CM25 : settings of strategy profile

Dear
I have a question about the settings of CM25 strategy profile.
I need to activate the functions : set up time optimization , reschedule with production version and change production version on error.
With these settings the system can run when dispatch the planned orders a set up time optimization and simultaneously a rescheduling with available production version ?
Thanks for you help.

Hi,
you can make temporary settings for strategy profile in CM25 itself and check if it works as you expect.
If it works successfully you can configure a new strategy profile in custimizing and add it to overall profile which can be used by CM25.
Chweck and revert,
Santosh Sarda

Similar Messages

  • Strategy profile and Heuristics

    Hi,
    Could you please brief me on Strategy profile and its impact on planning, and what is its relation with Heuristics in planning?
    Thanks,
    Pra

    Hi,
    Strategy profile is there in heuristic as well as in planning run and in DS board.
    1. For older version of SAP  (not sure I think upto 4.0) you set indicator use setting from heuristic  in heuristic settings. but in higher versions settings for heuristic are used .
    2. For reschduling orders you can give strategy profile in plaaning run also.
    3. In DS board strategy settings are used while useing rescheduling function.
    it is get grouping different strategy and sequence of using same.
    Siddharth.

  • What is the provisioning feature in the settings under, general profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3

    What is the provisioning feature in the settings under, general>profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3

    A profile is used on iOS device to add specific settings and similar things to an iOS device.  Tryically, they are added when the iOS devices is controlled by a company or school.
    However, some apps install a profile. If your iPod is not controlled by a company or school then it seems an app added the profile. You can good the title if the profile and see if that gives any info.

  • Getting error reading settings with service profile manager. Why and what can I do to solve problem?

    Getting "error reading settings" with the service profile manager in Lion server OS. Why and what can I do to solve problem?

    I have also had the 'Error reading settings' problem in Profile Manager, despite trying everything in the discussions and clean reinstalls (which work for a little while only).
    It seems that various different fixes work for some people but not others; and the underlying cause of the problem has not been resolved.
    There are now numerous threads on this problem (there are yet others with similar problems):
    https://discussions.apple.com/thread/3189397
    https://discussions.apple.com/thread/3195100
    https://discussions.apple.com/thread/3212015
    https://discussions.apple.com/thread/3208533
    https://discussions.apple.com/thread/3249062
    https://discussions.apple.com/thread/3199734
    https://discussions.apple.com/thread/3212304
    I have posted this in each to try and pull things together a bit.
    Does anyone know if Apple has acknowledged the issue and offered an official response?

  • "Your current color settings discard CMYK profiles in linked content" error message

    I keep getting the following error message:
    "Your current color settings discard CMYK profiles in linked content but profiles were set to be honored when this document was created."
    every time I open an Illustrator document. I have no idea how this setting was set and no idea how to turn it off. I am just using the standard N America Prepress color setting in Bridge.
    I have tried opening new documents using the supplied Ai CS4 new document profiles, no luck. So I am assuming it's a pref that is set in the app itself, yet I have no idea how to change this setting? I don't even see anything referring to a setting like this.
    I found this archived discussion: http://www.adobeforums.com/webx?128@@.59b58d84 which had no resolution. Thought I would throw it out there again and see if anyone has been able to fix this. It drives me insane having to deal with that error every time I open a saved document.

    To disable the alert via scripting you can use the following line:
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
    Put it in a function with null return and call the fuction where you want to supress any error dialog.
    Mind you this would supress all the alert dialogs of the Illustrator App. 

  • CS3: "Your current color settings discard CMYK profiles..." warning!?!?

    Why am I getting this error?
    My file contains two CMYK colors, nothing else?
    Saved .ai WITH color profiles...
    Thanks,
    Kristin.
    "Your current color settings discard CMYK profiles in linked content but profiles were set to be honored when this document was created."

    actually, it means exactly what it says.
    When the document was created, whether by you on your machine, or by someone else on another machine, or the various possible permutations thereof, the document was initially saved with profiles of linked files set to be honored. Now you are working on it with your color settings set to discard profiles on linked files.
    If you don't have any linked files, this won't affect anything with this file.
    The way you have it set up now is generally the preferred way.
    If you want to get rid of the warning, copy everything out of this file and paste it into a new file. Work on the new file from here on out.
    Doing a "save as" might work, I've never tried that.

  • Your Current color settings honor CMYK profiles in linked content but profiles were set to be ignored when document was created

    "Your Current color settings honor CMYK profiles in linked content but profiles were set to be ignored when document was created"
    I keep receiving this message on my illustrator files. They are linked to a file in Indesign that when saved as a PDF prints the wrong colors. I have been trying to fix this for two days. I have look online for answer in forums and articles and nothing works i am completely burn out, lost and angry Please help. This is a Picture book project that can not to sent to the author in this condition.

    Your Illustrator files have images linked in them?
    THis message tells you that color management had been set up differently when you created the document. In color management settings you have the choice if color profiles in linked images are ignored (and Illustrator uses just the CMYK numbers) or if those profiles are honored (and Illustrator converts the CMYK numbers according to the image profile and your settings into the Illustrator document's color profile).
    What makes the whole thing even more complicated is that you placed the thing into InDesign.
    So there might be 4 different color profiles interacting with each other:
    1. the linked image's profile
    2. the AI document's color profile
    3. the InDesign document's color profile
    4. The export profile in InDesign.
    Is your color management set up and synchronized in Photoshop, Illustrator and InDesign?
    Is it possible to place the images directly in InDesign? That is: create vector content in Illustrator and have photos separately? Then combine them in Illustrator?
    How do you know they print the wrong colors? Just seeing them on your monitor won't tell you, unless your system is correctly color calibrated.

  • Make Settings for Skills Profile Service

    Hi SAP Gurus,
    I want to make the settings for Skills Profile Service in IMG. The documentation says "Switches QUALI DEST1 and QUALI DEST2 allow you to set up the system ID required for the RFC connection for ESS. "
    How can I find out the required system ID?
    Thank you in advance.
    Best regards,
    Nadin

    hi p gopala
    Go to IMG -> Cross-Application Components -> Homepage framework -> Resources -> Derfine Resources -> (Add Entries)
    Double Click on Resource object "EMPLOYEE_SKILLSPROFILE_SERVICE".
    Under URL of PCD page, you will find
    ROLES:// portal_content/com.sap............
    Delete this line and replace it with following..
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.ess.employee/com.sap.pct.ess.roles/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.employee_self_service/com.sap.pct.ess.area_career_job/com.sap.pct.ess.serv_career_job
    save your entry.
    Customizing request is created.
    Release this request from 'SE09'
    Restart the J2EE server.
    Regards,
    Kaushal

  • CM21 Strategy Profile with Setup Optimization but consider the requirements

    Dear guru.
    A question about strategy profile in CM21
    The system Is able to execute an automatic dispatch that optimize the setup time of the production order but also consider the requirements date in order that the production orders dispatched can cover the requirements without delay ?
    Thanks In advance

    Dear ,
    The system Is able to execute an automatic dispatch that optimize the setup time of the production order but also consider the requirements date in order that the production orders dispatched can cover the requirements without delay ?
    To answer to your query I would rather say that any operation  under an work centre have Execution time =Set up time +Processing Time +Tear Down Time  and also Inter operation time -Que time , Wait Time , Move Time .
    Now when you dipatch the operation in CM21 , it cheks the available capacity on that date  and also compare with the total operation timimngs within schedule start and schedule finish date  and then dispach automatically if work centre is not overloaded otherwise it will pop up with a Scheduling Logg or else it will appear with an window that will show u Date , Work Centre , Operation , timie so that you can change according to WC load n availablity in alternate date .So In the strategy prfile if you click Display dates while dispatching u can obseve the same .
    Now total  production order schedule start and schedule finsihe date will be considered and it will automatically chage as per the WC availabli capaciy while automatic dispatch .But u need to SAVE that to observe the changes in CM21.
    Hope it is clear
    Regards
    JH
    Edited by: Jiaul Haque on Jun 17, 2010 3:58 PM

  • Table Required for strategy profile in apo

    any body suggest me the table for strategy profile (SAP004) in sap apo .
    Edited by: avenkatrao on Jul 7, 2010 12:11 PM

    check /SAPAPO/FCST_56
    for more details search for table in se11 with /SAPAPO/*

  • Is it possible to change proxy settings for all profiles that´s created instead of the standard options. We need to change "use systems proxy" into "automatic"

    Proxy Problems
    We need to be able to change the default settings for the proxy for all profiles on our computers that´s created for new users.
    Standard is that firefox takes the option "use the system options" for the proxy. We would like it to use the option "automatic" instead like IE and Chrome does.
    Considering that we have over 500 computers doing this manually isn´t an option, because a new profile is created everytime someone logs on to a computer they haven´t used before.

    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new default values.
    Place a file local-settings.js in the defaultspref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    *http://kb.mozillazine.org/Locking_preferences
    You can use these functions in mozilla.cfg:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    This will work for all existing and newly created profiles.

  • Adobe Camera Raw Save Settings and Lens Profile Corrections Help

    I have been fooling around with Adobe Camera Raw’s (ACR) ability to save settings so that I can apply them to other images. I’m able to set things such as clarity, vibrance, camera profile etc. What I want to do is enable Lens Profile Corrections and have it automatically detect the lens information for future images, apply no distortion corrections and apply vignetting and chromatic aberration corrections. However, when I try this, the Lens profile sticks on “Canon EF 24-105mm f/4 L IS USM” (which is what I used for creating the settings to be saved) regardless of the lens used for the image that I am applying the settings to. Is there a way do this?
    I’m using Photoshop CS6 and ACR current version.
    Thanks,
    Mike

    You should see an Adobe Standard profile and perhaps an ACR x.x profile for your camera, but Adobe does not make Camera-centric profiles (landscape, portrait, camera neutral, etc) for most cameras unless they are Canon DSLRs, Nikon DSLRs, one Leica and a few Pentax cameras.
    On a Vista/Win7 system you can verify what models of cameras are supported by Adobe by looking for profiles in:
    C:\ProgramData\Adobe\CameraRaw\CameraProfiles
    The lens profiles are in:
    C:\ProgramData\Adobe\CameraRaw\LensProfiles
    There are comparable directories on Win XP.

  • Need to copy my application settings from old profile to a new one

    Using Tiger
    Greetings,
    Somewhere in my last 15 months of computer usage I have somehow tweaked OS X in such a way that my mouse pointer doesn't let me click multiple times in one particular spot. I have no idea where to look to fix something like this, but just out of curiosity I created a new user profile to see if the same problem would occur. It didn't.
    So, in order to get rid of the problem, I thought I would just transfer my key application settings (Thunderbird email, Firefox, and other key apps) into a new profile that did not have this pointer clicking problem on it.
    Is there an application that will automate this process? I would need to have the ability to move all the user data from only the apps I want, so that I don't "copy" the settings that are causing my system to give me these pointer problems.
    Thanks for any help you can offer...

    Carolyn Samit wrote:
    One way to select multiple files/folders, et., is to hold down the *Shift key* while selecting with your Mouse.
    Carolyn
    Hi Carolyn,
    I think "shift" only works with contiguous files while command = Apple" will allow one to click on arbitrary files. I know it works that way in "Mail."
    Regards, JP.

  • Role Settings and Access Profiles Settings

    Hi all,
    I see from the Access profiles where we can set the level of access to particular object in CRM on Demand, for example if we take accounts.. i have given Read Only access in Access Profile and at the same time in the second step of configuring Roles i.e. Record Type Access, i tick mark Can Create,...
    so here i think there would be clash of the settings,.. which setting would be on priority in on demand... i mean which one over-rides the other..
    regards,
    Sreekanth.

    Sreekanth, step 2 of the role has priority over the access profile.

  • Where are the about:config settings for a profile stored?

    I am setting up a custom firefox profile and would like to tweak some of the options that are accessed via about:config.
    I would like to know where this information is stored and whether I am able to modify these options outside of the browser.

    Thanks, I was modifying the prefs.js file the whole time but didn't realize these were the same settings from about:config. The user.js file is also useful to know.

Maybe you are looking for