CMC access error after Integration Kit 3.1 FixPack 1.7

Hello all,
We face an error after the patch(Integration Kit 3.1 FixPack 1.7) application now.
When we access CMC, after a patch(Integration Kit 3.1 FixPack 1.7) application, an error occurs.
HTTP:404 error
/PartnerPlatformService/Appl/logon.do
Do you know a correspondence method about this phenomenon?
In addition, please teach it about the known problem occurring with this patch.
Regards
Toru

Hi,
ok please do the following:
1) Stop the tomcat
2) Go to <BOBJ installation directory>\Tomcat55\webapps (For Unix: <BOBJ installation directory>\bobje\tomcat\webapps) and remove the following directories:
CmcApp
CmcAppActions
InfoViewApp
InfoViewAppActions
dswsbobje
OpenDocument
PartnerPlatformService
SAP
3) Restart the tomcat and wait until the directories you removed are created again (Tomcat does this automatically)
Try after this to log into the CCM/InfoView
Regards,
Stratos

Similar Messages

Install-error "BO Integration KIT -for SAP " STW00152

Hi,
In that installation "BO Integration KIT - for SAP" in the phase "CMS-connecting to CMS" I get a errormessage
"Connect to CMS is not possible. STW00152"
(Befor them, I installed "BO Enterprise XI 3.1 SP3" successfully)
I check the central configuration manager and I see BOE120Tomcat and Server Intelligence Agent was in the status "uncompletedly" and WWW Publishing Service was in status "it is explained". I started boht but I got a errormessage "The system cannot find the path specified"
I open the qualities for the "Server Intelligence Agent" and klick OK - I got a errormessage "the startparameter can't opposed. Error 87. The parameter is incorrect"
thanks .

Hi,
it looks like that even your BOE installation isnt working properly.
Try to reboot the Server and check if your BOE Server starts. After it starts successfull try to install the SAP ITK.
If it doesnt start, i would recommend you re- install BOE first.
Regards
-Seb.

Error after Integrating of Xcelsius SWF into Enterprise Portal

Hi all,
I integrated Xcelsius SWF file into portal using Business Objects Integration Kit - iView Template. I can see dashboard in Portal. Its working fine. I have Refresh Button in the Dashboard. If I refresh the dashboard , it shows cannot access External Data. Failed to get the document information(LO26315).
How can I resolve? Help me in this regard.
I am using BOE 3.1 and LO 3.1.
Thanks & Regards,
Hemalatha J

With a Live Office connection, you would typically use the URL iView and the opendocument URL to integrate the dashboard into the Enterprise Portal. There are existing posts on this forum about opendocument and Xcelsius dashboards.
Obviously you need to make sure the dashboard refreshes fine outside of the portal, for instance from Infoview.
Then, you need to look at the cross domain constraints : have both Infoview and Enterprise Portal in the same domain or use crossdomain.xml. They are lots of posts on this forum about that too.

URL webdynpro was not called due to an error after integration

Hi All,
I have integrated SRM (ABAP) to EP(dual-stack) portal system (both are EHP1) which are freshly integrated using BS: SRM-Portal (Basic Configuration) V1.
I've checked SRM web based GUI "http://<hostname>.<FQCN>:8002/sap/bc/gui/sap /its/webgui"
and it's working, but when i tried to check webdynpro,
"http://<hostname>:<FQCN>:8002/sap/bc/webdynp ro", i couldn't connect to the link. I already read this sap note "1088717 - Active services for Web Dynpro ABAP in transaction SICF" and compared all services in SRM (ABAP) that should be activated but this error still persists. I already changed this parameter icm/host_name_full and SAPLOCALHOSTFULL.
Error in accessing webdynpro link:
Note
The following error text was processed in the system SR2 : WebDynpro Exception: Application // Does Not Exist
The error occurred on the application server MDCSAP05_SR2_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: IF_WDR_RUNTIME~GET_RR_APPLICATION of program CL_WDR_MAIN_TASK==============CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Any solution for this? Please help thanks!
Best regards,
Tony

Hi,
If you called this URL : "http://<FQDN>:<port>/sap/bc/webdynpro"
The error is normal : you tried to call the webdynpro runtime without telling which webdunpro application you want.
A real webdynpro URL looks like : http://<FQDN>:<port>/sap/bc/webdynpro/application
Regards,
Olivier

ESB(Enterprise Services Builder) access error after PI 7.1 install

We have installed PI 7.1 system. Everything went well with installation.
We can access all the components such as RWB, Directory, SLD,...
However when we try to access ESB(Enterprise Services Builder) we are geting the following error:
"Cannot connect to server using message server: ms://si5host:8106/P4"
We checked the exchange profile parameters and com.sap.aii.connect.repository.mshttpport is having 8106 value.
Did any one face such an issue. Please respond.

The problem is resolved for us.
The problem was caused because we did nt have a "FULLY QUALIFIED SERVER NAME" in the exchange profile parameters on the JAVA side.
Once we had the FULLY QUALIFIED SERVER NAME the issue was resolved.
Hope this helps other people who run into the same issue.

Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, Timo

Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
   <context-param>
        <param-name>config.logon.service.context</param-name>
        <param-value>/PlatformServices</param-value>
    </context-param>

Error while Importing Integration kit Transport Requets into SAP ECC 5.0

HI ,
1. AT BO side -> I can see the many roles, but under 'role import tab' in CMC when i add any 'role' and click on update button,
     system showing an error as below .
   "Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC
   5.0 When i imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
contain similar error. Now when i try to login into sap its going dump.Is there any possibility of reverting back the transport
requests.
Pls help me to fix these issues.
Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AM

Hi ingo,
Now i can able to transport successfully after following the order.
Thank you very much
Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
Earlier i have imported non unicode request numbers into sap unicode system.
tats why i got error.
Now i have imported unicode request number to unicode sap system with sequence.
Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM

No Connection after installing SP 2.3 for SAP Integration Kit

Hello Community!
We just installed Service Pack 2 and Fix Pack 2.3 (in this order) for SAP Integration Kit on one of our client's servers. Before that everything worked fine. After the installation I verify the CE connection in /crystal/rptadmin. The result is:
Unable to log on to Enterprise system. Reason: Unable to log on: Could not connect to server vm103:6400. Please check that the server name is correct, and that the server is running.
I checked the RFC connection in sm59 but that works normally. BW Publisher Service is also running. The servers (BW and BO) are on the same machine: Windows 2008, 64bit, SQL Server, BOE XI 3.1 SP 2.
The BW Publisher Trace log shows the following entry:
[Fri Feb 26 12:45:57 2010]     1480     6084     SAP bwcepub: Tracing is enabled.
[Fri Feb 26 12:46:17 2010]     1480     6084     Entering CPubReqPing::Process(1)
[Fri Feb 26 12:46:17 2010]     1480     6084     Logging on to Crystal Enterprise
[Fri Feb 26 12:46:23 2010]     1480     6084     ERROR: .\system_connectors.cpp [479]: l_pSessionMgr->Logon(l_bstrUserName, l_bstrPassword, l_bstrCMSName, l_bstrAuthMethod, &m_pSession) failed with return code l_hr = -2147219455
[Fri Feb 26 12:46:23 2010]     1480     6084     Leaving CPubReqPing::Process(1)
[Fri Feb 26 12:46:23 2010]     1480     6084     Dispatch returned with code 0 and message [See RFC trace file or SAP system log for more details]
When I try to log into BO Info View or CMC with my SAP credentials CMS crashes without any logs!
This is now the 2nd server with that issue!
Any ideas what this could be?
Thank!
phil

No, this happens only by logging in with SAP credentials.
CMS log file shows a huge list of entries like this one:
.\pluginhelper.cpp:276: TraceLog message 1
2010/02/26 11:46:49.316|>>|A| | 936|6040| |||||||||||||||assert failure: (.\pluginhelper.cpp:276). (0 : Error reading pin file E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xmlwarnings:
errors:
fatal errors:
Fatal Error in file: E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xml, line: 1, col: 1, Message: Invalid document structure
But I've got these entries on other systems too...

Integration Kit SAP 3.1 - installation error

Hello all,
I am in the process of installation of the BO integration kit for SAP (3.1) on the machine(win 2003 server) having BOE 3.1(Tomcat server) & Crystal reports2008V1. I have followed the steps given by
Ingo Hilgefort and in the middle of installation steps - after the web server input info screen (tomcat), when I enter Next following error is displayed shutting down the process.
"installation ended prematurely because of an error"
Log file has following error.
Note: 1: 1708
MSI (c) (60:BC) : Transforming table Error.
MSI (c) (60:BC) : Transforming table Error.
MSI (c) (60:BC) : Product: BusinessObjects XI Integration for SAP Solutions -- Installation operation failed.
And also I tried to install with integration kit for SAP 3.O, following is the error I got.
"\win32_x86\CrystalExtension.dll failed to register. HRESULT - 2147024769"
When I ignore this error, then I don't see SAP in CMC authentication.
I appreciate if anyone can help me to resolve this issue.
Note: SAP BI7 AND ECC are on different servers.

Hi
make sure that you are using the 32bit version of SAP Jco (even if you have a 64bit system).
please make sure your Set the CLASSPATH variable to point to your sapjco.jar. If the error persists please try to install the int.Kit for SAP silently (Follow the steps below, for Windows ONLY):
1) Extract the installation files for the int.Kit in a separate folder (you need WINRAR for this)
2) Open a command line prompt and change to the folder you extracted the installation files into.
3) Start the following command: setup.exe -w installationIntKit.ini
4) Provide the required input and continue until the installation crashes. Make sure that you select the automatic deployment option.
5) Make sure that the file installationIntKit.ini is created in the folder you started the command into.
6) Start the following command: setup.exe -r installationIntKit.ini
7) The installation runs now in background and check with the Task Manager until the setup.exe is no longer visible.
8) Verify that the int.Kit is installed by looking the list of the installed programs.
Regards,
Stratos

Error in Database 10G 10.2.0.3 after integration of SOA(10.1.3.1.0) & OID

hi',
I am facing issue with database after integrating OID with BPEL,
below are the products and the versions:
1.) Oracle 10G database version (10.2.0.1) patched it to version (10.2.0.3)
2.) SOA suite version (10.1.3.1.0)
3.) Oracle Access Manager version (10.1.4.0.1)
4.) Oracle Identity Manager version (10.1.4.0.1)
the issue is as soon as I integrate OID with BPEL and restart the system the database will start throwing all sort of errors.
like "TNSListener.exe has encountered a problem and needs to close"
In the services if I try to start sql plus then "isqlplussvc has encountered a problem need to close "
My question is are these stabe versions for doing the integration, if no then please tell me what version to use.
thanks
Yatan

I am able to resolve the issue:
The mistake I was doing was creating ORACLE_HOME in the enviornment variable, as I have Oracle 10 G database and SOA suite on the same machine, so it was creating a clash, the right approach is setting the ORACLE_HOME through command prompt, I was setting ORACLE_HOME because while executing the configure_oid.bat file it requires ORACLE_HOME to be set.
-Yatan

Integration Kit for SAP - Open SQL access to tables. List incomplete.

After we install the BO integration kit for SAP and CR 2008 we were able to connect to SAP and open SAP Data Dictionnary tables (Open SQL access).
I have a problem however:
when I display the list of available tables, the is not showing all the tables in the SAP system. I believe it stops at some point.
I see all tables with low letters or starting with /BIC...
I have custom tables with names ranging from ZR1 to ZR5.
Of these I only see tables up to ZR2*.
My guess is :
either that the table list displayed is limited to a certain mumber of tables
or that there are some authorisations issues to be solved to view all tables (but the same SAP User sees all tables in SE11)
or there is a table related setting in the Data dictionnary that makes some tables visible by CR and other not
Thanks in advance for any answer.
Claudio Ciardelli

correct - it stops at one point because showing you more than 30.000 tables doesn't really help. Right click on your connection (server entry), select the menu options, there is an entry called Table name like. in your case enter Z% and hit F5 for a refresh and you will only get tables shown starting with Z
Ingo

Error using CR 11.5 with dynamic cascading prompts and SAP Integr.Kit XI R2

Hi,
we are using the SAP Integration Kit XI R2 (patched up to FP4.3) in order to report SAP BW data (BW 3.5) in Crystal Reports 11.5 (SP 4). In order to access the stored BEx Queries we use either the SAP BW Query or the SAP BW MDX Query Driver (_we DO NOT use any universes_). Everything seems to work fine ex cept when we want to use dynamic cascading LOVs within CR. For example when a user runs a report she/he should select first a customer group (0CUST_GROUP prompt) and then the customer (0DEBITOR). Defining the cascading prompts with dynamic LOVs is no problem in CR and when the report runs (either in CR Designer or in InfoView) both prompts appear. Still when we do a selection for the first prompt (0CUST_GROUP) we get a 0x8004380D error with the text message stating that the system is not able to retrieve the LOV data (I guess for the 0DEBITOR prompt). Please note that we do not get a corba error and no firewalls are activated. We checked the trace files of the page server and found out that there was an error calling the createRowsetCursor function within enginekernel.cpp.
Any hints on our case will be mostly appreciated. We have the feeling that we are hitting a bug here but maybe we are overseeing something.
Cheers
Stratos
PS: Please note that if we access directly the ODS Object (SAP ODS driver) the dynamic cascading prompts on exactly the same InfoObject (or better their keys in the ODS) work without a problem.

Hi Stratos
You can define LOV's in universes but unfortunately you can not use universes based on SAP in Crystal Reports.
You can define parameters in the Bex query which are passed on to Crystal Reports, so you don't need to define them in the Business Objects tools. Please have a look at the SAP Integration Kit user's guide
Roland

HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Error while updating SAP Integration Kit XI 3.1 to SP3

Dear All,
I have updated BusinessObjects Enterprise XI 3.1 and Integration Kits for SAP XI 3.1 to SP3.
The update of BusinessObjects Enterprise XI 3.1 was fine. While updating IK for SAP, the installation shown the following error
sapweb_rri.dll failed to register.
sapweb_parameter.dll failed to register
Then I completed the installation by 'Ignore' ing the above installer informations.
Now I am getting the following error
"Account information not recognized: Plugin Manager error: Unable to locate the requested plugin secSAPR3 on the server. (FWB 00006)"
Before the update, the setup was working fine.
Does this ignored error caused the problem?
Please help me to resolve the issue.
Thanks and Regards,
Yuvaraj

Thank you.
I have the following questions, for this full installation of IK SP3,
I have imported transports from IK XI 3.1 for R/3 and BO connection in R/3.
Does the transport that comes with IK SP3 is modified?
And also some reports are developed based on the datas from R/3.
Does this complete uninstallation of IK affects the existing contents?
Regards,
Yuvaraj.

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

Unfortunately, it says I can't delete anything without the missing password.

CMC access error after Integration Kit 3.1 FixPack 1.7

Similar Messages

Maybe you are looking for