Cm1312nfi mfp on 32bit windows 7 - upgraded with full solution sw and can't scan from printer

I have had a cm1312nfi mrp since 2009 that works fine but my HP Solution centre stopped giving me ink levels.
I uninstalled the printer software and downloded the current full solution sw for 32 bit windows 7 from HP. The printer works but I did not 'get' HP solution centre back and so cannot scan from the printer.
[I did download HP toolbox so I can see ink levels and can test the scan function which does work. However it does not have the ocr capabiltity which I had before and also it doesn't allow me to operate the scanner from the printer.]
Can you help me either get HP solution Centre back and functioning on my computer or else suggest some other solution to my problem?

Hi,
The HP Solution Center is a software for inkjet printers as the HP Officejet product line, not for laserjet printers as the CM1312.
You may find the Supplies status within the HPToolboxFX softwre by selecting Supplies:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=35589...
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HDD died, replaced with a larger drive and can't restore from TM/TC

One of my kids managed to fry the HDD in my trusty MacBook. Luckily, I have everything backed up via TM onto our Time Capsule.
I installed a new drive and formatted/partitioned it with a 10.5.2 MacBook boot disc. The problem now is the disc will not open TM so I can run a complete data restore from the TC. When I select the TM utility from the pulldown, nothing happens. The machine just sits there, although I've verified that it is connected to the TC via our home network.
I also receive a dialogue that System 10 cannot be installed on my machine, although it was running 10.5.6 perfectly before the HDD crashed.
I've just purchased a Leopard retail full install disc, thinking that will be the solution to successfully moving all the data from TC back to my machine.
I wonder whether there's a quick(er) solution to this whole thing, and whether I didn't waste money buying a new Leopard install disc.
Thoughts?

If the disc you're using gets as far as the option to restore from backup, it should be fine. After selecting +Restore from Backup+ you should get another screen allowing you to select your TM drive, or search for a Time Capsule.
Do you not get that screen at all, or do you get it but it's empty and can't find your TC?
I don't know much about Time Capsules, but can you connect it directly to your Mac via Ethernet?
That might get the installer to recognize it, and if so, the restore will be much, much faster.

I just upgraded to a new iMac running OS X 10.8.2 and can't scan from by Brother MHC 7820N. Printer works. I reinstalled the scanner driver but when I try to scan, the scanner doesn't connect to the imac. Image Capture says no scanner connected.

I just upgraded to a new imac running OS X 10.8.2 and am having trouble scanning from my Brother MHC 7820N. Printer works fine but the scanner won't connect to the imac. I reinstalled the scanner driver from Brother.com but no luck. When I go to Image Capture, it says no scanner connected. Any suggestions?

You might try a third party scanner software. Printer manufacturers are terrible about keeping their products updated. I'd recommend VueScan, you can get a trial version here and if it works and you like it you can purchase it.
http://www.hamrick.com/

When I am using Firefox I keep getting unrequested Windows opening with full page advertisements. Why is this happening and how can I stop it?

When I am using Firefox I keep getting unrequested Windows opening with full page advertisements. Why is this happening and how can I stop it? This is particularly aggravating when the new page has music or a voice message that intrudes even when I am not looking at the page.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

What is the exact error message?

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

Hi Jo,
If I'm interpreting this correctly, the Word file downloads correctly, but when you open it in Pages, the link(s) which your instructor has embedded in the Word file are not correctly translated into Pages.
If the link shows the actual address, you should be able to copy that and paste it into the location bar in Safari, press return, and get to the website that way.
An alternate route might be to download one of the open source Office applications, OpenOffice.org, LibreOffice, or NeoOffice. These are written to more closely emulate the behaviours of MS Word than Pages, and may provide better support for links embedded in Word files.
Regards,
Barry

HT202879 I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Office for Mac, http://www.microsoft.com/mac/products, can open/edit/create Office documents.If your external drive is formatted NTFS then you can copy the Office documents to your computer and work on them. You won't be able to save the files back to your NTFS formatted drive. But you will be able to save the documents to your internal drive. You can move all the external files to your internal drive then format the external drive for Apple. Then you can copy the files back to your external drive for ongoing use.

I want purchase order bdc or bapi with full solution

hi,
if any one have purchase order bdc or bapi with full solution . plz send me .
thanking u,

hi
Just take all required fields to create PO into one internal table . Just use BAPI_PO_CREATE1 function module. In that function module give internal table name. It will create the PO. Extra decorations like error messages and all you need to take care.
Reward if it helpful.
Thanks
Siva Kumar

HT4759 I tried to download icloud for pc windows vista with 2.1.2. and when download was almost complete it said it belonged to another user unknown to me so I stopped the process how do I start over?

I tried to download icloud for pc windows vista with 2.1.2 and when it was downloading almost finished it said it belonged to an unknown to me user?

You need to explain that, before you finished downloading something said that it belonged to another user ?
What said that, can you post a screenshot?

I can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application, my brother can upgrade with internet that just me can do that

i can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application, my brother can upgrade with internet that just me can do that

Is your MacBook compatible with Mavericks? Open  > About this Mac > More Info, and you will see the MacBook model you have got. Then, check in this site if it's supported > http://www.apple.com/osx/specs
If your Mac is not compatible, OS X 10.7.5 is the most recent version for your Mac. Also, copy the whole message you see when you open the Mavericks installer

I upgraded to OSX Yosemite, own a MacBook Pro 2013 with 8GB memory, 2.6 processor and can not email from iPhoto (9.6)

I upgraded to OSX Yosemite, own a MacBrook Pro 2013 with a 2.6 Processor, 8 GB memory and can not email from iPhoto (version9.6)

In iPhoto preferences, general, is email photos using mail set or is it set to something else?

Can I start Pages with full width zoom and hide inspector?

I'm a journalist, sometimes when I fire up Pages I need to get typing as quickly as possible.
I created a template with full width zoom and hid the inspector - that's how I'd like things to start. But when the template loads it reverts to a narrower wdith and the inspector is back. Can I force things to start the way I want?

I've got the same problem. My preference is to have a plain screen with the toolbar and rulers hidden and the inspector closed. The toolbar and rulers are no problem, but how do I set a default to keep the inspector closed?

Have a mbp late 2011 2.2Ghz original config with 4G of ram 1333mhz , have upgraded ram to 8G of 1600mhz than upgraded with 16G of 1333mhz and find it much slower, should i return to previous config ?

Cheers everybody, new here...
I know, despite the specs published 8Gmax and 1333mhz, for the macbook pro late 2011 2.2G i7 processor
We can read here that its possible to go 16G ram, and also to 1600mhz.
1-have a mbp late 2011 2.2Ghz i7 (original config with 4G of ram 1333mhz)
2-last w/e have upgraded ram to 8G of 1600mhz found it seemed to work fine and it was fast
3-than upgraded with 16G of 1333mhz and find it much slower
Not sure of what to do from now :
wondering if it could be that 8G 1600mhz is optimal ?
I havent tried 16G of 1600mhz yet...

Hi there !
Update:
Here are the last changes, as of this morning, of the configuration on my macbook pro late 2011 (2.2Ghz processor 15.4 screen).
Now have 16 G (2x8) of Kingston RAM 1600mhz (12800 1.35V) that and a brand new 256G samsung 850 pro SSD.
I KNOW...NOT QUITE THE SPECS SUPPLIED FROM APPLE/INTEL ... :/
I was able to trade the 16G 1333mhz purchased RAM for 16G of 1600mhz , so i gave a shot...
So im happy about the result and hope this will last and not fry in the next weeks...
Honestly It's running quite well and fast too.
Thanks everybody and good luck
p.s.
And Here, as promised, the answer from Intel :
joe_intelIl y a 3 jours
The document does not list all the processor models but it is the correct document for your processor family (http://ark.intel.com/products/family/59136/2nd-Generation-Intel-Core-i7-Processo rs#@Mobile). "1Gb, 2Gb, and 4Gb DDR3 DRAM technologies" refer to SDRAM density, it is not about capacity as it is usually expressed in GB (instead of Gb). SDRAM density depends on the total amount of memory chips on the stick and per side (SDRAM organization). Memory modules rated or sold as 1600 MHz may or may not run at 1600 MHz; this depends on the Serial Presence Detect. If the SPD is 1333 MHz it will run at 1333 MHz by default unless it is configured manually. If the memory runs at 1600 MHz (by SPD or set up manually), the memory controller might be running at a higher clock speed than what it was designed for, this may cause issues along the way.
Recommandation1
B BIl y a 10 heures
Hi JoeThanks for the answer Im feeling optimistic...I installed 16G(2x8) ram on my late 2011 macbook pro this is 1600mhz 1.35v ram.Its working fine for now...Hope it lasts;)

I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Cm1312nfi mfp on 32bit windows 7 - upgraded with full solution sw and can't scan from printer

Similar Messages

Maybe you are looking for