Clustering and Workspaces

I have read that this is in the works for a future release. But has
          anyone heard what version and when?
          Thanks,
          Dan

Hi,
Clustering is only supported by the database platform DB2 for Linux, UNIX, and Windows.
You can use partitioning to improve the performance of other databases.
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/frameset.htm
Thanks & Best Regards,
Rajani

Similar Messages

Error while creating a workspace and workspace user

Hi Everyone
I have installed oracle 11.1.0.7 on our server and the os is windows server 2008. I tried creating a new workspace and workspace user using the repository assistant on the server itself i mean i am using OWB which comes along with the 11g database. It is installing 60% and at the end it gives me this error:
The warehouse builder workspace installation failed Java.Sql.SQLexception ora -00942 table or view does not exist
How can i deal with this error? any suggestions ?
Thanks & Regards
Subhasree

Hi everyone,
I got the same problem. It is very urgent to get an answer.
Thanks
Siegwin

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

HFM and Workspace 11.1.2.0 issues with opening Apps and reports via web

Hi,
we are running decentralized environment where we have HFM Web and App servers on Windows 2008 Server SP2 and few shared elements like OHS, HSS (Shared Services) and Workspace service from Solaris 10 SPARC (64bit) server.
The base version is 11.1.2.0 and on Windows we have fixes from 1-9 installed whereas on top of Solaris we have no fixes/patches yet installed.
When we test workspace from web server desktop connecting to Solaris server it seems traffic is fine as Apps are available and browsing them seems to work normally = Webserver is able to locate Workspace on Solaris, Workspace is able to connect to HFM App server and App server again able to connect HFM App db container.
When we access to workspace url over web (the traffic according to my understanding should go via OHS to Webserver and then redirect to Solaris server Workspace and then like mentioned above.
Something gets wrong here as when accessing Workspace url we get non-showing icons, $ characters in messed up menu rows and few error messages like :
- Invalid or could not find module configuration
- Required application module hfm.appcontainer is not configured. Please contact your administrator
- Namespace Communication Error
Also opening test report via web url workspace gives error:
Required application module reporting.reportViewer is not configured. Please contact your administrator.
+
Namespace Communication Error
Our experience from previous lower environment was that symptons like described might be caused by wrong service start order. Thus we tried to review this carefully and boot in correct order, but still problems. Also, boot order shouldn't be totally wrong as workspace works when using directly from Web server.
If any of mentioned symptons rings anyone's bell please reply.
Something still in firewalls or rather in configuration, OHS maybe?
At this point we don't yet dream of proper loadbalancing or High availability, but rather get this single web and single app server server + shared elements from Solaris server to work without error messages.
We do know that release 11.1.2.1 is supposed to fix many things, but we need to get this 11.1.2.0 working in a way or another.
Thanks for any tips that might arise.
Br, MK
Edited by: user9327521 on Nov 30, 2010 4:55 AM

Were u able to ever resolve this? And how?
Thanks,
Sejal

Shared services and workspace login error in epm 11.1.2.3

Hello,
When click on the url of shared services and workspace for epm 11.1.2.3
showing the below error as soon.
"Internet explorer can not display the webpage error"
Tried with all supported browsers
Please suggest all possibles solutions..
Thanks

Have you check the logs to make sure all the web apps are up and running and no errors are being generated.
Cheers
John
http://john-goodwin.blogspot.com/

Array of clusters and in the cluster is a bar meter, how can I change the color individually?

Array of clusters and in the cluster is a bar meter, how can I change the color of the bar meter individually for each element of the array? I have just figured out that you can't change properties of one element of the array without all elements changing. For the scaling I had to make numeric indicators for each tick of the scale so that each bar meter in the clustered array would have individual scales. I also had to do some math to scale each barmeter to display correct proportions from 0 to 100%. Now I'm stumped on the color of the bar meter. Basically, if the value goes over a setpoint, the bar meter needs to turn red. It has to be in an array to be infinitely scalable.
Thanks
Matt
Solved!
Go to Solution.

You can't do that-
without a little trick.
You could consider laying a custom color box over the bar graph in the cluster you can set the color based on the value of the bar graph or even make a "Pseudo"- bar graph using a series of color boxes stacked to look lie a bar and changing values of the Color boxs from empty to full to red.
Here is an example to demonstrate
Jeff
Attachments:
Pseudo bar.vi ‏12 KB

Group and workspace Participant report

I've a large beehive group for a customer with many participants and workspaces. I need to generate a report for all participants in the group with details of what access they have to each workspace. Is there any easy way to do this?
Thanks

Hi,
Go to https://beehiveonline.oracle.com/BOLAdmin.html - navigate to the "My Managed Workspaces" > click on the Workspace and there is a grey button which will generate a Workspace membership report.
Phil

BPM Composer and workspace login using OID

I have configured my weblogic to use OID for user and roles management. I am able to login as me when I access weblogic console and em (I am a member of administrator group). When I tried to login to BPM Composer and workspace, I have to login as weblogic user (the user from weblogic embedded ldap from my install). How to configure the BPM composer and workspace to use OID that I've configured in WLS?
Thanks.

Never mind. I solved this problem. Just need to ensure all the authenticator control flag set to SUFFICIENT.

Schemas and workspaces in Apex 3.0

Hi Friends
We are quite new to HTML DB. We have few queries pertaining to schemas and workspaces.
We are developing an application in workspaces X which is associated with database user/schema X. We need to give this application for testing to the users. For that we need to have different set of environment so that it does not hamper our development.
So what should be our plan of action.?
Currently we have created a different database user/schema in the same database and associated a different workspace Y to it. But we are facing import/export issues across the workspaces. We have already raised this issue in the forum.
Can we have same workspace associated with 2 different database schemas/users? If yes, then how does HTML DB handle the same?
Thanks in advance.
Regards
Minakshi

Hi Friends,
As per Scott's suggestion, we attached our workspace X to 2 schemas A and B. Then we exported the app say 555(here the schema is A) and imported it using the parsing schema B in new application id say 500. But now the real problem starts. If we have added some new functionality in a page in our application 555 and now only that page we want to export and import it in application 500, then it gives error as "This page was exported from a different application or from an application in different workspace. Page cannot be installed in this application." So in the sql file that we exported, we changed few things as follows(marked in bold)
--application/set_environment
prompt APPLICATION 500 - Load_Factor_System
-- Application Export:
-- Application: 500
-- Name: Load_Factor_System
-- Date and Time: 12:01 Monday May 21, 2007
-- Exported By: ADMIN
-- Flashback: 0
-- Export Type: Page Export
-- Version: 3.0.0.00.20
-- SET APPLICATION ID
wwv_flow.g_flow_id := 500;
wwv_flow_api.g_id_offset := 0;
After we changed the export file as above and then tried to import it in application 500 it gives error as "ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-00001: unique constraint (FLOWS_030000.WWV_FLOW_PAGE_PLUGS_PK) violated <pre>declare s varchar2(32767) := null; l_clob clob; l_length number := 1; begin s := null; wwv_flow_api.create_page_plug ( p_id=> 6303905775095939 + wwv_flow_api.g_id_offset, p_flow_id=> wwv_flow.g_flow_id, p_page_id=> 1020, p_plug_name=> 'User Master', p_region_name=>'', p_plug_template="
Can anybody please help us with this issue? The other solution for this is to delete the complete application 500 and then freshly install the application. But we do not want this since any change in few pages should not result in deletion of complete application.
Also Scott, thanks a lot for your detailed solution as to how to put an example on apex.oracle.com. We shall definitely put an example and post it.
Regards
Minakshi

Error Registering Planning and workspace

Hello all,
when I try to register Planning and Workspace against the Shared Services on EPM 11, I get the following error message:
(Apr 07, 2010, 11:54:50 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Apr 07, 2010, 11:54:50 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Would anyone know how to solve that?
Thanks

Hi there,
i am also getting the same exact error message , the only difference is i am getting it while registering the HFM application and for me Planning went through smoothly.
(May 05, 2010, 09:52:51 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(May 05, 2010, 09:52:51 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: error.slideAuthorization.Registeration failed: error.slideAuthorization.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)

Shared services and workspace architecture(How we can find out req &respon)

Good morning Hyperion folks,
Does any body have any document or PDF about workspace and shared service architecture...How these both components are communicate each other..any idea or any document..while communicating of these if anything goes wrong,,where we need to check, what is exactly the problem (any suggestible logs)...
Company are doing big mistake by using this hyperion tool ..These guys are not supporting and even they don't know much about the tool apart Product dev team..and that too they are not disclosure any documents related product...
**Does anybody found any kind performance tunning guide or lab guide about workspace and shared service HFM,Planning...** I have never seen component wise documents and tunning guide and recommendations.
I am strong opnion about hyperion is,we would not get any support from oracle and documents so He can migrate Cognos TM1 and Finance management etc........
Edited by: 888154 on 29/09/2011 02:55

Thanks john For ur reply ..i have seen these documents long ago ..i am asking about Shared services and workspace architecture and how these are functioning and where we can find out communication error and slow login issue with workspce and shared services.. How authentication is log on ..is there any machanisam they are using for authencation ...We are using OpenLadp ...
Ex :1.Per suppose log on to workspace that request goes to shared services directory and it will check whether that user is exists or not on Shared services tables ...here what kind of alogirtham using to aunthenticate user...How we can diagonse this process taking to much time,,,is there any specific logs related this (If logs are exsits how we can find out)...
2.Once authencation done successfully and responce send to workspace and populate workspace home page...then i click on application button (FM application) and it's taki ng to much time to load HFM page.To this where we need to look whta excatly problem? what are logs file helpful to us to diagonse..

How to enable Kerberos - Shared Services and Workspace

Hi All
I'm trying to enable Kerberos SPNEGO with WebSphere 6.1.0.31. I've protected the urls.....and i can see the handshake happening in the trace logs.....
Shared Services SSO is working fine if i use the option of Get Remote user info from http header.....
But workspace doesn't seem to accept any of the options given $REMOTE_USER$, $HTTP_USER$.
Can some please let me know how to do this....? Or is there a way to change the header information?

Thanks john For ur reply ..i have seen these documents long ago ..i am asking about Shared services and workspace architecture and how these are functioning and where we can find out communication error and slow login issue with workspce and shared services.. How authentication is log on ..is there any machanisam they are using for authencation ...We are using OpenLadp ...
Ex :1.Per suppose log on to workspace that request goes to shared services directory and it will check whether that user is exists or not on Shared services tables ...here what kind of alogirtham using to aunthenticate user...How we can diagonse this process taking to much time,,,is there any specific logs related this (If logs are exsits how we can find out)...
2.Once authencation done successfully and responce send to workspace and populate workspace home page...then i click on application button (FM application) and it's taki ng to much time to load HFM page.To this where we need to look whta excatly problem? what are logs file helpful to us to diagonse..

Relationship between user and workspace

If I create workspace W1 and then create user U1 assigning him to W1, do I also need to create the user again if he will be using workspace W2? In other words, does the user have to be created for each workspace he is going to use or just once for all workspaces?

You don't create a "user".. In Oracle you create a schema, that is a container for a set of database objects owned by that account. A workspace is just a container in APEX that contains the objects and schemas that are used in your applications..
Schema 1 can be in workspace 1 and workspace 2 and workspace 3..
Thank you,
Tony Miller
Webster, TX
I am a Ranger! We walk in the dark places no others will enter! We stand on the bridge and no one may pass! We live for the One, we die for the One!
Anla-shok Credo from Babylon 5

Process Administrator and Workspace admin url for 10gR3

I am running 10gR3 bpm locally.
Url to access my local workspace is http://localhost:8585/workspace/faces/jsf/workspace/workspace.xhtml
Could you let me know the URL for accessing the process administrator and workspace admin.
Thanks in advance.

Looking at your port 8585 it is the default port for Studio, in Studio there is no webconsole or workspace administrator, those applications only are available in enterprise.
If your case is enterprise then the url is /webconsole and /portaladmin
HTH

Clustering and Workspaces

Similar Messages

Maybe you are looking for