CM Services stand alone (Unknown session NWDI and grey components in NWDS)

Hello.
We are trying to configure NWDI in portal 7.3  using the following document http://scn.sap.com/docs/DOC-14706 however when Im trying the syncrhonize step (page 22)  it shows me an error HTTP 400 Unknown session wherever I click in the sync page.
I dont know if it's because of this missing step but when I import this in NWDS the dependencies are empty and when I try to create a develpment it shows me greyed components with the mistake ( Software component does not support this development component type. Required DCs are located in an SC that is not visible from the selected one.). If any more information needed please ask me.
Thanks in advance.
Alex.

Thank you !!! it seems that is solved now, it shows me some components good to go, eventhe less When I try to create a Wevdynpro it says "Support component (ACH) for vendor ''sap_com'' is required" Could it be because of some missing DC ?
Great answer thank you !!https://service.sap.com/sap/support/notes/1536755
BTW that note lead me to this other one where I found this part that made the trick
Note 1536755 - DC type is grayed out.
What can be done?
Check in SLD if references from the developed SC to the found required SCs
exist. Create them if they are missing. . Update the corresponding track in CMS
by first syncing current dependencies from SLD to CMS  ("Update CMS" in CMS UI
Landscape Configurator - Domain Data) and then adapting the track in "Track
Data" by  using "Synchronize SC Dependencies" - "Show Software Components out of
sync with SLD", select all SCs shown as out of sync and press "Accept SLD
Definition" and then save the track.  Switch to Transport Studio in CMS WebUI
and check in and import the corresponding SCA files. After that update the
development configuration in NWDS.

Similar Messages

  • I have stand alone LR 5.7 and just downloaded LR cc how do I update the 5.7 catalog to CC?

    I have stand alone LR 5.7 and just downloaded LR cc how do I update the 5.7 catalog to CC?

    Just launch CC and point to the older catalog. CC will update it and save the original intact. Might want to keep the older catalog and LR 5.7 for awhile, once you update the catalog for CC, it cannot be read in the older version.

  • Error 10403 when using Stand-Alon​e Applicatio​n and DAQPad 6020E

    On the computer I have LabVIEW on, I can run my VI and also I can run the stand alone application of that VI. But I can NOT run the stand alone applicaiton of that VI on a 2nd computer with out LabVIEW. I get error # 10403. I belive I build the VI correctly and loaded the proper software/driver because I have found I can run a simple stand alone application VI that does not communicate with my DAQPad 6020E. The second computer does reconize the DAQPad 6020E under the Divice Manager. I tried using differnce divice numbers for the AO and AI...

    Hi,
    The first thing you need to check is make sure the same DAQ driver is installed on both computers. Then, you need to make sure that you can view the device in the Measurement and Automation Explorer (MAX). Once you can do this, then you will need to make sure the LV Run-Time Engine is installed on the stand-alone comp. This needs to be the same version as LabVIEW that is installed on the computer where the application was developed.
    I hope this helps.
    George

  • Can i have both a stand alone photoshop cs3 me and creative suite cs4 installed on the same machine

    Hi, I have photoshop cs3 me and illustrator cs3 me that support arabic language and I'm thinking of buying ADOBE CREATIVE SUITE CS4 PRODUCTION PREMIUM, I'm wondering can I install it along side my already installed adobe cs3 me products or do have to uninstall them first.
    Many thanks

    Yes you can! And you might want to have a read through this:
    http://www.thomasphinney.com/2009/01/adobe-world-ready-composer/
    and
    http://indesignsecrets.com/a-modern-day-chanukah-miracle-right-to-left-language-features-c ome-to-life-in-indesign-cs4.php
    Bob

  • Enterprises Services information for TM, MDM, BI and other components

    Hello,
    I was wondering if anyone had information on where to find out if Enterprise Services (ES) is offered for the SAP components TM, MDM, BI, etc. and if so, where to find information on the impact analysis of installing ES on already installed SAP systems.
    Thanks!

    Hi James,
    For Transportation Management have a look at
    http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?id=A4E8BBB0628111DA36BB000F20DAC9EF&fragID=&packageid=DBBB6D8AA3B382F191E0000F20F64781&iv=
    Michael.vanden.Dungen at capgemini.com is one of our SAP Solution Architects who can tell you all about it.
    Regards, Mendel

  • Session management and java Web Service

    Hi ,
    Can I have two web services one based on Session bean and other on Simple java class, packaged into single ear file? Does NetWeaver supports web service session management/tracking? How can I get an handle to HttpRequest in my Web Service?
    Any help will be appreciated.
    Thanks in advance
    regards,
    rajinder

    Container Managed Authentication. Does everything you need.

  • Is a stand alone Lightroom compatible and will interface with a cloud PS?

    I've been using stand alone versions of LR5 and CS6  and want to convert to the cloud. I am told that there will be conflicts if there is a stand alone and cloud version of LR. True or not? and, will a stand alone LR5 interface with a cloud PS

    there is one, just search with spotlight "Calculator".
    It works great!
    Hope this helps.

  • Will Lightroom stay a stand alone product?

    I have to say that I am very disappointed with the whole CC concept.  Actually that is not quite true I don't mind if a company wants to offer a subscription service - I just don't want my software that way.  I have no desire to pay for software as a subscription.  I want to buy the products I want and have the right to use them for as long as I want.  So, the fact that Adobe is going to stop offering upgrades to Photoshop as stand alone product is disappointing and means I will be staying with CS5.
    But more importantly if the plan is to make Lightroom available only as a subscription then I need to start planning a transition now.  I realize Lightroom is currently going to be sold as a stand alone product.  I am worried about the future.  Can Adobe make some kind of statement about their intentions?  I get that they cannot predict the far future but I would like some indication that the sky is not going to fall next year.

    I agree with the Op and Mr Electron et al. 
    Remember Adobe is primarily a marketing company these days, with LR, CS et al their product.    What  (you might think) Adobe says today does not always match what Adobe will do tomorrow.
    I have spent quite a lot of money on LR and Photoshop/CS over the last 10-12 years, not missing a release, keen to upgrade as early as possible (including Betas).  But that has been at my time of choosing & if/when I felt I could afford it or felt the software was at a stable enough level because you can't accuse Adobe of going over board on releasing bug-free or even bug-lite software.  (The thought of frequent update from Adobe is actually quite scary, all that time spent sorting the mess out ! )
    But I have absolutely no desire to, and WILL NOT, use a subscription service/ cloud for this software be it CS or LR.
    It definitely looks to me that its the way they're moving.  I feel this way because it not just about what they say its about what they don't say.  They are not saying it will not happen, only that no decision has been made - which could easily be deferred final decision until feedback on CS changes have had time to be measure.  It quite legitimate (business-sense) marketing approach. It means you can give an honest answer - 'not in the foreseeable future, no decision taken' - whilst still knowing  with almost certainty what the decision will be.
    So, as I've 30,000 or so photos, I'm starting now to look at the alternatives, as even with such a modest number it will still take time to work out how easiest (and cheapest) to transfer to something else. And also to come to terms with what I will lose.  But better now than when I have 40,000 or 50,000 photos.
    Sad days, but it was fun while it lasted   

  • Code behaves different when SWF is in browser as opposed to stand alone player, why?

    In ActionScript, I have some code that dispatches a
    MOUSE_OVER event when a tween is complete. I am using Tweener for
    the tween. On my Mac OSX machine, I preview the SWF file in a stand
    alone player spawned from my Flash IDE, and the event is dispatched
    and the behavior works as expected, but when I preview the SWF file
    as embedded in a MacOSX browser, the event is not dispatched. On a
    Windows machine, however, the event is dispatched both in a stand
    alone player and within the embedded SWF file in a browser. The
    problem seems to come particularly from the Mac OSX player.
    Has anybody ever experienced this? Is the OSX implementation
    of the Flash player different in a stand alone and browser setting?
    Here is the code that I am using:

    HMMM! Verrrrrry interesting.
    Yes file size is an issue, it's a large project.
    Exterenally host it?
    Where could I go and do that?
    I'm not familiar with this process.  Can you please tell me exactly how it works? 
    And....that means both servers need to be up and running?  Kinda sounds a bit shakey.   This project needs to be strong and stand alone to go here and there.  Durable.   
    I feel safer if its all in one piece.  Bam.
    You know, I noticed "FAST" and "BEST" does not make a difference to file size or quality. 
    Could I be wrong?
    Thanks.

  • Windows Media Player ActiveX not playing image, but WMP stand alone application does. Why?

    I use my Windows Media Player v11 with additional codec to play mp4 files (mp4 are not supported by default with WMP 11, so I had to install a codec). It works fine in the stand alone application, but when I use the ActiveX control in NI, it does not use the codec and I get only the sound... no image. I thought the ActiveX was simply an interface to the same core application used by NI and the stand alone media player. And if it is the same core, it should use the same codec. What am I missing?
    Solved!
    Go to Solution.

    I have a tip for you. If you download Quicktime 7(QT), you may select the QT activex player(see picture). It plays mp4 and looks better. And QT is free so it should not any problem. Try and see if it do you any good
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)
    Attachments:
    sample.PNG ‏114 KB

  • Download Link of the Stand-Alone installer?

    Hi,
    simple question.
    I need the stand-alone installer for firefox AND IE for the non-internet PCs.
    Is there a way to get it?
    I didn´t find a way :-(

    Installers for all platforms can be downloaded from http://www.adobe.com/products/flashplayer/fp_distribution3.html

  • Clone Stand-Alone media bootable thumbdrive

    Hello,
    SCCM 2012 R2 have created a stand-alone media bootable thumbdrive and would like to clone it. Is there a way?
    Thanks!

    Not sure on the quantity of thumb drives they're seeking there is about 10 sites with about 30 systems per site.
    Currently the task sequence takes over an hour to complete the Wizard build on the thumb drive.
    I see a couple utilities that claim to do the whole bit copy. But who knows if issues arises later using one of these solutions?
    Thanks!

  • Oracle PM stand alone against installables for WebSphere

    Hello,
    I am new to BPEL and would like to know, where the main advantages for integrating the process manager in WebSphere are. I would appreciate if somebody could give me some keywords.
    I used the stand alone for some tests and would like to use the installables for WebSphere.
    I tried the only manual I found for oracle, but the build.xml didn't work correctly. The jacl scripts where not executed because the wsadmin.bat was not executed.
    Did someone install the installables for WebSphere and could give me some hints to get this working. The configuration was ok and I use the Rational Application Developer with WebSphere 6.0.2.
    Thank you very much!
    Sven

    Make sure that the BPEL server configuration in the designer is not defined. That is, all the fields are blank.
    You can set that in Eclipse Window -> Preference -> BPEL

  • Stand alone VU meter

    Does anyone know of a good stand alone VU mete. And/or does anyone now if Apple is ever going to bring back the VU meter in iTunes?

    -> VU meter
    Apple has not stated one way or the other.

  • Service Modules in 6500s, IPS/IDS and Stand-alone options.

    Hi,
    My first post here and it's a question regarding knowledge that I can't seem to find via CCW and through people I know.
    Does the Service Module in the 6500 i.e. WS-SVC-ASASM1B-K9 come with or support an IPS/IDS option?
    Does a stand-alone ASA5500 come with an installed IPS/IDS option.
    Thanks.

    > Does the Service Module in the 6500 i.e. WS-SVC-ASASM1B-K9 come with or support an IPS/IDS option?
    On the Cat6k5 is the IDSM2. Thats a completely outdated module with 500 MBit/s of throuput. For the Datacenter designs Cisco recommends the standalone IPS 4500 instead a module if you need good IPS throughput.
    > Does a stand-alone ASA5500 come with an installed IPS/IDS option.
    The ASA has build-in IPS with a fixed signature-set that is not such rerlevant. The better way of doing IPS on the ASa is to have an optional IPS-module. These modules are didicated hardware on the legacy ASAs (the ones without -X) and pure software-modules on the new ASAs. The 5585 is an exception where IPS is also a dedicated hardware-module.
    Sent from Cisco Technical Support iPad App

Maybe you are looking for