CM2320fxi fax dials but wont connect or answer intermittently after firmware update

After installing the most recent firmware update, the fax will intermittently fail to answer incoming faxes or will dial but not connect on fax send. Will work fine for a day or so, then stop working. Have tried unplugging power source and cables and this works only briefly. Have tested line with a different fax and it works fine.

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

MacBook Pro losing connection w/ AP Extreme after Firmware Update

Since the firmware upgrade (7.3.1) of my AirPort Extreme 802.11n/Gigabit, my MacBook Pro running 10.4.11 keeps losing its network connection between sleeps, so that when it wakes up, it gets a 169.254 address, and I can't use the Internet. It stays connected to the Airport network, but just can't get an IP. I've tried turning Airport off, sleeping again etc., but the only remedy that works so far is to reboot.
My other two machines, a MacBook and an iMac, both running 10.5.2 have not had this problem at all since the upgrade.
Any ideas? Thanks for any help - this is getting really annoying...

I think this is an issue with mac book pro Airport.
I'm not 100% on it though, but occasionally i get periods that WHENEVER i am connected to a wireless network, when my computer goes to sleep and wakes up again, the airport can connect to the wireless environment, but will not get an address, hence rendering useless.
I get the problem at work (airport extreme) and at home (netgear 'n' series modem/router). Everyone else at home is doing fine with the wireless setup, and so from knowing the situation arose in bothe environments, i put it down to the wireless enabler/ airport in the mac book pro.
(At least if you are using airport base stations, you can connect airport utility and restart it via software).
i notice that my comparable issue is nothing do do with leopard, airport extreme firmware update. but the symptoms are similar.
I will post again if i find anything further

My updates are showing i have 2 apps to update but wont connect to show what apps need updating just goes to a blank screen can anyone help

My updates show i have 2 apps to update but when entering the app store and clicking on update it goes to a blank white screen and wont load.
I have reset my wifi so its not that i have also tried it on a different wifi can anyone help please

iOS 4.2.1 is the final version of iOS that an iPhone 3G will run, so you will not be able to use any apps that require iOS 4.3 or later. There is no way to get any later version of iOS onto your iPhone without serious hacking, something we cannot discuss here.
You do not get the option to update iOS directly from an iPhone until you have iOS 5 or later.
Regards.

HPC8180 Printer wont connect to wireless network, after firmware upgrade to Wireless Router

My HPC8180 has been connecting wirelessly since I bought it sometime ago. I recently had to upgrade the firmware on my Netcom NB9W wireless router and since then my HP wont resolve to the wireless network.
I run the Wireless Network wizzard on the printer, select the correct SSID and enter the WEP key as per instructions.
It then will not connect.
The summary I print out says it passes everything except:
No Filtering = Fail
Connected = Not Run
Signal Strength = Very Low (which is strange because it's about 10ft from Wireless Router).
Other networks detected matching your network name (SSID) = No
Summary says:
Network Name (SSID) altnet (correct)
IP Address = Not applicable
Configuration Source = Not applicable
Communication Mode = Infrastructure
Authentication Type = Open System
Encryption = 64-bit WEP
I have NOT turned on mac address filtering
Any ideas??
This question was solved.
View Solution.

Your router appears to be a DSL modem router. Those can be tricky to connect to. Also, WEP can be problematic and is no longer a good security measure. WEP can be broken in about 10 minutes with freeware from the internet.
Let's do three things:
1. Change to WPA or WPA2 encryption. You can make up your own password. Make it 13 or more characters, numbers and letters, upper and lower case.
2. Reset the Network Defaults in your printer (Setup > Network area).
3. Attach to the router in this way:
Sometimes DSL providers have more control over the router than the printer likes.
- Unplug the telephone line from the router
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the device (Wireless Setup WIzard)
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- On that screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank
- Finally, plug in the phone line, reboot the router and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My ipod wont connect to my wifi after ios5 update

Hi everyone,
I just got a 4th gen iPod, and I had trouble setting it up because it couldn't connect to my wi-fi connection. I had to set it up through iTunes instead.
When I go to the Wi-Fi screen in Settings, pick my network name and enter the password, the Wi-Fi icon shows at the top of the screen but there is no checkmark next to the network name in Settings. It still shows the loading wheel, and when I open Safari it tells me that it can't load pages because it cannot connect.

- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Airport Express doesn't connect to wireless network after firmware update

Hi,
I just updated the firmware on my Airport Express to 6.3 and now it will no longer join the network. I have tried reseting to the factory defaults and Airport Utility accepts all the information and shows the unit with a green dot next too it. However, the unit is still flashing amber and in the final step where the Utility tries to save the configuration the update fails and I get the following error message:
An error occurred while reading the configuration.
Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753).
I am using an old style AirPort Extreme as a base station.
Can anyone help?

Wow, really no suggestions yet? This is a first for me, on the Apple Discussion boards!
Can anyone help?

My iPod got wet, I put it in a bag of rice for 4 days now the Ipod Works in my music player dock, but wont connect to pc and wont work on its own.

My iPod got wet, I put it in a bag of rice for 4 days now the Ipod Works in my music player dock, but wont connect to pc and wont work on its own.

Greetings Socs4bill,
It seems your iPod has been exposed to liquid and is not operating properly. Based on the information you have provided, it appears your iPod needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

HT4061 my phone failed to update and now only shows symbols to connect to itunes but wont connect. suggestions?

my phone failed to update and now only shows symbols to connect to itunes but wont connect. suggestions?

Put the device in DFU mode (google it) and restore.

Zen Vision M wont connect to my PC after i've formatted my PC & reloaded Window

Hi.
My Zen Vision:M wont connect to my PC after I formatted my PC & reloaded WindowsXP.
Before this it was Ok. Now, when I plug in the usb it detects the player, but the drivers WILL NOT load. It shows up in system--->device manager--->? driver not installed.
I've tried,
-removing creative installation software (which came with the player)& re-installing..
-updating my systems BIOS & USB drivers.
-running regedit & ticking 'allow read' in USB's (as explained in creative troubleshooting)
-turning off my firewall.
I connected it to my sisters computer running Xp & it connected without problems.
Why wont it connect to mine
Jason

OK now, I am not the smartest computer dude and this is not the magic cure but it did fix my problem with WMP0 and Creative software not noticing the player and the driver having issues. I was also having issues with a new external hard dri've.
I tried everyhting to fix this thru creative support which did respond to all my inquiries thru email, but nothing worked. I mean nothing. Reinstalling software, WMP0, manually searching for drivers, deleting USB ports so Windows could reconfigure, pulling out all USB peripheals except mouse, BIOS settings and updating drivers on motherboard.
Now here is how I fixed the problem:
I bought a new USB 2.0 PCI card to stick in my motherboard from NEWEGG for 8.99 plus 5 bux shipping. It was a wing and a prayer, it was plug and play and so easy to set up. It auto noticed without having to install drivers, even though a NEC chipset driver set was availbale on the disc provided. It noticed it and said I was good to go. I was still apprehensi've upon plugging my ZEN in , but saw stuff I hadn't seen b4 then went to WMP0 and There she was saying lets play. Creative noticed it tooo and starting DLing tunes.
My external hardri've works great now tooooooooooo.
It was a SYBA USB PCI 2.0 card on NewEgg.com and it got here in 4 days. 4 external and internal port and is 5 star rated by over 60 revieewer that bought the product. If this does not work u are only the 5 percent restock charge and so all u would lose is about a dollar.
Please let me know if this is of any help for anyone out there. <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-very-happy.gif" width=6 border=0>
And no I do not work for SYBA, but just so happy that I finally got all my stuff to work. Seems a lot of people out there have the same exact problem as I did.

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ????

Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home. After software updates, Apple support suggested I reboot my router which works. But now I have to do it every other day. ???? AT&T my DSL carrier suggests I get a new router. Apparently the one I have is really old and doesn't support my Macbook Pro. Does this sound right?

If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
One for entering into devices, computers etc for Internet Access Only.
You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
Also if you give out the password to another, they can't hack the network with the guest access password.
Computers remember the internet password, so anyone with access to your machines or network will have the password.
Since you have another Admin only password, they can't hack in. got it?
You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
Good luck.

Im trying to download the Io6 update but my connection is too slow and the update is too big is there another way to download the update?

Im trying to download the Io6 update but my connection is too slow and the update is too big is there another way to download the update? Any ideas or help and what can i do? The update starts again if it is paused

Use your friend's internet to update.

Can't connect to wifi network after iOS update

Can't connect to wifi network after iOS update.

This does not work in my case.
Situation: we have wifi at home using WPA encryption.
The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
Now things stopped working again. Resetting network settings did not help either.
The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

My ipod touch is frozen on the connect to itune screen after an update

My ipod touch is frozen on the connect to itune screen after an update. What do I do to solve the problem. The power on-off button does not permit me to reboot the system.

The BOLD may be necessary
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Imac find wireless but wont connect!

As the subject states...i recently purchased an imac G5 from a friend, he wanted rid and i got it for dirt cheap; so figured id make most of a bargain!
Anyway while setting up the computer and ridding it of all his rubbish etc i tried connecting to my household wireless network, the computer found the network but wouldn't connect to it and gave me the following message
"There was an error joining the AirPort network "MadHouse""
I know that the wireless network works fine as i can connect my Nokia N8, Blackberry Curve, Nokia N900, Ipod Touch, MacBook, and another 5 windows based laptops succesfully!!
Any suggestions as to why it wont?

try reinstalling the OS on the mac. if that's not possible try connecting the mac to your router by using an Ethernet cable. if you are able to get it to connect to the internet try to update it.
if it still dosent work then, as the last resort, you will have to reinstall the IMAC G5's operating system. do not install the one that supports intel or it will not work on your imac g5.

Satelitte L50-B-1DZ: BT is paired but wont connect to android device

I have Just bought a brand new toshiba Laptop with win 8.1
Satelitte L50-B-1DZ I have got the bluetooth on
And have even added and paired 3 devices to it Sucsesfully.
Phone android huawie assend 300Y tab android and a samsun music centre.
The bluetooth connects fine with the Music centre.
But not with the android phone or tab
It just wont connect, I have checked the phone and tab are visible Etc.
I'm hearing lots of rumors of 8.1 problems
With drivers who have upgraded from 8 etc.
I have managed to do a driver check from device
Manager and it says the best most up to date
Are installed.
But do i want to be messing so deep into this
On a brand new laptop bought with windows 8.1
Is it worth taking it back to pc world an tell / show them
The pronlem for them to get it going.
As they will be more IT savie than me.
Has anyone else had this problem ?
Is it an android thing?
I'm due a new phone soon i could poss
Get a windows one next if this will connect ?
thanks nikki

Hi
Check please my thread about BT functionality. I have tested it with my android mobile phone.
Please test BT functionality sending some files in both directions even if mobile phone is lised in Win as not connected.

CM2320fxi fax dials but wont connect or answer intermittently after firmware update

Similar Messages

Maybe you are looking for