CM2012 Single report for deployments (packages, apps & TS)

With the introduction of the new Application Model deployments in ConfigMgr 2012 is there anyway to report on deployments regardless is its a package, TS or App deployments in terms of status and laststatus time.
Hi All,
**Re-posting in correct forum :-) **
I've been looking through the current reports and I haven't found a way to report on what we need.
Our requirement is to be able to report on the count and status of the deployments per Client that have executed in a given timeframe (say the previous 30 days\1 month)
What we are trying to achieve is a single report for the results of all deployments (apps, packages, TS) per client within a certain timeframe.
When it was simply advertisements in ConfigMgr 2007 this could be achieved using the Last Status times within the ClientAdvertisementStatus view in combination with the views Advertisement, AdvertisementStatusInformation and CurrentAdvertisementAssignments.
There is some decent reporting on deployments – particularly the DeploymentSummary view, which contains combined information on Apps, Packages and TS but what seems to be missing is the last or latest status time to indicate when
the status occurred (or when the app deployment executed). I’ve been looking through the other views but haven’t yet found a last status time so we can report within a given timeframe.
Anyone else looked at creating this or something similar yet?
Thanks

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
It is unclear to me, do you look at the built-in report and try to modify them? Which built-in report give you the best results?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Dynamic creation of single reports for characteristic value combinations

Dear Experts,
We have a report showing the monthly sales from one reporting unit (RU) to another u2013 see example below:
RU 1, RU 2, Sales 100
RU 1, RU 3, Sales 60
RU 2, RU 1, Sales 20
RU 2, RU 3, Sales 40
There is a requirement to automatically generate single reports for each combination of RUs selling to each other and broadcast these reports automatically by mail:
Report 1:
RU 1, RU 2, Sales 100
Report 2:
RU 1, RU 3, Sales 60
Report 3:
RU 2, RU 1, Sales 20
Report 4:
RU 2, RU 3, Sales 40
Of course it would be possible to create single reports for each combination using fixed filter values. But we need a dynamic calculation because there are not always sales for each combination. Moreover this would be difficult to maintain, because each time a new reporting unit has been created, new reports have to be created as well. We are looking for a completely dynamic solution,
Maybe there is a way to solve it with the BEx Broadcaster function u201Cprecalculation of value setsu201D or u201Cburstingu201D. But we unfortunately do not have any experience with this.
Thanks a lot in advance for your help!
Best regards
Marco

Hi,
Using the bursting functionality in the broadcaster this is possible. I think you would want to send the reports from RU1 to RU2 and RU1 to RU3 to a recipient linked to RU1 or somehting. In that case you need to add an attribute email to the RU infoObject. In the bursting settings you can use that value to determine the recipient of the email. Furthermore, you can automatically split the resultset to receiving reporting unit.
If you have any specific questions regarding this subject, let me know.
Kind regards,
Alex

Single Report for production scrap and Movement type 551 scrap

Hi All,
Can we include the scrap information from production and scrap from movement type 551 into a single BW report?.......My assumption is we cannot include it into a single report coz production scrap will have a different material information and scrap from movement type 551 will have a different material information..please correct me ig i am wrong......
Regards,
Shravani

hello,
you can have a single report by two options
1. have a variable on movement type.If you choose 551..U will get materials of tht movt type.
also if the select teh movt type for prodcution, it wil display its materials.
or
2. U have to place movt type in the rows.Place movt type and then material in the rows.
Then u will get for each movt type..its corresponding materials.No variable selection needed here.
Regards,
Dhanya

WIP QTY. AND VALUE IN SINGLE REPORT FOR A PARTICULAR PERIOD

Is there any report for a particular period that we can get the WIP qty. and value in single report. If there what the fileds we have to select.
Ex. We want what is the consumption qty. and value and what is the GR qty. and value for the period ending June 08.

Hi,
You can use the T-Code KKAS to get the WIP Qty against a given plant/material combination.
some of the other supporting t-codes are:
KKAO                 WIP Calc.: Collective Processing
KKAQ                 Display WIP - Collective Processing
KKAT                 WIP Display for Product Cost Coll.
KKAV                 WIP Calculation for Cost Object Hier
KKAW                 WIP Display Cost Object Hierarchy
KKAX                 WIP Calculation for Order
KKAY                 WIP Display for Order
Regards,
JLN

Multiple view state best practice for IOS packaged app - Tabbed view or blank template?

TabbedViewNavigatorApplication or plain Application?
I have an iPad app that has a fairly complex main view. Has lots of view state changes. Before a user can get to that main view, however, they have to go through two other screens:
1. Authentication
2. Fill out and submit a small form (maybe 6 fields)
If they do those two things right, they can move on to the main view. If they don't, they can't move on and the main view shouldn't load.
Don't want a tab bar showing in the main view. Has to be full screen.
My thoughts were:
1. Start with the tabbed view template because it's built for this. Just figure out a way to hide bars top and bottom for main view.
2. Use a blank template and do everything with standarf Flex view states
Not sure...

Or you can go with door #3, a blank template with a ViewNavigator you use to push and pop your views from the Main.
View states are heavy. Avoid them like the plague in mobile apps. They are ok for small things like buttons and such, but that's about it.

Support for native packaged apps?

Hi,
I'm looking to incorporate some Native Process functionality into my app, which means I'll be deploying EXE, DMG, and possibly RPM version of the application.
Is there anyway that Melrose can facilitate this in it's current state? Looking at the developer panel, it doesn't seem so...

That helps alot, I'll now have to re-think my business model as obviously InMarket is not the place I can be if I want to develop cutting edge AIR applications. I truly appreciate the timeframe though, it gives me some solid info I can plan around.
I'm not sure I agree with the direction entirely, I think the monetization opportunities go down 10-fold by not allowing use of the Native API's in 2.0.
With the native process API's the variety of application's we could build in AIR expanded exponentially, suddenly we can take advantage of thousands of pre-existing native processes to do all kinds of things that AIR can't do natively. The possibilities are endless.
So, while you are focusing on reaching into new markets, you're limiting AIR apps to be simplistic in nature, and quite limited in functionality. Not to mention, it's a poor message to developers: Here's this API we released, but it will be 18mths+ before we will actually support it in our own storefront.
I'm not really sure what one has to do with the other as well. Mobile/Tabled and TV's will obviously not support Native Process anyways, so I don't see how adding support for native apps in Desktop storefronts, should really affect the partnerships / development of these other storefronts.
It seems you guys are overthinking things. Start with getting the simple/basic stuff working properly, then you can conquer the world

Generating a report for non-existent apps?

I have 200+ machines on my network and manage mostly through ARD, I am trying to figure out a way to generate a list of computers that DO NOT have a specified app installed. Can this be achieved through either ARD, AppleScript or a combination of both?

well if you send unix command and do some thing like:
ls -al /Applications/Firefox.app
if it's not there , you would get back
ls: /Applications/Firefox.app: No such file or directory
BUT that dosen't tell you what verion is installed.
you could do send unix command:
defaults read /Applications/iPhoto.app/Contents/version.plist CFBundleShortVersionString
if it's installed you'll get back some thing like:
9.2.1
if not installed you'll get back some thing like.
The domain/default pair of (/Applications/iPhoto.app/Contents/version.plist, CFBundleShortVersionString) does not exist

SCCM 2012 NO SP - Reporting for application deployments not up to date

Hello,
We have a problem when deploying applications with our SCCM 2012 NO SP.
The reports for the application deployments and sup deployment are not up to date.
The applications have been deployed on the clients but the information is not in sccm servers.
The reporting for the package deployment are working correctly.
Do you have an idea ?
Thanks

Hi,
How are things going? Please let us know if there is any progress.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Single Report Goods Receipt to Vendor Payment ( GR-IV-vendor payment)

Hi Friends,
My client wants to asking the single report for GR to Vendor payment. Please let me know how to get the report?
Regards,
Chandra.

Dear Chandra,
To my knowledge, there is no standard report available for this.
You can use the tables BKPF, BSEG, MKPF and MSEG for creating a report.
Kindly close this thread in this forum and raise the same question in MM and FI. So you might get answers for your query.
Best Regards,
Raj

Scheduling WebI reports for Dynamic Prompts

Hi All,
Please find my requirement
Scenario 1:-
I am having 30 Different Process Code ( 10 –OAR; 20 – Credit USA; 40 – New Sales etc.) in our project.
Currently I am developing a single report for each “Process Code”. (Total 30 Reports – Templates and query will be 98% same except for different Process Code).
Let us assume that “End user” will not have BO Access. So all the developed reports will be scheduled and sent to the corresponding end user as BO PDF format.
Our Requirement:-
In near future, we will be getting “New Process Code” in data. So the End User wants report for “New Process Code” also.
Is there a way so that we can automate BO to pass each and every Process Code separately to existing BO report and get multiple instance BO PDF output report (One for each Process Code)?
Please give me some solution to achieve this.
Thanks and Regards,
Tharini

Hi Arijit,
Thank you for your response. Irrespective of the recipients i need to pass dynamic parameters separately to existig BO report and should get multiple BO Pdf output for all recipient.
Currently I am having only 30 values. So as of now I can pass these 30 values separately to BO WebI report and Schedule separately for 30 instances.
What if i get 2 New values (Value 1, Value 2) next week and want to view the BO Pdf reports for these 2 values separately (2 New Reports for Value 1 and Value 2 separately)?
How I can achieve these? Is it possible with publishing? If so, please explain it to me.
Thanks,
Tharini

List devide into deferent spool and generate no of PDFs using single Report

hi,
i am writing a program which is generating the ammendment data for each vendor,i am generating a pdf and i need to send it to perticular vendor mail. i am facing problems,
1.in a single program i need to get the ammedment data for every vendor (LIFNR) respective Material (Material).
2.pdf should generate for each vendor saparatly and i should send to perticular vendor mail.
i am facing prob ..in generating a single report for all vendor,and devide those to seperate spools.
can any one help me out in this??
Thanks,
DPK.

hi Sandra ,
please can you give some clear picture on this??
here i am sending my dispaly part..
loop at it_finaltmp into wa_finaltmp.
     WHERE lifnr = wa_final-lifnr.
*at new lifnr.
      on change of wa_finaltmp-lifnr.
        write: /1(80) sy-uline.
        write: /1 '|','Supplier Code:',
                       wa_finaltmp-lifnr, 80 '|'.
               it_final-lifnr, '|',
        write: /1 '|','Supplier Name: ',
                    wa_finaltmp-name1, 80 '|'.
        write: /1(80) sy-uline.
        loop at it_final into wa_final
          where lifnr = wa_finaltmp-lifnr.
          on change of wa_final-matnr.
            write: /1 '|','Material:',
                          wa_final-matnr, 80 '|'.
            write: /1 '|','Dicription: ',
                          wa_final-maktx, 80 '|'.
            write: /1(80) sy-uline.
            write: /1 '|', 2(5) 'Plant',
                      8 '|', 9(10) 'PO No',
                    80 '|'.
            write: /1(80) sy-uline.
            sort it_finaltmp1 by matnr ebeln. " DESCENDING.
            loop at it_finaltmp1 into wa_finaltmp1
              where matnr = wa_final-matnr.
              write: /1 '|', 2(5) wa_finaltmp1-werks,
                         8 '|', 9(10) wa_finaltmp1-ebeln,
                       80 '|'.
              write: /1(80) sy-uline.
            endloop.
          endon.
          clear wa_finaltmp1.
          clear wa_finaltmp.
        endloop.
      endon.
and my selection part::
perform get_lifnr.
perform display_data.
perform get_emaildata.
new-page.
commit work.
new-page print off.
end-of-selection.
if sy-batch eq 'X'.
    perform get_job_details.
    perform obtain_spool_id.
    perform convert_spool_to_pdf.
    perform process_email.
please can u give a clear picture wr can i call my spool performence in loop.
thanks,
PK.

Is Crystal Report for VS2010 runtime redistributable package required?

Is Crystal Report for VS2010 runtime redistributable package required when develop reports using WPF window/XBAP technology?
Is it required to install this runtime package (.MSI/.MSM) into the client machine?
If .msm is to be used, then how to setup and deploye msm package into VS2010?
Environment:
VS 2010
CR for VS2010
Please reply friendz.
Thanks & Regards,
Mani G.S.

Hello Mani
Yes, the runtime is required on all computers that the app will run on. See the wiki [Deploying Crystal Reports for Visual Studio 2010 runtime|http://wiki.sdn.sap.com/wiki/x/ZwdeDw]. Also, consult your CRVS2010 developer help file:
http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
- When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed. The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
Requirements:
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
server to SAP R/3. The selection screen parameters would be:
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
to SAP R/3. When this transaction is executed, it should not have the 'Logical
Filename' parameter anymore on the selection-screen. Instead it should only have
Local File name on the presentation server:
Sales Organization:
Distribution Channel:
Division:
    The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
So how should I make these parameters invisible depending on the transaction codes execution.
I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
I have an idea of using SY-TCODE.
EX:
AT SELECTION-SCREEN OUTPUT.
IF SY-TCODE = 'ZJPVCS303'.
LOOP AT SCREEN.
IF SCREEN-GROUPID = 'GRP'.
   SCREEN-INPUT   = 0.
   SCREEN-INVISIBLE = 1.
   MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF SY-TCODE = 'ZJPVCS303_US'.
LOOP AT SCREEN.
IF .....
ENDLOOP.
ENDIF.
ENDIF.
But I am not able to get the output which I require. Please help me out.

Hello Rani
Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
PARAMETERS:
p_as_fil          TYPE filename   MODIF ID unx, " e.g. Unix server
p_pc_fil          TYPE filename   MODIF ID wnd. " e.g. Windows PC
AT SELECTION-SCREEN OUTPUT.
CASE syst-tcode.
*   transaction(s) for upload from server (AS)
    WHEN 'ZJPVCS303.
      LOOP AT screen.
        IF ( screen-group1 = 'UNX' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
*   transaction(s) for upload from local PC (PC)
    WHEN 'ZJPVCS303_US.
      LOOP AT screen.
        IF ( screen-group1 = 'WND' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
   WHEN others.
   ENDCASE.
Regards
Uwe

How to create the multiple spool requests for a single report.

Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.

Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana.

HT4009 Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

CM2012 Single report for deployments (packages, apps & TS)

Similar Messages

Maybe you are looking for