Clusterware Installation (Nodes not reachable....) 10G R2 on Windows

Hello Guys,
I am struck with this problem for quite a long time... I am installing Oracle Clusterware 10G R2 on windows 2000 operating system.
Well i have setup my public, private and virtual IP correctly, i can ping anyone of them.
During installation when it comes to the screen "Specify Cluster Configuration" i have entered the correct information of IPs on each node BUT when i click next button it says "
The following nodes do not appear to be reachable
rac1-vip
rac2-vip
Please check that nodes in the list are up and reachable
while i can ping rac1-vip.beaconhouse.edu.pk and rac2-vip.beaconhouse.edu.pk from both nodes and also the underlying IPs of these names.
Please help me to come out of this problem as i am struk with it.... cant continue installation while i have checked everything again and again...
Please Help...
Regards,
Imran Baig

This thread has already been answered at the DB General forum here: Re: During RAC Installation (Following Nodes do not appear to be reachable.
~ Madrid

Similar Messages

ISE NODE NOT REACHABLE when building distributed deployment

I am trying to build a distributed deployment with the following personas:
2 policy admin nodes
2 monitoring nodes
4 policy service nodes
This was a project that was partially implemented but never in production. It was in a distributed deployment, but half the nodes were no longer working (http errors or devices weren't reachable or could not sync). I decided to start from scratch. All nodes were:
-de-registered
-application was reset to factory defaults on all nodes
-upgraded all 8 nodes to 1.1.4.218 patch 1
-installed all new certs and joined all nodes to the domain
-added to DNS forward and reverse lookup zones
When I make 1 admin node primary and register the other nodes (secondary admin, monitoring, policy services) the nodes successfully register and show up in the deployment window of the primary; however, all the nodes show as NODE NOT REACHABLE. After registration, I've noticed that the registered nodes are still showing as STANDALONE if I access the GUI. I've tried rebooting them manually after registration and they are still unreachable. I have also tried resetting the database user password from the CLI on both admin nodes and the results are always the same.

Originally I had added them all at the same time. I thought that maybe I just wasn't waiting long enough for the sync. I waited an entire day and all the nodes were still unreachable. At this point, I've de-registered all the nodes, rebooted all the nodes, converted the primary back to standalone (the remaining nodes never converted from standalone to distributed even when I rebooted them after registering despite a message that they were successfully registered), converted one node back to primary and tried to register just the secondary admin node giving it plenty of time to sync; this node is still not reachable from the primary.
I've quadruple checked the certificates on all the nodes, these certs were all added on the same day (just last week) and the default self-signed certs were removed.
I had restored from a backup on the primary so I might just rest the config on that node and try joining the other nodes before I restore again.

ISE 1.1.3.124 secondary node not reachable after registration

G'day All,
I'm constantly seeing that the sync and replication status for my secondary admin/monitor node in the primary node as node not reachable. The secondary still thinks it is in standalone mode. When I run the ISE diag tool connectivity tests I am able successfully ping the devices from each other using both hostname and ip and the nslookup also works fine between both nodes. Ping and nslookups also work from different networks within the environment. The two nodes are in the same vlan on a 6500 vss pair but on different switches of the pair. I'm new to ISE so any help is greatly appreciated.
Thanks All.
JS
Sent from Cisco Technical Support iPhone App

Hi Saurav,
Thanks for your prompt repsonse...
I have worked through that section of the document. The registration completes successfully, I've got NTP sync on both nodes and the system time on both nodes is identical.
I am only using the self signed certificates, but following the user guide instructions I have imported the secondary's cert into the primary node.
Just as of about 30 minutes ago, I saw an alarm on the Secondary ISE node stating that a Slow or Stuck Replication has been detected...
As I said in the original post, I can ping the fqdn's from each other so it appears that the DNS requirements have been satisfied.
I've changed the admin account password, I am certain that the ISE DB passwords are correct and the same on both nodes and the timezones for both nodes is the same also....
It looks to me that registration is fine, but the first full replication isn't completing successfully
Thanks,
JS

NODE-NOT-REACHABLE on ISE

Primary ISE node (Serving Admin and Monitor personas) is showing two of the PSNs as "NODE-NOT-REACHABLE" under Replication Status on Deployment page on GUI. It can ping the PSNs and PSNs are actually registered to the Primary admin/monitor node. How can I fix this?
Thanks,
Kashish

Hi,
I found the issue on ny network and it was due to a different dns record.
Simple way to check is issuing a dns lookup from admin node cli of the problem node. Then repeat from problem node attempting to resolve admin node.
Then if that looks good you can issue the command on both nodes...
Show logging application ise tail,
That output should give you a listing of the nodes in the ise deployment and the ip addresses of each node.
Thanks.
Sent from Cisco Technical Support Android App

Why is ADF Bindings node not displayed in Expression Builder window?

Hello,
I'm using Oracle JDeveloper Studio Edition Version 11.1.1.1.0, and I've created a Fusion Web Application and I've configured ADF Authentication and Security for my web project, using the provided wizard.
On a certain page, I've placed a Go Link component, and I'm trying to edit the Text and Destination Property using EL Expressions. When I open the Expression Builder window all I can see are the following nodes: ADF Controller Objects, ADF Managed Beans, JSF Managed Beans and JSP Objects, but no ADF Bindings. I need to access the securityContext properties, and from what I've read in B31974-03, I need ADF Bindings.
Also, I've tryied using the search field from the Expression Builder windows, without any luck.
This is probably a newbie problem, but I really can't figure it out. Please help.
Bogdan.

Hi,
maybe your problem is that you don't have created pageDef related with your page. Try right click on your page and Go To Page Definition. It will create the related pageDef if it does not exist.
Hope this helps
Joseba

Root.sh fails on second node during clusterware installation

I am setting up a test instance of OEL 5.4 using VMware.
I am running the clusterware install and it is failing only on node2. See below.
I followed note 414897.1 on metalink for raw device setup.
Any help would be greatly appreciate.
2010-09-01 11:58:21.084: [ default][1275584]a_init:7!: Backend init unsuccessful : [22]
2010-09-01 11:58:21.091: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]ibctx:1:ERROR: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]proprinit:problem reading the bootblock or superbloc 22
2010-09-01 11:58:21.097: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.139: [ OCRRAW][1275584]propriowv: Vote information on disk 0 [u01/app/oracle/oradata/ocr] is adjusted from [0/0] to [2/2]
2010-09-01 11:58:21.191: [ OCRRAW][1275584]propriniconfig:No 92 configuration
2010-09-01 11:58:21.192: [ OCRAPI][1275584]a_init:6a: Backend init successful
2010-09-01 11:58:21.299: [ OCRCONF][1275584]Initialized DATABASE keys in OCR
2010-09-01 11:58:21.555: [ OCRCONF][1275584]Successfully set skgfr block 0
2010-09-01 11:58:21.557: [ OCRCONF][1275584]Exiting [status=success]...

Oracle 10gR2 RAC Installation in RedHat 5 Linux Using VMware.
Important points to install 10gR2 oracle RAC in linux5.
1.LINUX 5(Redhat 5) doesn't have /etc/sysconfig/rawdevices file. so we have to configure it.
2. Edit the /etc/redhat-release version to redhat-4 and and to invoke the runInstaller use the command
$runInstaller -ignoreSysPrereqs. //this will bypass the os check //
3. Next during clusterware installation at the end of root.sh in node 2 end with error message.So we have adjust the parameters in vipca and srvctl files.
4. vipca will fail to run. so we have to adjust some parameters and configure it manually.
refer the link, it will be useful to you to complete your installation.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html

Local node not included in the list of host names for grid installation

I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PM

Hi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian

Node Manager Not Reachable

Hi Everyone,
I'm very new to WebLogic, so I apologize if this is a dumb question.
I'm trying to install WebLogic as server for OBIEE. My environment is pretty simple. I have two Oracle Red Hat Linux 32-bit physical machines, let's call them WLS_SERVER and OBIEE_SERVER. I installed OBIEE on the OBIEE_SERVER and tested it using the out of the box OC4J container and that worked fine.
Then I installed WebLogic 11g on the WLS_SERVER machine and I ran the config.sh script. I used the configuration GUI to register the two physical machines and an additional server object called BIServer. Out of the box, web logic comes with AdminServer server object. I heard it's a bad practice to deploy applications to the AdminServer, hence why I created the BIServer object. I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."
How do I setup a Node Manager on the OBIEE_SERVER? Do I also need to physical put the WebLogic install file on the OBIEE_SERVER box and also run the installer there? Or there a copy paste thing I do? What am I missing here?
I appreciate the help!
-Joe

I'm trying to install WebLogic as server for OBIEEI have not heard about OBIEE, but if your aim is to use weblogic as a server for hosting this then you definitely need to install weblogic on the physical box where OBIEE will be hosted.
I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."Again not sure what is BIServer but I think you are missing a number of steps here. If you are trying to run BIServer
on weblogic you definitely need to install WLS on this physical machine [OBIEE_SERVER]. You will then need to configure a node manager on OBIEE_SERVER machine to enable it to start remotely from the admin machine.
Link for Node Manager. Since you are in Linux you can try setting up script based node manager.
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/server_start/nodemgr.html#wp1099239

For server the Node Manager associated with machine is not reachable

Hello all,
I am getting this error, when i start my Managed Server which is in shutdown state
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The configuration details are
i am using weblogic 9.2 MP3 version in windows 2k3 server.
It has a machine vm-bea-dev, a cluster cluster-saa-dev, to which both the managed servers saa-dev-1 and saa-dev-2 are assigned. There are 3 applications deployed onto managed Server 1 and 1 for managed Server 2.
Managed Server 1 is in shutdown state, and when i start the server, it gives the error specified below
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The same for Managed Server 2 too, and this server is in Admin State, i dont know how it went into that state.
Can somebody please help me reslove it.
Thanks in advance

Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers

UCCX error-remote UCCX node is not reachable

Hi,
I am working in UCCX 9.0,trying to upload new script developed thorugh UCCX script editor ,whenever I click upload script through "script management" tab,giving error as "remote UCCX node is not reachable,it is not recommended to create,modify or delete the files in this state,as it will be inconsistent between nodes",let me know any idea about this error.
Thanks,
Baskar.

Hi,
RTMT is configured and found the following error.
2013-11-11 04:11:39 :INFO: Received request to start the service Cisco Unified CCX Engine
2013-11-11 04:11:39 :INFO: Checking if PID File exists.
2013-11-11 04:11:39 :INFO: process Cisco Unified CCX Engine is not running
2013-11-11 04:11:39 :INFO: Starting process Cisco Unified CCX Engine, Exe=/opt/cisco/uccx/bin/UCCX_Engine, Conf=/opt/cisco/uccx/conf/UCCX_EngineCfg.xml
2013-11-11 04:11:39 :INFO: Cisco Unified CCX Engine initialization complete.... PID 18469 updated in pid file /opt/cisco/uccx/conf/UCCX_Engine.pid
2014-06-05 05:45:46 :INFO: Received request to start the service Cisco Unified CCX Engine
2014-06-05 05:45:46 :INFO: Checking if PID File exists.
2014-06-05 05:45:47 :INFO: PID File exists, pid=18469
2014-06-05 05:45:47 :INFO: process Cisco Unified CCX Engine with PID 18469 might have crashed, PID file still exists
2014-06-05 05:45:47 :INFO: Stale PID entry 18469, removing PID file
2014-06-05 05:45:49 :INFO: Starting process Cisco Unified CCX Engine, Exe=/opt/cisco/uccx/bin/UCCX_Engine, Conf=/opt/cisco/uccx/conf/UCCX_EngineCfg.xml
2014-06-05 05:45:49 :INFO: Cisco Unified CCX Engine initialization complete.... PID 4201 updated in pid file /opt/cisco/uccx/conf/UCCX_Engine.pid
2014-06-05 07:04:03 :INFO: Received request to stop the service Cisco Unified CCX Engine
2014-06-05 07:04:03 :INFO: PID File exists, pid=4201
2014-06-05 07:04:03 :INFO: Stopping the Process Cisco Unified CCX Engine, pid=4201
2014-06-05 07:04:03 :INFO: Stopped the process Cisco Unified CCX Engine
2014-06-05 07:28:29 :INFO: Received request to start the service Cisco Unified CCX Engine
2014-06-05 07:28:29 :INFO: Checking if PID File exists.
2014-06-05 07:28:29 :INFO: process Cisco Unified CCX Engine is not running

Ise node is not reachable after upgrading 1.2

Hi, I was using beta version of ISE with 1.2.834 code. and now the official release came out so I upgraded it.
after that, the ISE is not communicating with AD, and when I go to download logs, It says node is not reachable even though it is STANDALONE mode.
does anyone know how to work around this ?
should I just delete everything and go from scratch ?

The ISE is not communicating to the AD, So, you have to rejoin the domain. For this purpose please follow the following actions:
Go to Administration > Identity Management > External Identity Stores and select Active Directory from the left-hand pane.
Click Join at the bottom of the configuration page:
Also please check the LDAP port

11g node manager reachable but server does not start from admin console

I have a issue with node manager is reachable from admin console and from command prompt it is not connected and could not able to start the managed server.
If i change /config/nodemanager/nm_password.properties plain text and restart it is not reachable in admin console abut can connect from command prompt. I could not able to start the even with this scenario.
i see below error when try to check machine monitor tab.
<Error> <NodeManager> <BEA-300033> <Could not execute command "getVersion" on the node manager. Reason: "Access to domain 'dom_11gint' for user 'Ckr10ycOJN' denied".>
Ckr10ycOJN username in config.xml
node manager and managed servers are not root user process.
Please help me if have any suggestions.

Pls. make sure the following points in your environment.
1) Check '*nodemanager.domains*' file in <<WL_HOME>>\commo\nodemanager directory
     a) This file should have the entry for your domain 'dom_11gint'.
     b) Ensure the path referred in the nodemanager.domains file is correct one.
2) Ensure the following remote server startup parameters are passed properly.
     a) In the Admin Console, Navigate Servers --> <<SERVER_NAME>> -->Configuration --> Server Start
     b) Pass the required Class Path, Arguments, User Name, Password(User name and Password to boot the managed servers)

Installing 10g R2 on Windows 2000, installer not starting

Hi all,
I am installing Oracle 10g R2 on Windows 2000 Compact ProLiant ML570 with 4 CPUs (x86 Family 6 Intel 701 Mhz), 1 Gb of memory, eight disks and one disk controller.). It has 9i already installed. I downloaded the 10g software and extracted the file into a local folder, however when i click setup.exe, the cmd window fires up saying it is starting up the installer. The command prompt then disappears and no installer is started! I have also try clicking the autorun file and the oui.exe which is within the install directory with no avail. Is this a bug? but then 9i is already installed and the 9i gui fires up fine?
Any help will be greatly appreaciated,
Thanks in advance,
Nikesh

Could you check the java version your are having
Best regards
Deepu

Oracle RAC 10g R2 in Windows Installation error

Hi!
Can anyone help me with this one?
I have trying to installa RAC 10g R2 in Windows Server 2008 R2. I am encountering the error below:
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
nodes. The specified service does not exist as an installed service
Thanks..

Pl indicate which version of 10gR2 - only 10.2.0.5 is supported on Win 2008 R2
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
Pl also post in the RAC forums - RAC, ASM & Clusterware Installation
Srini

Clusterware Installation - Clock Skew and Packages Issue?

Hi,
Can someone share how to resolve installation issues in Clusterware10.2,
rac1 - VM Centos4.7, 512 RAM
rac2 - VM Centos4.7, 512 RAM
Both VMs are located on Windows XP physical box.
1. error while copying directory /u01/crs/oracle/product/10.2.0/crs with exclude file list 'null' to node 'rac2'. [PRKC-1002: All submitted commands did not execute successfully.
- when I check the log, time stamp in rac2 is 'x' in the future, where x = variable, 2 sec, 100 sec etc.
What is the allowable clock skew between 2 nodes?
2. My cluvfy output command failed due to not exact packages,
Ex. compat-gcc-7.3-2.96.128
actual package, using command ( rpm -qa compat-gcc*)
- compat-gcc-32-c++-3.2.3-47.3
compat-gcc-32-3.2.3-47.3
Can we proceed to installation with not exact package version?
3. During installation, all configuration assistant failed. Any idea why this is happening? My cluvfy output is shown below.
Thanks..
[oracle@rac1 cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 passed
Result: User equivalence check passed for user "oracle".
Checking administrative privileges...
Check: Existence of user "oracle"
Node Name User Exists Comment
rac2 yes passed
rac1 yes passed
Result: User existence check passed for "oracle".
Check: Existence of group "oinstall"
Node Name Status Group ID
rac2 exists 500
rac1 exists 500
Result: Group existence check passed for "oinstall".
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
rac2 yes yes yes yes passed
rac1 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Interface information for node "rac2"
Interface Name IP Address Subnet
eth0 10.23.15.72 10.23.0.0
eth1 10.23.15.74 10.23.0.0
Interface information for node "rac1"
Interface Name IP Address Subnet
eth0 10.23.15.71 10.23.0.0
eth1 10.23.15.73 10.23.0.0
Check: Node connectivity of subnet "10.23.0.0"
Source Destination Connected?
rac2:eth0 rac2:eth1 yes
rac2:eth0 rac1:eth0 yes
rac2:eth0 rac1:eth1 yes
rac2:eth1 rac1:eth0 yes
rac2:eth1 rac1:eth1 yes
rac1:eth0 rac1:eth1 yes
Result: Node connectivity check passed for subnet "10.23.0.0" with node(s) rac2,rac1.
Suitable interfaces for the private interconnect on subnet "10.23.0.0":
rac2 eth0:10.23.15.72
rac1 eth0:10.23.15.71
Suitable interfaces for the private interconnect on subnet "10.23.0.0":
rac2 eth1:10.23.15.74
rac1 eth1:10.23.15.73
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
rac2 502.28MB (514332KB) 512MB (524288KB) failed
rac1 502.28MB (514332KB) 512MB (524288KB) failed
Result: Total memory check failed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
rac2 5.03GB (5271204KB) 400MB (409600KB) passed
rac1 4.57GB (4792448KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
rac2 1023.99MB (1048568KB) 1GB (1048576KB) failed
rac1 1023.99MB (1048568KB) 1GB (1048576KB) failed
Result: Swap space check failed.
Check: System architecture
Node Name Available Required Comment
rac2 i686 i686 passed
rac1 i686 i686 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
rac2 2.6.9-78.ELsmp 2.4.21-15EL passed
rac1 2.6.9-78.ELsmp 2.4.21-15EL passed
Result: Kernel version check passed.
Check: Package existence for "make-3.79"
Node Name Status Comment
rac2 make-3.80-7.EL4 passed
rac1 make-3.80-7.EL4 passed
Result: Package existence check passed for "make-3.79".
Check: Package existence for "binutils-2.14"
Node Name Status Comment
rac2 binutils-2.15.92.0.2-25 passed
rac1 binutils-2.15.92.0.2-25 passed
Result: Package existence check passed for "binutils-2.14".
Check: Package existence for "gcc-3.2"
Node Name Status Comment
rac2 gcc-3.4.6-10 passed
rac1 gcc-3.4.6-10 passed
Result: Package existence check passed for "gcc-3.2".
Check: Package existence for "glibc-2.3.2-95.27"
Node Name Status Comment
rac2 glibc-2.3.4-2.41.el4_7.1 passed
rac1 glibc-2.3.4-2.41.el4_7.1 passed
Result: Package existence check passed for "glibc-2.3.2-95.27".
Check: Package existence for "compat-db-4.0.14-5"
Node Name Status Comment
rac2 compat-db-4.1.25-9 passed
rac1 compat-db-4.1.25-9 passed
Result: Package existence check passed for "compat-db-4.0.14-5".
Check: Package existence for "compat-gcc-7.3-2.96.128"
Node Name Status Comment
rac2 missing failed
rac1 missing failed
Result: Package existence check failed for "compat-gcc-7.3-2.96.128".
Check: Package existence for "compat-gcc-c++-7.3-2.96.128"
Node Name Status Comment
rac2 missing failed
rac1 missing failed
Result: Package existence check failed for "compat-gcc-c++-7.3-2.96.128".
Check: Package existence for "compat-libstdc++-7.3-2.96.128"
Node Name Status Comment
rac2 missing failed
rac1 missing failed
Result: Package existence check failed for "compat-libstdc++-7.3-2.96.128".
Check: Package existence for "compat-libstdc++-devel-7.3-2.96.128"
Node Name Status Comment
rac2 missing failed
rac1 missing failed
Result: Package existence check failed for "compat-libstdc++-devel-7.3-2.96.128".
Check: Package existence for "openmotif-2.2.3"
Node Name Status Comment
rac2 openmotif-2.2.3-10.2.el4 passed
rac1 openmotif-2.2.3-10.2.el4 passed
Result: Package existence check passed for "openmotif-2.2.3".
Check: Package existence for "setarch-1.3-1"
Node Name Status Comment
rac2 setarch-1.6-1 passed
rac1 setarch-1.6-1 passed
Result: Package existence check passed for "setarch-1.3-1".
Check: Group existence for "dba"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: User existence check passed for "nobody".
System requirement failed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.

Hi
answer q1
This error because your second node time was greater than node one, this is causing OUI failed in running tar command on second node.
you need to set node 2 time slighter less or equal to node 1 time
answer q2
yes we can proceed installation with package greater or equal than required
answer q3
it seems your VMs memory allocation were to small (512MB). I don't think that would be enough to installing rac.
and try to install required packages
Cheers
FZheng

Clusterware Installation (Nodes not reachable....) 10G R2 on Windows

Similar Messages

Maybe you are looking for