Clustering and FRS folder shared

Post Author: gcr
CA Forum: Administration
Hi,
I need to create a complete cluster with BOXI Release 2 Service pack 2 on Solaris 10 .
The install on 2 machines work and the cluster (with clustername, database connection) is available.
I need also BOXI share folder for frs (file repository server ?) but how configure this ?
I need share all the data subfolder of Businessobjects or only the input/output frs service ?
thank you for your help.
gilles

Similar Messages

Does simple file and folder sharing on an iMac work with OSX Server?

Hi There
I wonder if I should install OSX Server on an iMac wher several users work on the same files and folders.
My question - before I do something I might regret:
Does simple file and folder sharing on an iMac within several users really work with the help of OSX Server?
All I want to be able to do:
Admin creates a new folder1 and gives it read- and write access for user1 and user2.
User1 creates a subfolder1 in folder1, and a document1 in subfolder1.
User2 edits document1. Later Admin edits document1.
All these simple editing of files and folders (and subfolders) within a main folder should be possible. This is not possible now.
Is everything clear? I'm not a network specialist or something, I just want to give some co-workers access to some data on my computer without problems.

So what you need are recursive permissions.
I suggest you create a group and add user1 and user2 to that group. You can name that group whatever you want, but for now i will call it FSUsers
Execute this in terminal. Replace FSUsers with your new group
sudo chmod -R +a "FSUsers allow list,add_file,search,add_subdirectory,delete_child,readattr,writeattr,readextat tr,writeextattr,readsecurity,file_inherit,directory_inherit" /Users/Shared/*
Replace /Users/Shared with the location of your shared folder. Make sure you keep the /* at the end (this allows all subfolders and files to get the same permissions.
If you need to add people to the share just add them to the FSUsers group, the FSUsers group should should also be allowed in the sharing preferences.

I have iCloud set up fine on Windows 8 and it pulls shared photo streaming great, The problem is that in My Photo Stream folder the photos doesn't charge automatically and is empty, how can I do?

I have iCloud set up fine on Windows 8 and it pulls shared photo streaming great, The problem is that in My Photo Stream folder the photos doesn't charge automatically and is empty, how can I do?

Hey appleIC!
Here is an article that will help you troubleshoot this issue:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Permissioning and folder sharing issues on domain

We are new to Active Directory. I am experimenting with folder and sharing permissions in an effort to get to where we can secure network folders for access to only certain individuals.
I am running into inexplicable behavior.
On a domain joined server, I have created a folder called "for ITADMIN". This folder should only be accessible to members of the ITADMIN domain security group. I disabled inheritance on this folder first. Then, in the Security
tab, I have set it up such that there are only two security principals in the ACL: SYSTEM and ITADMIN, both of which have full control.
On the Sharing tab, I went to Advanced Sharing and clicked the Permissions button. Here, I set my sharing permissions. There is only one security principal in this ACL, ITADMIN, and ITADMIN is granted full control.
At this point, I am still logged in to the domain joined server with my own user account. My user account is a member of ITADMIN. I can open Windows Explorer and browse through the "for ITADMIN" folder freely.
Now, I log in to our Domain Controller with my user account. In Windows Explorer, I type in the UNC path to the domain joined server hosting our shared folders (\\machinename). I see the shared folder "for ITADMIN". When
I try to go into it, I receive an error:
"Windows cannot access \\machinename\for ITADMIN. You do not have permissions to access \\machinename\for ITADMIN. Contact your network administrator to request access?
I am a member of the ITADMIN group. ITADMIN is the owner of the shared folder, has Full Control security permissions, and Full Control sharing permissions. Why in the world is this behavior occurring?
Additional Info: Could this be a problem when trying to access shares from the domain controller? While I don't anticipate needing to do this from the DC on a production basis, it still seems bizarre.
Additional Info: my ITADMIN group is a global group. Could that be posing a problem?

Nevermind. I neglected to log out and log back in after making permissions changes, thus my account's security token was not getting updated.

What is the functional difference between the /Shared Items and the /Users/Shared folders?

Can someone shed some light on the difference, intended functionality between the /Shared Items and the /Users/Shared folders?

do any/all network services use the Shared Items folder?
Not all services use it. Time Machine Server does, and I'm not sure which others. FTP is not controlled by Server.app.

Users prompted for username and password after sharing removed from servers

Hello Community
    On Sharepoint 2010 Server using the UI in a 2 server farm with an intranet running on it and everything functions as it should. However it was noticed that from a users computer when in "Windows Explorer" if "Network"
is clicked the 2 servers are visible.
    The problem is that when the server are clicked on in Windows Explorer the files and folders on the hard drive of the servers are visible too.
    Subsequently I logged onto the server and when into "Properties' - "Sharing" and
unchecked the checkbox to "Share this folder".
    That solved the problem of the users being able to see and access the files
and folders on servers hard drives but now when the users log onto the intranet
they are prompted for a user name and password and even when they provide the user
name and password and the page is returned the prompt appears on the screen again(then they cancel out).
    What can be done about the user being prompted for username and password without sharing the drives on the servers ?
    Thank you
    Shabeaut

What exactly was shared out from the SharePoint server's file system? There are certain things that are shared by default.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Deleted public folder sharing

I was looking at my iMac and in my home folder there was no public folder, however in file sharing my public folder was said to be shared...
I can create a new folder called public with a sub folder called drop box but it isn't the same as the one OS X creates. I also deleted the sharing of the public folder in the file sharing pane. If I add my own folder that I made, it just says public as the name of the folder shared, not Alex Lyons's Public folder that is there by default when the folder OS X creates is called public in the home folder.
How do I restore this?
Regards

alex.lyons wrote:
ye I am I restored the public folder with the drop box sub folder. On my MBP the drop box sub folder has a special icon but not on the iMac since I restored it... Also, I know how to add new folders to sharing, but how can I add it so it says Alex Lyons's Public Folder, without the folder being called that?
it's possible but surprisingly tricky so you might want to leave it alone. see the post by biovizier in this thread:
http://discussions.apple.com/thread.jspa?messageID=8041195#8041195
you'll have to log in as root and edit the file he mentioned using some plist editor like Property List Editor which is part of developer tools.

Keeping CMS database and FRS backups in synch

I am in the process of upgrading to BOE XI R3.1 from CE 10 and am looking at our backup and recover plan.
We are planning on implementing 2 BOE Xi R3.1 servers with a clustered CMS. Our CMS database will be running on a remote SQL Server (2005) farm that will be immediately replicated to our secondary site using SRDF.
The FRS will be local to each BOE XI R3.1 server. We are thinking of immediately replicating the FRS from the primary location to the secondary location using DFS but I worry about the FRS and the CMS possibly being out of synch when we try to restore.
By trying to have backups up to the latest instant am I looking for trouble? if this is manageable, am I going about it the right way?
In our CE 10 deployment we have a CMS database backup at midnight and the FRS is Robocopied at 12:15. I'm just looking to improve upon this.
Thanks

Right both BOE servers will point to the FRS on the primary BOE server and the primary CMS database on the SQL server farm. Then we replicate the primary FRS to the secondary FRS located on the secondary BOE server and the primary CMS database to the secondary CMS database both on the SQL Server farm.
If we need to we'll switch the primary and secondary BOE servers to the secondary FRS (located on the secondary BOE server) and the secondary CMS database on the farm.
I guess what I'm looking for is the best practice for the backup. I think what I'm hearing is the best route to go is to have the backups as often as you want but the best way to ensure that the backups are in synch is to do them when the CMS and FRS servers are down. Otherwise they could be out of synch with report requests being executed at the same time.
Right?
Thanks again

HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50

i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrong

masterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message?

Can't see the SYSVOL and NETLOGON folder into newly migrated server

Hi,
I have recently promoted and migrated FSMO role to my new Additional Domain controller but after migration I can't see SYSVOL and NETLOGON folder into new domain controller. Even I can't add any backup domain controller to newly migrated domain controller.
Regard;
Jitendra Gautam

Hi
How much time it should take to advertise because it become more than 20 days after promotion of new DC. When I run dcdiag and I found that :
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = NEWDC
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\NEWDC
      Starting test: Connectivity
         ......................... NEWDC passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\NEWDC
      Starting test: Advertising
         Warning: DsGetDcName returned information for
         \\OLD DC.domain.name, when we were trying to reach
         NEWDC.
         SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
         ......................... NEWDC failed test Advertising
      Starting test: FrsEvent
         ......................... NEWDC passed test FrsEvent
      Starting test: DFSREvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared. Failing SYSVOL replication problems may cause
         Group Policy problems.
         ......................... NEWDC failed test DFSREvent
      Starting test: SysVolCheck
         ......................... NEWDC passed test SysVolCheck
      Starting test: KccEvent
         ......................... NEWDC passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... NEWDC passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... NEWDC passed test MachineAccount
      Starting test: NCSecDesc
         ......................... NEWDC passed test NCSecDesc
      Starting test: NetLogons
         Unable to connect to the NETLOGON share! (\\NEWDC\netlogon)
         [NEWDC] An net use or LsaPolicy operation failed with error 67,
         The network name cannot be found..
         ......................... NEWDC failed test NetLogons
      Starting test: ObjectsReplicated
         ......................... NEWDC passed test ObjectsReplicated
      Starting test: Replications
         ......................... NEWDC passed test Replications
      Starting test: RidManager
         ......................... NEWDC passed test RidManager
      Starting test: Services
         ......................... NEWDC passed test Services
      Starting test: SystemLog
         An error event occurred. EventID: 0xC00010DF
            Time Generated: 10/07/2014   17:11:03
            Event String:
            A duplicate name has been detected on the TCP network. The IP addre
ss of the computer that sent the message is in the data. Use nbtstat -n in a com
mand window to see which name is in the Conflict state.
         An error event occurred. EventID: 0xC00010DF
            Time Generated: 10/07/2014   17:14:13
            Event String:
            A duplicate name has been detected on the TCP network. The IP addre
ss of the computer that sent the message is in the data. Use nbtstat -n in a com
mand window to see which name is in the Conflict state.
         An error event occurred. EventID: 0xC00010DF
            Time Generated: 10/07/2014   17:15:31
            Event String:
            A duplicate name has been detected on the TCP network. The IP addre
ss of the computer that sent the message is in the data. Use nbtstat -n in a com
mand window to see which name is in the Conflict state.
         An error event occurred. EventID: 0xC00010DF
            Time Generated: 10/07/2014   17:15:42
            Event String:
            A duplicate name has been detected on the TCP network. The IP addre
ss of the computer that sent the message is in the data. Use nbtstat -n in a com
mand window to see which name is in the Conflict state.
         An error event occurred. EventID: 0xC00010DF
            Time Generated: 10/07/2014   17:17:27
            Event String:
            A duplicate name has been detected on the TCP network. The IP addre
ss of the computer that sent the message is in the data. Use nbtstat -n in a com
mand window to see which name is in the Conflict state.
         An error event occurred. EventID: 0xC00010DF
            Time Generated: 10/07/2014   17:53:35
            Event String:
            A duplicate name has been detected on the TCP network. The IP addre
ss of the computer that sent the message is in the data. Use nbtstat -n in a com
mand window to see which name is in the Conflict state.
         An error event occurred. EventID: 0xC0001B61
            Time Generated: 10/07/2014   17:54:39
            Event String:
            A timeout was reached (30000 milliseconds) while waiting for the Fil
e Replication service to connect.
         An error event occurred. EventID: 0xC0001B61
            Time Generated: 10/07/2014   17:54:44
            Event String:
            A timeout was reached (30000 milliseconds) while waiting for the Fil
e Replication service to connect.
         An error event occurred. EventID: 0xC0001B61
            Time Generated: 10/07/2014   17:55:40
            Event String:
            A timeout was reached (30000 milliseconds) while waiting for the Fil
e Replication service to connect.
         An error event occurred. EventID: 0xC0001B61
            Time Generated: 10/07/2014   17:55:53
            Event String:
            A timeout was reached (30000 milliseconds) while waiting for the Fil
e Replication service to connect.
       ......................... NEWDC failed test SystemLog
      Starting test: VerifyReferences
         ......................... NEWDC passed test VerifyReferences
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : domain
      Starting test: CheckSDRefDom
         ......................... domain passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... domain passed test CrossRefValidation
   Running enterprise tests on : domain.name
      Starting test: LocatorCheck
         Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
         A Time Server could not be located.
         The server holding the PDC role is down.
         Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
         1355
         A Good Time Server could not be located.
         ......................... domain.name failed test LocatorCheck
      Starting test: Intersite
         ......................... domain.name passed test Intersite
And
"I can't add any backup domain controller..." means I am not able to join the new ADDC to newly promoted server. But I can join the new
ADDC to old DC of which the FSMO roles are transferred to new DC .
I also found that File replication service is disabled while starting it getting the below Error:
"Error 1053: Ther service did not respond to start or control request in timely fashion"
Regards;
Jitendra Gautam

WIndows XP and MacBook file sharing

i want to share files between my MB black and my Windows XP
sharing them over a LAN is the most logical way (no internet, files are too large to be transfered with a flash drive)
i have an airport express that i connect to through airport and the airport express has an ethernet cable running from it to the jack in the back of my windows machine
i know that because it is a direct connection i have to have my IP adresses and subnet mask the same on both machines so i set them that way
in system preferences "windows sharing" is on and "personal file sharing" is on (even tho i no that is pointless for this setup) and my firewall is off
in control panel (windows) i have my firewall disabled
i made a "shared" folder on my windows and i right click > properties > sharing tab > i checked the box that says "share this folder on the network"
after this i'm pretty much in the dark so can anyone help me?
p. s. this post is also posted elsewhere bc i didn't know where to put it
Macbook Black Mac OS X (10.4.8)

On your MacBook look in Network in your finder. Under your workgroup you should see the Windows machine. My workgroup name is MSHOME yours could be something else. Click on it and it should allow you to connect to the windows machine. Just pick which folders you want to connect to and they should come up in your finder window. Now you can use that shared folder just like it was on your MacBook.
TTFN
Doc

I'm desperately waiting for FOLDER SHARING!

By the way, how can i reply to discussions? Tried to reply to a similar question, but didn't find a button to reply.

There should be a blue Reply link below the forum post.
And yes I understand your desperate wait for folder sharing. I am waiting too.

Users folder sharing between 2 Tigers

Hello to everybody!
I've searched within the forum and googled around but I cannot find an answer to my question.
I moved my Users folder to a different partition, and I cloned my Tiger installation to another partition.
So, my situation is like that:
3 partitions, with 2 of them with tiger 10.4.6 and a 3rd with the Users and home folder moved. Now, both systems are sharing the same home folder, but I'd like to have a different home folder for the cloned system. But I don't know how to proceed: in the 3rd partition I have the Users folder, and I don't know if I can share this folder between two different istances of Tiger.
I don't know if proceeding in this way can create some troubles to the system or if there is a better way to follow.
I hope this is the right forum to post this question, and many thanks for any help.
Regards,
Libero Mureddu
ibook g4 Mac OS X (10.4.6)

Or your suggestion is to have the home
folders each one in the same partition with the
system?Yes, that is my suggestion but
if the "shared" Home is working and it's easy for you
stay with it.
Perhaps someone will come along with more experience
in a set-up like this.
Hi, finally I've found a solution that works for me!
Actually, thanks to an expert, friend of mine (Thanks Santtu!), I've adapted the suggestion on the Mike Bomich Tips page to my situation. http://www.bombich.com/mactips/homedir.html
On the data partition, I have now a folder called "Users" that contains the home folder for the system1. On the same level I have now a folder "foo" that contains the "Users" folder (and the home folder) for system 2. In that way both systems have now a different and separated Users folder, and still I can have my data separated from the system.
The commands in Bombich article are:
sudo ditto -rsrcFork /Users /Volumes/OtherPartition/Users
sudo niutil -createprop / /users/username home \
/Volumes/OtherPartition/Users/username
sudo ln -s /Volumes/OtherPartition/Users /Users
My solution (very simple!) is just change the path to the Users folder.
sudo ditto -rsrcFork /Users /Volumes/OtherPartition/foo/Users
sudo niutil -createprop / /users/username home \
/Volumes/OtherPartition/Users/foo/username
sudo ln -s /Volumes/OtherPartition/foo/Users /Users
Of course, I didn't remove the original Users folder, because I still need it for the other system.
Thank you very much for your help!
Libero Mureddu
ibook g4 Mac OS X (10.4.6)

Outlook folder sharing questions

I'm trying to share a folder within someone's inbox and it's not working like I think it should be. The user in question is using Outlook 2007, I'm using Outlook 2010 and we're connected to the same Exchange 2010 server. This person wanted to
share a folder they had within a PST file and I know, it can't be done this way. So I had them move the folder to the top level of their Exchange mailbox (not within the Inbox, as another mail folder). I had them set full permissions for me to
both their exchange mailbox and this folder.
I now go to my Outlook 2010, File/Open/Another users folder. I pick the user and first of all, the dropdown only has the basic folder types in it. I don't see the folder she moved there. Fine so I choose Mail Items and hit ok. It
says "Cannot Display the foler. The Inbox cannot be found".
Why? Have have full permission to her Mailbox and the folder in question. Why can't I open anything?
Thanks!

Hi,
We can't open a custom folder by clicking File > Open > Other User's Folder in Outlook though we have permission to this shared folder. As for your issue, since you have full access permission to the shared mailbox, we can directly open the
whole mailbox by adding additionally mailbox in Outlook. Then the custom folder would be listed under the shared mailbox.
To open another mailbox in Outlook, please follow these steps:
1. Click File > Account Settings > Account settings.
2. Double click the Exchange account, click More Settings.
3. In Advanced tab, Add the mailbox you have full access permission.
4. Click OK to finish it.
Hope it helps.
Regards,
Winnie Liang
TechNet Community Support

Beehive enhancement for tomorrow: re-add the OBEO sub folder sharing option

OK, I inadvertently posted a comment meant for an enhancement to be posted tomorrow, so here we go with tomorrows enhancement of the day:
Talking once more about delegation... There's quite a big fly in the ointment we need to talk about:
While delegation granting dialogues in OBEO and bcentral take care of permissions for default folders like inbox, sent items, drafts etc. and pseudo folders like calendar or contacts, it does not so for non-default folders.
We have the case of a superior that has a widely ramified folder structure and granted his secretary access to parts of it. When the secretary changed he changed delegation, and this did not change the non-default acls.
So far nothing unspectacular. The issue is, that there is no option in OBEO to define permissions tree-wise (nor is there in beectl), so the superior had to walk the whole directory hierarchy to adapt the permissions, each folder requiring multiple clicks.
There was a permissions dialogue for that in OBEO 1.5, but has been dropped.
There is an enhancement request I'd ask you to second through MOS:
10065126: READD THE SUB FOLDER SHARING OPTION TO OBEO
This ER had the status approved for future release, but product management changed its plans and put it to "Suggestion Rejected".
a related ER is the following:
12557969: OBEO PERMISSIONS DIALOGUE SHOULD HAVE A TREE OPTION
"The Beehive platform is designed from the ground up to be easy to manage." (cited from "Oracle Beehive: A Flexible Collaboration Platform for the Enterprise") - let's hope product management will give us tree perms management, at least in OBEO.
Thanks, Tom

As currently product management does not seem to be considering
readding the desired dialogue (nor a tree switch for beectl perms
related commands) lets look at our workaround.
Lets look at it in an example: user user_a has set up a delegation to
user_b, allowing access to his inbox.
If you have set this up (using OBEO or BCentral as alternatives) a new
Principal Record has emanated, that you can list with "beectl
list_users":
bhowner@bhhost:~> beectl list_users email addr@mydomain show more
Display Record: 1
===========================================
User Identifier: user=user_a
Family Name: user_a
Principal Record: 6
===============
Principal Identifier: pcpd=145F:5618:user:9B37CFDA0D624736B413FEF81573597400000000000E -> 145F:5618:user:D8D547BB10AD4C079CE3A2604996535B000000000000,user=user_a
Principal Name: 145F:5618:user:9B37CFDA0D624736B413FEF81573597400000000000E -> 145F:5618:user:D8D547BB10AD4C079CE3A2604996535B000000000000
Delegated Principal: Yes
DELEGATOR: user=user_a
DELEGATED TO: user=user_b
Lock status: UNKNOWN.
bhowner@bhhost:~>
An ACL to the inbox has been generated:
bhowner@bhhost:~> beectl list_local_acl --entity "fldr=Inbox,wksp=user_a's Personal Workspace,enpr=myenpr"
------------------------------------------------------------------+-------------
accessor | access_types
------------------------------------------------------------------+-------------
------------------------------------------------------------------+-------------
pcpd=145F:5618:user:9B37CFDA0D624736B413FEF81573597400000000000E | +RWDO
-> 145F:5618:user:D8D547BB10AD4C079CE3A2604996535B000000000000,us |
er=user_a |
------------------------------------------------------------------+-------------
Listed LocalACL for entity 'fldr=INBOX,wksp=user_a's Personal Workspace,enpr=myenpr'
bhowner@bhhost:~>
Now we need to generated similar ACLs for all subfolders of
exampl-fldr, which, being a non-default folder, did not receive any
ACL:
So let's connect to BEE_DATA on the BEEDB, preferrable through SQLDeveloper, and run
SELECT 'beectl add_local_ace --entity "'
||trim(TO_CHAR(c.enterprise_id,'0XXX'))
||':'
||trim(TO_CHAR(c.site_id,'0XXX'))
||':'
||c.container_type
||':'
||c.eid
||'" --accessor "pcpd=145F:5618:user:9B37CFDA0D624736B413FEF81573597400000000000E -> 145F:5618:user:D55B885774B6457AA0489F596D7DF873000000000000,user=user_a" --access_types "+RWDO"'
-- , f.name,
-- , c.path
FROM bee_data.ws_real_folders f,
bee_data.ocs_containers c
WHERE f.eid=c.eid
AND c.path LIKE '/dla/user_a''s Personal Workspace/exampl-fldr%'
AND c.container_type='afrh'
This will generate the beectl commands necessary to work around the
missing switch. You need to run those commands afterwards.
Of course this is not supported, but your only alternative is
right-clicking all of the subfolders of exampl-fldr and grant the new
user access manually.
I would be happy if Oracle would enhance this are of user and rights
management of beehive.
Regards, Tom
Edited by: snmdla on Jan 23, 2012 4:20 PM

Clustering and FRS folder shared

Similar Messages

Maybe you are looking for