CM2320 unwanted black fading borders left and right

Hello,
I have a CM2320. When printing I get about 2-3cm wide of unwanted toner at the left and right edges.
At the edges it is pretty black and it is fading to the center of the page.
I ran the cleaning routine. The reference page printed after this is perfectly fine. Then when I print another page from software the problem is back.
Can anybody tell me what is likely causing this problem?
I was thinking about replacing the toners, but as these are rather costly it would be really nice to know in advance if this will have any effect, and if this problem can be solved at all.
Thanks in advance for any help.
Ronald

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • How to make those shadowed borders left and right of your page?

    Hi, Can someone tell me if I am on the right track? Here's what I've done so far. I've specified the background colour in the properties section. I've set up a 3 column table (fixed size) that has small columns left and right and a big one in the middle. For those small columns I've pickwhipped to 2 small gifs with the shadow. Previewed in Safari and everything looks ok.
    My question: is this the best way to do this? Or does it need a CSS approach? And if so, how?
    Now I want to give the bottom a shadow as well. Do I proceed in the same way? So make a left corner, right corner and a bottom? I'm working with GL CS2.

    The best way to slice things up depends on how the page is layed out. If the content area has a fixed width that centers (or doesn't), then might make more sense to have 3 vertically stacked divs with the background and drop shadows, then nest another div in the middle with margins for the actual content. Or, if the content size is completely fluid, the same structure could still work with floating divs (or absolutely positioned relative to a single container?) holding the corner images. Or there's always the old-school tables way of slicing things up (though I'd avoid that).
    There's more than one way to do it, and I don't know that any single option is necessarily the "right" way to go... as long as it works and validates?

  • Clips import with black edges left and right

    I viewed my clip (avi file) using quicktime to confirm that it was the right one that i wanted to import and it looked fine. Then i imported into imovie and it doesn't fit the whole screen. It's got about 1/8 inch of black along the left and right. The weird thing is that when i import photos it does the same thing but i scale them to 102 % to correct. How can I correct this?

    bear in mind that tv broadcasts are often stretched/zoomed/cropped etc to make it appear that it is widescreen, when really it is 4:3.
    also it is possible that your TV is simply stretching to make it fill your screen.
    your TV may be able to stretch it to fill the screen, but the appletv will always output it in the correct aspect ratio.
    also it is only recently that most of the tv output has been widescreen. 6 years ago when wire season 1 was produced, 4:3 non-widescreen was very much the norm, especially in USA.

  • White Borders Around the Left and Right Edge of a Published Movie

    Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
    Any help would be appreciated.

    You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
    <style>{margin:0px;}</style>

  • When i turn on my Ipad air In the cornors of the Black Screen It has white stuff near the top bottom  left and Right   When it's all it turned on it's fine But when I go to a black Background It  does the Same is this normal?

    When i turn on my Ipad air In the corners of the Black Screen It has white stuff near the top bottom  left and Right   When it's all it turned on it's fine But when I go to a black Background It  does the Same is this normal
    It
    I
    O

    when I turn on my ipad and the black screen comes on I have a slight white light running along the bottom meaning the whole screen is not black. Is ths normal.
    better details Sorry
    N

  • All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    Did you try restart the Mac?

  • Enlarged photos show white borders on left and right margins

    Should these white margins be present when viewed in enlarged format? I can't get rid of these left and right margins when printing 4x6 borderless format so I assume it needs to be corrected in iphoto first.

    Did you crop your photos?
    Most digital cameras use a 3:4 aspect ratio. When you print onto 4X6 paper, you will have bands on the sides of the photos. It's the same thing as watching a "letterboxed" movie on television with the bands at the top and the bottom.

  • LED display, bright edges, specially left and right

    I have a mbp 5.1 late 2008 model received jan 2009.
    My display/screen is becoming brighter and brighter at the left and right edges.
    If i look at a black screen, the left/right edges are not black but getting brighter than the rest of the screen.
    As this computer is primarily for serious photo processing, this is really annoying and if it gets worse its a computer who cant be used at all.
    Any ideas ? Any trips/trix to conquer the problem....or are the display pure and simply defect (great...just outside 2 years complaint period)

    Hello Dominic,
    It is not normal.
    Sometimes my windows are rounded the way yours are and sometimes they are not.
    Click on the picture of my post to zoom and see the problem.
    Here is another screenshot, this time with a windows which has no issues :

  • IMovie crops-truncates-cuts-deletes left and right area of ".mov" movie!!!

    iMovie crops-truncates-cuts-deletes left and right area of mov movie!!!
    I am using iMovie 8.05 on Mac OS X 10.5.8 on Mactel. Is that iMovie '09. The dual-naming is utterly confusing.
    OK, here is my problem:
    When I import a ".mov" file (generated by screen movie capture via Internet using Snapz Pro X) into iMovie, it shows complete on the lower pane (event timeline). Yet, when I drag from the event timeline pane it to the top left pane (project), the movie shows truncated-cropped (the left and right parts of the screen are not shown). That is, such left and right areas are deleted!
    Is this a bug? How to fix it?
    Thanks.

    Update:
    I have seen that I can use the "Window - Cropping..." menu to fit, crop and ken burns, yet if I choose to fit, then all the movie is included which is what I want, but also black areas are shown on top and bottom of the movie which I do not want. Is there a way to delete such black areas?
    If instead I try to use crop or ken burns, I cannot include all the movie area, because the real area of the movie is much wider than the area that the iMovie frame allows. Is there a way to select beyond the default area on the left and right, to really include all the movie?
    Thanks.

  • HT4930 My mouse suddenly started lagging when moving up and down. Left and Right seem to move fine. Waht's wrong?

    My mouse has suddenly started lagging when moving up and down. Left and right movement seems fine. in fact, it's perfect. I tried changing the tracking speed to no avail. it sped up the left and right movement, but "up and down" still remain sketchy. HELP!!

    Hi Torrence,
    You may have to suffer until you can get to your local artist's products store.   There you should be able to buy square metres of fine matt black felt (maybe in a shop selling materials too).   This makes an excellent and inexpensive base that looks good too.   Have used it for years.
    Lay it on your desk and hold it in position with some double sided sticky tape.

  • Touchpad left and right clicks don't work on Yoga 2 pro

    Hi,
    I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
    I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

    Hello,
    I've had a Yoga2 Pro now for six months or so.  Just recently the left click stopped working correctly.  What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click.  Sometimes it works, sometimes it keeps stopping.  
    Now, the right click is malfunctioning as well.  I press right click on something like an image, and nothing happens.  I have to right click on something 2-10 times now for it to register that I'm right clicking.
    Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which  can)?
    I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix.  I'm hoping its not a hardware malfunction.  I am running Win 8.1.
    Thank you.

  • My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

    I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
    ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar  or contact an apple specialist through phone because of my work schedule and work load.  I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

    I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
    Phil

  • I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    Your TV hasn't entered some odd picture in picture mode has it with  two 'inputs' side by side?
    AC

  • How do I deal with audio, seperate left and right and make each stereo--CS5

    I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks?  Do I have to go to Soundbooth or is there a simple way in Premiere?

    Bill G, tell me what I am missing and I'll use your method.  I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
    I record a lav on one channel, and a different wireless mic on the other.  When captured, I have a clip that PR would normally treat as a single stereo track.
    BEFORE putting any clips on the timeline, select all clips and set channel mapping.  Set each channel to mono.  Now PR treats these as two mono tracks.  The output for each mono is the master track, which in my project is stereo.  I can change "volume" for each track in the mixer, etc.  but each channel is provided to the left and right  master output.
    I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

  • Is there a way to tie to iPads together so that when you turn a page with a tap on one, both iPads turn a page.  I am using the ipad to replace piano sheet music.  The challenge is that ordinary sheet music is on both a left and right page.

    We are trying to use an ipad to replace ordinary paper sheet music on a piano.  When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned.  The idea with using an ipad is that a tap turns the page, it stays turned.  However,,,,,ordinary sheet music is on both left and right pages.  With one turn you get 2 new pages.  The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano.  If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice.  We are trying to get used to using the ipad.  We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages.  Maybe this is getting too complicated.
    Anyway to tie 2 units together
    John

    No way to control one device from the other.  But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)?  Not sure if that helps as it must make the actual print smaller to do so.
    http://www.forscoreapp.com/about/#interface

Maybe you are looking for

  • Incoming payment with zero value

    Good Morning, I'm trying to do an incoming payment with zero value (Negative JE and Positive Invoice selected) but I have the error message: "Confirmation amount must be greater than zero". I have the Internal Reconciliations to do that, but I need t

  • How do you get professional quality digital photos????

    You open a magazine or look online and you'll see celebrity pictures that look crystal clear. How does a consumer get this quality?? Is it the camera?? I plan on buying a new camera soon, a Canon with a Digic II processor, but I want my pictures to l

  • VIM: need for VIM specific reports

    Hello Experts, My need is to create a report from a cross of two existant reports: VIM_ANALYTICS and REMINDER (Transaction /OPT/VIM_ANALYTICS and /OPT/REMINDER). - Is there a point in the customizing  where we can create VIM customer reports ? I mean

  • Choose a file for photo

    A webpage ask me: Picture: 'Choose File' no file selected. (NOTE: Uploaded files are limited to a max file size of 2 MB, jpg, gif and png formats.) When I click 'Choose File', which is a button to click on, I get my documents menu. I don't know how t

  • Getting and printing command-line arguments

    (char *)curpsinfo->pr_psargs will give me the "first part of the command line", but that has two deficiencies: 1. If the command line is long, it might get truncated. 2. If the command line contains white space, I have no way to know whether the spac