CMC initialization of the GroupWise domain database failed (d705)

I am trying to run a newly installed Webaccess agent against a new
domain. I have been following The Caledonia Guide to Moving GroupWise. I
am running SLES 10 SP3 and GW 8.2 HP2. I created the domain, installed
the MTA and I am running that in a GUI to test. Everything looks fine
there. I install the GW Webaccess agents and configure them. Still
everything looks fine. When I run ./gwinter --show @webac80al.waa &, I
get the following error.
"GWINTER: CMC initialization of the GroupWise domain database failed (d705)
GWINTER: CMC is shutting down...
GWINTER: CMC is shut down
GWINTER: Terminating WeAccess Server"
I am running it as root.
Has anyone seen this before?
Thanks,
Dan

On 2/18/2011 5:37 AM, Dan wrote:
> I am trying to run a newly installed Webaccess agent against a new
> domain. I have been following The Caledonia Guide to Moving GroupWise. I
> am running SLES 10 SP3 and GW 8.2 HP2. I created the domain, installed
> the MTA and I am running that in a GUI to test. Everything looks fine
> there. I install the GW Webaccess agents and configure them. Still
> everything looks fine. When I run ./gwinter --show @webac80al.waa &, I
> get the following error.
>
> "GWINTER: CMC initialization of the GroupWise domain database failed (d705)
> GWINTER: CMC is shutting down...
> GWINTER: CMC is shut down
> GWINTER: Terminating WeAccess Server"
>
> I am running it as root.
>
> Has anyone seen this before?
>
> Thanks,
> Dan
Usually IIRC it means gwinter does NOT have access to your domain.
Provide more information - the domain is local to the webaccess, right?
what does webac80a1.waa show?

Similar Messages

Adobe Print form error: Initialization of the font server module failed.

Hi all,
When trying to open a PDF preview the error below is displayed:
"Initialization of the font server module failed."
The problem occurs with SAP GUI 7.10 patch 15 and Adobe Reader 9
With SAP GUI 7.10 patch 12 and 13 with Adobe Reader 9 the problem do not happen.
Has anybody faced this kind of problem? Is it a SAP GUI patch release issue?
Any help is welcome.
Kind regards,
Thiago Viaro

Hi Thiago,
We had exactly the same problem, but also with sp 12 and 13 for sapgui 710.
After applying ECL 6.0 Patch 4, the problem was solved.
Please have a look at sap note 1308147 and 1356854
Cheers,
Peter Albrecht

Initialization of the JSF runtime either failed or did not occurr

Hi, i am newby to Jdev. While working the online tutorial i have the error below. I was about creating a JSF page this error occurs.
Could someone help me please ?
Thanks
Oct 6, 2010 10:31:49 AM javax.faces.webapp
SEVERE: Initialization of the JSF runtime either failed or did not occurr. Review the server''s log for details.
java.lang.InstantiationException: org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl
     at java.lang.Class.newInstance0(Class.java:340)
     at java.lang.Class.newInstance(Class.java:308)
     at javax.faces.FactoryFinder.getImplGivenPreviousImpl(FactoryFinder.java:537)
     at javax.faces.FactoryFinder.getImplementationInstance(FactoryFinder.java:386)
     at javax.faces.FactoryFinder.access$400(FactoryFinder.java:135)
     at javax.faces.FactoryFinder$FactoryManager.getFactory(FactoryFinder.java:717)
     at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:239)
     at javax.faces.webapp.FacesServlet.init(FacesServlet.java:164)
     at oracle.jdevimpl.webapp.design.support.http.DesignTimeServletInfo._init(DesignTimeServletInfo.java:304)
     at oracle.jdevimpl.webapp.design.support.http.DesignTimeServletInfo.init(DesignTimeServletInfo.java:193)
     at oracle.jdevimpl.webapp.design.support.http.DesignTimeServletContainerContext.initializeLoadOnStartupServlets(DesignTimeServletContainerContext.java:313)
     at oracle.jdevimpl.webapp.design.DesignTimeWebApp._initializeLoadOnStartupServlets(DesignTimeWebApp.java:2661)
     at oracle.jdevimpl.webapp.design.DesignTimeWebApp._initServletContainer(DesignTimeWebApp.java:804)
     at oracle.jdevimpl.webapp.design.DesignTimeWebApp.access$000(DesignTimeWebApp.java:106)
     at oracle.jdevimpl.webapp.design.DesignTimeWebApp$1.run(DesignTimeWebApp.java:712)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)

The error show up at the time creating brand new jsf page.
SEVERE: Initialization of the JSF runtime either failed or did not occurr. Review the server''s log for details.
java.lang.InstantiationException: org.apache.myfaces.portlet.faces.context.FacesContextFactoryImpl
     at java.lang.Class.newInstance0(Class.java:340)
     at java.lang.Class.newInstance(Class.java:308)
oracle.jdevimpl.webapp.design.support.http.DesignTimeServletContainerContext.initializeLoadOnStartupServlets(DesignTimeServletContainerContext.java:313)
     at oracle.jdevimpl.webapp.design.DesignTimeWebApp._initializeLoadOnStartupServlets(DesignTimeWebApp.java:2661)
     at oracle.jdevimpl.webapp.design.DesignTimeWebApp._initServletContainer(DesignTimeWebApp.java:804)

Creating Domain step fails while trying to install OBIEE 11g (11.1.1.5)

Hi Everyone,
I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
1. Simple Install
2. Enterprise Install
3. Software only install (after installing Weblogic 10.3.4.0 separately)
Everything goes well till the step Bi Configuration->Creating Domain.
In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
Excerpt from install2011-07-29_06-13-21PM.out
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Launching NodeManager ...
Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
NMProcess: java.lang.NullPointerException
NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess:
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
NMProcess: SEVERE: Fatal error in node manager server
NMProcess: java.lang.NullPointerException
NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess: Stopped draining NMProcess
NMProcess: Stopped draining NMProcess
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
Node Manager starting in the background
Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
<Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
<Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
<Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
java.lang.NullPointerException
     at java.util.Hashtable.containsKey(Hashtable.java:314)
     at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
     at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
     at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
     at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
     at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
     at weblogic.NodeManager.main(NodeManager.java:31)
After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
Any help on this would be greatly appreciated.
Thanks and regards,
Subho

My problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
Thanks if anyone help us!!

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

BACKUP failed to complete the command BACKUP DATABASE. Check the backup application log for detailed messages.

Hi,
We have a back up that is failing.
The error is "BACKUP failed to complete the command BACKUP DATABASE RPS. Check the backup application log for detailed messages.".
As I understand it the backup application log is at C:\Program Files\Microsoft SQL Server\MSSQL.2\MSSQL\LOG. From that all I get is
2014-03-05 14:49:29.41 Backup Error: 3041, Severity: 16, State: 1.
2014-03-05 14:49:29.41 Backup BACKUP failed to complete the command BACKUP DATABASE myDb. Check the backup application log for detailed messages.
The command I am using is
BACKUP DATABASE [MyDb]
TO DISK = N'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, NAME = N'mydb-Full Database Backup', SKIP, NOREWIND, NOUNLOAD, STATS = 10
GO
The database is Microsoft SQL Server Standard Edition (64-bit) Version 9.00.1399.06.
The computer is Windows server 2003 R2 Standard Edition SP2
The Db is 191 Gb and there is 227 Gb available on the D drive where it's being backed up to.
Any thoughts as to how I can track down the problem.
Is the 227Gb of spare disk space big enough to back up a 191 Gb database?
If not how much is needed?
Thanks

Hello,
Can you apply latest service pack .I dont know but guess that can be issue.Once faced ,not quite sure.Also can you just make your command like
BACKUP DATABASE [MyDb]
TO DISK = 'D:\Domains\SQL_Backup\DB\myDb\Mydb_FullBackup_20140305_1100.bak'
WITH NOFORMAT, NOINIT, STATS = 10
GO
Just a simple one .Is backup failing immediately or after some time .Error is not so helpful as it does not shows any information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

The error "configuration system failed to initialize" occurred

Hi
When I converted and built the solution file that was developed by Visual Studio .net 2003 using Visual Studio 2005, the application program was abnormal-ended at the following step:
m_TCPChannel = New System.Runtime.Remoting.Channels.Tcp.TcpChannel(tcp_properties, Nothing, Nothing)
The error message was "configration system failed to initialize". The Exception.ToString said that the root <configuration> tag was not included in the configuration file. Therefore, I changed <configopt> tag to <configuration>
tag in the app.config file of the target project, and then executed again. Next time, the application program was abnormal-ended by the unrecognized section <xs:schema>. Therefore, I changed the app.config file to the simple one (only <configuration>
and </configuration> tags), and then executed again. The error didn't occur. I guess that it's caused by configuration settings. Please advise.
app.config file:
<?xml version="1.0" standalone="yes"?>
<configopt>
<xs:schema id="configopt" xmlns="" xmlns:xs="URLリンク" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="configopt" msdata:IsDataSet="true" msdata:Locale="en-AU">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element name="Environment">
<xs:complexType>
<xs:sequence>
<xs:element name="Name" type="xs:string" minOccurs="0" />
<xs:element name="System" type="xs:string" minOccurs="0" />
<xs:element name="DataLibrary" type="xs:string" minOccurs="0" />
<xs:element name="Default" type="xs:boolean" minOccurs="0" />
<xs:element name="UserId" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<Environment>
<Name>Test</Name>
<System>XXXX.COM</System>
<DataLibrary>XXXTEST</DataLibrary>
<Default>false</Default>
<UserId></UserId>
</Environment>
<Environment>
<Name>Production</Name>
<System>XXXXX.COM</System>
<DataLibrary>XXXPROD</DataLibrary>
<Default>true</Default>
<UserId />
</Environment>
</configopt>

Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Since your issue occurred on the converted project from VS .net 2003 to VS2005, and VS2005 is out of
our mainstream support , I suggest that you should consult on some development forums to check whether they will to provide some suggestions or
submit a support ticket to below site,
https://support.microsoft.com/oas/default.aspx?Gprid=1117&st=1&wfxredirect=1&sd=gn&wfxredirect=1
Thank you for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Error message: "Querying or saving changes to the database failed."

Hi all,
I can sense I'm becoming a regular on this particular forum - the problem of spending 8 hours a day trying to get this software working!
_*The problem*_
When i try and setup a new device, or modify an existing one, I get an error message when i get to the Transcode Settings page. The error message is "Querying or saving changes to the database failed." After this I get a blank screen and can no longer see my settings.
No amount of restarting has fixed this. And I cannot see a way to create a device through the client software and add transcode settings.
Help?
Thanks in advance,
Ben

Ah very good!
Ok - it seems then that this works absolutely fine as a work around. I can create a device and then assign the device to transcode settings through the client adminsitration panel (which is indeed what I meant).
So, there is a work around. Far less pressing now, but I would like to know why I'm getting the error message all the same - I'm now concerned about the integrity of the database...
Thanks Tony!
B

When ever i try to install photoshop cc on my laptop i keep getting this error "We've encountered the following issues installer failed to initialize. Please download adobe support advisor to detect the problem."

when ever i try to install photoshop cc on my laptop i keep getting this error "We've encountered the following issues installer failed to initialize. Please download adobe support advisor to detect the problem."

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution ?

I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution>?

Did you unzip the entire contents of the download zip file onto your hard drive before running the installer? You need to do that.
I have installed it myself and it went in just fine.
-Noel

Error determining whether the target server is already a domain controller: Failed to open the runspace pool

Hi there , i already have some others DC running w2k12 R2 on the env, but when i was promoting another new DC running w2k12 R2 on the middle of the AD sync , the server encounter an error and rebooted it self ; after the server came back online , it keep
saying that a configuration is required for AD Domain Services , like the step when you are about to promote the server , but when you try to promote it , the error "Error determining whether the target server is already a domain controller: Failed
to open the runspace pool. The server manager winrm plug-in might be corrupted or missing."

Hi,
Thanks for your post.
Please waitting for the replication is finished and rerun the domain prep command to check the result.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

PowerPivot 2012 Error: BaseWorkbook.CacheStream: Failed to read from stream. Error was: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent'

Hi, I have setup PowerPivot 2012 for SharePoint, but when I access'PowerPivot Management Dashboard' in Central Admin I get error message 'An error has occured'
Below is the error in the ULS,
Background file fill operation caught exception: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b', schema 'dbo'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.CompleteAsyncExecuteReader()
at System.Data.SqlClient.SqlCommand.InternalEndExecuteReader(IAsyncResult asyncResult, String endMethod)
at System.Data.SqlClient.SqlCommand.EndExecuteReader(IAsyncResult asyncResult)
at Microsoft.SharePoint.CoordinatedStreamBuffer.AsyncSqlSession.EndExecuteReader(IAsyncResult ar)
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPBackgroundSqlFileFiller.OnReadComplete(IAsyncResult result)
BaseWorkbook.CacheStream: Failed to read from stream. Error was: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'proc_FetchChunkFromDocStreams', database 'SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b',
schema 'dbo'.
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPBackgroundFileFiller.Fill()
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBuffer.WaitForIntervalFill(SPInterval i)
at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedMemoryStream.Read(Byte[] array, Int32 offset, Int32 count)
at Microsoft.SharePoint.SPFileStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at Microsoft.Office.Excel.Server.CalculationServer.BaseWorkbookManager.CacheStream(CachedFile cachedFile, FileLoader loader)
Regards,
Ayaz
SharePoint Architect

Hey Ayaz,
I do had the same error message when I click on "PowerPivot Management Dashboard". After few research I resolved this issue.
You need to provide the dbReader and dbWriter permission to powerpivot app pool account at "SharePoint_AdminContent_ca021d58-ef1f-4f30-9aeb-6f24db24862b"
Have a great day :-)
Santosh sethi

DFSR Replication Event ID 1202 The DFS Replication service failed to contact domain controller Additional Information: Error: 160 (One or more arguments are not correct.)

Hi,
hummmm...
The client had 1 Server with AD and All Apps, IIS, Terminal Servers (30 device Cal), File Server, SQL2008R2 on it
Task: Install new AD server promote it to DC, bring in 2nd server, Replicate the File Server (DFSR) on these 2 servers, and demote it to standard server.
1) Old AD with name "Server" with OS-2008R2 SP1 and is a DC.
2) Brought in a new server "PrimaryAD", Installed 2008R2, done DC Promo, and added it as Additional Domain controller
3) Transferred roles from old server "Server" to "PrimaryAD"
4) Brought in a new File Server replicating server "Backup-Server"
5) Copied all the data from Server to Backup-server as DFS initial file sync with robocopy
6) here the problem started, after the copy finished, next morning the "Server" server crashed.....
7) thank god the data was backed up on Backup-server. but we didnt get the time to Demote the server "Server" and remove AD from it.
8) Since AD was replicated so "PrimaryAD" was are DC, brought 2nd Server "SecondaryDC" as additional domain controller.
9) we cleaned up the metadata and used ASIEDIT to clean the remaining stuff.
10) the "Server" server was formatted and renamed as "Primary-Server" and OS2008R2 SP1 was installed with rest of required apps
11) so now the PrimaryAD the DC, SecondaryAD the Additional Domain controller, Primary-Server the mail server and File server, the Backup-server, the replicated server.
Now configured DFS Replication from Primary-Server to Backup-server and receive following Event ID 1202
If i Configure DFS Replication as follows
PrimaryAD <<>> SecondaryAD -= Works... no errors...
PrimaryAD <<>> Backup-Server = Creates but Dosent works Event ID 5012, error The DFS Replication service failed to communicate with partner BACKUP-SERVER, Additional Information: Error: 9026 (The connection is invalid)
PrimaryAD <<>> Primary-Server = Dosent creates replication job just hangs,
on primaryad continious Eveni ID 10009, DCOM was unable to communicate with the computer "SERVER" using any of the configured protocols
......something on PrimaryAD is still trying to connect to old corrupt AD server "Server"
No errors with AD replication, SYSVOL & Netlogon shares also working fine and accessible.
DFS Diagnose report says
DNS name: backup-server.mydomain.com
Domain name: mydomain.COM
Reference domain controller: -- (HERE there is NO DOMAIN CONTROLLER mentioned)
IP address: 192.168.1.248,192.168.1.251,::1
Site: Default-First-Site-Name
Forgot to mention, gave full rights with ADSIEDIT to DFSR-LocalSettings for all server to Administrator and read permissions to "Authenticated Users"
DFSRDIAG POLLAD throws following error
c:\Dfsrdiag pollad /verbose
[INFO] Computer Name: BACKUP-SERVER
[INFO] Computer DNS: Backup-Server.mydomain.COM
[INFO] Domain Name: mydomain
[INFO] Domain DNS: mydomain.COM
[INFO] Site Name: Default-First-Site-Name
[INFO] Connected to WMI services on computer: Backup-Server.mydomain.COM
[INFO] Invoke PollDsNow() method on Backup-Server.mydomain.COM
[ERROR] PollDsNow method executed unsuccessfully. ReturnValue: 12 (0xc)
[ERROR] Failed to execute PollAD command Err: -2147217407 (0x80041001)
Can anyone point me to any direction which can lead to resolution of this ERROR and make DFS_R work..
Thanks
bikram

Hi,
It seems that DCPROMO did its work without complaints, still the DFSR references remained in AD. You could refer to the article below to clean up the DFS Replication object.
How to remove data in Active Directory after an unsuccessful domain controller demotion
http://support.microsoft.com/kb/216498
In additional, please refer to the following thread to troubleshoot the issue:
DFS is not working anymore.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

C170 Ironport error "The query domain.name.accept failed

Dear Community,
I have two Cisco C170 Ironport devices. Each is throwing the following error:
"The query <domain.name.accept> failed with result inquiry timed out."
I have been unable to decipher it and was hoping anyone might possibly have a clue to look for the resolution.
I would be very grateful Community.
Thanks.
Rocky

Hey Rocky,
This seems to be an error on an LDAP accept query that is configured on the appliance.
If you have indeed created an LDAP accept query, please check connectivity from the appliance to your AD servers currently set.
Please go to GUI > System Admin > LDAP
Here you can check connectivity to the AD servers and also run a test accept query.
Please attempt these tests and let us know the results.
Judging from the error, I am assuming that the LDAP accept query test will fail resulting in a time out, if it does this usually indicates either the AD server was not properly setup on the appliance, if so, you will need to ensure that your firewalls if any are in place is allowing the query traffic from the appliance to the AD server
Please let us know.
Regards,
Matthew

CMC initialization of the GroupWise domain database failed (d705)

Similar Messages

Maybe you are looking for