:Layout>
                             </wsp:Policy>
                        </sp:TransportBinding>
                        <wsaw:UsingAddressing/>
                   </wsp:All>
              </wsp:ExactlyOne>
         </wsp:Policy>
         <wsdl:types>
              <xsd:schema targetNamespace="http://tempuri.org/Imports">
                   <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
                   <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
              </xsd:schema>
         </wsdl:types>
         <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
              <wsdl:part name="parameters" element="tns:GetUserToken"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
              <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
              <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
              <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
         </wsdl:message>
         <wsdl:portType name="ITokenServices">
              <wsdl:operation name="GetUserToken">
                   <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
                   <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
              </wsdl:operation>
              <wsdl:operation name="GetSSOUserToken">
                   <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
                   <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
              </wsdl:operation>
         </wsdl:portType>
         <wsdl:binding name="TokenServices" type="tns:ITokenServices">
              <wsp:PolicyReference URI="#TokenServices_policy"/>
              <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
              <wsdl:operation name="GetUserToken">
                   <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
                   <wsdl:input>
                        <soap12:body use="literal"/>
                   </wsdl:input>
                   <wsdl:output>
                        <soap12:body use="literal"/>
                   </wsdl:output>
              </wsdl:operation>
              <wsdl:operation name="GetSSOUserToken">
                   <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
                   <wsdl:input>
                        <soap12:body use="literal"/>
                   </wsdl:input>
                   <wsdl:output>
                        <soap12:body use="literal"/>
                   </wsdl:output>
              </wsdl:operation>
         </wsdl:binding>
         <wsdl:service name="TokenServices">
              <wsdl:port name="TokenServices" binding="tns:TokenServices">
                   <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
                   <wsa10:EndpointReference>
                        <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
                   </wsa10:EndpointReference>
              </wsdl:port>
         </wsdl:service>
    </wsdl:definitions>
    ----------------------------------application log
    adding as trusted cert:
    Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
    Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
    adding as trusted cert:
    Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
    Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
    adding as trusted cert:
    Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
    Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
    <Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
    java.lang.Exception: New alert stack
         at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
         at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
         at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
         at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
         at com.certicom.tls.record.WriteHandler.write(Unknown Source)
         at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
         at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
         at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
         at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
         at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
         at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
         at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
         at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
         at javax.xml.ws.Service.<init>(Service.java:56)
         at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
         at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
         at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
         at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
         at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
    <Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
    java.lang.Exception: New alert stack
         at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
         at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
         at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
         at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
         at com.certicom.tls.record.WriteHandler.write(Unknown Source)
         at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
         at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
         at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
         at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
         at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
         at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
         at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
         at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
         at javax.xml.ws.Service.<init>(Service.java:56)
         at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
         at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
         at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
         at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
         at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

    I received a workaround by an internal message.
    The how to guide is :
    -Download the wsdl file (with bindings, not the one from ESR)
    -Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
    -Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
    -Create a new logicial destination that point to the wsdl file modified
    -Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
    Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

  • How do you resolve Financial Management service validation error in EPM ?

    Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
    Environment:
    Quad-Core AMD Processor 2.2 GHz (Server Machine)
    5 GB RAM
    Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
    Application Server:
    WebLogic Server 9.2 Custom Installation (with Add-Ins)
    http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
    Database:
    Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
    http://www.oracle.com/technology/software/products/database/index.html
    Hyperion EMP System 11.1.1.3:
    Installer
    Foundation Services (4 Files )
    EMP Architect
    Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
    http://www.oracle.com/technology/software/products/bi/performance-management/index.html
    The following are the sequences of steps carried out during the Installation and Configuration of EPM:
    1)     Installed the Server along with its respective SP2 – Shutdown the machine
    2)     Assigned IP and DNS addresses
    3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
    4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
    5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
    6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
    7)     Logged into database and acknowledge the licensing window – Shutdown the machine
    8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
    9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
    10)     At the end of installation window, I carried out the configuration in the following scearios:
    Scenario 1: Configuration all at Default settings
    Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
    Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
    RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
    Financial Management:
    FAILED SVR: HFM Service Validation Check if HFM service in working state.
    Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
    Recommended Action: Make sure HAT utility is working. 1 s
    I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
    Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
    This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
    I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
    I have downloaded the files from following URL:
    http://www.oracle.com/technology/software/products/bi/performance-management/index.html
    I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
    Many Thanks
    BT
    Edited by: user8973921 on 13-Apr-2010 05:08
    Edited by: user8973921 on 13-Apr-2010 10:56
    Edited by: user8973921 on 14-Apr-2010 02:30

    I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
    Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

  • Cannot install OSX 10.4 (no valid error message) - why?

    Hi everybody. I've been trying to install Mac OS X 10.4 on this G4 Quicksilver, but it seems that it's impossible. When I boot from the CD, it tells me "Mac OS X 10.4 cannot be installed on this computer" and promptly tells me to restart. It doesn't really give a valid error message, not even in the install logs.
    I've currently got Mac OS X 10.2.8 installed. Another issue may be the fact it's fitted with 1 GB RAM that runs on a different speed than the other 1 GB, but I doubt it. I really wonder why I can't seem to install the new system, since I seem to meet the requirements pretty easily.
    Thanks for your help.

    Hi gja,
    first of all: WELCOME TO THE DISCUSSIONS!
    Most disk sets sold on eBay or similar sites are hardware specific software install disks. You CANNOT use hardware specific software install&restore disks that shipped with another computer. These simply do not contain the hardware drivers for any other computer model but the one they originally shipped with. You have to buy the retail full install DVD.
    Besides this technical limitation it would also be ILLEGAL (unless you can guarantee and prove that the original owener completely erased it from his computer). Apple's Software License Agreement states in point 2:
    2. Permitted License Uses and Restrictions. A. This License allows you to install and use one copy of the Apple Software on a single Apple-labeled computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time,...

  • XML validation error while parsing MXI Manifest

    Hi,
    I have created an hybrid extension for Photoshop. I want to upload my extension on Adobe Exchange. during the upload process I get an error,
    "XML validation error while parsing MXI Manifest: Declarations can only occur in the doctype declaration. Line: 19 Position: 791 Last 80 unconsumed characters".
    The error description specifies that description in MXI file is not valid. Below are the contents of my MXI file.
    <macromedia-extension
               name="yyy"
               id="com.yyy"
               version="1.0.0"
               type="object"
               requires-restart="true">
              <author name="abcd" />
              <products>
              <product familyname="Photoshop" maxversion="" primary="true" version="12.0"/>  
              </products>
    <description>
              <![CDATA[
    <p><font size="14" color="black"><b>abcd</b> qwertyuioipafgjhkjljljklkjl
    <br><br>
    Open Extension via: Photoshop top menu > Window > Extensions > abcd.
    <br><br>
    Online support at: <a href="http://www.abcd.com/help.php">http://www.abcd.com/help.php</a></font></p>
    <br>]]>
    </description>
    <ui-access>
              </ui-access>
    <license-agreement>
    </license-agreement>
    <files>
                <file destination="$ExtensionSpecificEMStore/com.abcd/html/abcd.html" products="" source="zxp-support/Description/abcd.html"/>
                <file destination="$ExtensionSpecificEMStore/com.abcd/html/abcd.png" products="" source="zxp-support/Description/abcd.png"/>
                <file destination="" file-type="CSXS" products="" source="abcd.zxp"/> 
                <file destination="$automate" file-type="plugin" platform="mac" products="Photoshop" source="mac/abcd.plugin"/>
                <file destination="$automate" file-type="plugin" platform="win" products="Photoshop32" source="win32/abcd.8li"/>
                <file destination="$automate" file-type="plugin" platform="win" products="Photoshop64" source="win64/abcd.8li"/>
    </files>
    </macromedia-extension>
    Can anyone please point out why am I getting the error?
    Thanks

    Hi CarlSun,
    Thanks for the reply. I have made the changes suggested by you.
    I have few queries:
    1.  Can we use attribute "source" in the description tag?
         I have created a local html page and specified it in source attribute. but the Extension Manager CS6 did not render the local html page and displayed      the following:
         No description avaliable. Click the following link for more details.
         "http://www.abcd.html". Is it possible to display a local html page in Extension Manager CS6?
    2. Can I display an image (png) in CDATA under description tag? If yes, then can you please guide me how can I do so?
    3. As suggested in tech notes MXI file must include UTF-8 encoding as header (<?xml version="1.0" encoding="UTF-8"?>). The MXI I am using does      not have this header. Do I need to include the header?
    Thanks

Maybe you are looking for