Clusterware Installation Error - Unable to connect via private node names

Hi,
I am trying to install Oracle 10g Clusterware on a VMware two node cluster, Linux OS.
Before starting to install the clusterware, I made sure the equivalency check passes. Also I can ping from one node to the other using the node names rac1 and rac2, and with the vips - rac1-vip and rac2-vip. However, I cannot ping the nodes, using the private IP names - rac1-priv and rac2-priv.
I have checked both the /etc/hosts and they are all setup appropriately, as shown below. Is there something that I have not set up properly? Thanks in advance...
For RAC1
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1     rac1.com     rac1     localhost.localdomain     localhost
192.168.1.68 rac1.com rac1
10.10.10.25 rac1-priv.com rac1-priv
192.168.1.134 rac1-vip.com rac1-vip
192.168.1.70 rac2.com rac2
10.10.10.26 rac2-priv.com rac2-priv
192.168.1.135 rac2-vip.com rac2-vip
FOR RAC2
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1     rac2.com     rac2     localhost.localdomain     localhost
192.168.1.68 rac1.com rac1
10.10.10.25 rac1-priv.com rac1-priv
192.168.1.134 rac1-vip.com rac1-vip
192.168.1.70 rac2.com rac2
10.10.10.26 rac2-priv.com rac2-priv
192.168.1.135 rac2-vip.com rac2-vip

Here it is ...
Please note that I have changed my default gateway to 192.168.1.1 now.
This is the information for node 1.
[root@rac1 network-scripts]# /sbin/ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:75:02:0D
inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe75:20d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19946 errors:0 dropped:0 overruns:0 frame:0
TX packets:16470 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1731850 (1.6 MiB) TX bytes:7203843 (6.8 MiB)
Interrupt:185 Base address:0x2000
eth1 Link encap:Ethernet HWaddr 00:0C:29:75:02:17
inet addr:192.168.1.68 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe75:217/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3054 errors:0 dropped:0 overruns:0 frame:0
TX packets:64 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:378063 (369.2 KiB) TX bytes:3360 (3.2 KiB)
Interrupt:169 Base address:0x2080
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5000 errors:0 dropped:0 overruns:0 frame:0
TX packets:5000 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6717014 (6.4 MiB) TX bytes:6717014 (6.4 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[root@rac1 network-scripts]# traceroute 10.10.10.25
traceroute to 10.10.10.25 (10.10.10.25), 30 hops max, 38 byte packets
1 192.168.1.1 (192.168.1.1) 12.792 ms 1.447 ms 5.020 ms
2 * * *
3 * * *
4 * * *
5 * * *
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * *
[root@rac1 network-scripts]# traceroute 10.10.10.26
traceroute to 10.10.10.26 (10.10.10.26), 30 hops max, 38 byte packets
1 192.168.1.1 (192.168.1.1) 4.896 ms 6.904 ms 4.628 ms
2 * * *
3 * * *
[root@rac1 network-scripts]# cat /etc/resolv.conf
nameserver 192.168.1.1
[root@rac1 network-scripts]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
[root@rac1 network-scripts]#

Similar Messages

  • TS3988 As i Sign In To icloud on my iphone 5 via my apple ID its giving error unable to connect to server

    As i Sign In To icloud on my iphone 5 via my apple id its giving error unable to connect to server this is happen after ios7 update only once it has sign in after ios 7 now its asking to accept terms and condition its giving the above error i have deleted the icloud account and again trying to sign in via same id still the same problem

    Do you have an iCloud account yet (go to www.icloud.com and login to verify that you do).

  • BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data

    Hello Experts,
    I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
    [http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
    I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
    Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
    But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
    Database error: Unable to connect to SAP BW server Incomplete logon data -
    If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
    I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error -  CALL_FUNCTION_SIGNON_INCOMPL
    Desired outcome:
    I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP'  authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
    Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
    Any help in this matter would be greatly appreciated.
    Thanks & regards,
    CD.

    Hi Simone,
    Thank you for the reply.
    Here are the things done by me.
    1. Generated the keystore file and imported it in BI 4.0 CMC on  SAP Authentication Option tab
        ([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
        ([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
    2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
        ([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
    3. BW Roles/Users have been imported into CMC.
    4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
        ([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
    I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
    I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
    Thanks & regards,
    CD.

  • BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

    Hello Experts,
    I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
    I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
    Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
    But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
    Database error: Unable to connect to SAP BW server Incomplete logon data -
    If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
    I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
    Desired outcome:
    I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
    Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
    Any help in this matter would be greatly appreciated.
    Thanks & regards,
    CD.

    Whether your problem is solved?
    We have the same problem in BO Mobile.
    Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

  • HP Device Toolbox software Error Unable to connect to the printer

    Hi guys,
    I'm currently in bit of a nightmare with my HP Laserjet 100 color MFP M175nw. 
    Basically I have upgraded to a new wireless router and since doing this my HP Laser Jet refuses to work / connect to the wireless network.
    I have literally tried just about evey thing I can to get it to work, thoroughly through the manual, uninstalled and reinstalled the software about 12 times, tried firewalls on and off, tried security on the router on and off, tried WPS mode, tried manually entering in the IP address into the printer all without luck. You can see my dedicated thread here
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/HP-LaserJet-Pro-100-color-MFP-M175nw-un...
    So currently I have the printer connect to the computer via USB and it works, so I decided to try using the HP Device toolbox software  to see if it would give me any more options to try and when I run this software I get
    Error: Unable to connect to the printer, make sure your printer is properly connected and powered on and then try to open the HP device toolbox again. Arg!!!
    My new router is a Billion 7800DXL, my old router which worked in wireless mode was also a Billion 7300g.
    Any help would be great really stuck here

    Hello tf22raptor.
    I see that you're now experiencing an issue getting the Device Tool box to run. I will try and assist with this.
    After reviewing this post and the other thread, I have a few things you can try.
    1) Run MS Fix it utility to uninstall the software: Fix problems that programs cannot be installed or uninstalled.
    (This is to make sure the software is completely removed and conflicts in the registry get resolved)
    2)Msconfig: press windows key and R on the keyboard> in run box type "msconfig"> on window select "services tab"> check box next to "hide all MS services> press disable all> go to "startup" tab> press disable all> press apply and ok at the bottom> this should prompt a PC restart.
    Please restart.
    3) Re-install via USB
    4) Try running the device toolbox now
    5)If still having issues installing wireless, you may have to contact the router manufacture.
    I hope this helps you out. Thanks for posting on the HP Forums.
    I worked on behalf of HP.

  • I am getting the error "Unable to connect to data warehouse management server" when I try to register it DWMS

    I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
    2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
    out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
    tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

    unplug modem and router and reboot.
    check setting for network, verify password.
    sign in.  Enter computer information.
    let me know if this works.

  • XL Reporter error Unable to Connect to SAP Business One DI API

    Hi Experts,
    Im getting this error on one of our clients' workstations.
    They have SAPB1 2005A PL 31.
    We've tried uninstalling and reinstalling the DIAPI and the whole client application as well.  Same error.
    It als gives an error after the initial error that says:
    "Security Settings in Microsoft Excel prohibit XL Reporter from running."
    Any suggestions?
    Thanks!

    hi jairus,
    To fix this XLR error 'unable to connect to SAP Business One DI API', do the following:
    1. Go to control panel and uninstall SAP DI API
    2. Run %temp%
    3. Rename the folder SM_OBS_DLL
    4. Go to the patch level package of the patch level you are using and install DI API. If you get a message that the installation already exists, ignore the message and proceed to install DI API.
    XLR should work properly.
    Best Regards,
    David

  • TS3899 getting an error, "unable to connect to server" when trying to access his yahoo email account. no different user name/wifi is off.

    getting an error, "unable to connect to server" when trying to access yahoo email account.  I did not change my password, but now everytime I try to access my email from my IPhone 4s, I get the error.

    Try the Yahoo mail app.

  • Getting an error unable to connect to iTunes when I try to download games through apples app, says try again when I do it gives me an Fatal error unable to connect?

    Getting an error unable to connect to iTunes when I try to download games through apples app, says try again when I do it gives me an Fatal error unable to connect?

    Hi LeAnn,
    There have been several posts tonight with this issue. I would suggest waiting until tomorrow and then try again. There may be an issue with the server you are connecting to.
    Cheers,
    GB

  • We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

    We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means  

    Hello,
    Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
    For example:
    Report server:http://uebi.cloudapp.net/reportserver
    Report manager:http://uebi.cloudapp.net/reports
    If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a  virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
    on port 80.
    Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • C028 unable to connect to siebel gateway name server while enterprise installation

    Dear All,
    I am getting this error while setting up an enterprise in the gateway server.The configuration wizard is failing with the error
    "C028 unable to connect to siebel gateway name server"
    Kindly request to assist, the server needs to be delivered on priority
    I checked the gateway..cfg this seems to be fine and the gateway server is up and running.
    The name server log says the following,but the username and password of sadmin is same as configured in DB
    2021 2014-09-04 15:14:20 0000-00-00 00:00:00 +0100 00000000 001 003f 0001 09 GtwyNS 19368 1081086784 /data/siebel/sia811/gtwysrvr/log/NameSrvr.log 8.1.1 [21111] ENU
    DBCLog DBCLogError 1 0000000254084ba8:0 2014-09-04 15:14:20 ㈵″㐴8쾈䃬쯌䀔꼄ࢂ쯌䀔쾨䃬ȁ䀇꼄ࢂ,
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8쾈䃬쯌䀔꼄ࢂ쯌䀔쾨䃬ȁ䀇꼄ࢂ,
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000254084ba8:0 2014-09-04 15:14:20 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000254084ba8:0 2014-09-04 15:14:20 1089268624: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000254084ba8:0 2014-09-04 15:14:20 1089268624: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    DBCLog DBCLogError 1 0000000354084ba8:0 2014-09-04 15:14:20 ㈵″㐴8
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000354084ba8:0 2014-09-04 15:14:20 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000354084ba8:0 2014-09-04 15:14:20 1104309136: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000354084ba8:0 2014-09-04 15:14:20 1104309136: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    DBCLog DBCLogError 1 0000000454084ba8:0 2014-09-04 15:14:31 ㈵″㐴8
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (secmgr.cpp (2679) err=4597538 sys=0) SBL-SEC-10018: ㈵″㐴8
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (secmgr.cpp (2735) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    GenericLog GenericError 1 0000000454084ba8:0 2014-09-04 15:14:31 (client.cpp (309) err=4597527 sys=0) SBL-SEC-10007: The password you have entered is not correct. Please enter your password again.
    SisnTcpIp SisnSockError 1 0000000454084ba8:0 2014-09-04 15:14:31 1104309136: [TCPIP-server] recv() failed for sd=-1 (err=9 | Bad file descriptor)
    SisnTcpIp SisnSockError 1 0000000454084ba8:0 2014-09-04 15:14:31 1104309136: [TCPIP-server] send() failed for sd=-1 (err=9 | Bad file descriptor)
    Please let me know what else can be checked.Kindly request all to assist me because this server needs to be delivered asap.Let me know if more details is required. Please assist.I checked multiple possibilities even re configuring the gateway server :-( :-( 
    Regards,
    Pramodh

    Hi,
    i have the same problem, i want to use different schemas on db, i have the schema siebel/sadmin and other schema siebelA/sadminA, i'm installing siebel on linux redhat 6.5, and when i'm on Siebel Server Configuration and i write the user and passw sadminA/sadminA i get the error c028 C028 unable to connect to siebel gateway name server, i made the test by sqlplus using sadminA/sadminA and is ok, i made the test configuring to the schema siebel/sadmin and pass, i need to change some for siebel can work with another schema? i'm new here and i dont know if is correct to write my question here.
    Thanks in advance
    I add my gateway.cfg
    [InfraNameServer]
    EnableAuditTrail = FALSE
    [InfraSecMgr]
    SecAdptName = DBSecAdpt
    SecAdptMode = DB
    [DBSecAdpt]
    DBSecAdpt_SecAdptDllName = sscfsadb
    DataSourceName = ServerDataSrc
    DBSecAdpt_PropagateChange = TRUE
    [DataSources]
    ServerDataSrc            = Server
    LDAPSecAdpt              = LDAP
    [ServerDataSrc]
    Docked                   = TRUE
    ConnectString            = DemoEnt_DSN
    TableOwner               = SIEBELA
    DLL                      = sscdo90
    SqlStyle                 = OracleCBO
    MaxCachedCursors         = 16
    MaxCachedDataSets        = 16
    ReverseFillThreshold     = 100
    FileSystem               = /u01/app/siebel81/gtwysrvr/fs
    GatewayAddress           = awsdemo:2320
    EnterpriseServer         = DemoEnt
    CurrentSQLID             = %SQLID%
    MaxCursorSize            = -1
    PrefetchSize             = -1
    ChartServer              = localhost:8001
    ChartImageFormat         = png
    [LDAPSecAdpt]
    SecAdptDllName              = sscfldap
    ServerName                  = $(FQDNName)
    Port                        = $(Port)
    BaseDN                      = $(BaseDN)
    SharedCredentialsDN         = $(SharedCredentialsDN)
    UsernameAttributeType       = $(UsernameAttributeType)
    PasswordAttributeType       = $(PasswordAttributeType)
    CredentialsAttributeType    = $(CredentialsAttributeType)
    RolesAttributeType          = $(RolesAttributeType)
    SslDatabase                 = $(SslDatabase)
    ApplicationUser             = $(ApplicationUser)
    ApplicationPassword         = $(ApplicationPassword)
    HashDBPwd                   = $(HashDBPwd)
    PropagateChange             = $(PropagateChange)
    CRC                         = $(CRC)
    SingleSignOn                = $(SingleSignOn)
    TrustToken                  = $(TrustToken)
    UseAdapterUsername          = $(UseAdapterUsername)
    SiebelUsernameAttributeType = $(SiebelUsernameAttributeType)

  • Error: unable to connect to database using user system. please check privil

    Hi All,
    i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
    dblogin userid system, password tiger.
    Error: unable to connect to database using user system. please check privil
    Can you please help me to connect RR database also in GGSCI promt.
    Thanks
    Raja

    Did you try with RR database tns name or sid while connecting ?
    If No then try this ,
    GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
    Password:
    Successfully logged into database.
    HTP
    Annamalai.

  • Error: Unable to connect to database using connection_pool

    Hi experts
    I have created repository and reports on my windows machine using ODBC , Now i have tranfered this to on unix with OCI, But when i am connecting to my dtabase it is showng the error:
    Error: Unable to connect to database using connection_pool
    Please suggest how to resolve this..

    Have you install the Oracle client in your Unix server?

  • CO28: Unable to connect to Siebel Gateway Name Server

    Hello.
    I'm trying to install Siebel on a WinXP machine to familiarize myself with the Case Management module from Siebel. I have tried many times, installing and uninstalling software. I keep getting this error message when configuring a new Enterprise. "CO28: Unable to connect to Siebel Gateway Name Server".
    I've shortened the hostname and removed dashes as prescribed in Siebel Bookshelf.
    I've always made sure the ODBC System DSN is working and authenticating correclty.
    Netstat shows gtwyns listening on 0.0.0.0:2320
    What am I missing?????

    Here's the log contents from sw_cfg_util.log:
    2021 2009-05-21 12:52:03 0000-00-00 00:00:00 -0700 00000000 001 003f 0001 09 sw_cfg_util 2992 1704 C:\sba8123\siebsrvr\log\sw_cfg_util.log 8.1.1 [21112] ENU
    GenericLog     GenericError     1     000000024a150bb0:0     2009-05-21 12:52:03     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     000000024a150bb0:0     2009-05-21 12:52:03     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000031a4a150e34:0     2009-05-21 12:52:28     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 12:52:29     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 13:18:49     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     0000031b4a150e34:0     2009-05-21 13:18:49     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     NSS - ErrCode 4597527 SysErr 0
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩
    GenericLog     GenericError     1     0000031c4a150e34:0     2009-05-21 13:18:52     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server 嗭粑୩୩୩୩୩୩୩

  • Unable to connect to siebel gateway name server .

    unable to connect to siebel gateway name server .
    erro log:
    [TCPIP-client] failed to resolve hostname: siebel82 (err=852198 | Internal: gethostbyname_r ()failed with error. (%sysError))
    //1
    commonutil ValidateSiebelGateway sadmin password 192.168.0.82:2320 // return true
    commonutil ValidateSiebelGateway sadmin password siebel82:2320 // return false
    commonutil ValidateSiebelGateway sadmin password siebel82.cc:2320 // return false
    //2
    [oracle@siebel82]$ ping siebel82
    PING siebel82.cc (192.168.0.82) 56(84) bytes of data.
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=1 ttl=64 time=0.038 ms
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=2 ttl=64 time=0.050 ms
    //3
    [oracle@siebel82]$
    ping siebel82.cc
    PING siebel82.cc (192.168.0.82) 56(84) bytes of data.
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=1 ttl=64 time=0.036 ms
    64 bytes from siebel82.cc (192.168.0.82): icmp_seq=2 ttl=64 time=0.050 ms
    //4
    [oracle@siebel82]$ nslookup siebel82.cc
    Server:          192.168.0.82
    Address:     192.168.0.82#53
    Name:     siebel82.cc
    Address: 192.168.0.82
    //5
    [oracle@siebel82]$ nslookup siebel82.cc
    Server:          192.168.0.82
    Address:     192.168.0.82#53
    Name:     siebel82.cc
    Address: 192.168.0.82
    //6
    [oracle@siebel82 bin]$ uname -a
    Linux siebel82.cc 2.6.32-100.34.1.el6uek.x86_64 #1 SMP Wed May 25 17:46:45 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
    //7
    Installed Top-level Products (2):
    Siebel Enterprise Server 8.2.2.0.0
    Siebel Enterprise Server - enu 8.2.2.0.0
    Thank you for any tips.

    check the connect string in eapps.cfg

Maybe you are looking for

  • Password Criteria in OBIEE 11.1.1.5

    I have install recently OBIEE 11.1.1.5 and i am trying to create new Repository using admin tool when i enter some password (plain text) its' says : "The Repository password does not meet the minimum criteria - at least 1 numeral(s)" i have check loc

  • SLD error after upgrade to SP13

    Hi experts, Our enterprise portal instance has a local sld running in the WAS. Recently, we upgraded from SP09 to SP13. After this, we are not able to connect to sld from webdynpro administrator. Given below is the log file content in SLD. #10 12/23/

  • Fail to install Photoshop Elements 11 from disk

    When I select to install I get a message the autoplay stopped. Windows 8 OS

  • My Premiere Pro CC is not responding on startup

    I've been reading the forums and trying many things get it to work (also, AME is not working) but nothing seems to work.  I recently had a Malware program called Zombie Invasion on my computer and have since removed it which may have had something to

  • Area values button not available in version ECC 6.0

    Hi all, We are changing from version 4.6 to 6.0. I noticed a small change on the layout in transaction FB05 or F-91. I was able to see a box called u201CArea Valuesu201D on old version. Here you can post different values in each depreciation area for