CM 4.4.7 Online and End Devices 4.2.3c Offline status
Hallo all,
I am running WAE-512-K9 and the Central Manager was upgraded to 4.4.7 and the Some Application Accelerators are running 4.2.3c and they seem to be showing "offline status " but they are still optimizing save for the status being "offline"
What could be the Issue here ?
Hi Erasmus,
Are all accelerators running version 4.2.3c showing offline or just few? If all on same version are showing offline it could incompatibility issue between versions.
You can also go to the application accelerator CLI and execute the command:
show cms info
See what it shows. Check the connectivity between accelerator and CM. If it is fine and nothing has changed (like FW rules in between accelerator and CM) try doing the below and see if that resolves the issue.
cms deregister force.
Once deregistered go to config mode and do "cms enable".
Check the show cms info again.
Regards,
Kanwal
Similar Messages
-
when i download the windows support it stops in the middle of the bar and says; Device appears to be offline. HELP ME OUT!!
Try downloading from here http://www.apple.com/support/bootcamp/downloads/
Is your device correctly formatted in accordance with the Bootcamp Installaion Instructions? -
How do I turn my printer from 'offline' to 'online' and why does it keep going 'offline'?
Why does it keep saying my printer is 'offline' and there is no communication between computer and printer? How do I turn it 'online'? There doesn't seem to be an option to do so.
Thank you.Sorry that you are having a problem with the printer being offline.
Try to perform a hard reset on the printer. Unplug the power cord from the back. Leave it out for 30 seconds and plug it back in.
Are you connected USB or wireless?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it. -
I tried to download a movie on my iPod touch but due to limited space, it did not download. Then, I checked my credit card online, and I found the money was already taken. How will I get it to download on another device with the same account? Also, I was wondering why they took my money even when it did not finish downloading let alone get downloaded?
Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen. -
I am trying to find my lost iPad using my iPhone and the findmyipad application
My iPad is listed but cannot be located now because it is not connected to Internet
I have option to lock the iPad in lost mode If I do that I fear that will make it impossible for the iPad to go online and thus Renee the application to find it useless Please adviseYou cannot lock or find the device until it comes online. You can schedule a lock sequence to be sent once the device is online. That's it. Furthermore, if whoever finds the device completely erases it, then even when it comes online you will not be able to track it.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
i tried to open my adobe illustrator and this window popped up saying my trial had ended. i was not using a trial version, i have been paying monthly. so i went into my account online and my account still reads that my plan is active and will be until March 11, 2015. can you please tell me what the issue is and what i need to do to fix the problem.
The CC purchased in March 2014 is active & working. Please follow :
Creative Cloud products revert to trial after upgrading to Mac OS X 10.7.4 | CCM
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
In case the issue is still unresolved, you can use the Contact Support link in the above links.
Regards
Rajshree -
I m facing challenges while connecting to wi fi , i bought my 5s in dubai , however this is a verizon carrier activated device from US , so i m not getting support from apple uae, plz suggest , i bought 5s to simplify things and ended up making things very complex
You have not replied in full.
Check here warranty status https://selfsolve.apple.com/agreementWarrantyDynamic.do
Check here for Hardware troubleshooting.
Regarding warranty and out-of-warranty services you already have answer. Verizon will help only if they sold the iPhone.
Incidentally in UAE
Technical support for iPhone in this region is provided by the carrier, not Apple.
So, Contact DU.
Best -
All end devices shown as hosts and none as Storage
We have just upgraded to ver 2.1.2e fabric manager software and it appears that FM is not recognising the difference between hosts and storage.
Is this a bug or do i need to check a box somewhere?
Never had to before so....!
Thanks
JasonHello Jason,
To fix this, you can select in FM Physical Attributes -> End Devices -> Hosts and then select the Enclosures tab and change the Device Type to Disk wherever appropriate. Of course, this does not explain why the issue happened in the first place so... the first thing I would check would be the way the end devices registered themselves -- please check the output of "show fcns database" and verify if they have only scsi-fcp:target listed among their fc4-type features. When you installed the FM software, did you do an upgrade, or was it a clean install? What SAN-OS version are you running on the switches?
If the devices registered only as targets, but you still see them displayed as hosts, we could be talking about a bug. Please open a TAC SR so we can track this down. -
Dear all,
When I create a notification in SAP Work Manager 6.0, the notification gets created in the back-end with Start Date equal to Current Date + 1 day and End Date equal to Current Date + 3 days.
Can you advise where I can customize this behaviour, so that the Start Date is for example equal to the Current Date and End Date being 14 days in the future? Is this something that would need to be configured in Agentry Editor or within the ABAP stack?
Many thanks for your support.
Pavel
Tags edited by: Michael ApplebyHi Jason,
We went this route and identified the initial values, and tried to modify those.
No impact though, as if those values are being overwritten elsewhere (whatever value we set, no change on the backend).
Please see the attachments with screenshots of Agentry Editor.
Many thanks.
Pavel -
IP address and android devices - blondie needing h...
Hi all, totally new to this and im not very technically minded woman
Basically my 2 sons got asus nexus 7 tablets end of march.set up and both worked fine until 5/6 weeks later when one lost connection for no reason to Internet. Could still obtain signal from out home hub 2 but would just scroll through saying "authenticating" "obtaining IP address" "saved,secured by WPA/WPA2". After about 3 days after trying to forget it, resetting hub etc it suddenly connected again and was fine. It happened again a few weeks later but re-connected after a few hours this time. By middle if June it had happened again so rang bt. They lead me through all the same things and then told me it was a faulty tablet but I knew it wasn't as we had already taken it to the shop and it connected to their Internet straight away. Anyway the apparently changed the wireless settings from their end and miraculously it started working after an hour and a half on the phone. 2 days later same problem again but the other tablet this time ! Then 2 hours later it re-connected again. The first tablet them lost signal about a months later in the middle of July and now a month later we have the same problem with the first tablet so this time I think it must be the table, spent 1 hour in phone to google in America and went through lots of things and ended up resetting it to factory setting again and still wouldln connect. They sent me to asus who went though the same and said as we have switched off the other 3 wi-if devices in the house at the time and it still wouldn't get an IP address then it might be faulty and they would look at it but it no fault found would cost £45. It was switched off for 5 days and then suddenly last night my samsung s4 phone started doing the same, not obtaining and IP address and this is the first time it has happened to a phone.rang bt and spoke to the Indian call centre who went through the standard procedures of forgetting the hub on the device etc but didn't seem to understand that's this fault with a phone is the same as the fault that has been happening with the tablet for the past few months and my phone must be faulty. Well I was not impressed, he said he had done his best for me and nothing more he could do. After complaining I was paying for something I was not getting and was not happy as could see when this tablet goes away for repair there probably isn't a fault and I will be charged. he said he would put me through to technical support. Spoke to a lovely Scottish lady who straight away told me that bt do not support android. She said that possibly the new home hub 4 would be better but we would have to buy it at £35 plus £6.95 postage.
So my questions really are, what does it mean if bt do not support android? And why the heck don't they when they are one of the biggest operating systems, apparently they only support windows and mac
Also will this new hub make a difference?
Sorry for the long post, just thought it made more since to set the whole story out that 1 tablet keeps getting this problem montly, the other tablet only did it once and the mobile phone has now started doing it because the tablet is switched off and weirdly we switch the "faulty" tablet on and as it started the mobile phone sudden'y connected but the tablet woudnt !!!!!
Thanks for any help for a blondie who really doesn't undertsnad technology that much and if you do reply please make it as basic as possible for me to understandWhen the BT staff say they don't support Android what they mean is they have no knowledge of of it and don't know any way to make it work, not that it won't work on the BT Homehub. I have Android phone and tablet and they work perfectly on the homehub.
To start from a clean sheet you will need to carry out a factory reset of the home hub by pressing a pin into the reces button on the rear for about 20 seconds. The hub will then restart.
On your devices go into setting then select wifi and find the setting for your homehub. Select it then select forget. Restart the device and scan for wireless networks and select your homehub and log on using the wireless key found on the homehub. You should connect.
Once you have done that if you have a wireless device, such as a laptop download inSSider and check to see which is the best least congested wireless channel. Take note of the number.
Now go into the home hub setting and set the wireless channel on the homehub to that number.
See the links for inSSider
http://www.metageek.net/support/downloads/
and how to set channel on homehub
http://bt.custhelp.com/app/answers/detail/a_id/14094/~/how-do-i-change-the-wireless-channel-on-my-bt... -
Question about bluetooth communication between PC and mobile device
I am a newbie of bluetooth communication. This time I need to have connumication between PC and mobile device (mainly mobile phone) by sending strings. PC is acted as server and mobile device act as client.
For using bluetooth in PC, I use bluecove 2.0.1
I have already connected them successfully.
When I want to send strings between them, it is found that it can only do one cycle of communication (client -> server -> client).
For my design, they can communicate multiple times.
I simulate the core class of the system, the performance is fine.
Cound anyone help me to watch the code and give me some advices?
Server Side - ServerBox.java
public class ServerBox implements Runnable {
LocalDevice localDevice;
StreamConnectionNotifier notifier;
ServiceRecord record;
boolean isClosed;
ClientProcessor processor;
CMDProcessor cmd;
MainInterface midlet;
private static final UUID ECHO_SERVER_UUID = new UUID(
"F0E0D0C0B0A000908070605040302010", false);
public ServerBox(MainInterface midlet) {
this.midlet = midlet;
public void run() {
boolean isBTReady = false;
try {
localDevice = LocalDevice.getLocalDevice();
if (!localDevice.setDiscoverable(DiscoveryAgent.GIAC)) {
midlet.showInfo("Cannot set to discoverable");
return;
// prepare a URL to create a notifier
StringBuffer url = new StringBuffer("btspp://");
url.append("localhost").append(':');
url.append(ECHO_SERVER_UUID.toString());
url.append(";name=Echo Server");
url.append(";authorize=false");
// create notifier now
notifier = (StreamConnectionNotifier) Connector.open(url.toString());
record = localDevice.getRecord(notifier);
isBTReady = true;
} catch (Exception e) {
e.printStackTrace();
// nothing to do if no bluetooth available
if (isBTReady) {
midlet.showInfo("Initalization complete. Waiting for connection");
midlet.completeInitalization();
} else {
midlet.showInfo("Initalization fail. Exit.");
return;
// produce client processor
processor = new ClientProcessor();
cmd = new CMDProcessor();
// start accepting connections then
while (!isClosed) {
StreamConnection conn = null;
try {
conn = notifier.acceptAndOpen();
} catch (IOException e) {
// wrong client or interrupted - continue anyway
continue;
processor.addConnection(conn);
// activate the set up of process
public void publish() {
isClosed = false;
new Thread(this).start();
// stop the service
public void cancelService() {
isClosed = true;
midlet.showInfo("Service Terminate.");
midlet.completeTermination();
// inner private class for handling connection and activate connection handling
private class ClientProcessor implements Runnable {
private Thread processorThread;
private Vector queue = new Vector();
private boolean isOk = true;
ClientProcessor() {
processorThread = new Thread(this);
processorThread.start();
public void run() {
while (!isClosed) {
synchronized (this) {
if (queue.size() == 0) {
try {
// wait for new client
wait();
} catch (InterruptedException e) { }
StreamConnection conn;
synchronized (this) {
if (isClosed) {
return;
conn = (StreamConnection) queue.firstElement();
queue.removeElementAt(0);
processConnection(conn);
// add stream connection and notify the thread
void addConnection(StreamConnection conn) {
synchronized (this) {
queue.addElement(conn);
midlet.showInfo("A connection is added.");
notify(); // for wait() command in run()
// receive string
private String readInputString(StreamConnection conn) {
String inputString = null;
try {
DataInputStream dis = conn.openDataInputStream();
inputString = dis.readUTF();
dis.close();
} catch (Exception e) {
e.printStackTrace();
return inputString;
private void sendOutputData(String outputData, StreamConnection conn) {
try {
DataOutputStream dos = conn.openDataOutputStream();
dos.writeUTF(outputData);
dos.close();
} catch (IOException e) {
// process connecion
private void processConnection(StreamConnection conn) {
String inputString = readInputString(conn);
String outputString = cmd.reactionToCMD(inputString);
sendOutputData(outputString, conn);
/* try {
conn.close();
} catch (IOException e) {}*/
midlet.showInfo("Client input: " + inputString + ", successfully received.");
}For "CMDProcessor" , it is the class of message processing before feedback to client.
Client side - ClientBox.java
public class ClientBox implements Runnable, CommandListener{
StringItem result = new StringItem("","");
private DiscoveryAgent discoveryAgent;
private String connString;
private boolean isClosed = false;
private boolean boxReady = false;
StreamConnection conn;
private static final UUID ECHO_SERVER_UUID = new UUID( "F0E0D0C0B0A000908070605040302010", false);
Form process = new Form("Process");
ClientInterface midlet;
public ClientBox(ClientInterface mid){
this.midlet = mid;
process.append(result);
process.addCommand(new Command("Cancel",Command.CANCEL,1));
process.setCommandListener(this);
new Thread(this).start();
public void commandAction(Command arg0, Displayable arg1) {
if(arg0.getCommandType()==Command.CANCEL){
isClosed = true;
midlet.notifyDestroyed();
public synchronized void run() {
LocalDevice localDevice = null;
boolean isBTReady = false;
/* Process Gauge screen */
midlet.displayPage(process);
Gauge g=new Gauge(null,false,Gauge.INDEFINITE,Gauge.CONTINUOUS_RUNNING);
process.append(g);
showInfo("Initalization...");
System.gc();
try {
localDevice = LocalDevice.getLocalDevice();
discoveryAgent = localDevice.getDiscoveryAgent();
isBTReady = true;
} catch (Exception e) {
e.printStackTrace();
if (!isBTReady) {
showInfo("Bluetooth is not avaliable. Please check the device.");
return;
if(!isClosed){
try {
connString = discoveryAgent.selectService(ECHO_SERVER_UUID, ServiceRecord.NOAUTHENTICATE_NOENCRYPT, false);
} catch (BluetoothStateException ex) {
ex.printStackTrace();
else return;
if (connString == null) {
showInfo("Cannot Find Server. Please check the device.");
return;
else showInfo("Can Find Server, stand by for request.");
boxReady = true;
/* True if the clientbox is ready */
public boolean getBoxReady(){
return boxReady;
/* True if the clientbox is closed in run() */
public boolean getIsClosed(){
return isClosed;
public String accessService(String input) {
String output = null;
try {
/* Connect to server */
StreamConnection conn = (StreamConnection) Connector.open(connString);
/* send string */
DataOutputStream dos = conn.openDataOutputStream();
dos.writeUTF(input);
dos.close();
/* receive string */
DataInputStream dis = conn.openDataInputStream();
output = dis.readUTF();
dis.close();
} catch (IOException ex){
showInfo("Fail connect to connect to server.");
return output;
private void showInfo(String s){
StringBuffer sb=new StringBuffer(result.getText());
if(sb.length()>0){ sb.append("\n"); }
sb.append(s);
result.setText(sb.toString());
}Client side - ClientInterface.java
public class ClientInterface extends MIDlet implements Runnable, CommandListener{
private ClientBox cb = new ClientBox(this);
private Form temp = new Form("Temp");
private Command select = new Command("Select", Command.OK, 1);
private Command back = new Command("Back", Command.BACK, 1);
Alert alert;
String[] element;
String out;
List list;
public void run(){
/* Send message and get reply */
out = cb.accessService("Proglist");
element = split(out,",");
/* Use the reply to make list */
list = createList(element[0], List.IMPLICIT, out);
list.addCommand(select);
list.addCommand(back);
list.setCommandListener(this);
Display.getDisplay(this).setCurrent(list);
public void startApp() {
System.gc();
waitForBoxSetUp(); /* Recursively check for clientbox status */
new Thread(this).start();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
notifyDestroyed();
public void displayPage(Displayable d){
Display.getDisplay(this).setCurrent(d);
private void waitForBoxSetUp(){
while(!cb.getBoxReady()){
if(cb.getIsClosed())
notifyDestroyed();
public void commandAction(Command c, Displayable d){
if (c.getCommandType() == Command.OK){
if (d == list){
/* Send the choice to server */
out = cb.accessService(list.getString(list.getSelectedIndex()));
alert = new Alert("Output", "selected = "+out, null, AlertType.ALARM);
alert.setTimeout(2000);
Display.getDisplay(this).setCurrent(alert,list);
if (c.getCommandType() == Command.BACK){
notifyDestroyed();
public void showWarning(String title, String content){
alert = new Alert("Output", "selected = "+list.getString(list.getSelectedIndex()), null, AlertType.ALARM);
alert.setTimeout(3000);
Display.getDisplay(this).setCurrent(alert,list);
private List createList(String name, int type, String message){
List temp;
String[] source = split(message,",") ;
temp = new List(name, type, source, null);
return temp;
private static String[] split(String original,String regex)
int startIndex = 0;
Vector v = new Vector();
String[] str = null;
int index = 0;
startIndex = original.indexOf(regex);
while(startIndex < original.length() && startIndex != -1)
String temp = original.substring(index,startIndex);
v.addElement(temp);
index = startIndex + regex.length();
startIndex = original.indexOf(regex,startIndex + regex.length());
v.addElement(original.substring(index + 1 - regex.length()));
str = new String[v.size()];
for(int i=0;i<v.size();i++)
str[i] = (String)v.elementAt(i);
return str;
}i haven't worked with devices but only with the toolkit emulators;
it definitely is possible...
u have to send the image as a bytestream and receive the image at the jsp end...
and then reconstruct the image.
the Stream classes in J2ME AND J2SE are all u will require.
also the Image class.
i have not done this but i have successfully sent an image frm a jsp and displayed it on the emulator. -
Why is ipad2 still online and active when supposedly in lost mode and locked?
hey all,
i need some help regarding a situation i'm in!! the overview is i'm going through a messy breakup at the moment and my ex has possession of my ipad2 (a wi-fi model that's running ios6)!! it's supposedly for my 7 year old son's use (he's autistic)!! anyway, since it's registered to me, i had restrictions enabled with a 4 digit pass code where i had location services turned on, and i disabled my mail account and other things that would not be appropriate for my son to use or access, such as skype, facebook, etc!! basically, all that was on it was his game apps, safari, youtube and our photos of days out etc!! my ex was paranoid i was spying on her through the location service....... i explained that it was a security feature that would enable it to track it if it was lost or stolen!! she even thought i was listening to her conversations and watching her through the camera!! i explained this was absurd and paranoid!! anyway........
well, here's the problem!! after having the restrictions enabled for months, oddly enough after receiving a summons last week requesting her to attend court next week concerning the matter of my contact with my son, i noticed yesterday on my find my iphone app on my icloud account on my macbook the locations services was disabled and the ipad was online, being used!! realizing immediately she's obviously figured out my restrictions pass code and turned off the locations feature!! i immediately put it into lost mode (receiving an email confirming), and within minutes, it was offline for about 4 hours!! in the afternoon, i checked it again, lost mode was disabled and it was being used....... so i put it in lost mode again! 30 seconds later, it was disabled........ finally, i put it into lost mode and added a message that would be displayed on the screen stating 'be warned: i am aware you are using my passcode and password without my permission, which is a criminal breach of my privacy! ignore this & i will report to the police!'! it went offline! 7pm i received a text to my iphone asking my my son couldn't access the ipad and why was there a request to phone her! i ignored, as i know this was a game!! whilst in work, i received an email to my icloud mail inbox stating that 'lost mode had been enabled'......... making me realize she must also have access to my apple ID to gain access to icloud to enable lost mode! it stands to reason that you cannot tell the device you are actually using it is lost and lock it down!! finally, i updated the lost mode with a new message stating i was going to the police and she freaked out!!
so, that's the situation! the questions i need answered are:
*aside from a lucky guess, how else could she get my pass code and icloud pass word? is it possible the ipad has been jailbroken, hacked or spyware has been used to get my pass code and password?
*how come, when in lost mode, it says on the find my iphone feature on icloud that it's active (green spot) and 'online: location services disabled'? should lost mode not render the device unusable? i monitored it for at least an hour last minute...... it kept changing it's status from 'online: location service disabled' to simply 'offline'!
*in the 'find my iphone' app on icloud, next to the lost device, there's a symbol of an orange padlock! what does this actually mean? if it means it's locked, then how can it be online and seemingly active?
just to cap off, i've requested the device be returned to me (my ex has ignored this, stating only she intends to replace this device so she's free from my control and spyware) and i've contacted my solicitor who has offered to send an official letter requesting it's safe return!! as the device is registered in my name and contains my personal information, i understand the implications for her is that she's committed theft and possibly used criminal means to invade my privacy!!
any help or advice would be greatly appreciated!
alexjust giving this a wee bump as time is of the essence here and i need advice/ answers quick!
apologies if i've broke any rules!
alex -
Order iPhone 5s online and do unlimited data plan swap later?
Forgive me if this question has already been asked:
I'm looking to upgrade to 5s (from Droid incredible). I have unlimited data plan. My wife has a flip phone and will stay with dumb phone. We are both eligible for an upgrade, and are planning to do the swap described elsewhere where she gets the smart phone and a data plan with her upgrade, I get the dumb phone with my upgrade, and then we trade phones and she cancels the data plan.
Question is: can this be accomplished (or more likely started) by reserving the iphone 5s online instead of going to a store? Is it as simple as ordering the phone for her number through the Verizon website (or Apple's?), and then once it arrives, heading to the Verizon store for all the swapping and purchase of new flip phone?
Thanks to anyone who an help! In the end, I don't need the iphone immediately. But would hate to haves to wait too long, and concerned about stock levels and driving all over town chasing phones.Ann154 is correct. That will not work.
This is what I would do: Upgrade to the iPhone on your wife's line. You can order it online and activate it right through My Verizon online when it comes to your house. You must activate it on her line first to accept the contract terms and conditions.
Do NOT use your line to upgrade to a basic phone; buy your wife a basic phone off contract. You can find them reasonably priced on many retail and auction sites.
Move the iPhone to your line, which keeps its unlimited data, and activate the off-contract basic phone on your wife's line. -
I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.
It downloaded all my contacts, photo's with no problem. I called the number they gave me from my old phone and then turned it off. I then put the sim card in and charged the phone. I followed all the setup steps and no I cannot send any text or make any phone calls. I get a message that they cannot authenticate my phone to dial #8899 but get the same message.Hello Notahappycamper1962
Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
I look forward to hearing from you and getting this addressed.
JoeL_VZW
Follow us on Twitter @VZWSupport -
On its own, mac goes online and launches safari. WHY?.
i have a powermac G5, but am using an ATT dial-up. i know.
when we wake up the mac,
more often than not, it immediately starts dialing out, going online and then launching safari.
anyone else have this problem?First off, you might have better luck posting in the correct forum. This is the forum for eMac support. Having stated this, I'll take a stab at your problem. I think it has to do with the way you have configured your Internet access. See this page (specifically question 4) for more information:
Frequently Asked Questions for PPP Modem Connections
In short you must do the following:
1. Choose System Preferences from the Apple menu.
2. Click the Network icon.
3. Be sure the Show pop-up menu is set to your modem (the "Configure" menu prior to Mac OS X 10.1), or other dial-up device.
4. Click the PPP tab.
5. Click PPP Options.
6. Uncheck the box marked "Connect automatically when starting TCP/IP applications" option.
7. Click OK.
8. Click Apply Now ("Save" prior to Mac OS X 10.1).
That should do the trick. If not, however, you ought to think about posting your question in the PowerMac forum, or better yet, the Mac OSX forum.
Best of luck,
Joe
iMac Intel Core Duo 20", 2 GB RAM, OWC 300 GB FW HD Mac OS X (10.4.5) eMac 1.42GHz, 1 GB RAM; iPod w/ video 30 GB
Maybe you are looking for
-
HT1203 How do I get my music from the iTunes library to my iPod touch?
How do I get my music from the iTunes library to my iPod touch?
-
SWDD abends when dragging a step type into existing template
Hello, The following steps cause an abend. Has anyone seen this and found a fix? - Start transaction SWWD - drag a new step type into an existing workflow template - at the cursor a plus sign displays - upon releasing the mouse button the program ab
-
Sending Data from BI to Third Party System through CIB Interface
Hi Experts , We have a requirement where we need to send data from BI to any Third Party System through CIB Interface . We do not have to use the OHD's . Please share the documents for the same . Regards Garima
-
Playing AVIs in Quicktime on Intel Mac
I have Quicktime Reader 7.1 and it works fine on my Intel based iMac. Except that now I am trying to import AVI movies taken on my camera and it quits every time I try to open a file. The equivalent files run perfectly well on my Power PC Mac that si
-
Hi Friends, I want a copy of existing DC with different Name, please give me how to achieve this? My requirement is, I have to replicate the existing DC with new name and needs to do some modification and this will become the new component with enha