CMC Authentication SAP - Role import Error

Dear All
I installed BOBJ Edge and Integration Kit SP5.
I am able to logon to the CMC Console . In the authentication I am able to see SAP.
I provided the Entitlement System detail and upon selecting the 'role import' tab i am getting following error.
OWN_LOGICAL_SYSTEM_NOT_DEFINED RAISED
can some one help me please
Regards,
Venkat

Dear All
I am getting exactly this error.
/jsp/auth/sapsec_import_role.jsp:22 19: 20: <% 21: String context=secSAPR3ImportRoleBean.getContextPath(); 22: secSAPR3ImportRoleBean.init(request); 23: response.setHeader("Expires", "0"); 24: %> 25: Stacktrace: )
Regards,
Venkat

Similar Messages

Role Import Error In SAP Authentication

Dear Experts,
I have Installed BO XI R3.1 Integration kit for Sap Solutions.After Updating in Entitlement System,Options then while moving to Role Import i am getting error as shown below.
After Login to CMC>Authentication>SAP-->Role Import
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=biwdev, GWSERV=sapgw01, SYSNR=01 LOCATION CPIC (TCP/IP) on local host ERROR hostname 'biwdev' unknown TIME Wed Jun 08 11:03:00 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -2 MODULE nixxhl.cpp LINE 183 DETAIL NiHLGetNodeAddr: hostname cached as unknown COUNTER 110
1)Can you please tell me how to solve it?
2)Can you please give me links related to Single Sign On or documents ?

Hi,
are all transports imported in your SAP Back- End?
Can you ping your SAP Back- End from your BO Server?
With regards to SSO, you can have SSO from your SAP EP to BOBJ or from BOBJ to your SAP Back- End. Check the SAP ITK installation guide.
https://websmp203.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
You need a S-User for Login.
Regards
-Seb.

ERM - Mass Role Import Error

I just upgraded to SP11 and am trying to mass import a few roles. It doesn't give me an error on the mass input screen, but it doesn't import the role, so I put DEBUG on and looked at the system logs. I created the download file as both ANSI and UTF-8 and neither is working. Here is the system log output:
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG
-- Request dump for Action Path is cnvMassRlImport.scrMassRlImport.loadMassRoleImport
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG recordHistory:0::true#
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG -- End Request dump for Action Path is cnvMassRlImport.scrMassRlImport.loadMassRoleImport
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Current Module: |CFG| Conversation: |cnvSysLog| Screen: |scrSysLog|
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Module#CFG#Conversation#cnvMassRlImport#Screen#scrMassRlImport#Action#loadMassRoleImport#
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Changing Conversation: FROM: cnvSysLog TO cnvMassRlImport
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG com.virsa.framework.Context : clearConversationRep :   : 0 entries cleared from conversation repositiory
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG com.virsa.framework.Context : clearScreenRep :   : 0 entries cleared from screen repositiory
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG Handler found:class com.virsa.re.configuration.action.MassRoleImportAction
2010-03-23 11:26:51,160 [SAPEngine_Application_Thread[impl:3]_39] DEBUG forwarding to:/cfg_mass_role_import.jsp
2010-03-23 11:27:09,316 [SAPEngine_Application_Thread[impl:3]_28] DEBUG
-- Request dump for Action Path is scrMassRlImport.importRoles
2010-03-23 11:27:09,316 [SAPEngine_Application_Thread[impl:3]_28] DEBUG -- End Request dump for Action Path is scrMassRlImport.importRoles
2010-03-23 11:27:09,316 [SAPEngine_Application_Thread[impl:3]_28] DEBUG Current Module: |CFG| Conversation: |cnvMassRlImport| Screen: |scrMassRlImport|
2010-03-23 11:27:09,316 [SAPEngine_Application_Thread[impl:3]_28] DEBUG Module#CFG#Conversation#cnvMassRlImport#Screen#scrMassRlImport#Action#importRoles#
2010-03-23 11:27:09,316 [SAPEngine_Application_Thread[impl:3]_28] DEBUG Handler found:class com.virsa.re.configuration.action.MassRoleImportAction
2010-03-23 11:27:09,332 [SAPEngine_Application_Thread[impl:3]_28] DEBUG dirName-->E:\usr\sap\WMS\GRC\ROLEIMPORT\1269358029332
2010-03-23 11:27:09,347 [SAPEngine_Application_Thread[impl:3]_28] DEBUG returnStatus###success
2010-03-23 11:27:09,347 [SAPEngine_Application_Thread[impl:3]_28] DEBUG forwarding to:/cfg_mass_role_import_status.jsp
2010-03-23 11:27:10,769 [SAPEngine_Application_Thread[impl:3]_31] DEBUG
-- Request dump for Action Path is scrMassRlImport.generateRolesForeGround
2010-03-23 11:27:10,769 [SAPEngine_Application_Thread[impl:3]_31] DEBUG -- End Request dump for Action Path is scrMassRlImport.generateRolesForeGround
2010-03-23 11:27:10,769 [SAPEngine_Application_Thread[impl:3]_31] DEBUG Current Module: |CFG| Conversation: |cnvMassRlImport| Screen: |scrMassRlImport|
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG Module#CFG#Conversation#cnvMassRlImport#Screen#scrMassRlImport#Action#generateRolesForeGround#
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG Handler found:class com.virsa.re.configuration.action.MassRoleImportAction
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG In LockedObjBO.getLockedObjListByType(String objType) starts.....
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG In LockedObjBO.getLockedObjListByType(String objType) ends.....
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG GET_BUS_PROC ===== SELECT BP.BPROCID, BP.BPROCNAM, BL.BPROCDES FROM VT_RE_BPROC BP LEFT OUTER JOIN VT_RE_BPROCLNG BL ON(BP.BPROCID = BL.BPROCID AND BL.LNGID=?), VT_RE_BPSPASSOC BSP WHERE BP.BPROCID = BSP.BPROCID AND BSP.SUBPROCID =?
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG bprocName ===== HR00
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG keys.size():- 42
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 1 cache statusid = 1 value = DEVELOPMENT Desc = Kehitys
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 2 cache statusid = 2 value = PRODUCTION Desc = Produksjon
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 3 cache statusid = 1 value = DEVELOPMENT Desc = ??
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 4 cache statusid = 1 value = DEVELOPMENT Desc = Development
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 5 cache statusid = 2 value = PRODUCTION Desc = �retim
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 6 cache statusid = 1 value = DEVELOPMENT Desc = Projektowanie
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 7 cache statusid = 2 value = PRODUCTION Desc = Production
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 8 cache statusid = 2 value = PRODUCTION Desc = Produ��o
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 9 cache statusid = 1 value = DEVELOPMENT Desc = Desarrollo
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 10 cache statusid = 2 value = PRODUCTION Desc = Production
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 11 cache statusid = 2 value = PRODUCTION Desc = Produzione
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 12 cache statusid = 1 value = DEVELOPMENT Desc = ??
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 13 cache statusid = 1 value = DEVELOPMENT Desc = ??
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 14 cache statusid = 2 value = PRODUCTION Desc = ??
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 15 cache statusid = 1 value = DEVELOPMENT Desc = Udvikling
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 16 cache statusid = 2 value = PRODUCTION Desc = Produkt�v
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 17 cache statusid = 1 value = DEVELOPMENT Desc = ??????????
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 18 cache statusid = 2 value = PRODUCTION Desc = V�roba
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 19 cache statusid = 2 value = PRODUCTION Desc = Productie
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 20 cache statusid = 1 value = DEVELOPMENT Desc = Fejleszt�s
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 21 cache statusid = 2 value = PRODUCTION Desc = Produktion
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 22 cache statusid = 1 value = DEVELOPMENT Desc = Desenvolvimento
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 23 cache statusid = 2 value = PRODUCTION Desc = ???
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 24 cache statusid = 1 value = DEVELOPMENT Desc = Ontwikkeling
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 25 cache statusid = 2 value = PRODUCTION Desc = V�roba
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 26 cache statusid = 2 value = PRODUCTION Desc = ????????????
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 27 cache statusid = 1 value = DEVELOPMENT Desc = Sviluppo
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 28 cache statusid = 1 value = DEVELOPMENT Desc = Utveckling
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 29 cache statusid = 2 value = PRODUCTION Desc = Tuotanto
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 30 cache statusid = 2 value = PRODUCTION Desc = Produkcja
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 31 cache statusid = 1 value = DEVELOPMENT Desc = Utvikling
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 32 cache statusid = 1 value = DEVELOPMENT Desc = V�voj
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 33 cache statusid = 2 value = PRODUCTION Desc = Produktion
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 34 cache statusid = 1 value = DEVELOPMENT Desc = V�voj
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 35 cache statusid = 2 value = PRODUCTION Desc = ??
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 36 cache statusid = 2 value = PRODUCTION Desc = Produktion
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 37 cache statusid = 2 value = PRODUCTION Desc = Proizvodnja
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 38 cache statusid = 1 value = DEVELOPMENT Desc = Entwicklung
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 39 cache statusid = 1 value = DEVELOPMENT Desc = Geli?tirme
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 40 cache statusid = 1 value = DEVELOPMENT Desc = Razvoj
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 41 cache statusid = 2 value = PRODUCTION Desc = Producci�n
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 42 cache statusid = 1 value = DEVELOPMENT Desc = D�veloppement
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 1RoleStatusName:- DEVELOPMENT
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG 2RoleStatusName:- PRODUCTION
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG MissingDescriptionHelperDAO.java@37:com.virsa.re.dao.MissingDescriptionHelperDAO.getMissingRoleDesc()missingLst.size(): 1
2010-03-23 11:27:10,785 [SAPEngine_Application_Thread[impl:3]_31] DEBUG startIndex: 0; endIdex: 1
2010-03-23 11:27:10,800 [SAPEngine_Application_Thread[impl:3]_31] DEBUG RoleImportBO.java@1393:com.virsa.re.bo.impl.RoleImportBO.createRole()Creating Role:ZM:HR_PY_DEPT_SUPP_COMP profile:'Z:DEPTSUPP'
2010-03-23 11:27:10,800 [SAPEngine_Application_Thread[impl:3]_31] DEBUG InsIde getLastGenerateDate(3572,11)
2010-03-23 11:27:10,800 [SAPEngine_Application_Thread[impl:3]_31] DEBUG InsIde getLastGenerateDate(3572,11) ResultSet and got an entry
2010-03-23 11:27:10,800 [SAPEngine_Application_Thread[impl:3]_31] ERROR Cannot assign a java.lang.String object of length 389 to host variable 7 which has JDBC type VARCHAR(100).
java.lang.Throwable: Cannot assign a java.lang.String object of length 389 to host variable 7 which has JDBC type VARCHAR(100).
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.types.GenericResultColumn.checkLength(GenericResultColumn.java:212)
     at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:63)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
     at com.virsa.re.dao.jdbc.ChangeHistoryDAO.saveChangeHistory(ChangeHistoryDAO.java:318)
     at com.virsa.re.bo.impl.ChangeHistoryBO.saveChangeHistory(ChangeHistoryBO.java:77)
     at com.virsa.re.bo.impl.RoleBO.updateRoleWithChngeHist(RoleBO.java:469)
     at com.virsa.re.bo.impl.RoleImportBO.createRole(RoleImportBO.java:1437)
     at com.virsa.re.bo.impl.RoleImportBO.importRoles(RoleImportBO.java:639)
     at com.virsa.re.bo.impl.RoleImportBO.importRoles(RoleImportBO.java:333)
     at com.virsa.re.configuration.action.MassRoleImportAction.generateRole(MassRoleImportAction.java:597)
     at com.virsa.re.configuration.action.MassRoleImportAction.execute(MassRoleImportAction.java:78)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi All,
Two weeks ago, I have trying to load roles in ERM. The result hasn´t been than expected. I use SAP GRC AC (5.3). I need to load 6375 single roles, but only I have loaded 914 single role. Next I described to you a general context of my situation:
1. I divided the file VIRSA_RE_DNLDROLES.txt into 16 files (UTF - 8) with single roles per module (AM, PO, PS, GL, SD...)
2. Each file contains segmented roles associated to a business process and multiples sub - business process.
3. When I checked roles in ERM, I notice that just load any roles. Not all roles in template was loaded.
4. Files size varies between 18 kb y 145 kb.
5. Files concerned "Mass Role Import" have the following extensions: Bulk Download File* (.txt), Enterprise Role Management Information File (.xls) and Primary Org. Level File (.xls).
5. A error generated was "Unknown error occurred while performing operation (No space left on device (errno:28))."
Honestly, I don´t know the reason for not loading all roles from template. Any suggestions? or ideas?
Thanks in advance

GRC AC 5.3 SP5 - ERM mass role import error

Dear Gurus
I am customising ERM 5.3 SP5 and encountering the following error.
I have tried to search and find the forum for an analogous message, but unsuccessfully.
Thanks in advance for your assistance / support
Best regards
RONAN
Role Import Failed for SAP_CO_OM_XXXXX_XXXXXX_X :
2010-01-15 09:07:47,065 [Thread-315] ERROR com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPxxxDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.

Hello Ronan,
This is a connection error and can be rectified by your basis team (as mentioned by Alpesh) which need to increase the wait time. If you are just dealing with the configuration part, then I would say it is not an error resulting from Functional Config but Basis Configuration.
regards,
hersh.
Edited by: HERSH GUPTA on Jan 17, 2010 3:28 PM

GRC 10 Role Import error(Master role does not exist) in SP12

Hi,
We have completed connectors part and ran sync jobs successfully.
We have given required inputs in Define Criteria,Select Role Data in Role Import.When we submit this,only few roles are successfully imported.
It is giving error like Master role does not exist(some roles) but it is successful for few other roles.
We have tried with SKIP option in role authorization source as per a note but it is not successful for all the role import and getting above mentioned error.
Please check and advice.
Thanks & Regards,
Koteswara Rao.

Hi Koteswara
Have you confirmed in SAP that your ZM* roles are definitely imparting roles only? When you tried to upload them on second attempt, did you relaunch the the role import screen to ensure any buffering completely cleared?
Another thing to try - import the master role and then exit NWBC and run the repository synch job. Go back to NWBC and attempt to import the derived roles to see if error is gone?
If these don't work for you it may be time to contact SAP. I assume it was the following note you referred to: 1576321 - Import derived role without master role
Also, this topic was raised in SCN last year (unfortunately the thread was not updated with the solution). Possibly reach to the thread owner and see if they will login to SCN and update it Role import failed with Master role does not exist in SP13
Regards
Colleen

CMC - Authentication - SAP Entry?

Hi,
we installed (or we are trying to install) SAP Integration Kit (Server + Client).
When I try to logon now to server, I can choose between Enterprise, LDAP,Windows AD AND SAP. This is good. But when I goto CMC -> Authentication -> I can't see an SAP Entry nor Windows AD.
I at least expected here the SAP Entry...what do you have?
Please provide feedback!
Regards,
Christian

Hi,
It seems like that the web applications have not been deployed correctly. When you are on a Unix/Linux environment, then you have to manually deploy the web applications after you install the SAP Integration kit. This is done using the command line tool WDEPLOY. The process is described in the installation guide (xi31_sp2_bip_sap_install.pdf on page 33 and onwards.
Once deployed successfully, the SAP entry will be available under Authentication in the CMC.
Hth.,
Jacob

CMC- Role Import Error in CMC

Business Objects Version : XI3.1
SAP IK installed
Windows
Tomcat
After sucesfully deployemnt of the SAP IK on BOE on windows, when we are trying to import the users we are facing an error.
com/sap/mw/jco/JCO$Function
As per the suggestions i declared the sapjco path in the tomcat configuration.
Any suggestions will be appreciated.

I would recommend to copy both the DLL files (librfc32.dll and sapjco.dll) from the SAP Jco 2.1.8 32bit package directly under <windows installation directory>\SysWOW64
Try also to copy sapjco.jar under <BOBJ installation directory>\Tomcat55\shared\lib (create the path if it does not exist).
Restart the Tomcat and the SIA and check what happens.
Regards,
Stratos

Mass Role Import Error - When download files exceeds 10000 lines

Hi,
Whenever I import any role from the backend system with the download file from SE38 of more than 10000 lines, I am getting the following error. If the download file is less than 10k lines it works .
please assist me.
Unknown error occurred while performing operation (n/a)
My version is GRC 5.3 backend is ECC 6.0.
Thank you.
Edited by: Deepan Chakravarthy on May 12, 2009 2:58 PM

Hi Harleen,
Thanks for your suggestion.
My system SP level is 5. can you please instruct me how to get the error logs.
Regards.
Deepan....
Edited by: Deepan Chakravarthy on May 12, 2009 6:51 PM
Edited by: Deepan Chakravarthy on May 12, 2009 6:52 PM

AC 5.3 ERM : Mass Role Import Error

Hi,
I am getting the following error while uploading a single role to test the import functionality.
"Role not imorted; unable to determine matching business process for (Role Name) in the system"
But the Busines Process is available in the system and I mentioned it correctly in the Information file.
Both files Bulk download and information are in txt format.
Any clues?
Thanks.
Rgds,
Raj.

Hello Raj,
In addition to what Sabita and Alpesh have mentioned, please do also check if the format of the entries is correct. Be very careful of the TAB spaces that you have to use in the text file while you upload. For this, initially you may try with 2-3 roles at a time and then probably with al the roles to save time and effort.
Regards.
Hersh.

Erro when importing SAP roles into BO Edge XI 3.1

Hello,
I'm currently setting up the SAP Best Practices on a BO Edge XI 3.1 system (32 bit) and trying to link up with an SAP ECC 6 EHP 4 system (64-bit).
When getting to the authorisation step I go to the CMC > Authentication > SAP > Role IMport.
There I receive following error:
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc. Found version "2.1.9 (2010-01-28)" but required version "2.1.8 (2006-12-11)".
After closing and re-entering the same tab I receive following message: org.apache.jasper.JasperException
I have not even the possibility to enter the roles manually. The system doesn't allow me.
There is no specific SNC security set up for my SAP system.
I have been able to connect to the logical system of SAP because when I updated on the tab: "Entitlement Systems" it proposed my logical system name that I created in SAP.
As I found on another SAP forum the version 2.1.9 should also be the good version.
Can someone help me out with this one (does anyone has still the older SAP Java connector version 2.1.8)?
thanks in advance
Thierry

Hello,
That's what i did but didn't help.
I finally managed to find the problem. I had also to install a file named librfc32.dll in the same directory. When installing the necessary files apparently the version of this file librfc32.dll was not the correct one because it didn't match with the version that is installed together with the Sap gui (I presume). So by re-installing the former version of this file librfc32.dll it finally worked.
thanks anyway

Error when updating through "Role import"

Hi all
I get this error when I update through Home > Authentication > SAP > Role Import:
"An error occurred while communicating with the CMS.
The following error message was returned:
Error occurred in CSAPSecHttpRolePage::OnCommitRoles. Return value = -2147213817 (0x80041e07)j Failed to commit objects to server : Duplicate object name in the same folder."
Does this mean that I have duplicate users or groups? If this is the case, how come I get the error even if I remove all roles, update, and then add a role and update again? Then everything should have been cleared?
And the funny part is that the import of users seems to work, because I can log on to the InfoView using SAP authentication... But I don't like this error, and would like to get rid of it.
Best regards,
Martin Søgaard

Hi Sogaard,
when you remove all roles can you verify that all the user groups and users are being removed from the system ?
after removing the roles could you also delete the entitlement system and re-create it ?
Ingo

Cannot add BW SAP system in CMC Authentication\Entitlement System

Hi,
I've re-installed Edge XI 3.1 SP3, Explorer/Polestar SP2 and finally SAP Integration Kit SP3 on Windows 2008 & SQL Server 2008 after a consultant came onsite to do this 4 months ago. I wanted the practice and its a pilot installation only.
I cannot seem to add my SAP BW Dev system to the Entitlement system from within the CMC - Authentication - SAP section however. I 've got the .dll's in the right places, I've tried uninstalling and reinstalling the Integration Kit. restarting the Tomcat server, etc to no avail. I've also had a read of Ingo's blog and am sure I've followed all his steps correctly.
Can this only be a case of not following the installation correctly or am I missing something else? Any help appreciated please.
Thanks.

Hi,
I've had success in getting the Entitlement System connected.
Basically on top of completely uninstalling everything SAP and BO related, renaming folders to .OLD and rebooting, then installing Edge and SAP GUI....I then followed these steps before installing Integration Kit:
To install InfoView automatically, you must install and configure SAP Java Connector components:
To do this, copy librfc32.dll and librfc32u.dll, to the appropriate folder.
u2022 On 32-bit Windows: %windir%\system32
u2022 On 64-bit Windows: %windir%\sysWOW64
Copy sapjcorfc.dll to <BusinessObjects install directory ..\win32_x86.
Then copy sapjco.jar to the application serveru2019s shared library folder. For example, on a 64-bit Windows system with Tomcat 5.5, copy sapjco.jar to H:\Program Files (x86)\Business Objects\Tomcat55\shared\lib
N.B. Had to create folder shared\lib in H:\Program Files (x86)\Business Objects\Tomcat55.
Rebooted.
This is similar to and in addition to Ingo's steps, however he does refer to the Integration Install guide, which is where the above is mostly taken from.
I could then UPDATE the new BW Dev system from the CMC and then see all available roles.
Thanks for your prompt advice and support Ingo.

Error on role import for SAP integration with BO in CMC (3.1)

Hello,
We are trying to integrate existing BO environment in our company with existing BW installation.
BO Environment - 3.1
BW/ECC Environment - (BW - BI 7.0 SP20, ECC 6.0)
So got the pre-requisites completed and the transports imported into both BW and ECC environments. Upon these steps we went ahead and installed the integration kit for 3.1 system.
There were no error messages, after we completed the installation went into infoview and in the authentication drop down checked to see if I can get "SAP" in there....which it did. So, I am assuming there were no issues till this point which we might have missed out.
Upon this, when I went into SAP authentication in CMC and double clicked on SAP and in the next screen clicked on "NEW" and added in the application server, system number, id and password and updated it...this automatically updated the logical system.
But when I go into the role import, it gives me the following error message....
Exception in JSP: /jsp/auth/sapsec_import_role.jsp:22:19:20: <%21:string context::secSAPR3ImportRoleBean.getContextPath():22: secSAPR3ImportRoleBean.init(request):23:response.setHeader("Expires","0"):24: 5> Stacktrace:
The only thing is we have not assigned the CRYSTAL_ENTITLEMENT role to it as we are at this point only trying to see if we can log into webi...
So, is it required to assign this role to an existing user id role in order for me to import the roles into BO CMC screen in order to be assigned to a group.
Can you please help me out on this.
Thanks
Dharma.

Hello Ingo,
Thanks a lot for looking into the question.
Yes, we are taking about the SAP Authentication part where I am trying to import roles in SAP into BO after I provide the login information in the Entitlement systems tab.
I confirmed that all parts of Java Connector configuration were taken care of as mentioned in the installation manual and from your blog.
The only piece left off is the CRYSTAL_ENTITLEMENT role assignment to the id which is used within the entitlement systems tab in CMC. I will get this configured and try it one more time.
Just to confirm,
1. The new user id to be created (should it be a RFC user or dialog user)
2. Is the only role to be assigned to the new user is CRYSTAL_ENTITLEMENT with the authorization mentioned in the installation manual
3. What are the roles to be imported into BO within CMC (are these the roles which we want for data access)
4. When a user tries to login with any other user id other than the one listed in Entitlement systems tab, does it use the roles assigned to that person in SAP to retrieve the data or would it be dependent on the roles imported into BO within CMC in earlier step.
Please let me know.
Thanks
Dharma.

Importing SAP Roles in CMC

HI
when I importing SAP Roles in CMC there is an error, following is the error information:
CMALLC:rc=27>Connect from SAP
gateway to RFC server failed Connect_PM GWHOST=192.168.1.66,
GWSERV=sapgw00,SYSNR=00
Location SAP-Gateway on host saptest/sapgw00
Error   timeout during allocate
Time   Tue Feb 22 15:25:58 2011
Release 720
Component SAP-Gateway
Version 2
RC      242
Module gwr3cpic.c
Line     1911
Detail    no connect of TP sapdp00 from host 192.168.1.66 after 20 sec
Counter 2
Thanks

HI,
are you using the details for an application server or for a message server ?
Ingo

Org.apache.jasper.JasperException; JCO error when Importing SAP Roles in C

Hello experts,
I have installed BOXI 3.1 SP3, Integration kit SP2, BW/BI 7.0 and ECC 6.0 on Windows 2008/64bit.
My goal is to import the roles into CMS from SAP BW/BI but getting the follwoing errors:
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc
C:\Windows\SysWOW64\sapjcorfc.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform.
java.library.path [C:\Windows\SysWOW64\;D:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\]
org.apache.jasper.JasperException
I followed the note 1292144 - JCO error when Importing SAP Roles in CMC,but unfortunately without success.
I installed SAP JCo Release 2.1.9 (64bit)
Best regards
Lutz
Edited by: Lutz Heinrich on Aug 12, 2010 4:17 PM

Install the 32bit version of the Java connector. BOBJ is 32bit so even on 64bit Windows you need the 32bit version of the Java Connector.
Regards,
Stratos

CMC Authentication SAP - Role import Error

Similar Messages

Maybe you are looking for