Cluvfy pre dbconfiguration check fails

hello friends
I am installing RAC 10g database using a 2 node cluster
I have successfully installed the Oracle Clusterware, Oracle Database software, Oracle Companion CD software, and also configured listeners on both nodes ( viz.linux1, linux2) on both the nodes.
when I run the cluvfy utility as oracle user who is member of the oinstall and dba groups:
./runcluvfy.sh stage -pre dbcfg -n linux1,linux2 -d ${ORACLE_HOME} -verbose
it returns
oracle home {u01/app/oracle/product/10.2.0/db_1} does not exist
Administrative Privileges check failed
all the cluvfy checks for all previous stages ran ok
what is the problem here
please respond. also tell me of any more infornmation that I should provide
Regards
Kuber

oracle home {u01/app/oracle/product/10.2.0/db_1} does not existCan you confirm your ORACLE_HOME path?
Thanks

Similar Messages

All 11g pre-requisites check failed on solaris 10

During 11g R2 (64 bit) installation on Solaris 10 64 bit, all pre-requisites checks were failed.
Like the first one given below:
=======================
Physical Memory - This is a prerequisite condition to test whether the system has at least 1GB (1048576.0KB) of total physical memory.
Expected Value : n/a
Actual Value : n/a
List of errors: -
PRVF-7531 : Physical memory check cannot be performed on node "sol11oracle-vm" -
Cause: Could not perform check of physical memory on the node indicated. -
Action: Ensure ability to access the node specified and view memory information.
=======================
It seems that oracle installer not able to resolve the name "sol11oracle-vm".
Please suggest.

Hi, know that its an old thread but anyway.
Check metalink for *11GR2 INSTALL ON SOLARIS FAILS MANY PREREQUISITE CHECKS [ID 989727.1]*.
Oracle 11gR2 software is NOT certified for:
a.) Solaris 10 “less than update 6” with the right patches.
b.) Solaris 10 “less than update 6” with a Solaris patch bundle.
c.) Solaris 10 “less than update 6” with a Solaris release update
It is only certified for a base install image of Solaris 10 update 6 or greater.

RAC - Cluvfy - TCP connectivity check failed for subnet

Hi ...this is Oracle RAC 10.2.0.4.0 .. has anyone witnessed this check failure or is able to comment on how I should debug the same
./runcluvfy.sh stage -post hwos -n all -verbose
Check: TCP connectivity of subnet "172.30.182.0"
Source Destination Connected?
sekiazu0230:172.30.182.67 sekiazu0231:172.30.182.68 failed
sekiazu0230:172.30.182.67 sekiazu0231:172.30.182.68 failed
Result: TCP connectivity check failed for subnet "172.30.182.0"
Interface information for node "sekiazu0230"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
en0 172.30.182.67 172.30.182.0 172.30.182.67 172.30.182.1 1E:40:3D:1C:96:02 1500
en0 172.30.182.67 172.30.182.0 172.30.182.67 172.30.182.1 1E:40:3D:1C:96:02 1500 ===> Duplicated ?
en1 172.30.190.48 172.30.190.0 172.30.190.48 172.30.182.1 1E:40:3D:1C:96:03 1500
en2 10.252.34.9 10.252.34.0 10.252.34.9 172.30.182.1 1E:40:3D:1C:96:04 65390
Thank you for all feedback
Steve

Hello Buddy,
Please note that inode2:127.0.0.1 is using loopback IP, please check your network configuration and retry the cluvfy operation.
Cheers,
Rodrigo Mufalani
www.mufalani.com.br/blog

Oracle apps 12i pre install checks fails in cl; command not found

Hi guyz,
Im trying to install 12i on external hard drive (windows xp), I followed the steps from http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=60&start=0
The installation fails in
command: cmd.exe /c D:\stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd d:\Tools\MKS\mksnt\bin d:\Tools\MSVC\V98
D:\stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/cygdrive/d/Tools/MKS/mksnt/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
There are no spaces in MKS tool kit and Visualstudio2005 install dir but still the installation fails.
I tried many combinations installing MKS and VS on c:, installing MKS and VS on d:, installing VC++ express edition but nothing worked. Also i have set the enviromental variable PATH each time i made a change. Still i get the same issue.
Im doing this for a week now, had no luck.
I had a successful installation of 11.5.10 from e delivery but it didn't had the financials modules needed. There is an update for 11.5.10 on edelivery but i was not sure if they had the financials modules in it, so i decided to go for 12i
Can anybody help me with 12i installation or provide me steps how to apply the updates on 11.5.10 if updates have financials in it.
I appreciate any help.

Oracle E-Business Suite R12 Installation on Windows 2003
Re: Oracle E-Business Suite R12 Installation on Windows 2003
If you have a VC98, you are using Visual Studio 6. You need to be using Visual Studio 8, and set the Visual Studio directory in Rapidwiz to d:\Tools\MSVS\VC.
The Vision installation of Oracle Applications has had Oracle Financials implemented for the fictitious company Vision Corporation from the beginning, 10.7 I believe, but definitely every 11i release has financials plus every other product licensed. Not all the newest products are fully implemented, but they are licensed.

CLUVFY failing with 'User Equivalence check failed for...'

New 2 node RAC configuration. Oracle 10gR2, Linux RHEL 5 x64. I'm at the post hardware config, pre install clusterware stage.
Running the cluster verification utility command:
cluvfy comp sys -n node-01,node-02 -p crs -verboseReturns the following error:
Verifying system requirement
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Verification of system requirement was unsuccessful on all the nodes.I've verified the following:
1) RSA keys correctly configured on both nodes and I can ssh between without a password
2) ping ip and private work correctly to and from both nodes.
3) user, group ids are identical on both systems.
I also ran cluvfy stage -post hwos -n node-01,node-02 -verbose and received the following output. This output is from node-01. node-02's is identical, except with equivalence to itself failing.
Checking node reachability...
Check: Node reachability from node "node-01"
Destination Node                      Reachable?
node-02                       yes
node-01                       yes
Result: Node reachability check passed from node "node-01".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node-02                       passed
node-01                       failed
Result: User equivalence check failed for user "oracle".
WARNING:
User equivalence is not set for nodes:
        node-01
Verification will proceed with nodes:
        node-02
Checking node connectivity...I get the same behavior on both nodes. Not quite sure what else to check. Any thoughts or suggestions? Thanks.

No, no banners. And I followed note 300548.1 to the letter. Several times :-)
However, I believe my issue has to do with a CVUHOME/cv/admin/cvu_config.
According to the documentation:
CV_XCHK_FOR_SSH_ENABLED—If set to TRUE, it enables the X-Windows check for verifying user equivalence with ssh. By default, this entry is commented out and X-Windows check is disabledIt was not, unfortunately, disabled by default - once I set it to false, everything succeeded. I still need to figure out why XCHK itself is failing, but I think I can troll through the log to figure that out.

User equivalence check failed for user "oracle" while running cluvfy

Hi All,
I am getting User equivalence error as follows while executing cluvfy. I want to install CRS on this server.
oracle@node200$ ./runcluvfy.sh stage -pre crsinst -n node200,node201,node202
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "node200".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
node202,node201,node200
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
I have sucessfully configured ssh and able to do ssh from all the nodes without prompting for the password. Also oracle uid and gid on all the servers are same.
I also checked in .kshrc file and there is no tty entry in that file. and I have also setup /etc/hosts.equiv file on all the node.
I still get the user equivalance error. Can anybody help me in this ?
Regards,
Raj.

Hi,
thanks.
i need some more help because first time i am working on RAC,
i am also having User equivalence check failed for user "oracle"
i got two machines, one is IBM machine and one is DELL machine installed with solais 10 (AIX installation). both machines are not connected by private network now. and no shared external HDD available now. it will take one week time to set up the HW. the user equivalence check depends the above two factors?
now public network is available and node reachability test "passed"
could you please tell me what may be the reason for the user equivalence check in my case. details are given below
i have oracle user in both machine. user creation done through SMC. home directory is /export/home/oracle
the following are the details.
1) $ ssh pc000905 id -a oracle
Enter passphrase for key '/home/oracle/.ssh/id_rsa':
uid=100(oracle) gid=300(oinstall) groups=301(dba)
$ ssh pc026376 id -a oracle
Enter passphrase for key '/home/oracle/.ssh/id_rsa':
uid=100(oracle) gid=300(oinstall) groups=301(dba)
2) user nobody exists.
3) all files n .ssh directory have same permissions.
4) ssh and scp is working with out password(rsa and dsa keys generated).
5) oracle user is using bourne shell
6)soft link of /usr/bin/ssh and /usr/bin/scp are created to /export/home/oracle/bin
7)ForwardX11 is "yes" in sshd_config
8) created a config file in .ssh directory and ForwardX11 is "no" in that file
8) umask =022 in both nodes.
error displaying is
$/export/gome/cluvfy/runcluvfy.sh stage -pre crsinst -n pc026376,pc000905
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "PC026376".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
pc026376,pc000905
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
$

Cluvfy : Time zone consistency check failed

Hello All,
Env: 112.0.3 on Linux 5.8
Single node RAC
I 'am trying to add another node to my cluster.
When i run the cluvfy it shows
cluvfy stage -pre nodeadd -n a0002 -fixup -verbose
o/p trimmed
Oracle Cluster Voting Disk configuration check passed
Check: Time zone consistency
Result: Time zone consistency check failed
The `date` on both the servers shows UTC as the timezone and they sync
a0001:oracle(ps1) ~ % ssh a0002 date;date
Thu Oct 3 06:28:13 UTC 2013
Thu Oct 3 06:28:13 UTC 2013
cat /u01/app/11.2.0/grid/crs/install/s_crsconfig_a0001_env.txt
TZ=UTC
NLS_LANG=AMERICAN_AMERICA.AL32UTF8
TNS_ADMIN=
ORACLE_BASE=
Where does the script check for this?
TIA,
John

Thx Anar for stepping by..
rm -rf /tmp/cvutrace
mkdir /tmp/cvutrace
export CV_TRACELOC=/tmp/cvutrace
export SRVM_TRACE=true
export SRVM_TRACE_LEVEL=1
<STAGE_AREA>/runcluvfy.sh stage -pre crsinst -n <node1>,<node2> -verbose
i enabled tracing on cluvfy and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good.
and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good.

Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

Hi Guys,
For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
But when I try to check Pre-requisite from command line, everything seems to be ok.
This is what the output...
$ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "sph1erp"
Destination Node Reachable?
sph1erp yes
sph2erp yes
Result: Node reachability check passed from node "sph1erp"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
sph2erp passed
sph1erp passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
sph2erp passed
sph1erp passed
Verification of the hosts config file successful
Interface information for node "sph2erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
Interface information for node "sph1erp"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
Check: Node connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.16.48"
Source Destination Connected?
sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
Result: TCP connectivity check passed for subnet "10.10.16.48"
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
Check: TCP connectivity of subnet "10.10.0.0"
Source Destination Connected?
sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
Result: TCP connectivity check passed for subnet "10.10.0.0"
Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
sph2erp lan900:10.10.1.174
sph1erp lan900:10.10.1.173
Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
sph2erp lan2:10.10.16.51
sph1erp lan2:10.10.16.50
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
Result: Swap space check passed
Check: Free disk space for "sph2erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph2erp /var 13.8074GB 1GB passed
Result: Free disk space check passed for "sph2erp:/var/tmp/"
Check: Free disk space for "sph1erp:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ sph1erp /var 13.8158GB 1GB passed
Result: Free disk space check passed for "sph1erp:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
sph2erp exists(199) passed
sph1erp exists(199) passed
Checking for multiple users with UID value 199
Result: Check for multiple users with UID value 199 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
sph2erp exists passed
sph1erp exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
sph2erp yes yes yes yes passed
sph1erp yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
sph2erp yes yes yes passed
sph1erp yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
sph2erp 3 3 passed
sph1erp 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp hard 63488 63488 passed
sph1erp hard 63488 63488 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
sph2erp soft 1024 1024 passed
sph1erp soft 63488 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp hard 3687 3686 passed
sph1erp hard 3687 3686 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
sph2erp soft 3687 2047 passed
sph1erp soft 3687 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
sph2erp ia64 ia64 passed
sph1erp ia64 ia64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
sph2erp HP-UX B.11.31 B.11.31 passed
sph1erp HP-UX B.11.31 B.11.31 passed
Result: Kernel version check passed
Check: Kernel parameter for "ksi_alloc_max"
Node Name Configured Required Comment
sph2erp 32768 32768 passed
sph1erp 32768 32768 passed
Result: Kernel parameter check passed for "ksi_alloc_max"
Check: Kernel parameter for "executable_stack"
Node Name Configured Required Comment
sph2erp 0 0 passed
sph1erp 0 0 passed
Result: Kernel parameter check passed for "executable_stack"
Check: Kernel parameter for "max_thread_proc"
Node Name Configured Required Comment
sph2erp 1024 1024 passed
sph1erp 1024 1024 passed
Result: Kernel parameter check passed for "max_thread_proc"
Check: Kernel parameter for "maxdsiz"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxdsiz"
Check: Kernel parameter for "maxdsiz_64bit"
Node Name Configured Required Comment
sph2erp 2147483648 2147483648 passed
sph1erp 2147483648 2147483648 passed
Result: Kernel parameter check passed for "maxdsiz_64bit"
Check: Kernel parameter for "maxssiz"
Node Name Configured Required Comment
sph2erp 134217728 134217728 passed
sph1erp 134217728 134217728 passed
Result: Kernel parameter check passed for "maxssiz"
Check: Kernel parameter for "maxssiz_64bit"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "maxssiz_64bit"
Check: Kernel parameter for "maxuprc"
Node Name Configured Required Comment
sph2erp 3686 3686 passed
sph1erp 3686 3686 passed
Result: Kernel parameter check passed for "maxuprc"
Check: Kernel parameter for "msgmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgmni"
Check: Kernel parameter for "msgtql"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "msgtql"
Check: Kernel parameter for "ncsize"
Node Name Configured Required Comment
sph2erp 35840 35840 passed
sph1erp 35840 35840 passed
Result: Kernel parameter check passed for "ncsize"
Check: Kernel parameter for "shmmax"
Node Name Configured Required Comment
sph2erp 1073741824 1073741824 passed
sph1erp 1073741824 1073741824 passed
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Configured Required Comment
sph2erp 4096 4096 passed
sph1erp 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmseg"
Node Name Configured Required Comment
sph2erp 512 512 passed
sph1erp 512 512 passed
Result: Kernel parameter check passed for "shmseg"
Check: Kernel parameter for "tcp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "tcp_smallest_anon_port"
Check: Kernel parameter for "tcp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "tcp_largest_anon_port"
Check: Kernel parameter for "udp_smallest_anon_port"
Node Name Configured Required Comment
sph2erp 9000 9000 passed
sph1erp 9000 9000 passed
Result: Kernel parameter check passed for "udp_smallest_anon_port"
Check: Kernel parameter for "udp_largest_anon_port"
Node Name Configured Required Comment
sph2erp 65500 65500 passed
sph1erp 65500 65500 passed
Result: Kernel parameter check passed for "udp_largest_anon_port"
Check: Package existence for "OS-Core-B.11.31( ia64)"
Node Name Available Required Comment
sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
Check: Operating system patch for "Patch PHKL_38938"
Node Name Applied Required Comment
sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
Result: Operating system patch check passed for "Patch PHKL_38938"
Check: Operating system patch for "Patch PHKL_39351"
Node Name Applied Required Comment
sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
Result: Operating system patch check passed for "Patch PHKL_39351"
Check: Operating system patch for "Patch PHSS_36354"
Node Name Applied Required Comment
sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
Result: Operating system patch check passed for "Patch PHSS_36354"
Check: Operating system patch for "Patch PHSS_37042"
Node Name Applied Required Comment
sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
Result: Operating system patch check passed for "Patch PHSS_37042"
Check: Operating system patch for "Patch PHSS_37959"
Node Name Applied Required Comment
sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
Result: Operating system patch check passed for "Patch PHSS_37959"
Check: Operating system patch for "Patch PHSS_39094"
Node Name Applied Required Comment
sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
Result: Operating system patch check passed for "Patch PHSS_39094"
Check: Operating system patch for "Patch PHSS_39100"
Node Name Applied Required Comment
sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
Result: Operating system patch check passed for "Patch PHSS_39100"
Check: Operating system patch for "Patch PHSS_39102"
Node Name Applied Required Comment
sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
Result: Operating system patch check passed for "Patch PHSS_39102"
Check: Operating system patch for "Patch PHSS_38141"
Node Name Applied Required Comment
sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
Result: Operating system patch check passed for "Patch PHSS_38141"
Check: Operating system patch for "Patch PHCO_40381"
Node Name Applied Required Comment
sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
Result: Operating system patch check passed for "Patch PHCO_40381"
Check: Operating system patch for "Patch PHKL_38038"
Node Name Applied Required Comment
sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
Result: Operating system patch check passed for "Patch PHKL_38038"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
No NTP Daemons or Services were found to be running
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
sph2erp does not exist passed
sph1erp does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
sph2erp 022 0022 passed
sph1erp 022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Node Name Status
sph2erp passed
sph1erp passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Checking settings of device file "/dev/async"
Node Name Available Comment
sph2erp yes failed (incorrect setting for minor number.)
sph1erp yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Starting check for The SSH LoginGraceTime setting ...
WARNING:
PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
Check for The SSH LoginGraceTime setting passed
Fixup information has been generated for following node(s):
sph2erp,sph1erp
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
What could be the issue ????
Any help would be appreciated...
Regards,
Manish

Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
sph1erp:/oracle/11.2.0/grid #sh root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
ASM created and started successfully.
Disk Group OCRVOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
Successfully replaced voting disk group with +OCRVOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
Located 5 voting disk(s).
Start of resource "ora.cluster_interconnect.haip" failed
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Clusterware stack
Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
/oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
sph1erp:/oracle/11.2.0/grid #
Last few lines from CRS Log for node 1, where error came
[ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
2011-02-25 23:04:16.491
[oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
2011-02-25 23:04:20.521
[ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
*/oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
=====================================================================================================
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
Start action for HAIP aborted
2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
owing error:
Start action for HAIP aborted
] for start for resource: ora.cluster_interconnect.haip 1 1
2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
[   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
=====================================================================================================
2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
erconnect'
What could be the issue ????
Experts Please help me. Doing setup for the PRoduction Env...
Do response ASAP...... Thanks
Regards,
Manish

Agent deployment from EM 12.1.0.2 to Linux agent failing pre-req checks

Trying to deploy the agent software from EM to a Linux host running Oracle Enterprise Linux version 5.8 I am failing one of the pre-requisite checks indicating that the root / is not owned by the root. From the install log
INFO: --------------------------------------------------------------------------------
INFO: Checking AgentBaseDirCheck
This is a prerequisite condition to test whether the agent base directory is owned by the install user, all the parent directories are owned by either the install user or root user and the root directory (that is '/') is owned by root user.
INFO: The value of AGENT_BASE_DIR is:/opt/EM_Agent.
INFO: The value of ORACLE_HOME is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0
INFO: The command that is getting executed as part of this prereq is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/perl/bin/perl /opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/sysman/install/CheckDirPermission.pl /opt/EM_Agent
INFO: Checking for proper ownership on the agent base directory.
INFO: Checks whether the agent base directory is owned by the agent user oracle and that its parent directory is owned by either the agent user or root.
INFO: ....
INFO: Login name is : oracle & file owner is : oracle
INFO: ....
INFO: ERROR : root dir is not owned by root user.
INFO: Check complete. The overall result of this check is: Failed <<<<
INFO: --------------------------------------------------------------------------------
Not sure how the / can not be owned by root.
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
220G 63G 146G 30% /
/dev/sda1 99M 23M 72M 24% /boot
tmpfs 2.0G 620M 1.4G 32% /dev/shm
[root@tomintoul mapper]# ls -al
total 0
drwxr-xr-x 2 root root 100 Dec 4 11:42 .
drwxr-xr-x 13 root root 7180 Dec 10 06:59 ..
crw------- 1 root root 10, 62 Dec 4 11:42 control
brw-rw---- 1 root disk 253, 0 Dec 4 11:42 VolGroup00-LogVol00
brw-rw---- 1 root disk 253, 1 Dec 4 11:42 VolGroup00-LogVol01
Any help would be appreciated.

Hi,
Please follow the document provided below which explains the issue.
EM 12c: Agent Installation Fails With Error 'root dir is not owned by root user' (Doc ID 1380296.1)
Regards,
Venkat

Failed pre install check for 11i

Hi, newbie to 11i and am trying to install 11i on my 250GB external HD but failed pre-install checks in 3 areas
1) system utilities check (!)
2) operating system check (!)
3) file space check (x) talked about mount points in error message
Quite frustrating as i had installed the mks and mvs files on my c:\ as instructed. also i was`advised to certain tests thru the cmd prompt by entering these files; link, gnumake and cc. i got responses for link ad gnumake but no respnses for cc.
guys out there, any solutions please
Message was edited by:
user480131

Saw the same post at other place too..
While running rapid install did you give the mount points for Data_top ora_top and Appl_top to correct values
For system utils check for the PATH env variable is it pointing to right place.
For OS check .. I am not sure. (you should have checked the certiifcation matrix for this .. or may be some required patches are missing for this OS)
Hi, newbie to 11i and am trying to install 11i on my
250GB external HD but failed pre-install checks in 3
areas
1) system utilities check (!)
2) operating system check (!)
3) file space check (x) talked about mount points in
error message
Quite frustrating as i had installed the mks and mvs
files on my c:\ as instructed. also i was`advised to
certain tests thru the cmd prompt by entering these
files; link, gnumake and cc. i got responses for link
ad gnumake but no respnses for cc.
guys out there, any solutions please
Message was edited by:
user480131Saw same post at another place too ..

Failing PATH pre-requisite check installing 11g client

Greetings -
I'm trying to install the 32bit oracle 11g database client on Win 7 Professional x64. I'm stuck with this error when the installer gets to the "Perform Prerequisite Checks" step:
Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Details:
- PRVF-3919 : Failed to retrieve value of environment variable "PATH"
- Cause: Environment variable value could not be determined.
- Action: Check user equivalence and whether the user has administrative privileges on the node.
Google tells me this might be related to an excessive PATH environment variable length, so I made multiple repetitions of "clean some crap out and try to install again" with no effect. Currently it is set to:
C:\>path
PATH=C:\Windows\system32;C:\Windows;
And the installer still fails.
I've tried explicitly running the installer via "Run as Administrator" and as a regular user (who is in the Administrators group). No change either way.
Someone on my team suggested making sure the installation target path has no spaces in it. I'm keeping the default path suggested by the installer, which is
D:\app\ladams\product\11.2.0\client_1
where ladams is my Windows user name. I did some experimentation here, changing the install path to things like "D:\oracle" and that hasn't resolved the issue.
Interestingly, if I open the installer log, I can find this line in it near the top:
INFO: PATH has :==>C:\Users\ladams\AppData\Local\Temp\OraInstall2013-01-28_02-19-03PM\jdk\jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;;;.
So it can apparently read the path at some point before the pre-requisite check, although it seems to be doubling up the contents for some reason...
Later on in the log file, I see this:
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
Is there some way to work around this issue, or just skip the prerequisites check entirely? I found something on a blog via google about being able to pass a "-ignoreSysPrereqs" switch to the installer to bypass the check. When I tried that, the installer still performed it's checks, and failed with the same error, so apparently that was bad info...
Any help would be appreciated.

Thanks for the reply.
I did indeed take a look at the client installation instructions here: http://docs.oracle.com/cd/E11882_01/install.112/e24282/toc.htm#BABGCIFF
However, it appears to be out of date, or at least not applicable to my problem. Step 10 refers to an Ignore All button:
"Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system is able to install Oracle Database successfully."
I don't have an ignore all button. At least if there is, it's cleverly disguised. The only option I have after the check fails is "Cancel."
Is there another section of the fine manual I should take a look at?
Edited by: 984635 on Jan 28, 2013 6:09 PM
Edited by: 984635 on Jan 28, 2013 6:17 PM

System architecture check failed while adding a New Node in RAC

Hi Friends,
Environment:SUN Solris 10
Cluster Version:10.2.0.3
database Version:10.2.0.3.0
Due to H/W failure one of our RAC node(prod1) got formatted.
We have deleted the node(prod1) from RAC successfully.
But When i am again trying to add the node and checking prerequistes i am facing the below issue.
$ cd /software/oracle/product/crs/bin
$ ./cluvfy stage -pre crsinst -n prod1,prod2
Check: System architecture
Node Name     Available                 Required                  Comment
prod2        unknown                   64-bit                    failed
prod1        64-bit                    64-bit                    passed
Result: System architecture check failed.But issue is that prod2 is my active(running node), so how to resolve this issue?
please suggest..
Regards
Umesh

Resolved..
Thanks...

Result: PRVF-4007 : User equivalence check failed for user "oracle"

Hi
I get below error everytime I run ./cluvfy stage -pre crsinst -n node01,node02 -fixup -verbose > a.log
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node02 passed
node01 failed
Result: PRVF-4007 : User equivalence check failed for user "oracle"
WARNING:
User equivalence is not set for nodes:
node01
Verification will proceed with nodes:
node02
node01 is the local node, if I run from node02 It comes back saying the same thing about node2!
I have checked oracle uid and groups all set correctly and ssh working fine ...
I have ran the same command for grid user and getting the same error !!

i know what it was, i should have done ssh localnode date for once at least!!
I only did ssh remotenode date :)

11g Cluster: User equivalence check failed on Node1 but passed on Node2,

From Node1:
[oracle@redhat4_1 bin]$ ./cluvfy stage -pre crsinst -n redhat4_1,redhat4_2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "redhat4_1"
Destination Node Reachable?
redhat4_2 yes
redhat4_1 yes
Result: Node reachability check passed from node "redhat4_1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
redhat4_2 passed
redhat4_1 failed
Result: User equivalence check failed for user "oracle".
WARNING:
User equivalence is not set for nodes:
redhat4_1
Verification will proceed with nodes:
redhat4_2
From Node2:
[oracle@redhat4_2 bin]$ ./cluvfy stage -pre crsinst -n redhat4_1,redhat4_2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "redhat4_2"
Destination Node Reachable?
redhat4_2 yes
redhat4_1 yes
Result: Node reachability check passed from node "redhat4_2".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
redhat4_2 passed
redhat4_1 passed
Result: User equivalence check passed for user "oracle".
Why cluvfy failed on node1 but passed on node2? Thanks.

Last time I saw that, the password-less SSH was working only in one direction. Root cause was not quite following the instructions to copy the authorized_keys to all nodes.

User equivalence check failed for user "oracle".

Hi,
I am trying to install the Oracle Clusterware 10g as part of my RAC setup.
I have configured RHEL 4 in 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the below error:
[oracle@rac cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n rac,rac2
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "rac".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
rac
WARNING:
User equivalence is not set for nodes:
rac
Verification will proceed with nodes:
rac2
The problem is only with the first node(rac). The second node passes succesfully.
ssh works fine. Not sure what is wrong!
Thanks!

Did you do Configure SSH for User Equivalence ?
Or
Did you Establish User Equivalence ?
If yes.. please check...
$ ssh rac hostname
rac
$ ssh rac2 hostname
rac2
You should Establish User Equivalence before...
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add
If You don't configure ssh for user equivalence
http://www.oracle.com/technology/pub/articles/smiley_rac10g_install.html
Or
read SSH User equivalence is not set up on the remote nodes

Cluvfy pre dbconfiguration check fails

Similar Messages

Maybe you are looking for