Cm not seeing updated logs

I've had 2 occurences in the past 24 hours of users getting "Connection reset by peer: socket write error" on one of the 2 CM they connect to. I can connect to the other but see no logs updated, looks like since the other CM lost its connection.
I have to restart Tidal services on both CM and the master/backup to get all information going again.
I have Tidal 6.03 FT with 2 CM - all on VM's and a SQL DB.
Anyone seen this before? Anyone have a resolution I can look at?

Is that in the CM logs or in your client browser? what Browser are you using? Have you externalized the database? How are you 2 CMS setup (infrastructure and network)? We probably need more information to help.
I don't think you are alone in seeing timing issues when looking independently at each CM. They may have different "synch" intervals and may need to be configured / tuned. There are some documents out there for that... Certainly having Cisco review would be the best option.
Marc

Similar Messages

In iOS 7.0.2, Appstore updates can not see updated apps

Hi. i am using iPhone 4S with iOS 7.0.2.
I am updating some apps when updates comes but when i look notification center , some times i can see updated apps in notification center and the problem is Appstore updates can not see in all items .And some times, there is no any blue point some times but.
Is this bug?
Second question is; when i use assistive touch, some times, notification center and control center can not work. What about you.
Note: i installed in DFU mode and clean installed ios 7.

Then readd the account.
settings - mails - add - the account.

Finder / Automator not seeing updated (by Win) directories

Hi all
I am trying to create a workflow where part of the acction is done by Win, then some part by Mac.
Win and Mac part a working fine by themself.
Parallels runs Windows XP
The Win part creates a file inside the Win directory. This same directory is visable on the Mac side but does not update when Win saves the file.
Consequently Automator does not see the update and never starts the next part of the process on the Mac side.
How can I force the update on the Mac side?
Thanks for any help
Romano

Just got off the phone with SonicWall Support and here is the solution to the AirPlay issue:
Follow these directions:
http://www.fuzeqna.com/sonicwallkb/consumer/kbdetail.asp?kbid=9059&SearchType=ad vanced&referrer=&gpn=&CustID=&bUseEditor=&keyword=airplay&rfield=&sortmethod=re l &usertype=&gpv=&catID2=&formaction=search&catID1=&IncludeHTML=&logsearch=False& c atID3=&TotalResults=5491&sct=KB&submitbutton=Go&match=and
http://www.fuzeqna.com/sonicwallkb/consumer/kbdetail.asp?kbid=10132
If you want to only allow the AirPlay/Bonjour ports, use this list:
http://bowersandwilkins.custhelp.com/app/answers/detail/a_id/55/~/firewall-ports -utilised-by-airplay
Finally, enable Interface Trust on the Wireless Interface (Network > Zones).
AirPlay will work via wireless using these directions!

Two users sharing project, not seeing updates

Using RH8 with RSC3.1 and XP.
Recently I added a project in RSC3 using the Windows Credentials for the user logins, as had been suggested in response to another posting I made on this forum. The logon part seems to be working fine.
The day I re-added the project to RSC on the first and second users PC's, the topic count for the second user was less than the first users total (per the total displayed at the top of the Topic Properties report.
So I removed the connection in RSC for the second user, copied the first users project to the second users PC and added a connection to the project in RSC. At that point they both had the same topic count.
The first user has done some work on the project, and the changes are not being added to the second user's list of topics when she responds to the GET LATEST VERSION dialog when she opens the project.
Is there a setting or a cause for this that makes sense?
Any help would be greatly appreciated.
Regards,
Joe

Still using Win XP with RH8.0 and RSC 3.1
There was a new project the second writer had created since my last posting, and needed to share with the other writer. Seemed like a good opportunity for a fresh start to test this problem, with a smaller number of topics to deal with.
Below is what i did. Results about the same.
UPDATE: While I was writing this posting we discovered something that may be the whole problem. Skip to #4 in the ON THE SECOND WRITERS MACHINE list to see that info. I didn't want to remove the following in case it helps.
On the server:
1. I created a database for the new project.
2. I created accounts for both writers with the "Use Windows Login" option.
On the original writers machine:
1. Using RSC I created a connection to the database.
4. On the original writers machine I added the project to the database.
ON THE SECOND WRITERS MACHINE:
1. using RSC I created a connection to the database.
2. I created a folder for the project.
3. Using RSC I selected all the file / folders in the project and did a get, directing the files to the folder created in step 2.
4. When the project was opened there were about a dozen topics listed as broken links. They could not be restored.
5. I removed the connection, and the project, and came back to finish this posting.
DISCOVERY: The original writer dug around and realized that all of the topics involved in the broken links list were within folders, in the topic list within the project.   We used the History View option in RSC to copy the HTML back into replacement topics in the project, but put them in the main list, NOT in folders. At that point....
Again On the second writers machine:
1. In RSC, I added a connection and a project folder.
2. Then did a Get to the new folder.
3. Ran the project and all the recreated topics were there.
BOTTOM LINE: It appears the problem is the folders.   The original project I encountered this problem with has many folders, and had many broken links when we tried to add it for the second writer.   We have to have the second writer involved with it.
These two writers have projects that end up with many, many topics. They use the folders to organize them.    I don't use that approach, I prepend a name or function to related topics to group them so I can locate them easily.   Then I deal with removing the prefix from the name in the TOC. Either way is not really pretty.
I thought folders were virtual, and transparent to the project, but perhaps that is just for images? It doesn't seem RH should let you create folders if they create obstacles in sharing the project.
Is there a way to use folders to organize topics and not have this happen when the second writer GETS the project?
Again, any information you provide is greatly appreciated. This has been a huge headache, but at least we seem to have figured out why it is happening, and can move forward.
Regards,
Joe

I can not see PR 1.3 update in My N900 RX-51 Vodaf...

Hello, I have Nokia N900 RX-51 with Vodafone sim here in the UK but I can not see update for PR 1.3 in the app manager. I have checked app manager couple of times but could not find any update. Any one can help me please ???
Thanks

Yes... Seriously Nokia... why the announcement when they're not available everywhere..
the funny thing is that I have been trying to search for threads about people not getting this update... and there are not many... either Nokia users are too "patient" to wait for anything from Nokia or they simply gave up already....

SystemWideClassABPWP in RZ20 not getting updated

Hi All,
We need some help from you.
We have shortlisted the monitoring contexts in RZ20 around which we would like to configure our alerts in the system.
But just one concern, here in the monitoring tree under the monitoring tree Background, we have shortlisted SystemWideClassABPWP which tell the System Wide Class A Background Work Process across the instances.
But, we noticed that the value for this particular parameter is not getting updated (value 5 in the below screenshot).
The SystemWideClassABPWP and SystemWideTotalBPWP show inactive. This also seems to be non-modifiable (as per the legend in rz20)
Any clue as to how to activate them and update them with the latest value.
Thanks in advance and any pointers would be appreciated.
Warm Regards
Rajeet

Hi Michael,
Thanks a lot for your reply. But we find that these parameters are not getting updated and so we do not see the log like Green 06.03.2008 , 20:03:31 besides them (for other )
One more thing is we have 2 application servers (1 central instance & other application instance) with each having 5 work process for A priority jobs and 20 work processes for other jobs. So these parameters should show the values as
SystemWideClassABPWP - 10
SystemWideTotalBPWP - 40
But this is not the case. Also, when the operation mode changes these values are not getting updated.
Request your kind help in this regard.
Warm regards,
Rajeet

Customers not able to log in with Microsoft ISA server firewall.

I have a few external customers that are having issues logging in. In all cases it is with the customer having Microsoft ISA firewalls.
They can get to the site. They put in their username and password. The screen flashes back to the logon screen, no errors, just back to the screen.
On the logs I seen the logon page request and the 200 OK but, the username and password never come across.
I can not tell if the username and password are being blocked by the ISA server or when the logon screen is presented that the username and password fields are just not active.
Has anyone else see or hear about this one?

We are seeing a slightly different problem but certainly related. We are using a SAP cFolder server for PLM collaboration. Companies using a Microsoft ISA server are not seeing problems logging in but are seeing problems with the mass download feature. They are seeing the connection hang. Looking at the ISA log file on the server they are receiving an authentication problem and a broken connection. If you try a single file download everything works OK. Also vendors without ISA are working fine.
What is it about ISA that would be causing issues like these?

SOST - transmission requests- How to see the log in a table

We see the messages and the log in SOST for a background job.
We want to see the log contents in a related table.
We checked table SOOD but can not see the log details.
Is there any way to see / extract log details by giving the user ID , created date and job name?
Regards,

Hi
If you are using the Extending classic, you can see the output details in the SOST. suppose if you want to check whether the PO send to vendor or not viea email.
BR
Satish

Details Data in SAP BI could not be updated completely: see log

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal

Read does not see last update

I've got multiple thread reading and modifying the same objects. Sometimes a read by one thread does not see a change made and committed by another thread. Looking at the log shows the update was done and it set the field properly. But the next read query returns the object with the old field value. Out of 100 executions this only occurrs 1-3 times. Is this a case of reading the old value from the read cache? If so, what is the best way to insure the read gets the latest version? I've tried setting the existence checking to database first and it didn't make any difference.

Rick,
I am going to assume this is all being done in a single JVM with a single ServerSession and thus one shared cache. If this is incorrect please correct me.
When the scheduler commits the changes made are written first to the database and then following the commit they are made to the cache. You said the JMS messages are committed in the same JTS TX. I would verify that the JMS messages and UnitOfWork are actually being committed together.
If all of the JTS TX stuff is right then what you are saying is that in a small percentage of cases the runner task is receiving the JMS message and reading the cached version of the objects prior to the scheduler's UnitOfWork completing its merge. This seems very unlikely given the simplicity of the changes described (but weirder things have happened, and its halloween).
What I would check next is to make sure the runner task is forcing a refresh of the (query.refreshIdentityMapResults) and if you are using optimistic locking then configure the descriptor to onlyRefreshIfNewerVersion. Let us know if this eliminates the condition and if all of my assumptions are correct.
Doug

The software update failed. And it's not seeing iphone when connected.

When I logged in it said there was an update for iTunes software. However the update failed. I quit iTunes. I then plugged in my iphone but iTunes is not seeing it.

Are you able to update iTunes using a .dmg downloaded from the Apple Website?
http://www.apple.com/itunes/download/

Windows update - Not seeing all types of updates when checking

My problem is at one time, our 2008 R2 servers were all in a separate OU as all other machines and we had a GP for all of our Windows 7 machines to get updates from our WSUS. Well, someone applied that policy to the whole domain which made the server
OU inherit the WSUS policy. Before I was in the position to manage our servers, previous admins would disable the policy, perform a gpupdate /force on each server and then download and install updates.
I fixed this in group policy so that the servers can go out to the Windows update site and get updates but I am not sure they are getting everything they need. For example, I have an Exchange 2010 server which needs some security patches based on a
scan with MBSA. One id UR 8 for Exchange 2010 SP2 and one for SP2 for MS Office 2010 filter pack. They are both security which I would think should show up when checking for updates. I also have some servers that are missing SQL 2008 security
updates along with Visual C++ 2008 and Visual Studio 2008 security updates. They aren't showing either.
Is there a way to check on each server where it is going to check for updates? I have looked in some places in the registry but I can't find anything. Below is a couple of screen shots to show what it looks like on the Exchange server.
David Hood

Have you enabled "get extra updates from Microsoft" ? (this enables product other than Windows, to get updates)
If you are seeing updates for Windows, but not updates for Exchange nor SQL - then it's likely that those updates are not being published to WU/MU.
DUH!!!, I did a face palm when I saw that first line. Didn't even cross my mind to look at the log. I did find where it is going to the Microsoft site to search for updates.
Nevermind!!! Had a brain fart. I just saw the link at the bottom of the Windows update page on the server where is says "Get updates for other Microsoft products. Find out more". I clicked the "Find our more" link and
it took me to the Microsoft site to install Microsoft update. I did that, it ran another check, and BOOM, all my updates are there. I spent a while on this issue this morning and couldn't find anything. I feel a little stupid now, haha.
Thanks for the ultra fast responce though. It helped me alot.
David Hood

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

Hey GingCarv,
Great question. You'll want to download the movies from your purchase history. The following article explains how to do so:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Note: At this time, movies are not available for automatic downloads.
Thanks,
Matt M.

My phone has blue screen od death due to ios7 malfunction there for in usable how can i see if my contacts are backed up to icloud. it will not let me log on

i have the blue scrren of death on my iphone 4s due to the ios7 software malfunction which i am not happpy about. my icloud will not let me log into it which s making e frustrated. i am reciving a new phone but i am worried about losing my contacts how can i see if i can retrevive them once i get a new apple devce please someone help me.

Go to icloud.com from your computer and sign into your account. Any iCloud data you see there will sync to your new phone when you sign into your account.
Also, if you have a recent backup of your phone, restore that backup to your new phone when you get it to transfer your data, settings, apps and other purchased media. More details here: http://support.apple.com/kb/ht2109.

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Cm not seeing updated logs

Similar Messages

Maybe you are looking for