CM50 - Breakdown Hours display

Hi,
I have the following requirement at my client site.
1. In CM50 report, they want Notification No and Type. In std system, Layout has Maintenance Notification field. I have selected that filed in the report and the new coulumn displayed is "Message". (Description of the column should have been "Maintenance Notification")
Also, that column is empty, eventhough I have created Notification against Order (for that work center). Is there any setting to be done or any config required to make Notification No to get displayed.
2. Also, they want to see the Breakdown Hours against Notification in CM50 (In case if they do not have created Order No).
Is it possible?
Thnx in advance
Sam

Experts, please suggest.
Sam

Similar Messages

ICS 2.x: How do I change the hour display format from AM/PM to 24 hour mode in the JavaScript?

How do I change the hour display format from the AM/PM mode to the 24 hour mode
in the JavaScript?

To change the hour display format, 

<OL>
<LI>Open the loadpoint/CalendarServer/cal/uicust/en/main.html
file.

<LI>Go to the "Misc." section.

<LI>Edit the following line: 

i18n['def clock'] = '24';
</OL>

laugh
how analog.
neat idea, but i need to see that part of the screen after login on a fairly regular basis, otherwise i might seriously do this.

Why is the hour display set to 19 when I run the attached VI

Why is the hour display set to 19 when I run the attached VI?
Thank you.
Solved!
Go to Solution.
Attachments:
Untitled 1.vi ‏10 KB

Are you in US Eastern Time? This looks like an offset due to time zone (EST is -5 hours). Setting the UTC constant to TRUE will fix that.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Determining Hours Displayed in Day and Week View

Hi there,
Even though I have determined the Day hours to be, for example, 7am to 6pm in iCal Preferences, and I have determined the number of hours to be shown on the screen to be, for example, 11 hours, I still have to scroll down to fit my Day's hours in the view. In addition, the non-day hours (i.e. midnight to 7am, 6pm to midnight) are still being shown.
Is there any way of removing the non-day hours, and in effect the scrollbar so that on opening iCal, the correct hours as I have determined them are displayed?
Why would I want to open my Day or Week view and have at the top (what I would expect to be the first thing of my "Day") to in fact be Midnight (and go back to sleep)?
Am I missing something or does this not work the way I think it should, or thought it did?

See Fred Grieve's answer and John Maisey's solution here:
http://discussions.apple.com/thread.jspa?threadID=1868347&tstart=0

How to make the hours display in the payslip,

For one wagetype the hours are displayed in payslip, the country grouping is US. how to resolve this?
Thanks
Karthik

You mention that for "one wagetype the hours are displayed in payslip", implying that the (number of) hours are not displayed for the other WTs.
First, check in the RT if hours exist only for that WT or for all other WTs.
If hours exist only for that WT in RT, then you should check where in your Payroll Schema the hours are deleted from the other WTs (or where the hours are added for this WT), and make the appropriate corrections.
If the hours exist for all earnings WTs, then the problem should be in the Line Type that is used to display that WT in the Payslip/Remuneration Statement. Use t-code pe51 to compare that WT with a similar one, and make the appropriate correction.

Assigned Working Hours Display

Hi,
For evaluating Workforce Management, I am running transaction CM50 for specific Work Center and have followig data for this WORK CENTER -
Entries -        Rem.cap.reqs   -   Avail.capacity -   Rem.a -     Rem. avail. capaci
Total     --- ---    222,012 HR      --- ---    824,0 HR       ---    --- --- --- --- --- --- ---   601,988 HR
25.03.2011   ---          7,048 HR   ---   ---       8,0 HR      --- --- --- --- --- 88,1 ---       ---     0,952 HR
26.03.2011   ---         3,524 HR    ---   ---      8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
27.03.2011   ---         3,524 HR    ---   ---       8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
28.03.2011   ---         3,524 HR    ---   ---      8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
29.03.2011   ---         3,524 HR    ---   ---      8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
Here 222,012 HR is the Rem.Cap.Requested hours.
From CMP3 Transaction, for a employee, I am booking 3 hours daily from 26.03.11 to 29.03.2011(total 12 hours). When I am again running CM50 Transaction, these 12 hours should also add in 222.012 Hours because it's already allocated and I must see - 234 Hours updated. But I am not able to see that. Am I running wrong transaction to review the updated data or am missing something else so that I will get updated Working Hours evaluation data, everytime I allocate hours to someone. Please let me know. Shall I see some other transaction?
Thanks and Regards,
Roshan Gupta
Edited by: Roshan Gupta on Mar 25, 2011 3:22 PM

Solved by myself.
In this case, planned working hours was not changing the reports data that I illustrated above. Actual Working hour was affecting the data.
Thanks,
Roshan

ICal monthly view 12 hour v 24 hour display

How do I get time displayed as (for example) 7.20am showing on Monthly view in iCal on Lion. It shows in the event but not on Monthly view.

JEG,
Do you have iCal>Preferences...>General>"Show Event Times" selected?
Additionally, go to System Preferences...>Language & Text>Formats>Region: and set/re-set your "Region.'

Why breakdown hours is considered even notification are deleted

Dear Pal
We are facing one issue at notification. The breakdown indicator We made mandatory as at breakdown notification. This decision is made due to so many reasons. But now the issue is after receipt of breakdown notification job by maint team, they have examined and found that it was not occured. The data entered by the production persons is wrong.
So while attempting to remove the tick mark system is not accepting. How to do the same?
Also surprisingly seeing that even if you are deleting the notification , the breakdown time is considering by the system. Infact we cant do the deletion since it may has some maintenance work (not breakdown order)
Anyone come across this situation? Also have you created the Bar chart report which is available in MCI7, we need the like same as per our standards. Your inputs will be appreciable.

Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=331160]

Project homepage need hours displayed how???

HI ,
our client is mostly hour driven and would like to have reports on the project home page that are hour focussed...
it appears that everything is financial oriented budget vs actual but not hour oriented... we need to supress all $ from view but show budget to actual hours and such...
how can we accomplish this?? are those precanned reports that can be selected on the page layout editable?

AlphaSmith,
I have the same problem. Please let me know if you found a solution.

Calendar displays 24 hours versus 12 hours

I somehow inadvertinly changed my daily and weekly calendar display to 24 hours. In day or week view, there are 24 hour segments. Does anyone know how to change back to a 12 hour display?

Hi Bob
Ok Try this one, now if a time was specified, it should be used:
$SiteCode = Read-Host -Prompt "SiteCode"
$SiteServer = Read-Host -Prompt "Servername (FQDN)"
$CollectionsToChange = (Get-WmiObject -Namespace "root\sms\site_$SiteCode" -Class "SMS_Collection" -ComputerName $SiteServer | Select Name, __PATH |Out-GridView -OutputMode Multiple)
foreach ($collectionObj in $CollectionsToChange){
try{
$collection = [wmi]"$($collectionObj.__Path)"
$collection.RefreshType = 2
if($collection.RefreshSchedule -ne $null){
$interval = ($collection.RefreshSchedule)[0]
$Interval.HourSpan = 12
} else {
$IntervalClass = Get-WmiObject -List -Namespace "root\sms\site_$SiteCode" -Class "SMS_ST_RecurInterval" -ComputerName $SiteServer
$Interval = $IntervalClass.CreateInstance()
$Interval.HourSpan = 12 #Update after 12 hours
$collection.RefreshSchedule = $Interval
$collection.put()
Write-Host -ForegroundColor green "$($collection.Name): $($collection.CollectionID)"
} catch {
Write-Host -ForegroundColor red "ERROR: $($collection.Name): $($collection.CollectionID): $($_.Exception.Message)"
Cheers,
Thomas Kurth
Netree AG, System Engineer
Blog:
http://netecm.netree.ch/blog | Twitter:
| LinkedIn:
| Xing:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Calendar - Day View displays 2-hour meetings as 1-hour

Is there any way of changing the day view where currently a meeting, even though booked for 2-hours, displays as 1-hour?

Snick wrote:
Is there any way of changing the day view where currently a meeting, even though booked for 2-hours, displays as 1-hour?
Maybe I am missing something here in your question, but you are asking that if you schedule a meeting in your calendar for two hours, you want it only to display as a one hour meeting?
No, the BB calendar will display the amount of time you designate... if you book it for two hours it will display for two hours. If you schedule it for one hour, your calendar will display a one hour time block.
If you want it only to display a one hour time block, schedule the meeting for one hour.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Time display in iCal - 12 & 24 hour

Has everyone / anyone else noticed the odd display of times in the new iCal?
My system setting is for a 12 hour clock and times that are displayed with minutes (e.g. 7.30) are shown correctly (i.e. 7.30 AM or PM), however 8 PM is displayed as 20 - and not even 20.00. Times on the hour are flipped into the 24 hour clock, times not on the hour display properly. Odd. Roll on OS 10.71

Not seeing the problem on my system, been running Lion for 2 months.

Enter 24 hour times in iCal.

I use 24 hour time and I cannot figure out how to get iCal to allow me to enter times correctly. How does one do this? I can customize times in systems preferences so they display correctly but I cannot get a iCal to let me type them in.

Rob,
...but I cannot get a iCal to let me type them in.
I use the 24 hour display, and I have to use the Up/Down arrow keys when entering time information.
If that is not working for you, try refreshing the iCal plist file.
Quit iCal and find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Drag the file to your Desktop, log out/in or restart and check iCal for time entry.
;~)

KDE/calendar display changed after last upgarde.

Hi,
I'm on a fully update Arch_64/KDE.
After the last system upgrade, the calendar hour display (part of Kontact) changed from the usual HH:MM (e.g., 11:00) to 11'.
I could find where to restore tp the former format.
Please advise1
thanks

If this is your only problem with the new KDE-PIM stuff you're lucky But have you tried changing the format under settings -> "Regional & Language"?
matse

Daily Calendar Display

On PALM conputer display, how do I change from 24 hr. display to 12 hour display on calendar? I cannot find anything in 'prefrences' or 'settings'. My handheld is displaying the 12 hour format.
Post relates to: Tungsten E

Can you please be a bit more specific ?
Are you seeing the 12hr format and you want to change to 24hr or the other way around ? That is controlled via Preferences, Format, Time Format.
Or are you seeing the 12hr format everywhere else on your PDA except when in Calendar ?
Post relates to: Treo 680 (Unlocked GSM)

CM50 - Breakdown Hours display

Similar Messages

Maybe you are looking for