CM Register over SIP Trunk
Hi guys,
would it be possible to allow sip users to register over the sip trunk on the Call Manager? or is this method not allowed?
Thanks.
Best regards
Hi Manish,
between sip client and webrtc gw -> ws and between webrtc gw and CM -> sip.
here are the sip messages.
both phones are registered, 9000 is a 7912 and 8080 is sip.
192.168.15.2 - CM
192.168.15.202 - webrtc
SEND: INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.15.202:10060;branch=z9hG4bK-1536671115;rport
From: <sip:[email protected]>;tag=400660433
To: <sip:[email protected]>
Contact: <sip:[email protected]:10060;ws-src-ip=192.168.251.105;ws-src-port=50731;ws-src-proto=ws;transport=udp>
Call-ID: df093113-7c32-2a2f-2372-8af2dfbe9235
CSeq: 1875466830 INVITE
Content-Type: application/sdp
Content-Length: 978
Max-Forwards: 70
Authorization: Digest username="8080",realm="ccmsipline",nonce="gHqGqDWK4zTzv6Ijl6ixW58AK/Gm4yC6",uri="sip:[email protected]",response="352cb2e17e36b32ee4e0d52443d0a106",algorithm=MD5
User-Agent: webrtc2sip Media Server 2.6.0
v=0
o=doubango 1983 678901 IN IP4 192.168.15.202
s=-
c=IN IP4 192.168.15.202
t=0 0
a=tcap:1 RTP/SAVPF RTP/SAVP RTP/AVPF
m=audio 58690 RTP/AVP 8 0 101
c=IN IP4 192.168.15.202
a=ptime:20
a=minptime:1
a=maxptime:255
a=silenceSupp:off - - - -
a=rtpmap:8 PCMA/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpmap:101 telephone-event/8000/1
a=fmtp:101 0-16
a=acap:1 crypto:1 AES_CM_128_HMAC_SHA1_80 inline:1YfBfgbhIdMB6YVtyZgJqc77QPHwm9o42aEPbkHD
a=acap:2 crypto:2 AES_CM_128_HMAC_SHA1_32 inline:fujGVOi70hQnKkeUimcFUw2bH3ajZ2iW0xKy5Nrw
a=pcfg:1 t=1 a=1,2
a=pcfg:2 t=2 a=1,2
a=pcfg:3 t=3
a=sendrecv
a=rtcp-mux
a=ssrc:4034073057 cname:c08c56217e96dbc1e8234373eb5d2fcc
a=ssrc:4034073057 mslabel:6994f7d1-6ce9-4fbd-acfd-84e5131ca2e2
a=ssrc:4034073057 label:doubango@audio
a=ice-ufrag:uaektHZ6KFVn1fw
a=ice-pwd:HAj21nuOrDmIKl3ANXTc3K
a=candidate:tWR5PLw1x 1 udp 2130706431 192.168.15.202 58690 typ host
a=candidate:tWR5PLw1x 2 udp 2130706430 192.168.15.202 58691 typ host
RECV:SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.15.202:10060;branch=z9hG4bK-1536671115;rport
From: <sip:[email protected]>;tag=400660433
To: <sip:[email protected]>
Date: Wed, 19 Mar 2014 13:26:05 GMT
Call-ID: df093113-7c32-2a2f-2372-8af2dfbe9235
CSeq: 1875466830 INVITE
Allow-Events: presence
Content-Length: 0
RECV:SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.15.202:10060;branch=z9hG4bK-1536671115;rport
From: <sip:[email protected]>;tag=400660433
To: <sip:[email protected]>;tag=856401750
Date: Wed, 19 Mar 2014 13:26:05 GMT
Call-ID: df093113-7c32-2a2f-2372-8af2dfbe9235
CSeq: 1875466830 INVITE
Allow-Events: presence
WWW-Authenticate: Digest realm="ccmsipline", nonce="gHqGqDWK4zTzv6Ijl6ixW58AK/Gm4yC6", algorithm=MD5
Content-Length: 0
SEND: ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.15.202:10060;branch=z9hG4bK-1536671115;rport
From: <sip:[email protected]>;tag=400660433
To: <sip:[email protected]>;tag=856401750
Call-ID: df093113-7c32-2a2f-2372-8af2dfbe9235
CSeq: 1875466830 ACK
Content-Length: 0
Max-Forwards: 70
Receiving SIP o/ WebSocket message: ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/WS df7jal23ls0d.invalid;branch=z9hG4bKZEk81zTwfVde8oImts6ZHiTzchfBWh1N;rport
From: "8080"<sip:[email protected]>;tag=XFKqC4zu0S9QfzzMzQ4u
To: <sip:[email protected]>;tag=1464334432
Call-ID: ecc84fa2-3de3-d953-527f-5e7515cabca3
CSeq: 29519 ACK
Content-Length: 0
Route: <sip:192.168.15.2:5060;lr;sipml5-outbound;transport=udp>
Max-Forwards: 70
Thanks.
Similar Messages
-
Third Party Phone over SIP Trunk with CUCM 9.x
Hi all,
I have a problem where my Third Party SIP phones wont go over the SIP trunk configured in my CUCM 9.x cluster. My Cisco phones work fine and goes out the trunk. I have noticed a distinct difference in wireshark with the invite packets from Third Party SIP phones and the Cisco ones.
I have configured the SIP trunk in CUCM with the following route pattern (60.!#)and configured it with associated group and list. Heres the differense between the invite packets from Cisco and Third Party phones.
Cisco Phone: INVITE sip.60xxxx%23@ipadress
Third Party SIP Phone: INVITE sip:[email protected]
It seems the Cisco phones gets some extra configured the Third Party ones dont...
Thanks in advance for any help.
//PerThanks for the answer
Yeah i have DNS configured and i have the trunk pointed to a domain destination SRV record and like i said it works fine when calling from a Cisco phone. I tried changing the domain to an ip address but same result. I also changed the Plycom phone from being registered towards the domain of CUCM to an IP adress of CUCM and then the SIP INVITE messages in wireshark began to look kinda the same expet for the "%23" section but it still dont work.
When i look at the Real Time Data in RTMT the orig and final called from the cisco phone has stripped the 60 and forwared the rest of the number towards the correct domain for the SIP trunk.
When looking at the data from the Polycom phone the orig and final called data still contains the 60 prefix part and the called device name field is empty. The termination Cause Code is that the number requested is Unallocated/Unassigned..
In other words something is missing to get CUCM to strip 60 from the Polycom phones dialed number and send it towards the SIP trunk like it does when the Cisco phones call it.
Unfortunatley i dont have the meens to attach the trace...
Thanks again for any help/advice
With regards, Per. -
SIP phone registering on SIP trunk
Hi,
i have a UC 500 connected to our phone provider using a SIP trunk.
All the phones are SPA508 G
All is working fine !
Then, some days ago i added a SIP phone (extention 350) on the UC500, that also worked fine, and then after some minutes all our incoming/outgoing calls were blocked.
I called my provider that told me that our IP was banned because they have seen to much registration attempt from a bad user that was "350"
I can confirm with a "sh sip-ua register status" command that i had two sip registration : my SIP trunk and the SIP phone
Then it seems that the UC 500 is trying to register the SIP phone on the SIP trunk ?
What am i doing wrong ?
Is there a command to avoid that ?
Bellow is how the SIP phone and the SIP trunk are configured
Many thanks for your help, i was unable to find anything about that, but i guess somebody already had this problem !
The SIP phone -------------------------------------------------------------------------
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol none
modem passthrough nse codec g711ulaw
sip
registrar server expires max 3600 min 120
no update-callerid
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
voice register global
mode cme
source-address 10.1.1.1 port 5060
max-dn 20
max-pool 20
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
load 7971 term71.default
authenticate register
authenticate realm xxxxxx.com
timezone 13
hold-alert
mwi stutter
mwi reg-e164
create profile sync 0636240803635305
voice register dn 1
number 350
name Conference
label Conference
voice register pool 1
id mac 1234.1234.1234
number 1 dn 1
username 350 password 1234
codec g711ulaw
The SIP trunk ----------------------------------------------------------------------
sip-ua
credentials username user1234 password 1234 realm sipgw9.provider.com
authentication username user1234 password 1234 no remote-party-id
retry invite 2
retry register 10
timers connect 100
registrar dns:sipgw9.provider.com expires 3600
sip-server dns:sipgw9.provider.comI'm still searching on the forum, and maybe i found somthing related to my problem, not sure... any advice ?
Disable outbound proxy on voice register global as by default it will use the outbound proxy configured on the system which would not make sense
voice register global
no outbound-proxy
found there : https://supportforums.cisco.com/discussion/10760741/uc500-sip-server-and-sip-trunk -
NICE recorder - one way or garbled audio over SIP trunk.
Customer with CUCM 10.5.2 trying to integrate with a NICE recording solution. Everything configured per NICE documentation and rechecked that several times with the NICE vendor. However, if calling to/from the PSTN or legacy Nortel PBX to a Cisco 78xx or IP Communicator soft phone - we get one-way audio pushed out the SIP trunk to the NICE system. If it's a Cisco to Cisco phone call - the audio is garbled.
Has anyone experienced this issue with this type of integration - or the same issue with a SIP trunk to the CUCM to another system at all? We're at a loss here.
Thank you.This document should help you:
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml -
Unity Connection not passing CallerID to CUCM over SIP Trunk
I'm trying to get CallerID working for Unity Connection Device Notification (and it seems everything else), however, when I run UC Remote Port Status Monitor and the Call-Out goes to CUCM for the Device Notification, no caller ID is presented to the CUCM SIP trunk.
06:06:02, New Call, CalledId=, RedirectingId=, Origin=16, Reason=1024, CallGuid=,
CallerName=, LastRedirectingId=, LastRedirectingReason=1024, PortDisplayName=LFC_CUCM-1-134,
[Origin=Unknown],[Reason=Unknown]
06:06:02,
Dialing '99254753'
06:06:32, Idle
06:06:33, Idle
Therefore, the out-going call to the PRI PSTN is:
10:59:01.005: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x5B03
Sending Complete
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98397
Exclusive, Channel 23
Calling Party Number i = 0x0081, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0xC1, '9254753'
Plan:ISDN, Type:Subscriber(local)
*Dec 6 10:59:01.513: ISDN Se0/0/0:23 Q931: RX <- CALL_PR
I've looked through my SIP trunk on the CUCM side and for Inbound Calls, Connected Line ID and Presentation Name are set to "allowed" or "default" doesn't make a difference. RTMT Port Status also shows no "caller", so I'm thinking there is some way to set or allow the calling number on the Unity Connection (8.5) side.
Oddly enough, I also noticed that in Unity Connection> Telephony Integrations > Port Group, if I change the Contact Line Name from nothing to "Unity" (or whatever), the Q931 debug outbound doesn't show ANY "Calling Party Numer - = XXXXX" and the carrier throws out the BTN as the ANI.
10:46:00.837: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x5AFF
Sending Complete
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98397
Exclusive, Channel 23
Called Party Number i = 0xC1, '9254753'
Plan:ISDN, Type:Subscriber(local)
Any ideas on where/how CallerID comes from, on Unity Connection with a SIP integration?
THANKS!!
Mike.I did not- my work around has been to put in a name for Contact Line Name under Port Group Basics Switch configuration in Unity Connection- this for some reason keeps CUCM from sending ANI TYPE/PLAN information in the Q931 message, and my carrier then sends a default ANI of the circuit's BTN. When I have time, I'll open up a TAC ticket.
Mike. -
Route SIP REFER to SIP Trunk based on DN
Cisco UCM 9 is connected to a third-party PBX over SIP Trunk. Third-party PBX sends a SIP REFER message to Cisco UCM to call a DN on the third-party PBX. Cisco UCM responds with SIP 404 Not Found as it does not recognize the DN of the third-party PBX.
How do I configure Cisco Unified Communication Manager 9 to route this call back out over the SIP Trunk to the third-party PBX based on the DN (Not IP)?
Cisco UCM contains a route pattern 53xxx to route to SIP_Trunk_3rdParty.
Third-party PBX contains a SIP Proxy and Call Server. The call should route to the SIP Proxy IP. The SIP REFER contains "Refer-To" 53xxx@ThirdPartyCallServerIP
I added a SIP Route Pattern on CUCM to route calls for ThirdPartyCallServerIP to SIP_Trunk_3rdParty. This works in routing the call to ThirdPartyCallServerIP, however I need the call to route to 53xxx@ThirdPartySIPproxyIP for it to be successful.
Direct calls from CUCM to ThirdParty PBX 53XXX@ThirdPartySIPproxyIP are successful. SIP REFER coming into CUCM to request CUCM to call ThirdParty fail.
Any ideas on what configuration on CUCM I could try to get CUCM to route the call to thrid-party based on the SIP REFER?Thanks for the reply Vivek.
Partitions:
- ThirdPartyPBX
- CiscoEndpoints
Calling Search Space: "ThirdParty_Cisco" contain both of the above partitions.
Route Pattern 531XX and 80965 are assigned to Route Partition "ThirdPartyPBX"
Cisco UCM Main site phones are in CSS "ThirdParty_Cisco" and DN is in Route Partition "CiscoEndpoints". DN is in CSS "ThirdParty_Cisco".
Trunk "SIP_Trunk_3rdParty" - Inbound and Outbound Calls are in CSS "ThirdParty_Cisco".
Trunk SIP information has "Rerouting CSS", "Out-of-Dialog Refer CSS", and Subscribe CSS as "ThirdParty_Cisco".
Cisco continues to respond to with SIP 404 not found. CUCM does not seem to match the SIP refer to the CSS or Route partition with with 531XX route pattern.
The SIP Refer is coming from DN 80965 over the SIP Trunk from the Third-party PBX.
Perhaps I'm missing something in my CSS config?
Any other method for CUCM to match SIP Refer to a Route Pattern? -
Hi!
I'm trying to register a SIP Trunk to a SIP server. The trunk registration is done, but not keep alive. The trunk register with SIP server when an outgoing call starts, but when this call ends, the SIP trunk closes the connection with SIP server. Then, the
outgoing calls work OK, but the incoming calls doesn't work because the SIP Trunk is unregistered while no active outgoing calls.
Then, can i keep alive the SIP Trunk registration with SIP Server?
Thanks!!!You need to talk to the SIP provider and get them enable OPTIONS on the SIP Trunk and enable OPTIONS on the PSTN Gateway. Check the registration interval of the SIP trunk on the Gateway and try increasing it to a higher value.
http://thamaraw.com -
Hi
We are migrating from Analogue to IP Telephony. I have recieved the following guidlines to configure the SIP Trunk:
*For signaling: use IP : x.x.211.70 ( SIP ) on PORT 5060
*Regarding Numbering Format, use the following:
• For outgoing Calls :
The originating Number (A#), should be 96611510XXXX format.
The Destination Number should be 0NXXXXXX (N area code) or 00XXXXXXXXX (for international)
• For incoming Calls:
The Destination Number (B#), should 011510XXXX Format.
The originating Number (A#), will be 0NXXXXXXX or 00XXXXXXXXXXX Format
*Use Audio Codec's G711-aLaw ; G711-uLaw & G729
*Use T.38 For FAX
*set DTMF to RFC2833
*Make sure to reply with 200Ok for our OPTIONS messages ( ping messages for the SIP)
* configure the following SIP Timers: “Min-SE=1800 “’ & “Expires=300”
For connectivity consider the following:
SIP CE: 10.65.13.110 (it might be needed to translate this IP to the PBX local IP).
SIP GW: 10.65.13.109
Subnet mask: /30
SIP VLAN: 1191
Notes:
Kindly make sure to have GO SIP GW (x.x.211.70) routed to SIP GW (10.65.13.109) as next-hop.
Kindly make sure to have SIP CE IP addresses are in VLAN 1191.
Can please anyone explain what have to done?
RegardsAhmed,
Wao..Where do I start...This information is required for configuration on your CUBE..which will be your 2921 router...
Ahmed, here are some pointers I wrote a while ago..
In addition to these points, you will need to configure your cube to be able to route traffic to your ITSP using all the information given to you
1. Configure CUBE for media flow through. In this Mode CUBE acts as a true B2BUA. Advantages you get include address hiding and security becaue CUBE terminates and re-originate both signalling and Media. In this mode CUBE becomes a point of demarcation from th external world.
2. Configure CUCM to use Delayed Offer and CUBE to convert delayed offer to ealry offer...This prevents the need for you to use MTP to send Early offer on CUCM
voice service voip
early-offer forced
3. Configure DTMF signalling method on sip trunk to "No preference" This setting allows Unified CM to make an optimal decision for DTMF and to minimize MTP allocation.
4. Configure your CUBE to meet the requirements of your ITSP. Ask if they have configuration templates or any specific configuration they like you to use. This will save you time troubleshooting. Most of them dont use the default port 5060 because of security, confirm with your proivider what ports they use.
voice service voip
allow-connections sip to sip
sip
early-offer forced
header-passing
error-passthru
5. Use SIP to SIP...Use end to end sip. CUCM---sip---CUBE--sip----ITSP
6. Create a Trusted list of IP addresses on your CUBE is your CUBE IOS is 15.1 .2(T) and above.
voice service voip
ip address trusted list
ipv4 203.0.113.100 255.255.255.255
ipv4 192.0.2.0 255.255.255.0
This is imprtant because sometimes your ITSP will send you a single ip address for signalling and will then send media on a different IP adress. So get all the IP address your ITSP is using and add them to the trust list as shown above
7. Configure your inbound and outbound dial-peer approriately
Inbound Dial-Peer for calls from CUCM to CUBE (CUCM sending 9 +all digits dialled to CUBE)
dial-peer voice 100 voip
description *** Inbound LAN side dial-peer ***
incoming called-number 9T
session protocol sipv2
codec g711ulaw
dtmf-relay rtp-nte
Outbound Dial-Peer for calls from CUBE to CUCM (SP will be sending 10 digits inbound)
dial-peer voice 200 voip
description *** Outbound LAN side dial-peer ***
destination-pattern [2-9].........
session protocol sipv2
session target ipv4:
codec g711ulaw
dtmf-relay rtp-nte
Note: If more than 1 CUCM cluster exists, you will have to create multiple such LAN dial-peers with “preference CLI” for CUCM redundancy/load balancing
Inbound Dial-Peer for calls from SP to CUBE
dial-peer voice 100 voip
description *** Inbound WAN side dial-peer ***------------------(catch-all for all inbound PSTN calls)
incoming called-number [2-9].........
session protocol sipv2
codec g711ulaw
dtmf-relay rtp-nte
Outbound Dial-Peer for calls from CUBE to SP
dial-peer voice 200 voip
description *** Outbound WAN side dial-peer ***
translation-profile outgoing Digitstrip
destination-pattern 9[2-9].........
session protocol sipv2
voice-class sip bind control source gig0/1
voice-class sip bind media source gig0/1
session target ipv4::XXXX (where XXXX is the port number your provider is using if different from 5060)
codec g711ulaw
dtmf-relay rtp-nte
8. SIP Normalization:
You may need to configure sip normnalization to modify sip headers, CLI etc. A good example is during call forwarding. You may need to change your diversion headers to match the CLI your provider is expecting.. if your call forwarding is failing during testing this may be the reason..We can help you with this.
9. Media Resources
Plan your solution properly. Consider if you will need Xcoders, MTP, Conference bridge etc. You may avoid the need for xcoders if you confure your regions properly and use voice class codecs on your sip profiles. It is important to know if there are any endpoints in your network that do not support dtmf relay rtp-nte. You can avoid the use of MTP if you configure your dial-peers to have multiple dtmf types for thos phones that do not support rtp-nte
e.g
dial-peer voice 1 voip
session protocol sipv2
dtmf-relay rtp-nte digit-drop sip-kpml (if your phones support kpml..then this will be used)
If in your environment you will need to do xcoding or CFB then ensure you have PVDMS
.10.FAX
If you have FAX in your network, determine what fax protocol your sip provider supports. Dont assume. Ask them and confirm in writing what they support. I have seen legal cases because of fax failures over sip trunks
Configure your FAX devices in seperate device pools and use porefix to route calls using G711 only. Even if you are using T38, ensure your fax use G711 to establish the voice calls
Finally
11. Have a detailed and carefully planned TEST Plan. Test the FF:
Inbound and outbound Local, Long distance, International calls for G711 & G729 codecs (if supported by provider)
Outbound calls to information and emergency services
Caller ID and Calling Name Presentation
Supplementary services like Call Hold, Resume, Call Forward & Transfer
DTMF Tests
Fax calls – T.38, modem pass-through--whichever one you decide to use
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared" -
Why we dont' see H323 gateway and SIP trunk "registered" in CCM?
in CCM admin, we see the status of H323 gateways and SIP trunks have no "registered to xxxx" status.
Unlike devices with other protocols, there is no registration mechanism for these.
-
Controlling which CUCM server communicate over a SIP trunk
We have 3 CUCM servers, two sub and one pub at two different physical locations.
There are two SIP trunk servers (non Cisco), we wish to have the CUCM at the same physical location to communicate with the SIP trunk device at its location, instead of going over the WAN to communicate with the other one.
Communications are initiated from the CUCM side through a route pattern that points to a RL/RG that contains the SIP trunk.
The SIP trunk uses a DP that uses a CUCM group that only contains the local CUCM server.
Can this be setup to reliably control which CUCM server talks to the SIP trunk server at its location?
Do we need to configure something differently?Hi,
If the CUCM's are located in different physical location then the communication should be over the IP-WAN and if it is about different CUCM Cluster then we can use H323 ICT Trunk between CUCM server for communication which is again WANLink.
Still not clear with your query, However as you want to control the Gwy/Trunks using the Route Pattern. You can create two separate route pattern for internal & external.
Wherein in Internal Route Pattern you can specify the ICT/SipTrunk/GWY which is connected within the cluster under Route List/RouteGroup to route the call.
And for External Route Pattern specify the Gwy/SipTrunk which connects you to the outside world.
Regards,
Venkatesh -
PMF to allow outgoing calls through SIP Trunk Without Registering
Hello,
I have an intermitant issue with one of our UC320W's running 2.3.2(6) firmware. The customers VOIP SIP trunk becomes unregistered for periods of time, stopping incoming and outgoing calls. Once unregistered it takes quite a while to rergister. Our service provider has informed us that the re-register period is the cause and we should try and shorten it, so first question is there a way to do this, also what is the re-register retry window in the first place?
I have an analogue line that can receive calls only so I have made this the fallover number with the VOIP provider, that gives a little releife for incoming calls, but not outgoing. I beleive in other phone systems a SIP trunk does not need to be registered to make an outgoing call, and it is usually an option to say only make outgoing calls if the SIP trunk is registered. I cannot find that option anywhere to deselect it, is there a PMF I could apply to allow outgoing calls without registering?
Thank you,
TonyHi Tony,
Please install the SIP_Trunk_Register_Timer.pmf at status->Devices->Alter PMFs in configure utility. Please remember to apply the configuration afterwards. This PMF can let user to select the re-register period. You can find the PMF at https://supportforums.cisco.com/docs/DOC-16301
Regards,
Wendy Yang -
Register TANDBERG MXP 6000 over SIP
Hi, i have MXP6000 with 9.1 software. Cant make it register with SIP. No single packet comes from MXP to server.
Has anyone been able to make it register with SIP server?
Config is quite simple:
xConfiguration Conference SIP URI: "[email protected]"
*c xConfiguration SIP Mode: On
*c xConfiguration SIP Server Discovery: Manual
*c xConfiguration SIP Server Address: "10.96.37.10"
*c xConfiguration SIP Server Type: Auto
*c xConfiguration SIP Authentication UserName: "6000"
*c xConfiguration SIP Transport Default: UDP
*c xConfiguration SIP TLS Verify: Off
*c xConfiguration SIP ICE Mode: Off
*c xConfiguration SIP MNS Mode: Off
*c xConfiguration SIP ForceTurn Mode: Off
*c xConfiguration SIP DefaultCandidate Type: Host
*c xConfiguration SIP Legacy Mask: ""
*c xConfiguration SIP ReplyTo URI: ""Does it matter? NO REGISTER packets arrived to server, i was sniffing traffic.
Problem solved just after i entered valid DNS server address in IP parameters. Why would it need DNS if i'm using direct IP addresses...
Anyways, my SIP server (Asterisk) does not support duo-video and because there is two video streams in SDP message, it choses wrong RTP port and streams other's side video to presentation channel. -
Changing external Caller ID over a SIP Trunk to SIP Provider
I am working with a client and when they place calls out to any external user they have the wrong name showing on the external caller ID.
I have spoken with the SIP provider and apparently they want us to pass the CNAM, or rather they have it setup for us to do this.
I opened a case with Cisco and the TAC engineer said the provider has to do this because it cannot be done from CUCM or the gateway.
For example, it says right now "location A" for external calls and I want to change this to say "location B" .
Is this even possible?what is the call flow? did you check the caller name in SIP trunk configuration?
-
NexVortex SIP trunk and UC500 default timeout settings?
Hey guys,
I'm doing a little SIP trunk testing to determine a good provider for my customer base, and had some general questions as I can't seem to get outgoing or incoming phone calls to work at all.
To keep things simple, I'm using an 8user UC540W with 3 IP phones - a 525G, a 524G, and a 7937 conference phone. I have a static IP on the UC540, have run through the telephony wizard and everything seems to be working on the LAN/PBX side of things. The big difference, and the major variable that we are working with (I believe), is that we're working with Satellite internet connectivity rather than terrestrial Internet connectivity. This is an Enterprise satellite connection, and we have run voice over the connection without problems, but this is our first attempts at SIP trunking from a UC500. Due to the latency involved inherent in satellite (ping times around 550-700ms), I believe that either UC540 or NexVortex server/switch is timing out. Is there any way to determine what the default setting is for a SIP acknowledgement on the UC540 and change this if it is too small?
Here is what I have found, if it is helpful:
Outgoing calls:
1. The SIP provider, NexVortex, says that they are seeing an invite from the UC540, but not on port 5060. On the two calls that we tested, it first saw an invite on 63452, and then on 51677. Is there any reason why this would not be sent out on 5060?
Incomign calls:
1. On incoming calls, Nexvortex is routing the calls to the proper IP, but is then receiving an "error 500 reason Q850" from the UC540. What does this error mean?
I am also attaching my config in the event that it helps. When I look at the SIP trunk status in CCA, it does not show that registration is working, so I assume that's a good place to start.
Lastly, the guys over at NexVortex don't seem to run across the UC500 very often. If anybody has setup their UC500 to work with NexVortex and wouldn't mind posting a screenshot from CCA (feel free to remove usernames and passwords), I'd appreciate it. I'm not certain that I have all of the information in the right places.
Thanks,
SethHi Steven,
Thanks for the continued help.
I was able to make the changes in the config. Here are snapshots from the current config:
dial-peer voice 1000 voip
description ** Incoming call from SIP trunk (Generic SIP Trunk Provider) **
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
incoming called-number .%
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 3000 voip
description IncomingSIP
translation-profile incoming IncomingSIP_Called_4
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
incoming called-number 14068906254$
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 3001 voip
description IncomingSIP2
translation-profile incoming IncomingSIP2_Called_5
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
incoming called-number 1406890624[2-3]$
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 3002 voip
incoming called-number 14068906254$
no dial-peer outbound status-check pots
sip-ua
authentication username nomadgcs password 7 *removed*
no remote-party-id
retry invite 2
retry register 10
timers connect 100
registrar ipv4:66.23.129.253:5060 expires 3600
sip-server ipv4:66.23.129.253:5060
connection-reuse
host-registrar
We are calling from within the 406 area code, so when we dial the number with the leading 406, we get a message saying "You don't need the area code" from the telephone company. When we dial this from a cell, we get the following:
1. 4068906254 - "All circuits are busy, please try your call again..."
2. 8906254 - rings once, then no sound, then disconnects after about 10 seconds.
I don't know if this would factor in at all, but our NexVortex account is setup to deliver 14068906254 to the UC500, but would NexVortex deliver the entire string of characters if it is only receiving 4068906254 or 8906254?
Thanks,
Seth -
SIP Trunk - No voice with Single Number Reach
Hi Community.
I setup SIP Trunk with the CCA. Everything is working Call In and Call Out. Call Forward and so on.
But with Single Number reach is something wrong. The mobile phone is ringing and I can get the call, but I hear not any voice.
Can someone please help me out? Below the config.
version 15.1
parser config cache interface
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
service compress-config
service sequence-numbers
dot11 ssid cisco-data
vlan 1
authentication open
dot11 ssid cisco-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.9
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip domain name site1.365873.trk.ipvoip.ch
ip name-server 8.8.8.8
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp router-traffic
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
isdn switch-type basic-net3
voice call send-alert
voice rtp send-recv
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip refer
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
sip
registrar server expires max 3600 min 3600
localhost dns:site1.365873.trk.ipvoip.ch
no update-callerid
voice class codec 1
codec preference 1 g711alaw
voice register global
mode cme
source-address 10.1.1.1 port 5060
load 9971 sip9971.9-2-2
load 9951 sip9951.9-2-2
load 8961 sip8961.9-2-2
timezone 23
voice source-group CCA_SIP_SOURCE_GROUP_CUE_CME
access-list 2
translation-profile incoming SIP_Incoming
voice source-group CCA_SIP_SOURCE_GROUP_EXTERNAL
access-list 3
voice translation-rule 9
rule 1 /0041449475090/ /90/
rule 2 /0041449475091/ /91/
rule 3 /0041449475092/ /92/
rule 4 /0041449475093/ /93/
rule 5 /0041449475094/ /94/
rule 6 /0041449475095/ /95/
rule 7 /0041449475096/ /96/
rule 8 /0041449475097/ /97/
rule 9 /0041449475098/ /98/
rule 10 /0041449475099/ /99/
voice translation-rule 410
rule 1 /^0\(.*\)/ /\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 411
rule 1 /^0\(.*\)/ /ABCD0\1/
voice translation-rule 412
rule 1 /^ABCD\(.*\)/ /\1/
voice translation-rule 422
rule 15 /^ABCD\(.*\)/ /\1/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1111
rule 1 /^9\([1-9]\)$/ /004144947509\1/
rule 15 /^..$/ /0041449475090/
voice translation-rule 1112
rule 1 /^0/ //
voice translation-rule 2000
rule 1 /0041449475098/ /98/
voice translation-rule 2001
rule 1 /0041449475097/ /97/
voice translation-rule 2002
rule 1 /^6/ //
voice translation-rule 2222
voice translation-profile AA_Profile
translate called 2001
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PSTN_CallForwarding
translate redirect-target 410
translate redirect-called 410
voice translation-profile PSTN_Outgoing
translate calling 1111
translate called 1112
translate redirect-target 410
translate redirect-called 410
voice translation-profile SIP_Called_9
translate calling 3265
translate called 9
voice translation-profile SIP_Incoming
translate called 411
voice translation-profile SIP_Passthrough
translate called 412
voice translation-profile SIP_Passthrough_CallBlocking
translate called 422
voice translation-profile VM_Profile
translate called 2000
voice translation-profile XFER_TO_VM_PROFILE
translate redirect-called 2002
voice translation-profile nondialable
translate called 1000
voice-card 0
dspfarm
dsp services dspfarm
fax interface-type fax-mail
license udi pid UC540W-BRI-K9 sn FGL163220SL
archive
log config
logging enable
logging size 600
hidekeys
username admin privilege 15 secret xxx
username xxx password 0 ""
username xxx password 0 ""
ip tftp source-interface Loopback0
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $FW_OUTSIDE$
no ip address
ip inspect SDM_LOW out
ip virtual-reassembly in
ip verify unicast reverse-path
load-interval 30
shutdown
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
no ip address
macro description cisco-desktop
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
no ip address
macro description cisco-desktop
spanning-tree portfast
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface BRI0/1/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn static-tei 0
interface Dot11Radio0/5/0
no ip address
ssid cisco-data
ssid cisco-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
antenna receive right
antenna transmit right
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface BVI1
description $FW_INSIDE$
ip address 192.168.10.2 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly in
interface BVI100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip dns server
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 2 remark CCA_SIP_SOURCE_GROUP_ACL_INTERNAL
access-list 2 remark SDM_ACL Category=1
access-list 2 permit 192.168.10.2
access-list 2 permit 10.1.10.0 0.0.0.3
access-list 2 permit 192.168.10.0 0.0.0.255
access-list 2 permit 10.1.1.0 0.0.0.255
access-list 3 remark CCA_SIP_SOURCE_GROUP_ACL_EXTERNAL
access-list 3 remark SDM_ACL Category=1
access-list 3 permit 212.147.47.216
access-list 3 deny any
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip 192.168.10.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny ip 10.1.1.0 0.0.0.255 any
access-list 101 deny ip 192.168.10.0 0.0.0.255 any
access-list 101 deny ip 192.168.1.0 0.0.0.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 deny ip 10.1.10.0 0.0.0.3 any
access-list 102 deny ip 10.1.1.0 0.0.0.255 any
access-list 102 deny ip 192.168.1.0 0.0.0.255 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 103 remark SDM_ACL Category=1
access-list 103 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 deny ip 10.1.10.0 0.0.0.3 any
access-list 103 deny ip 192.168.10.0 0.0.0.255 any
access-list 103 deny ip 192.168.1.0 0.0.0.255 any
access-list 103 deny ip host 255.255.255.255 any
access-list 103 deny ip 127.0.0.0 0.255.255.255 any
access-list 103 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 104 remark SDM_ACL Category=1
access-list 104 deny ip 10.1.10.0 0.0.0.3 any
access-list 104 deny ip 10.1.1.0 0.0.0.255 any
access-list 104 permit ip any any
access-list 104 permit udp host 8.8.8.8 eq domain any
access-list 104 permit icmp any any echo-reply
access-list 104 permit icmp any any time-exceeded
access-list 104 permit icmp any any unreachable
access-list 104 deny ip 10.0.0.0 0.255.255.255 any
access-list 104 deny ip 172.16.0.0 0.15.255.255 any
access-list 104 deny ip 192.168.0.0 0.0.255.255 any
access-list 104 deny ip 127.0.0.0 0.255.255.255 any
access-list 104 deny ip host 255.255.255.255 any
access-list 104 deny ip host 0.0.0.0 any
access-list 104 deny ip any any
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
cptone CH
station-id name FAX
station-id number 99
caller-id enable
voice-port 0/0/1
cptone CH
shutdown
caller-id enable
voice-port 0/0/2
cptone CH
shutdown
caller-id enable
voice-port 0/0/3
cptone CH
shutdown
caller-id enable
voice-port 0/1/0
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/1/1
compand-type a-law
cptone CH
bearer-cap Speech
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register mtpa4934c6ee4e0
dspfarm profile 2 transcode
description CCA transcoding for SIP Trunk VTX
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 10
associate application SCCP
dial-peer cor custom
name internal
name local
name local-plus
name international
name national
name national-plus
name emergency
name toll-free
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-local-plus
member local-plus
dial-peer cor list call-national
member national
dial-peer cor list call-national-plus
member national-plus
dial-peer cor list call-international
member international
dial-peer cor list call-emergency
member emergency
dial-peer cor list call-toll-free
member toll-free
dial-peer cor list user-internal
member internal
member emergency
dial-peer cor list user-local
member internal
member local
member emergency
member toll-free
dial-peer cor list user-local-plus
member internal
member local
member local-plus
member emergency
member toll-free
dial-peer cor list user-national
member internal
member local
member local-plus
member national
member emergency
member toll-free
dial-peer cor list user-national-plus
member internal
member local
member local-plus
member national
member national-plus
member emergency
member toll-free
dial-peer cor list user-international
member internal
member local
member local-plus
member international
member national
member national-plus
member emergency
member toll-free
dial-peer voice 1 pots
destination-pattern 99
port 0/0/0
no sip-register
dial-peer voice 2 pots
port 0/0/1
no sip-register
dial-peer voice 3 pots
port 0/0/2
no sip-register
dial-peer voice 4 pots
port 0/0/3
no sip-register
dial-peer voice 5 pots
description ** MOH Port **
destination-pattern ABC
port 0/4/0
no sip-register
dial-peer voice 6 pots
description tcatch all dial peer for BRI/PRIv
translation-profile incoming nondialable
incoming called-number .%
direct-inward-dial
dial-peer voice 50 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/0
dial-peer voice 51 pots
description ** incoming dial peer **
incoming called-number ^AAAA$
direct-inward-dial
port 0/1/1
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
translation-profile outgoing XFER_TO_VM_PROFILE
destination-pattern 98
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 97
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 96
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1000 voip
permission term
description ** Incoming call from SIP trunk (VTX) **
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1001 voip
corlist outgoing call-local
description ** star code to SIP trunk (VTX) **
destination-pattern *..
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
fax rate 14400
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback pass-through g711ulaw
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1003 voip
description ** Passthrough Inbound Calls for PSTN from CUE **
translation-profile incoming SIP_Passthrough
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ABCDT
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1005 voip
description ** Passthrough Inbound Calls for MWI from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number A80T
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1009 voip
description ** Passthrough Inbound Calls for Internal Extensions from CUE **
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
incoming called-number ^..$
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1033 voip
corlist outgoing call-local
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0187
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1042 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1041 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1025 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[789]1.......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1020 voip
corlist outgoing call-national
description **CCA*Switzerland*Regional Announcement VM**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01600
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1040 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 000333333333
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1043 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Ambulance / Poisioning**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 014[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1035 voip
corlist outgoing call-national
description **CCA*Switzerland*Mobile Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 007[46789].......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1024 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Personal Numbering**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00878......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1029 voip
corlist outgoing call-national
description **CCA*Switzerland*Voicemail Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00860.........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1036 voip
corlist outgoing call-national
description **CCA*Switzerland*VPN Access**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00869.............
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1027 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Premium Rate (Business)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00900......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1026 voip
corlist outgoing call-national
description **CCA*Switzerland*Test Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00868T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1034 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Shared Cost numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0084[0248]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1038 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1037 voip
corlist outgoing call-toll-free
description **CCA*Switzerland*Toll Free Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00800......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1039 voip
corlist outgoing call-emergency
description **CCA*Switzerland*Emergency**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 011[278]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1032 voip
corlist outgoing call-national
description **CCA*Switzerland*National Destination Numbers**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 00[23456]........
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1023 voip
corlist outgoing call-international
description **CCA*Switzerland*International Calls**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 000T
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1031 voip
description **CCA*Switzerland*Premium Rate (Social)**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 0090[16]......
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1030 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 014[0357]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1045 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 0141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1028 voip
corlist outgoing call-national-plus
description **CCA*Switzerland*Directory Enquiries**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 018[15].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1021 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 011[45].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1022 voip
corlist outgoing call-national
description **CCA*Switzerland*Short Code Services**
translation-profile outgoing PSTN_Outgoing
preference 1
destination-pattern 01[67].
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 1044 voip
corlist outgoing call-emergency
description **CCA*Switzerland*REGA/Glaciers Air Rescue**
translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE
preference 1
destination-pattern 00141[45]
session protocol sipv2
session target sip-server
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
dial-peer voice 2002 voip
description ** cue voicemail PSTN number **
translation-profile outgoing VM_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2003 voip
description ** cue auto attendant PSTN number **
translation-profile outgoing AA_Profile
destination-pattern xxx$
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 1110 pots
preference 9
destination-pattern xxx
port 0/0/0
no sip-register
dial-peer voice 3006 voip
description SIP
translation-profile incoming SIP_Called_9
session protocol sipv2
session target sip-server
incoming called-number xxx.
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
ip qos dscp cs5 media
ip qos dscp cs4 signaling
no vad
no dial-peer outbound status-check pots
sip-ua
keepalive target dns:site1.365873.trk.ipvoip.ch
authentication username xxx password 7 xxx
no remote-party-id
retry invite 2
retry register 10
timers connect 100
timers keepalive active 100
registrar dns:site1.365873.trk.ipvoip.ch expires 3600
sip-server dns:site1.365873.trk.ipvoip.ch
host-registrar
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 10
sdspfarm tag 2 mtpa4934c6ee4e0
video
fxo hook-flash
max-ephones 40
max-dn 300
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service phone ehookEnable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message SwissT.Net
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 521G-524G cp524g-8-1-17
load 525G spa525g-7-5-4
load 501G spa50x-30x-7-5-2b
load 502G spa50x-30x-7-5-2b
load 504G spa50x-30x-7-5-2b
load 508G spa50x-30x-7-5-2b
load 509G spa50x-30x-7-5-2b
load 525G2 spa525g-7-5-4
load 301 spa50x-30x-7-5-2b
load 303 spa50x-30x-7-5-2b
time-zone 23
time-format 24
date-format dd-mm-yy
keepalive 30 auxiliary 4
voicemail 98
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 xxx
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-template 1
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
service phone webAccess 0
softkeys remote-in-use Newcall
softkeys idle Redial Pickup Mobility Newcall Cfwdall Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Trnsfer Mobility TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 15
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-template 16
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 17
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
ephone-template 18
url services 1 http://10.1.10.1/voiceview/common/login.do VoiceviewExpress
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Mobility Cfwdall Pickup Gpickup Dnd Login
softkeys seized Cfwdall Endcall Redial Pickup Gpickup Callback
softkeys connected Hold Endcall Mobility Trnsfer TrnsfVM Confrn Acct Park
button-layout 7931 2
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 292
number xxx
description SIP Main Number registration
preference 10
ephone-dn 293 dual-line
number 90 secondary xxx no-reg both
label Zentrale
description 90
name Zentrale
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 294 dual-line
number 94 secondary xxx no-reg both
label LL
description Lehrling Lehrnende
name Lehrling Lehrnende
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 295 dual-line
number 93 secondary xxx no-reg both
label CM
description
name
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 296 dual-line
number 92 secondary xxx no-reg both
label EE
description
name
mobility
call-forward busy 98
call-forward noan 98 timeout 20
ephone-dn 297 dual-line
number 91 secondary xxx no-reg both
label RS
description
name
mobility
snr xxx delay 1 timeout 30 cfwd-noan 98
snr ring-stop
call-forward busy 98
call-forward noan 98 timeout 10
ephone-dn 298
number 6.. no-reg primary
description ***CCA XFER TO VM EXTENSION***
call-forward all 98
ephone-dn 299
number A801.. no-reg primary
mwi off
ephone-dn 300
number A800.. no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address A44C.11A0.B648
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:296 2:293 3m297 4m295
button 5m294
ephone 2
device-security-mode none
mac-address A44C.11A0.B566
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:297 2:293 3m296 4m295
button 5m294
ephone 3
device-security-mode none
mac-address A44C.11A0.B5C4
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:295 2:293 3m297 4m296
button 5m294
ephone 4
device-security-mode none
mac-address A44C.11A0.B67A
ephone-template 1
max-calls-per-button 2
username "xxx" password xxx
type 525G2
button 1:294 2:293 3m297 4m296
button 5m295
alias exec cca_voice_mode PBX
alias exec cca_vm_notification schedule from_time=00 to_time=24
alias exec clid-ALL_BRI ;1:0-4;1:0-9;1:0-9;1:1-9
alias exec clid-SIP ;1:1-9;1:1-9;1:1-9
banner login ^CCisco Configuration Assistant. Version: 3.2 (3). Fri Jul 04 13:18:33 CEST 2014^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport preferred none
transport input all
line vty 5 100
transport preferred none
transport input all
ntp master
ntp server 91.240.0.5 prefer
enHi Patrick
I am working on this one as well. I have a UC560 with SIP Trunk provider Les.NET.
It was working fine until a few weeks ago when something changed on the provider end and broke it. My hunch it is something to do with the SIP REFER.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/91535-cme-sip-trunking-config.html
Here is an excerpt from the above page:
Call Transfer
When a call comes in on an SIP trunk to an SCCP Phone or CUE AutoAttendant (AA) and is transferred, the CME by default will send a SIP REFER message to the SP proxy. Most SP Proxy Servers do not support the REFER method. This needs to be configured in order to force the CME to hairpin the call:
Router(config)#voice service voip
Router(conf-voi-serv)#no supplementary-service sip refer
Figure 3 shows the behavior of the CME system with the REFER method disabled.
Maybe you are looking for
-
How can I copy all the info from a contact card in address book to paste into a documnent?
How can I copy all the info from a contact card in address book to paste into a documnent?
-
Hierarchy problems in cross tab
Hello, we are using DS 1.3 and I have a query which want to use with several views. I configured the initial view like the screen shot shows. The problem is, if I assign this data source to a cross tab, no data is available for this component. But th
-
N73 how to make the camera MUTE (no click sound)??...
I want to know how to make the camera without any sound during taking the picture in NOKIA N73 music edition. please tell me as soon as possible Thank u
-
Acceptance at origin-mvt types-107 and 109
Hi experts, In which scenario we should use movement types 107 and 109. what is acceptance at origin. we need to do any configuration for this purpose. advance thanks fro help. regards, dayanand
-
Problem with "Show Format" bar in Mail
The bold, italic, and underline buttons are not working on my "Show Format" bar in Mail. NOTHING will make them work: clicking on a button before I type: selecting/highlighting and then clicking on a button after I type; choosing command+I, command+B