CM25 Sequence Number Maintenance View

Dear guru ,
i enter sequence number operation in the specific view of CM25.
In the sequence number maintenance view the production orders are sorted in order of production order number.
I want that production orders are sorted in this view in order of sequence number operation.
How can i do this ?
Thanks in advance.

I assume that you want to display the sequence number of each order in the mid and lower graphic panel, is that ?? And be able to sort order based in this field ?
Try this
Customizing
Production Planning
Capacity Leveling - Transaction: OPD0 : Overall profile
Go to list Profile: SAPSFCI001
Goto Profile for list variant: SAPSFCD001
Check also the profile for evaluation;
Subprofile for displayed fields: SAPSFCF0
Subprofile for sort criteria: SAPSFCS0
make the required changes, adding Sequence as field
I would suggest to create a complete set of new Z profiles.
Regards

Similar Messages

Capacity Leveling in CM25 by Sequence Number in Planned Order

Hello Gurus,
I am having an issue with dispatching planned orders using tabular form. We have to use the tabular form in order to be able to have our program select all planned orders.
I have been testing and testing this trying to get it to work. We have sequence numbers defined for our planned orders in the PLAF-SEQNR field. When entering CM25, we are wanting to dispatch all of our planned orders at once and have them dispatched in the correct order by sequence number. I have the Strategy Profile defined for Finite Scheduling, Plan. direction forwards, and no closing of gaps. and I have my Dispatch Sequence layout key defined to only use the Sequence Number in the Planned Orders.
We need to use the tabular form so we can select all planned orders. I set up the requirements grouping to only include planned orders that are not yet dispatched.
When I use the graphical form instead of tabular and I manually highlight all of the planned orders and dispatch then they are all in the correct order with all of the gaps are closed...which is what i want.
However, I need to be able to do this using the tablular form. No matter how I try to set up the strategy profile, it doesnt seem to work using tabular form. They are dispatched according to start date with gaps in between the orders.
Any help is greatly appreciated.
I also have the following defined in Strategy Profile for Dispatching Control:
Sort operation to be dispatched
Consider operation sequence in the order
Midpoint scheduling
Thank you.
Edited by: Kevin Gorman on Jan 14, 2009 8:19 PM
Edited by: Kevin Gorman on Jan 15, 2009 3:26 AM

Hi Vishal,
I hope the below link will provide you need full information:
http://help.sap.com/saphelp_470/helpdata/en/8a/a5a7674adc11d189740000e8322d00/content.htm
Hope it clears your doubt.
Regards,
Madhu.G

Create Auto increment sequence number for list view report

Hi All,
Am using BAM 11.1.1.6 version, Have updating list report & wants to create auto increment sequence number at report level. Is it possible to create column at run time in BAM reports.
Please help.
Thanks.

Hi All,
Am using BAM 11.1.1.6 version, Have updating list report & wants to create auto increment sequence number at report level. Is it possible to create column at run time in BAM reports.
Please help.
Thanks.

Aotu numbering in table maintenance view

Hi experts,
Can anybody help me in auto genereating serial number in table maintenance view. I have created table maintanance view for a z table for which first field is serial no. The requirement is this serial number should be auto genereted. increment by 1. I have writeen the code for the same in PAI event, but it getting incremented by number of rows. e.g for secind row counter is incremented by +2. for thrid row it is +3 and so on....
plz help to achieve consistency .
Thnks n regards,
Ashmita Singh

What happens if the user deletes a recird from the table?
Suhas,
Happy New Year
Disable delete function and provide a deletion indicator. This should be fine right.
The problem would be when the maintenance dialog is regenerated.
@OP - So as suggesgted use events.
Similar threads were discussed before many times. May be you culd search it once.

Activate Delimit in Table maintenance view

Hi,
I am creating a maintenance view for a custom table which has begin and end dates as part of the key fields. I want to activate the Delimit functionality on SM31 so we can have a history of the changes. Do you know how to activate this option? Please help!
Thanks, Chuong

It is not possible via SE11 . in SAP HR you define u201Ctime constrain u201C in table u201CV_T582Au201D for all ITs . If I want to do something like this , I will probably look at module pool logic of any IT .
Thanks,
Saquib Khan
FYI
Time Constraint
A time constraint indicates whether more than one infotype record may be available at one time. The following time constraint indicators are permissible:
o     1: An infotype record must be available at all times. This record may have no time gaps. You may not delete the record last stored on the database because all records of this infotype would otherwise be deleted.
o     2: Only one record may be available at one time, but time gaps are permitted.
o     3: Any number of records may be valid at one time, and time gaps are permitted.
Other possible time constraint indicators are as follows:
o     A: Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
View V_T582B Infotypes Which are Created Automically controls whether the system automatically creates the infotype record for an employee hiring or an applicant data entry action.
Infotypes with time constraint A may not be deleted.
o     B: Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
Infotypes with time constraint B may be deleted.
o     T: The time constraint varies depending on the subtype.
o     Z: Refers to time management infotypes. The time constraint for these infotypes depends on the time constraint class defined in view V_T554S_I Absence: General Control. Collision checks are defined in view V_T554Y Time Constraint Reaction.

Maintenance View issues with an ABAP program

Hi,
I need to update a Maintenance view(V_JURIC) from a txt file. I created an ABAP module to do this and when I update the tables that compose the view(TABLE_A and TABLE_B), the view is not completely getting updated in the last field. Any suggestions? Here is sample of the code:
REPORT zbr_loc_mast_data_1 MESSAGE-ID fb.
TABLES: j_1btxjurt,
 j_1btxjur.
DATA wa_j_1btxjurv TYPE j_1btxjurv.
DATA wa_j_1btxjurt TYPE j_1btxjurt.
DATA wa_j_1btxjur TYPE j_1btxjur.
DATA: BEGIN OF i_j_1btxjurt OCCURS 2000.
 INCLUDE STRUCTURE j_1btxjurt.
DATA: END OF i_j_1btxjurt.
DATA: i_j_1btxjurv LIKE j_1btxjurv OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF rec OCCURS 0,
 tbl_name(10) TYPE c, " Table name(Constant 'J_1BTXJURV')
 field_2(1) TYPE c, " Constant "X"
 jur_code(10) TYPE c, " Jurisdiction code
 municip(60) TYPE c, " Municipality Name
END OF rec.
DATA: w_num_recs TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
PARAMETERS: in_file TYPE localfile OBLIGATORY
 DEFAULT 'C:\lista de municipios.txt'.
SELECTION-SCREEN END OF BLOCK block1.
START-OF-SELECTION.
PERFORM read_file.
IF sy-subrc = 0.
 PERFORM update_table.
ENDIF.
END-OF-SELECTION.
*Summary
 WRITE: / 'Number of records read: ' COLOR COL_TOTAL INVERSE OFF INTENSIFIED ON,
 32 w_num_recs COLOR COL_POSITIVE INVERSE OFF
 INTENSIFIED ON.
* Form read_file
* text
* --> p1 text
* <-- p2 text
FORM read_file.
DATA: l_filename TYPE string.
MOVE in_file TO l_filename.
CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = l_filename
 filetype = 'DAT'
* HAS_FIELD_SEPARATOR = SPACE
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* VIRUS_SCAN_PROFILE =
* IMPORTING
* FILELENGTH =
* HEADER =
 CHANGING
 data_tab = rec[]
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 not_supported_by_gui = 17
 error_no_gui = 18
 OTHERS = 19.
IF sy-subrc <> 0.
 MESSAGE e039 WITH in_file.
ENDIF.
ENDFORM. " read_file
* Form update_table
* text
* --> p1 text
* <-- p2 text
FORM update_table.
CLEAR: w_num_recs,
 w_num_recs_btable,
 w_num_recs_atable,
 w_num_recs_inserted.
 LOOP AT rec.
 w_num_recs = w_num_recs + 1.
 MOVE 'BR' TO wa_j_1btxjur-country.
 MOVE rec-jur_code TO wa_j_1btxjur-taxjurcode.
 MOVE 'PT' TO wa_j_1btxjurt-spras.
 MOVE 'BR' TO wa_j_1btxjurt-country.
 MOVE rec-jur_code TO wa_j_1btxjurt-taxjurcode.
 MOVE rec-municip TO wa_j_1btxjurt-text.
 INSERT into j_1btxjurt values wa_j_1btxjurt.
 IF sy-subrc = 0.
 COMMIT WORK.
 ENDIF.
 INSERT into j_1btxjur values wa_j_1btxjur.
 IF sy-subrc = 0.
 COMMIT WORK.
 ENDIF.
ENDLOOP.
ENDFORM. " update_table
Edited by: Thomas Zloch on Nov 5, 2010 9:24 AM - please use code tags

MOVE 'PT' TO wa_j_1btxjurt-spras.
maybe change that to:
MOVE 'P' TO wa_j_1btxjurt-spras.

Reg :-maintain a table maintenance view for the z table.suggest me the code

i have question.i have created a z table related to pp module.the requirement is to maintain {table maintenance view} for this z table.how could this be done.can any one suggest me the code for this?

Hi ,
We have a lots of queries on table maintainance creation in the forum posted and replied to.Pls have a look at it first.
In se11 -> change mode of the ztable -> goto -> utilities -> table maintainance generator -> click on it...
it will give a new screen-> enter the required details like function group , authorisation(use &NC& or leave it blank if you dont know) and screens
2 step and 1 step means=> number of screens displayed in maintainace
if step1 is selected then we have a screen which will be like a table control for data entry.........
for step2 we have a table control screen and a more detailed individual field display as second screen
click on the button 'find screen numbers' so that system automatically proposes the screen numbers
after which click on the "create" button and follow the required instructions/messages
once done go to SM30 enter the table name to check if maintainance has been created properly
Hope it helps,Pls check and revert
Regards
Byju

Maintenance View for checktables

Hi,
I had a scenario where I had to create around 30 check tabels(Z Tables). I have to create maintenance view for these tables. Instead of creating 30 transactions is there a better way to do this.
If I create a report for this purpose with radio buttons in the selection screen for each table, can I call transaction SM30 and pass the table name, skip the first screen and do the entries.
Thanks,
Viswas

Hi,
There is no need to go for call transaction
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
 EXPORTING
 ACTION = 'U'
 VIEW_NAME = 'ZTAB'
 TABLES
 DBA_SELLIST = IT_RANGETAB
 EXCEPTIONS
 CLIENT_REFERENCE = 1
 FOREIGN_LOCK = 2
 INVALID_ACTION = 3
 NO_CLIENTINDEPENDENT_AUTH = 4
 NO_DATABASE_FUNCTION = 5
 NO_EDITOR_FUNCTION = 6
 NO_SHOW_AUTH = 7
 NO_TVDIR_ENTRY = 8
 NO_UPD_AUTH = 9
 ONLY_SHOW_ALLOWED = 10
 SYSTEM_FAILURE = 11
 UNKNOWN_FIELD_IN_DBA_SELLIST = 12
 VIEW_NOT_FOUND = 13
 MAINTENANCE_PROHIBITED = 14
 OTHERS = 15.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
aRs

Maintenance view problem "No data maintenance Authorization; Display only"

Maintenance view problem
Question 1>>>>
> I have created a table with Display/maintenance allowed and technical setting Data class - APPL0 (master data, transparent tables).
>> Then I have created a maintenance view thought utilities->table maintenance generator where i have specified the Authorization group as &NC& (w/o auth. group)
->and also created a function group and specified in the maintenance screen-> I have selected maintenance type as one step-> i have given the overview screen number->and in Recording routine i have selected - no, or user ,recording routine.
>>> Now when i go to transaction SM30 and put the table name and press on maintain button I get a information box saying "No data maintenance Authorization; Display only".... and it only displays the data.
my problem is I want to enter data through maintenance view (SM30).
2nd Question >>>> once i create a function group for maintenance view how can i assign a transaction for this. (as if i do it as we do for a module pool program it gives me error)Thank you.
kailash

SE93. Enter a transaction name. Create. In the pop up enter a title and select 'Transaction with parameters'.
Next screen fill the following;
Transaction 'SM30'
Check 'Skip first screen'
In the table control at the bottom of the screen
Name of screen field 'VIEWNAME'
Value <your table name>
Name of screen field 'SHOW'
Value 'X'
Save.
Job done.

[Maintenance View] Mass maintenance of Z-Table

Hi,
I was wondering what were the options when dealing with mass maintenance of Z-table entries.
SM30 is OK for maintenance view but you cannot process more than a given number of lines (34 entries or so) per page.
Ideally, it should be possible to enter data from Excel file of even clipboard.
SE16N is great for this since it allows pasting of clipboard data but it does not work with maintenance views (it switches to the SM30 dynpro).
Besides, if I create a database view, it is not possible to save entries because it joins several table together (even if I only need additional fields for display only).
I tried the FM 'SE16_INTERFACE' but it dumps with an CX_SY_DYNAMIC_OSQL_SEMANTICS error (SAPSQL_NO_DBTAB_OR_VIEW). (you can only query table or database view but no maintenance view)
Thanks in advance for your ideas/advice.
Best regards,
Guillaume

Hi,
Developing a generic tool won't take much time probably 6 hours at an experience level of 2+ years!!!
Once you develop you can use it for ever.
What all you need to do is create a field-symbol of type standard table. Get the table name and the file from the selection screen.
Create a dynamic internal table with reference to the table name entered in the selection screen. Upload the data and update the database.
Limitations in the design:
1. File should be in correct format and with the correct data. (Specific validations can't be done)
2. Table maintenance events can't be tackled.
eg: On entering the material number, Material description should automatically come.
Creating BDC for SM30 is ok. But this works only at a table level. We may not be able to make it generic as the screen field names changes based on table name.
So think and choose the right approach!!!
All the best:)
Thanks,
Vinod.

Table maintenance view problem

Hi. I'm trying to generate a table maintenance view for a custom table, and I keep getting an error message. I go into the table maintenance view generator and fill out the fields. I'm selecting a function group that has ZHR0 as the development class (which is correct). Then when I click on the create button a screen pops up with the workbench request number. When I click on the continue button, I get the following error message: "The maintenance object description has no transportable class." If I click for more information, this is what it says to do: "Either assign the maintenance object description for object ZTS_ADJST_REAS to acorrectable development class, or assign the table forthe generation of the maintenance module to a function group with non-correctable development classes." Apparently the maintenance object description somehow got assigned to temporary class $TMP. Where do I go to change this?
Thanks,
April King

Hi April,
You can use standard program RSWBO052 to change the package. Enter the object and mark the checkbox -> Execute -> Place the cursor in the object -> Right click mouse -> Reassign -> Enter new package -> Save.
or you can go to transaction SE80 -> Select Package -> Enter &TMP -> Hit Enter -> Find your object -> put the cursor and right click -> Other functions -> Object Directory Entry -> Change -> Change the package -> Save.
Hope this will help.
Regards,
Ferry Lianto
Please reward point if helpful.

Maintenance view with MARA joined twice

Hello,
I have a Z table which contains 2 fields containing material number, say: MATNR_1 and MATNR_2. Both have foreign keys pointing to MARA table.
Now I'd like to create a maintenance view for that Z table which will contain texts for both of those matnr fields, taken from MAKT table. So I need a maintenance view which has that Z table as the main table of the view and MARA+MAKT tables joined twice: first for the field MATNR_1 and next for field MATNR_2.
It looks like it is impossible to achieve by just clicking in SE11 - the system takes only the first matnr field into account (MATNR_1) and joining MARA for the second time (for field MATNR_2) seems not possible.
Has anyone an idea how to achieve this ?

I found a solution myself - actually a workaround, here it is if someone is interested:
You can have data from a secondary table (a table that you cannot join by defining the view) filled "manually" at the screen level. When you generate a maintenance objects with the maintenance generator, modify the generated screen by adding a new field to it (for data that you need to be displayed). In PBO of that screen call your additional PBO module which just reads the data from the db table (or from anywhere you want) and fills that field.
You can check standard transaction FI12 to have an example: field BNKA-BANKA is filled exactly with this technique (see PBO of that screen).

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

Hi experts, how to use open sql to read data from one " maintenance view"?

i want to use this part of data within report ,so how to use open sql statement to read data from one " maintenance view"?

Hi
You can't use OPEN SQl statements to fetch data from maintenance view
You have to use only Database views
see the different types of views and the difference
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Reward points for useful Answers
Regards
Anji

File sequence number in a Flat file

Hi,
I am working on Idoc to file scenario wherein my output file will have a sequence number assigned to each level.
there are 4 levels and hence 4 sequence number to be genearted and its values should also have the same sequence number.
i am doing this just by using Counter function.
But when i am getting a multiple detail records, for each detail record(0040) level its keep incrementing.but it should have the same value what its level has.
for ex:
ALPHAMER AS2 E5 710 20114806124829 01.00
0000 00000000 20100102 V3.0 SORD CZ1
0010 00000001 76767 123 100 WER Constant BNG 560011 RAJ WERR     560011    BTM   X EN RT
0020 00000001 TYUIOP
0040 00000001 8765 6532 200 45 10 WE 20 AG
0040 00000002 8765 6532 200 45 10 WE 20 AG
0040 00000003 8765 6532 200 45 10 WE 20 AG
0040 00000004 8765 6532 200 45 10 WE 20 AG
9999 99999999
It has to be like this.
ALPHAMER AS2 E5 710 20114806124829 01.00
0000 00000000 20100102 V3.0 SORD CZ1
0010 00000001 76767 123 100 WER Constant BNG 560011 RAJ WERR     560011    BTM   X EN RT
0020 00000001 TYUIOP
0040 00000001 8765 6532 200 45 10 WE 20 AG
0040 00000001 8765 6532 200 45 10 WE 20 AG
0040 00000001 8765 6532 200 45 10 WE 20 AG
0040 00000001 8765 6532 200 45 10 WE 20 AG
9999 99999999
Can someone help me in achieving this.
Regards

Hi there,
Just to try out from a different view, the following case could be implemented if the pre-requiisites are satisfied:
Pre-requisites:
1) The element that carries a primary factor, let us say, '8765' from your example.
2) Functionally there is an element in your header item that relates the line items under it.
My understanding of your example:
1) Line items present for 00, 10, 40
2) Line item 30 absent in the series
Proposal:
Map source field (the one that is arelating factor, here the one that carries '8765') -> INDEX (start by 0, increment by 1) -> multiply by one.
INDEX standard function property: Donot Reset for every context;
Srikanth Srinivasan
Edited by: Srikanth Srinivasan on Jan 10, 2011 11:02 AM

CM25 Sequence Number Maintenance View

Similar Messages

Maybe you are looking for