CM: how to block the last new sales order only and not all of them?

Hi,
We are testing the FSCM-CM and try to figure out this:
We have for a customer a number of open sales orders that are all below the credit limit.
Now someone creaetes a new order and with that amount the limit is exceeded.
The system reaction is that all open orders are blocked.
How can we set the system that only the last one is blocked?
Thanks in advance
Hein

Hein,
I dont think there is any standard function which specially points to the last order. System will consider all the orders in which the customer is involved. I think, the above post suggest the of number of days but not the last order. Try to play with the attributes of system messages and I am sure you will get a clue from it..
Reward if helpful..
Thanks,
Srib

Similar Messages

  • How can I create a new sales order template

    Hello,
    how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
    Thanks for your support in advance.
    Best regards,
    anvan

    Hi,
    Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
    regards Camilla

  • How can I create a new sales order template in SAP CRM 7.0

    Hello,
    how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
    Thanks for your support in advance.
    Best regards,
    anvan

    Hi,
    Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
    regards Camilla

  • HT201317 How do I transfer ALL my photos from iphone to photo stream? I have just turned on my photo stream on my PC and it only copied some photos and not all of them.

    How do I transfer ALL my photos from iphone to photo stream? I have just turned on my photo stream on my PC and it only copied some photos and not all of them.

    Photo Stream will only transfer photos taken in the last thirty days.
    Connect your iPhone to your PC and transfer the photos manually.
    See here:
    http://support.apple.com/kb/HT4083

  • How to restrict the Number of sales orders in theTCode:VL10A whil creation

    I'm creating the Delivery by using the batch job with program: RVV50R10C Here I need to restrict the number of sales orders numbers while creating deliveries for sales orders
    Like system should pick the sales orders (sales documents) from 1 to 100 OR 100 to 200
    Please advise me how to do it and what changes I need to do it

    Hi,
    Aslo, you can see Note 198137 - VL10: Customer-specific enhancements / user exits. As is for SO, check subroutine LV50R_VIEWG03. If cf_subrc = 1 thin this SO isn't seen in list.
    ***INCLUDE LV50R_VIEWG03 .
    *&      Form  POSTAB_VEPVG_FILL_USER
    FORM POSTAB_VEPVG_FILL_USER
         USING    IX_LIST_PROFIL    TYPE      SHP_VL10_LIST_PROFIL
                  IX_PARAMETERS     TYPE      SHP_VL10_PARAMETERS
                  IX_SELECT_OPTIONS TYPE      SHP_VL10_SELECT_OPTIONS
                  IT_ENQUEUE        TYPE      SHP_VL10_PACKAGE_T
                  IX_SD_ORDER       TYPE      SHP_VL10_SD_ORDER
                  IS_VEPVG          TYPE      VEPVG
         CHANGING CS_POSTAB         TYPE      SHP_VL10_ITEM
                  CF_SUBRC          TYPE      SYSUBRC.
    CF_SUBRC = 0.
    *  cs_postab-zzfield = ......              "add new field to List
    *  if xxxxxxx = yyyyyyy.
    *    cf_subrc = 1.                         "Exclude this index from List
    *  endif.
    ENDFORM.                    " POSTAB_VEPVG_FILL_USER
    I hope this helps you
    Regards
    Eduardo

  • How to block material issuing after sales order invoiced?

    As the subject mentioned,  could be a possible to block material issuing since sales order invoiced, or
    in the another words, after the sales order completed?
    Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
    forbidden?
    Thanks in advanced,
    Zhou Zhen

    Dear Friend
    A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
    That means the order 10000 is closed
    Case 1
    Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
    This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
    Case2
    But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
    Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
    But you can test it if it throws any warning message we can try to convert that error
    But in case 2 it is not happening(even warning is not there)
    Regards
    Raja

  • How to extend CMIR to new sales org's and distribution channels

    Hello,
    i need to extend existing CMIR's to new sales org's and disttibutiion channel combo's, i have about 24000 records that need to be extended to around 300 new sales org's and disttibutiion channel combo's.
    is there a way to do this without having to do a lsmw recording.
    Thanks,
    Zair

    hi,
    please follow LSMW:
    Recording VD51                 VD
            VD52 Maintain Cust-Mat.Info w/Select.Scrn
                RV10A001 1000
                    BDC_CURSOR                     KUNNR
                    BDC_OKCODE                     =ONLI
                    KUNNR                          2000004531
                    VKORG                          GB20
                    VTWEG                          99
                RV10A001 1000
                    BDC_CURSOR                     KUNNR
                    BDC_OKCODE                     /00
                    KUNNR                          2000004531
                    VKORG                          GB20
                    VTWEG                          99
                RV10A001 1000
                    BDC_CURSOR                     KUNNR
                    BDC_OKCODE                     =ONLI
                    KUNNR                          2000004531
                    VKORG                          GB20
                    VTWEG                          99
                SAPMV10A 0200
                    BDC_CURSOR                     MV10A-MATNR(01)
                    BDC_OKCODE                     =SICH
    hope this clears your issue
    balajia

  • How to get rid this Warning=Sales order (SOBKZ = ) is not provided for this

    Dear Concerns
    In MB1C, Mov Type=521E, and the batch no=A.
    After entering all the required entries the systen gives me the warning and the system  save the transaction after pushing the enter button five to six times.
    Sales order (SOBKZ = ) is not provided for this goods movement.
    I want to get rid of this warning .
    So that the system could save the transaction in one click.
    Regards:Vijay

    Hi
    Can u please tell me the solution of that issue as in my case the item has to be received
    and reserved against the sales order.
    can i make my sales order item cate mark with the special stock indicator and
    does it help to solve my problem
    Yes this will only solve the problem. You need to mark your sales order item cate with special stock indicator E
    Then PGI will be smooth otherwise you can expect problem
    This reply is for the other friend
    In-IMGMaterials ManagementInventory Management and Physical Inventory---Define Attributes of System MessagesSettings for System Messages----
    Here in the new entries add message M7---374 with version as 00 and make that as error message and save it
    Regards
    Raja

  • How to trigger an Idoc from Sales order creation and change

    We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
    Follow the below steps:
    1. Go to NACE transaction
    2. Select V1 application and select OUTPUT TYPES
    3. Select the required output type and double click on Processing routines.
    4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
    5. Save it.
    message type ORDERSP in the distribution model (BD64).
    Follow the below steps to configure the condition records:
    1. Go to NACE
    2. Select V1 application and select CONDITION RECORDS
    3. Select the requred output type and click on Condition records
    4. Selection screen will be displayed.
    5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
    Sales doc type = OR
    Funt = SP
    Partner = blank. It means there is no restriction on partner numbers.
    Medium = A
    date/time = 4
    Lan = EN.
    Note: partner is left blank means, the sales order of type OR can be send to all partners.
    6. Save it.
    We also done ALE configuration.
    We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
    Kindly suggest the solution.
    Regards,
    Sharad Dixit

    Hi ,
    Please check the total error description and diagnosis as below :
    InVa02 enter SO  go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
    Please paste the diagnosis .
    Thanks and Regards,
    P.Bharadwaj

  • How to remove the last new line in text area ?

    I have a calculator Applet that shows the calculation in a text area.
    if i enter 2+6, the text area shows
    2+
    6
    and i have a clear last button, which deletes the last entry by user.
    in the example above, one hit of clear last, deletes 6. another hit should delete +.
    I can delete the numbers, but I don't know how to go back to the previous line and delete the operator.
    I may have other calculations in that text area above the current calculation. so replaceAll("\n","") would not work here.
    Please someone help me here.

    it's an applet, i am developing in Eclipse ( mac environment)
    so for deleting a number i used this code, and works fine
    String temp = t.getText();
                             String lastChar = temp.substring(temp.length()-1);
                             for (int i=0; i<numbers.length; i++) // deleting a number
                                  if (lastChar.equals(numbers)){
                                       temp = temp.substring(0,temp.length()-1);
                                       number = number.substring(0,number.length()-1);
                                       t.setText(temp);
    which t is the text area, and numbers is the string array of 0 to 9, and number is a string where i store the entered number
    so i thought for deleting an operator i should use something similar, where i need to go back to the previous line and delete it,
    String temp = t.getText();
                             String lastChar = temp.substring(temp.length()-1);
                             if(lastChar.equals("n")){
                                                            temp = temp.substring(0,temp.length()-3);// deleting n , \ , and the operator
                                       t.setText(temp);
                             } but it doesn't work

  • Credit management how to block amount on particular sales order

    hi,
    Client want to block amount on sales order.
    If customer is having credit limit of 100000 n there are 3 sales order , sales order 1 amount is 50000,sales order 2 amount is 30000 and sales order 3 amount is 40000...
    Now customer is coming n saying I want 40000 amount material of sales order 1.here my client want to block 50000 for sales order 1 so customer can not use amount for other sales order , system will check credit limit is 100000 and out of 100000 system should block 50000 for order 1.
    Solution required...
    If this is not possible then suggest me possible solution.
    please suggest...

    please note what you require is not possible in SAP.
    Therefore there is no standard solution.

  • How to view the cancelled/deleted sales order?

    Hi SAP Gurus
    I there any T.code/Table to view the cancelled or deleted sales order.
    I am not able to view the order even in VA03.
    Regards
    Giridhar

    Dear Sushmitha,
    T. Code: SE16
    Key-in -
    Table: CDHDR - Change Document Header.
    Table: CDPOS - Change Document Items.
    and "Enter". On to next page, Key-in
    Field: Change doc. object (OBJECTCLAS) as VERKBELEG
    Field: Transaction Code as VA02
    Field: Appl.obj.change, as D - Delete, and execute (F8).
    Then you will get object values (sales orders) and document numbers. Pass these two values along with objectclas: VERKBELEG) to table CDPOS to get more details about these deleted orders.
    Also, Go to -
    T. Code: SE38,
    and execute Report: RVSCD100.
    Enter Sales Document Number and Execute. This will provide information, who deleted the order.
    Best Regards,
    Amit

  • How to change the price in sales order copying from contract?

    Hi All,
    I am creating a sales order with reference to contract & the same prices in the contract are flowing. But the validity of prices are expired & I am unable to edit the prices in the sales oerder level.
    Please suggest what configuration need to do to edit prices in the sales order level.
    Thanks,
    Madhu

    Hello Madhu,
    I am creating a sales order with reference to contract & the same
    prices in the contract are flowing. But the validity of prices are expired
    & I am unable to edit the prices in the sales oerder level.
    Please suggest what configuration need to do to edit prices in the sales order level.
    The configurational setting for changing the pricing flow from Contract to Sales Order is in Copying control. Go to the T-code VTAA and select your relevant Contract and Sales Order. At the Item level itself, you shall find a control called PRICING TYPE. Select the option as B or C.
    Please try out this approach so that your issue related to pricing flow can be avoided.
    Regards,
    Sarthak

  • Regarding the script of sales order(customer no. not displaying)

    Hai all,
    I have made a zcopy of sales order standard program(ZRVADOR01) and sales order standard script(ZRVORDER01). now my requirement is , in the displayed script there is info window. In that window customer number with field vbco3-kunde is displayed. but the requirement is they want this customer number in the address window. but when i run the transaction with debugging , it is not displaying this vbco3-kunde value in the address window.how to transer this value from this info window to address window . i have tried with set parameter but it is not working. i have tried by declaring a variable in the copied z-standard program and calling in z-standard script but still it is not displaying the value. please let me know the solution for this issue as soon as possible.
    points will be awarded.
    Thanking u in advance,
    A.Srinivas

    Hello,
    Try with using VBDKA-KUNNR instead of the VBCO3-KUNDE.
    Regards,
    Naimesh Patel

  • I can see only the last received fax in my PC and not all of them using a Officejet Pro 8600 Plus

    I create a file in my desktop where received faxes can be saved. Indeed, i can see the received fax, but if i receive one more, it replace the previous one. Thus, i can see only the last received fax. How can i see all them and not replace one another?
    This question was solved.
    View Solution.

    Hello there! Welcome to the forums @pasma ,
     I read about the issues you are having with saving your faxes on your desktop. I noticed you mentioned you had created a file. I would suggest creating a folder instead and that should help with the saving problem!
    Let me know how that goes for you, have a great Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for