CMC Services won't run - CR XI

Post Author: peachpx
CA Forum: Authentication
Hi -
I just installed CR Server XI and none of the CMC services (CR Page Server , Destination Job Server, Event Server etc) are running and I can not make them to start.
Please help.

Post Author: SKodidine
CA Forum: Authentication
check out this post.
http://technicalsupport.businessobjects.com/cs/forums/thread/6778.aspx

Similar Messages

Network Diagnostic Service won't run, Symantec turned off, yellow triangles by all network devices

We have a Lenovo laptop that suddenly cannot connect to the network (Windows 2008 R2 domain). The o/s is Windows 7 Pro 64 bit. The system tray icon shows that no network connections are available. When I run the troubleshooter, Windows detects that the Network
Diagnostic Service is not running, and when the troubleshooter attempts to fix it, nothing happens.
Looking in Device Manager, I see a Realtek LAN card, a Cisco wireless card, Teredo Tunneling adapter, and 5 WAN miniports. All are showing a yellow triangle. Under Unknown Devices, I have one device with a question mark and 5 with yellow triangles. I tried
uninstalling/reinstalling the network adapters, but it made no difference.
In addition, I got a message yesterday in the Action Center that Symantec Endpoitn Protection and Windows Firewall were both turned off. This made me suspect malware, but a Malwarebytes scan did not turn up anything. I am now trying a scan in Safe mode.
I've googled this extensively and have seen articles about Teredo Tunneling issues and Network Diagnostic Service issues, but I am not sure of the root of my problem. I don't want to try registry edit solutions or uninstall anything else if those solutions
are not my specific issue.
Any help appreciated.

Hello Peg2011,
Have you made any changes before the laptop can’t connect to the network?
Please take the following steps for troubleshooting:
1. Update the network cards drivers from the manufacturer website
2. If you still can’t connect to the network, please run the command ipconfig /all to check if the IP information is right and share us the result.
As this issue occur suddenly, you could try to use the system restore to return your PC's system files and programs to a time when everything was working fine.
For more information about system restore, please take a look at the following article.
http://windows.microsoft.com/en-hk/windows7/products/features/system-restore
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Automator - Service won't run

Hi,
i have a very simple automator worklflow that i'd like to use as a service.. the workflow is:
get specified finder items
copy finder items
It works fine when run via automator but fails as a sevice.. i've seen people with similar problems and the responses, as far as i can tell, have never offered a solution or even been clear on wether or not it's possible to make this type of workflow into a service.
so, is it possible to use those actions as a service? if so, how
thanks

hey red.. thanks.
i don't have anything selected prior to running the service.
basically, i have an app which i'm beta testing..
the template files are inside its .app/contents..
i have a custom template that i like to put in there.. if my file is in there, i can open it via the app with ⌘N..
when the beta is updated, the .app is overwritten with the new version and my template is no longer in it.
so, just looking to put a service accessible via the app that will get my template (which i keep in a specified location) and put a copy of it in the app contents.
i know there are quite a few other ways to accomplish this but i'd like it to be a service.

Control Panel won't open/Software License Service fails to run

I'm not sure what happened, I had left my computer on sleep for about 4 hours, I came back and I was getting these UAC messages even when I was opening elevated mode for task manager. Soon I realized my control panel won't open. After some googling, the problem was apparently linked to a service called Software License Service and it was either caused by virus(but I have avast..) or files that somehow got corrupted. I had: updated my system using Thinkvantage system update + did a system backup+ ran memtest86+ + turned off AMT + turned off Intel onscreen display. That's all I did before this happened.The error code I get when I try to start control panel through cmd is Error 34 (don't know what this means). And Software license service won't start.
*control panel opens fine in safe mode
*ran sfc, there were problems that 'couldn't be repaired'
1. Is there any way to fix this, ie is there a hotfix available or something I can just download and install?
2.Any idea what might have possibly caused this?
3. I did a quick restore using the backup I did and the problem was still not fixed. Will a full restore help or will I have to resort to factoy restore?
Thanks. *having so many problems with the new thinkpad + vista =/*
I have a T400(2764-CTO) 32 bit on vista business.
Message Edited by annayu22 on 07-17-2009 11:57 AM
Message Edited by annayu22 on 07-17-2009 12:27 PM

http://java.com/en/download/help/plugin_freeze.xml
http://www.google.com/search?num=100&hl=en&lr=lang_en&c2coff=1&q=java+%22control+panel+won%27t+open%22

CS3 installs but won't run

Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-N

Rob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is.

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

NSM3 service won't start anymore

Hi,
NSM AD 3.0.4 on W2008R2
has been running fine for months, now engine service won't start anymore.
engine.log from todays start:
01 2012-12-13 11:19:19 7200 1 0001 1452 1480 ML: Failed to initialize 1
or more components and/or subsystems. Engine is switching to
stop-pending state.
ideas?
sk

Sami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Java applets won't run on Safari???

I have reinstalled Java twice, and it still won't run any Java applets. It just sits there with the cup logo and the arrow on either side. It works fine on Firefox but not Safari. Help?

Hello
I'm piggy backing on this thread because I too have had problems with Java and Safari
Java runs fine for me in Firefox, however.
I went to a federal website
https://blrscr3.egs-seg.gc.ca/gol-ged/gov/browserdetection/BrowserCheck.html
that uses java and received this message
" Java applet unable to load
To use this service, you must either install a recent version of the Sun JVM or enable "Scripting of Java applets" if it has been disabled."
so i looked for an update and have downloaded and installed release 6, (at least, it said that it was installed, but have never been able to figure out where)
when I check Java preferences, the choices are J2SE 1.4.2 or J2SE 5, and when I've switched to 1.4.2 I still have no luck.
When i run firefox, i get the java console opening, but it doesn't open with safari, and I can't find the option for this to turn on in safari
i have restarted both safari and my computer and no luck. I have repaired permissions and no changes have taken place.
Any more suggestions?
(thank you, by the way)

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

AIR 4.0 captive runtime won't run: "requires a version of Adobe AIR" alert

I'm creating an AIR captive runtime application, and it won't run on a target Windows* machine. It displays the following alert instead:
This application requires a version of Adobe AIR which cannot be found. Please download the latest version of this runtime from http://www.adobe.com/go/getair, or contact the application author for an updated version.
How can I package the captive runtime differently so it won't display this message? The application is a pure ActionScript app compiled with the adt binary from the standalone SDK (this is not Flex).
In addition, I'm disturbed that a captive runtime AIR application pings Adobe in any way. I am seeing occasional pings to an adobe site upon launch of the app (something like airdownload2.adobe.com, if I remember correctly). No I'm not using any service calls in my app at this point in development, it's very simple, and should not be pinging the net at all. Why is this happening? I need to disable this too.
* Problem occurring only on a particular Windows 7 Home Premium 64-bit machine. Unfortunately, this is the end client's machine so I can't tinker with it.

Do you have access to the problematic machine? If so, maybe you could try to install Sysinternal's Process Monitor http://technet.microsoft.com/en-us/sysinternals/bb896645
Run the tool, create filter to see just events containing your app name and try to find in the result any issue... you could also compare the log with same log from not problematic machine or with app made with older SDK which was working.
That's all what I can do... it's a shame that nobody from Adobe is interested yet... maybe you could also submit a bug.

Programs won't run after update to 10.6.7

Hi
I have just inherited an early 2008 iMac following my Dad's death a few months ago. So I have no Mac experience at all. On receiving it, I booted it up and a list of recommended software updates appeared which I ran, and by all accounts successfully installed. One of them was an update to 10.6.7
Previous to the update I could access the installed programs. Now I can access barely any of them.
Error message reads:
Application name cannot open.
Check with the developer to ensure this version of application name works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS.
There aren't any further updates needed. Every time I check, I'm advised everything is uptodate. So last night I reinstalled iTunes, downloading the latest version. That won't run. Same error message.
I'm unsure what to do now. I don't have any disks etc at the moment as Mum is still trying to locate them (they had more than one property and this has come out of one that has been boxed up and put onto the market).

This is a typical error report. The section I have bolded out seems to be common in all the errors.
Process:         iTunes [500]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10221201~1
Code Type:       X86 (Native)
Parent Process: launchd [105]
Date/Time:       2011-05-11 06:38:32.490 +0100
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report:          15167 sec
Crashes Since Last Report:           305
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      DCCD367C-006F-4EEF-8457-3885D045DBBE
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDP725032GLA380, 298.09 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000

JavaService - can install java program into win2k service, but cannot run

i have a JavaService problem: i can install java program into win2k service, but cannot run
the version of javaservice is 2.0.7.0
the following is the message:
C:\DailyUpdate\dist>JavaService.exe -install DailyUpdate C:\Program Files\Java\j
dk1.5.0_05\jre\bin\client\jvm.dll -Djava.class.path=C:\DailyUpdate\dist\ftpbean.
jar;C:\DailyUpdate\dist\mysql-connector-java-3.0.10-stable-bin.jar;C:\DailyUpdat
e\dist\DailyUpdater.jar -Xms16M -Xmx64M -start DailyUpdateHandler -params C:\Dai
lyUpdate\dist -out C:\DailyUpdate\dist\logs\out.log -err C:\DailyUpdate\dist\lo
gs\err.log
The DailyUpdate automatic service was successfully installed
The DailyUpdate service is starting.
The DailyUpdate service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.

I might be doing some programming for my company soon
which will require a program to monitor a database
and whenever there is a change to certain fields, it
must copy certain fields into another database. When I see "whenever thiere is a change to certain fields" I tend to think "triggers" - but maybe this won't work for you 'cause of the "another database" part. And the fact that triggers are inherently evil.
[snip]
Is it possible to run a Java program as a windows
service? And if so then how would you go about it? I'd hit Google - there're a couple ways to do this.
[snip]
Also,...if I were to use one of those programs which
can make an .exe of a Java program, then do you still
require the JRE to be on the machine? It depends on how you did the conversion. If you compile to native then no, if you just wrap up a JRE then yes.
Why I ask is
that I occasionally get asked to do small development
projects for my company, but we are a microsoft
partner and therefore do all the development in C#
and the like. So I would like to just implement as
many things in Java as I can, just to show everyone
that Java can do exactly what C# can do. But its
difficult to convince people of this since I always
require the JRE and they dont. Of course, they require the .NET framework and you don't. And last I looked that thing was around 23 Meg.

Clownfish won't run

I am using WinXP and have installed Clownfish for Skype but it won't run.
I have uninstalled it and re-installed it multiple times but it still will never run.
Has anyone else had this problem and been able to fix it?
Thanks in advance.

try to visit their FAQ or Help pages - http://clownfish-translator.com
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Captivate 4 won't run

The Capitvate 4 demo won't run on my computer even though it
appears to install fine, and I'm stumped. Actually, the program
wouldn't launch after installation, then suddenly was able to
launch just once, then it wouldn't launch again. I get the splash
screen, and then nothing.
I've followed all of Adobe's troubleshooting advice and what
common sense I have: installed as an admin, installed in limited
mode, uninstalled, reinstalled, rebooting in between. I have
Windows XP service pack 3 with all the latest updates and my
computer is a Core2Duo with 1.5 GB of RAM.
Looking at the install logs, one seems to repeat itself three
times with putting files into directories, and each time ends with
the following text:
=== Logging stopped: 2/4/2009 17:52:24 ===
Installation result: 0
[ 3664] Wed Feb 04 17:52:24 2009 ERROR
Log of: object
isRunning {string}: 0
percentComplete {string}: 100
message {object}: [object Object]
Log of: object
code {string}: 0
args {object}: [object Object]
[ 3664] Wed Feb 04 17:52:26 2009 INFO
Any ideas would be appreciated.
Ted

Well I'm going to have to use my favorite F word here.
Frapdoodle!
Sorry that didn't help. About the only thing I can think of
to recommend is to submit a Bug Report.
Click
here to view the WishForm/Bug Reporting Form
Perhaps Adobe will pick up on it and contact you. You may
wish to try E-Mailing Support, but I've seen reports here that
Adobe Support is reluctant to assist with anything trial related.
Seems odd to me, but that's what I have heard.
The link to reach support is listed below:
Click here
Best of luck to you! Rick

JRE won't run on win2k

I have a couple of machines that are running win2k (service pack 3) that won't run any Swing applications. I have tried JRE versions 1.4.0, 1.4.1 and 1.3.1. All of them hang with a simple application that displays a JFrame only.
Has anyone ever had this problem? What did you do to solve it?

Thank you for your reply
The machine configuration is as follows:
This is a Premio Box (I've never heard of it)
-Intel Xeon/2.4ghz/512k Cache Socket 603 CPU
-512mb ecc ram
-80gb HD
-ATI Radion 7000 TV Out VGA Card
-Windows 2000 service pack 3

CMC Services won't run - CR XI

Similar Messages

Maybe you are looking for