CM repository / BEx Web / document administration

Hi,
I'm testing right now documents funtionality (it's configured with CM repository). We can create comments from the context menu for BEx Web query results elements, however I cannot see any option for removing existing comments/documents or replacing them.. Can you help me finding this funtionality or document administration must be done only from KM content view?
Thank you and kind regards,
K

Hi Lorcan,
Thank you for your message.
I think Service-ACL Service is activated (by default), svc_acl (acl_jdbc_service) is in use.
Being on the query results view I can create comments, but I cannot see any options to remove or change the created comments. This is not available even for the owner of comments.
Permissions on the CM repository are default Full Control for Everyone.
Something is still missing I guess. I can manage CM the objects within repository from 'Content Administration -> KM Content' view, however I want to enable remove/change options on the BEx Web query results view.
Thank you again.
K

Similar Messages

500 Internal Server Error BEx Web Application

Hello,
can everybody help for the fault, or had the same error ?
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot get connection for 60 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPFactory" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.
Log ID 0014C265209B005B000007300000610A000473C4612CBCB9
thanks

Hi,
I am getting similar kind of error.Can you please tell me how you resolved the issue.
Regards,
Priyanka

Error creating WEBI document in InfoView

Hey all,
I'm hoping there's someone out there that can help me with the issue I'm currently experiencing when trying to create a new WEBI document from within InfoView.
Environment: Windows Server 2003 SP2, BOE XIR3.1SP3, CR2008, MS SQL Server 2005
Using the Designer I've created as simple a universe as I believe you can... ODBC connection to DB, one table, and no modifications to object properties (ie. field names, descriptions, etc.). I saved the Universe in the Enterprise repository (have also tried saving to local disk) and exported the Universe.
In the CMC I granted schedule rights to the Universe for UserA.
When I logon to InfoView as UserA I am able to select the New | Web Intelligence menu option on the Document List screen and am presented with the Universe selection screen. I select the universe created in the designer and the system attempts to create a new WEBI document. It gets to the point where it is launching new document and I received the error below...
An internal error occured while calling 'createDocument' API. (Error: ERR_WIS_30270)
The preferences for WEBI in InfoView are: View Format - Web; Creation/Edit Tool - Advanced.
Now for a couple of twists...
1) When I first created a single table universe after the issue first appeared on a more complex universe, I was able to create new WEBI documents without issue. When I tried adding an additional table to the simple universe I experienced the issue above and have been unsuccessful ever since even with new single table universes.
2) If I logon to InfoView as an administrator (or make UserA an administrator) I can create new WEBI documents with no problems on any of my universes (simple or complex).
I have read other posts related to this error and have tried the suggestions that have been put forth to no avail. It appears to be an issue with security settings but I have been unsuccessful in identifying what those settings might be. If anyone has any suggestions or can provide a breakdown of the security settings required to give users the necessary access to create WEBI documents from universes I would be grateful.
As a side point, I have implemented complex universes at other clients without this issue appearing at other sites.
Thanks!

Hi,
May be you can try with full control rights on universe and connection.After that check yor are getting error or not.this issue with one user or with all users except administrator.
Thanks,
Amit

Bex Web application designer error

Hi experts,
I am getting an error when selecting F4 for FROM and TO in FIscalyear/period in WAD report
FisaclYear/period->F4
Then I go to Slect values for FiscalYear/period where I have
FROM ->F4 and
TO->F4
On clicking F4 for FROM and TO value ranges I am getting this error.
Please sugggest how to solve this error.
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Invalid program status: Duplicate member created: 0FISCPER3: 2009001, Sids: 182009001 & 92009001
com.sap.ip.bi.bics.exceptions.BicsProgrammErrorException
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.addMember(ProviderInfoObject.java:308)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderAttribute.addMember(ProviderAttribute.java:120)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.retrievePresentations(ProviderInfoObject.java:804)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObjectMember.getValue(ProviderInfoObjectMember.java:64)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.InfoObjectMember.getBaseValue(InfoObjectMember.java:89)
Edited by: hema.t on Nov 15, 2011 10:35 AM

hello, i have similar problem.
I've created simple Web template, which shows text "test template", but when i try to open it from the portal I get the error:
""500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Error: Internal error. No esid found.
Log ID 984BE15B700A006C0000029000000E880004BAA5DE640345
Does someone know how to solve this problem?

BEX Web application Designer displaying Java Communication Error

Hi,
When we are using the BEX Web application Designer to create new web template, it throws error saying "Java Communication Error: An UnKnown Error Occured During Portal Communication."
====================================================
Diagnosis
An error occurred during communication with the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
====================================================
Kindly help to resolve this issue.
Regards, Krish

Hi,
Please check below document for connection between BI and Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d082fe32-5037-2b10-3288-fd009f695c74
You might be doing something wrong in any of these steps.
Regards,
Kams

Calling up a Performance Manger SPC Chart from a WebI document

Post Author: satwar
CA Forum: Performance Management and Dashboards
Please forgive my terminology, as I'm only a superuser of B.O. not a computer trained person.I have put a few years into configuring WebI document reports in InfoView of B.O. XI 2. Our company is getting into SPC in a big way, hence my attention has turned to Performance Manager. I was disappointed to learn that I have to create a whole new Universe of objects in Performance Manager in order to conduct SPC analysis on the variables I have been reporting in tables & graphs in WebI documents in InfoView.I can learn to accept that aspect of B.O. but I am a little concerned about my users having to navigate through Performance Manager to view SPC analytics. My users have put up considerable resistance just navigating to WebI documents in InfoView.Hope seemed to be around the corner when I read about calling up Performance Manager analytics from WebI documents. Having read the details it seems like these WebI documents are created in the Performance Manager Universe, not in the Infoview WebI documents that I have already developed in InfoView.If anyone can explain and clarify how this feature works, I'd be eternally grateful.

Post Author: jezbraker
CA Forum: Performance Management and Dashboards
You can Link any documents that are stored as objects in the cmc, regardless of the universe or way in which they were created.openAnalytic.jsp will allow you to open pretty much anything much as does openDocument int the webi world.Once you create the SPC chart in process analysis youll need to view it in the control chart screen then click save as and save it into one of you folders in the corp repository. When this is done you can quickly get an example of the URI syntax by going to create new document in dashboard manger, selecting interactive metric trends, expanding navigation and legend opions, clicking browse, selecting your newly saved analytic and clicking ok. This will but a url into the text box which you can copy and paste into your webi doc links - here's an example of the kind of thing... openAnalytic.jsp?DocumentName=MySPCanalytictest&RepositoryType=C&RepositoryName=SPCTest&DocumentExt=afd&DocumentId=AadTAN28x6lMpTxxlAhW09s&mode=full You may need to stick the odd ../../ or /jsp/ etc in front of the url depecing where you plan to call it from of course. You'll find descriptions of parameters etc for openAnalytic in the product docs. cheers,jez.

Launching a Bex web report in KM in a new window

Hi All,
I am trying to figure out how to configure KM so that it would launch a Bex web report in a new window
instead of being displayed in the innerpage area. The Bex web report is stored in a KM folder.
Can someone point me in the right direction?
Thanks.
Regards,
Mel Calucin
Bentley Portal Architect

Hi Mel,
If you have already assigned the Bex report to a role, then you can open the bex iview and edit the property "Launch in New Window" to Display in separate portal window
If the report is still not created and is existing in the KM you can create a KM navigation iview or KM document iview and specify the document path where the iview is exisiting OR you can open the bex report, capture the URL of it and create a URL iview for the same... you might want to refer to this thread for more details.
https://www.sdn.sap.com/irj/scn/thread?threadID=1260067&tstart=0
And when the iview is ready and the content is getting displayed accordingly, if you want to open the iview in a new window instead of the portal content area, you would have to follow the instructions given above ie to edit the property of iview "Launch in New Window" to Display in separate portal window
Good Luck!
Sandeep Tudumu
Edited by: Sandeep Tudumu on Mar 9, 2009 10:57 AM

Calling a webservice from within Bex Web Application Designer

Hi
I have a web-template built with BEx web application designer which also contains textboxes. This text should be stored by calling a webservice (standard BI-documents are not an option).
Can anyone tell me how I could call a webservice from within the BEx web template to store the text contained in the textbox? The webservice-call should include some of the filter-varialbes of the web application.
Is this only possible by the use of a JavaScript WebItem? If so - does anyone have an example of such a JavaScript.
Thanks a lot in advance.
Kind regards.
Christoph

Thanks for your response. The BSP page would work out fine if I only needed to save the data.
But the next time I call the webtemplate, the textarea should be filled by another webservice call with the stored text (so the text can be modified und saved again). This will not be possible by calling a BSP page.
Do yoiu have any suggestions how to integrate the text (return value from the webservice call) into the textbox in the webtemplate?
Kind regards.
Christoph

WebI document output

Hi
I have a question.
Whenevr a WebI document is refreshed or run manually in InfoView, and saved on the repository, is there a way to get the output file from the server?
Does BO save a copy of the file anywhere on server?
I dont want to schedule the report ans store the output/mail the output. This is a report with prompts and the user needs to change the values each time he/she runs the report and thus cannot be scheduled.
This has to be on a manual basis.
Please help. Please let me know if the question is unclear.
Thanks in advance.

Thank you Kuldeep for your response.
But i guess this is not exactly what i am looking for.
The scenario is, the user needs to inout the values for prompts, which you rightly said can be achieved via refresh on open option.
Now after this report is saved, there can be 2 options, either just save it to repository(which would save the structure and the last refreshed report output). Or save it to the computer as a local copy(xls or pdf).
We actually want to use this file as a parameter file for an ETL process and thus dont want it to save to personal computer as a lcoal copy.
I want to know if the last refreshed report is saved somewhere on the BO server, or if it can be saved to some location? And what format would this report be in? So that the output file can be taken from server and used as a parameter file for an ETL run.
Thanks again

Not able to open a webi document in java

final String CMS = "pundl10492:6400";
          final String userID = "administrator";
          final String password = "";
          final String auth = "secEnterprise";
          IEnterpriseSession enterpriseSession = null;
          try
               ISessionMgr mySessionMgr = CrystalEnterprise.getSessionMgr();
               enterpriseSession = mySessionMgr.logon(userID, password, CMS,auth);
               System.out.println("Session created : "+ enterpriseSession.toString());
               if (enterpriseSession != null)
                    IInfoStore iStore = (IInfoStore)enterpriseSession.getService("InfoStore");
                    ReportEngine reportEngine = (ReportEngine)enterpriseSession.getService("WebiReportEngine");
                    final String query = "SELECT SI_ID, SI_NAME FROM CI_INFOOBJECTS WHERE SI_KIND = 'Webi' " +
                                                  "and SI_NAME like '%Least Accessed Documents%'";
                    IInfoObjects objInfoObjectsWIDs = (IInfoObjects) iStore.query(query);
                    IInfoObject objInfoObjectWID = (IInfoObject) objInfoObjectsWIDs.get(0);
                    int docId = objInfoObjectWID.getID();
                    System.out.println("docID : "+docId);
                    DocumentInstance doc = reportEngine.openDocument(docId);
                    FileOutputStream l_fos= null;
                    String fileName = "morcom" + "_" + userID+ "."+"xls";
                    l_fos = new FileOutputStream("D:\\_workarea\\MORCOM_POC\\reports\\"+fileName);
                    BinaryView docBinaryView = (BinaryView)doc.getView(OutputFormatType.XLS);
                    byte[] b = docBinaryView.getContent();
                    l_fos.write(b);
                    System.out.println("File created");
          catch(Exception e)
               e.printStackTrace();
I am trying to open a document and the code iam using is given above. I am using BO XIR3 and i get
Exception in thread "main" java.lang.NoClassDefFoundError: com/crystaldecisions/celib/trace/h
     at com.businessobjects.sdk.plugin.desktop.webi.internal.d.<clinit>(Unknown Source)
     at com.businessobjects.sdk.plugin.desktop.webi.internal.WebiFactory.makePlugin(Unknown Source)
     at com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginMgr.getPluginInterface(PluginMgr.java:291)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:409)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:361)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:712)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:566)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:167)
     at BOTest.main(BOTest.java:42)
error at this line:-
     IInfoObjects objInfoObjectsWIDs = (IInfoObjects) iStore.query(query);
Can anyone give a code snippet for opening a webi document in release3. The same code works in release 2.
Thanks
Shruti

You have a "NoClassDefFoundError", so a code snippet won't help.
XI Release 2 -> XI 3, then jar files have been renamed and object files refactored.
You've ended up with mixed XI Release 2 and XI 3 jars.
Remove your jars and re-add from XI 3.
Sincerely,
Ted Ueda

How to create a link to Excel, from Bex Web 3.x

I need to create a link, from Bex Web 3.x, to Excel or PDF, how can i do this?
I only do a link with another PAge in internet explorer.
Thanks
Romina

Hi Romina,
I am not sure if I correctly understood your question, but you can try to use the broadcasting functionalities which allows you to publish Excel and PDF documents on the portal, besides online links to real time data.
You can check:
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Hope it can help you.
Kind Regards,
Márcio

BEx Web Application Unknown Error in EP

Hi ,
When opening a BEx report from Portal 7.0, getting the error.How to resolve.
BEx Web Application
Unknown Error
Exception occured while processing the current request; this exception cannot be handled by the application or framework
Log ID: C00099589C2F31A00000000200001A75
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience
Thanks a ton

Hi Daniel,
We can check the FPN using remote role assignment.
1. Open you EP (Consumer)
2. Go to User Administration
3. In Search Criteria, select Role in the first field, in second field select "system alias of your producer" and put * in last filed
4. Click Go
You should get all the roles of your producer on your consumer. This functionality is used for Remote Role assignment.
This is simplest way to check whether FPN is working fine or not.
Waiting for results
Dbalhara

Creating a secondery Axis in Bex Web query

Hi All,
I want to be able to graph my Bex Web query to include a secondary axis. I can't seem to find a place in Bex Web Settings to tell the system I want a secondary axis, even though the help document says its possible.
Please guide me to in this issue
Thanks..
Harish

Hi,
@Vineet:Thanks for you fast reply.
I am not able to find the settings option in the CHART you have mentioned .
can any one could guide me in this please.
Regards,
Harish

Cannot Create Webi document in Infoview

Hi Guru,
Here is my scenario, I logged in as Administrator in the Infoview and planned create webi document on the available exported universe. I didn't find any option over there not only for webi even for the Deski, Crystal etc..
By searching some thread, Again tired by applying the security right as follows
BOE ( CMC ) >> Applications >> Webi >> Right Click " Check User Rights " >> Select User/group >> rights have been Inherited/ Explicitly >> create New Document.
One more thing just found in Infoview preferences, I didn't found options for Webi where I can find for Deski,Crystal, Voyager, Password Changes etc.....
Finally, I tried logging into Webi Rich client >> Error shows " License not valid " >>> Do we need to have a separate license for Webi ....
Please help me out

Hi
I just followed this steps... but does not helped on this...
Logon to Central Management Console (CMC) using Enterprise Administrator account.
Click on 'Folders' under Organize.
Select Manage >> Top_Level Security >> All Folders.
If a Windows prompt occurs showing 'You have chosen to set Security for the Top-Level Folder', click on Ok.
Click on 'Add Principals'.
Select the User / Group from 'Available users/groups' who is to unable to create the Web Intelligence document and move it under 'Selected users/groups'.
Click on 'Add and Assign Security' button.
Uncheck the option to Inherit rights from Parent Folder and Parent Group.
Click on 'Advanced' tab and then click on Add/Remove Rights.
Grant the General Rights to the User / Group as per the requirement.
Expand 'Content' option on the left pane.
Select 'Web Intelligence Report' and grant the following rights:
    12.1   Download files associated with the object
    12.2   Edit Query
    12.3   Export the report's data
    12.4   Refresh List of Values
    12.5   Refresh the report's data
General rights related to the Web Intelligence can also be overridden here.
Click on Apply and then OK.
Click on Apply and then OK on 'Assign Security' and close the User Security for Root Folder.
Navigate to CMC Home >> Universes.
Depending on the requirement, rights can be provided at the Universe level or Folder level.
Repeat Step 5 through Step 10 to add and assign general security for the User(s) / Group(s).
If the security is provided for Folder(s), under Add / Remove rights, Folder rights can be selected from the 'General Rights for Folder' menu.
If the Security is provided for the Universe(s), under Add / Remove rights, following optional rights can be selected:
    20.1   Create and Edit Queries Based on Universe
    20.2   Data Access
    20.3   Edit Access Restrictions
    20.4   New List of Values
    20.5   Print Universe
Click on Apply and then OK.
Click on Apply and then OK on 'Assign Security' and close the 'User Security for the Root Folder'.
Navigate to CMC Home >> Connections.
Depending on the requirement, rights can either be assigned as the 'Top Level Security' for 'All connections' or providing 'User Security' for the specific connection.
Repeat Step 5 through Step 10 to add and assign General Security for the User(s) / Group(s).
Under 'Connection' option within 'System' on the left pane, following optional rights can be granted:
    25.1 Data Access
    25.2 Use connection for Stored Procedures
Click on Apply and then OK.
Click Apply and then OK on 'Assign Security' and then close the 'User Security' for the connection.
If the user still fails to create a Web Intelligence Report, navigate to CMC Home >> Applications >> Web Intelligence.
Under 'User Security', 'Add Principal(s) and select 'Assign Security'.
Remove Inheritance from Parent Folder and Parent Group.
Click on Advanced and click on 'Add/Remove Rights'.
Provide the General Rights as per the requirement.
Expand 'Application' on left pane and assign security to the User / Group as required.
Click on Apply and then OK to save changes.
Click on Apply and then OK on the 'Assign Security' and then close the 'User Security' for the Web Intelligence application.
Logon to Infoview and create a new Web Intelligence report.

BEx Web - Inserting Tabs with multiple Web Templates

I encounter much difficulty to find consistent information on how to create a Web cockpit (BW3.5) by making use of embedded Web Templates (using web template web item).
In particular,
- How to define tab pages?
- How to insert an HTML document in one of these tab pages or in the body of a single Web template?
I would be glad if you could give me links to helpful documentation or share your own experience.
Best regards.
Laurent Querella
BI Consultant
ALTI Belgium

Hi,
I can`t find the BW Expert coding, too.
But try out following coding.
This example template contains 4 tabs
1) Query (assign a Query to DP1)
2) Query View (assign a view to DP2)
3) Template (assign a template ID)
4) Template (0ANALYZER)
rgds Jens
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value=""/>
         TEMPLATE PROPERTIES
</object>
<HTML>

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_2"/>
         <param name="DATA_PROVIDER_ID" value=""/>
         DATA_PROVIDER:             DATAPROVIDER_2
</object>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_1"/>
         <param name="DATA_PROVIDER_ID" value=""/>
         DATA_PROVIDER:             DATAPROVIDER_1
</object>
<HEAD>
<TITLE>BW Web Application</TITLE>
      <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
      <script type="text/javascript">
      
      </script>
</HEAD>
<BODY>
<table cellspacing="0" cellpadding="5" border="0" id="tabheader">
            <tr>
<td class="SAPBEXTbsTab" id="head_TAB1"><A href="javascript:goto_tab('TAB1')">Query</A>
</td>
<td class="SAPBEXTbsTab" id="head_TAB2"><A href="javascript:goto_tab('TAB2')">Query View</A>
</td>
<td class="SAPBEXTbsTab" id="head_TAB3"><A href="javascript:goto_tab('TAB3')">Template</A>
</td>
<td class="SAPBEXTbsTab" id="head_TAB4"><A href="javascript:goto_tab('TAB4')">BEx Web Analyzer</A>
</td>
</tr>
    </table>
<table width="100%" class="SAPBEXTbsBdyEdg" cellspacing="0" cellpadding="5" border="0">
                        <tr>
                <td valign="top" >
      <P>
<span id="TAB1">
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         ITEM:            TAB1
</object>
</span>
<span id="TAB2" ><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB2"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
         <param name="HIDDEN" value="X"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         ITEM:            TAB2
</object>
</span></P>
      <P><SPAN id="TAB3"><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB3"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEMPLATE"/>
         <param name="HIDDEN" value="X"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="TEMPLATE_ID" value="myTemplateID"/>
         <param name="USE_ONLY_BODY" value=""/>
         <param name="NAME_PREFIX" value="TAB3"/>
         ITEM:            TAB3
</object>
</SPAN></P>
      <P><SPAN id="TAB4"><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TAB4"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEMPLATE"/>
         <param name="HIDDEN" value="X"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="USE_ONLY_BODY" value=""/>
         <param name="TEMPLATE_ID" value="0ANALYZER"/>
         <param name="NAME_PREFIX" value=""/>
         <param name="BORDER_STYLE" value="NO_BORDER"/>
         ITEM:            TAB4
</object></SPAN></P>
</td>
</tr>
</table>
<script type="text/javascript">

</script>
</BODY>
</HTML>

CM repository / BEx Web / document administration

Similar Messages

Maybe you are looking for