Cmd-click in finder on title bar opens new window - why?

This is a feature I used all the time previously, but since I've updated to 10.5.2 it always open a new window when I select a dir further back. Does anybody know how I can make it not open a new window, just navigate in the existing window?

..."cmd-click in finder on title bar opens new window"...
Holding down the cmd key while opening a folder in the "Finder" has caused the folder to open in a new window for quite some time. I can't recall what the behaviour was with respect to the Titlebar in earlier OS X versions, but if it has really changed in 10.5, perhaps it was to make it more consistent with the behaviour of folders in general.
Are you sure you weren't using ctrl-click in the past?

Similar Messages

  • Firefox will not open new window, Why?

    I have Vista home base premium operating system. I am a regular user of Mozilla firefox after had lots of positive feedback as one of the best browser. I had no problem for a good while, until recently I found out my add-on firebug stop working. Then I noticed that firefox stopped working properly, ie; it will no more open new window/s. One window will open after rebooting and i can have a number of tabs opened. When I right click on a web link and take the option to open it in a new window it will not open. When I take the option to open it in a new tab then that would be ok. When I go to the toolbar and click on File and chose option "open new window" again it will not open. I have on many accasions completely installed Firefox using the IObit software and use the advance system care to clean the registry and completely scan the system. I then reinstalled the latest version of Mozilla Firefox. I did that twice. The problem is still there. About the ad-on firebug, when I go to the toolbar and click on Tools, i can see Firebug with the extended arrow, but when I click on the arrow to the extended options, it simply would not respond.
    There must something going on, please help.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Every each click on mp3, audio, video, photo open new window...

    hi
    i have problem with my KDE, when i open some folder with for example music... i have 100 track, and click on any one, KDE open window of player, good... but when i click on other file, KDE open NEW window of player, don't use currently open window but open new, same problem i have with video and photo files, and this not confortable to use because all the time i have to close first existing window of player before click on other file... maybe someone know how i can fix this problem ??
    thx

    its not work, same problem, dosent meter about player... in GNOME its fine, but only in KDE the problem existing.

  • Clicking the tab to the right of open window tab does not open new window. why?

    It used to do that, and it does for other desktops on computer, just not mine.

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Safari 5 Opens but no window comes up? Even after I click open new window.

    So i downloaded Safari 5 form the update and then from the full download install.
    My problem is...
    Safari opens.
    but no window opens.
    I go to the top I click safari and go down to "Open new window"
    Still nothing.
    I click to quit safari.
    It says "0,1,2,3 windows are open in safari do you want to quit anyway?"
    (depending on how many times I clicked to open a new window)
    but even tho it is sayign windows are open my computer doesnt show them anywhere.
    any help people?

    Hi,
    Try launching Safari from your Applicatioms folder instead of the Dock.
    If that doesn't help ...
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    Carolyn

  • Button on page opens new window, session times out in old window

    Hi,
    I've created a custom page and added a button through personalizations in Oracle that opens the new custom page in a new window. When this happens, though, the original window throws the following error when a user attempts to use any functionality in that page:
    Error: Cannot Display Page
    You cannot complete this task because you accessed this page using the browser's navigation buttons (the browser Back button, for example).
    More specifically, the new button has been added to a LOV page in Oracle. Navigation would be: Create timecards page, click on Task LOV button (this opens new window for Task LOV), new button is on this Task LOV page. The new button then opens the custom page, and when the user returns to the Task LOV page to select a task they receive the error.
    How do I prevent this error when the new custom page opens from the button?
    Thanks in advance for your help,
    Suzanne

    I have an update to this issue:
    I found that adding the value &retainAM=Y to the button URL for my custom page resolves the issue of the time-out in the Task LOV page. However, when I make the task selection in the LOV page and return to the main create timecard page, I find that the session has timed out on that page.
    Any suggestions?
    Thanks,
    Suzanne

  • Make start screen tiles open new window by default?

    let me preface this by saying "I like the windows 8 start screen and I don't miss the start menu."
    but.
    the default behavior for start screen tiles seems to be "take me to the open instance of this application."
    if I click the notepad tile to open notepad, it opens notepad. if I click the tile again, it takes me to that notepad I just opened the first time I clicked the tile. if I want to open two instances of notepad, I have to right-click the tile and then
    choose "open new window," which may or may not be on the complete opposite corner of the screen from my notepad tile.
    for what it's worth, this was not the behavior in the old start menu.
    is there a registry hack or group policy I can put in to say "start tiles always open a new instance of desktop apps"? I use two monitors and have a lot of things open. sometimes I might not even remember that I have notepad (or remote
    desktop, or excel, or powershell) running until I've already clicked the tile "again" instead of right-clicking and choosing "open in new window." this may seem like a minor thing, but it just seems like something I should have a *choice*
    on.
     the unfortunate flip side of this is that the new dual-monitor taskbar does what exactly what I want the start screen to do, but what I DON'T want the taskbar to do. that is, if I:
    A. have a outlook pinned to the taskbar on my primary monitor
    B. have outlook open on my second monitor
    C. click the pinned outlook icon on the first monitor
    windows opens a new instance of outlook instead of just taking me to the open instance. and as if to twist the knife and say "i'm doing this wrong on purpose," it opens this new instance on the second monitor, right in front of the first
    instance.
    so the start screen knows if outlook is open on either monitor, but the taskbar on monitor1 doesn't know/care if outlook is open on monitor2.
    (any of this addressed in 8.1?)

    For those domain administrators need to push this to multiple users, but don't want to change the registry setting on each and every users (could be hundreds, or even thousands of them), here is a GPO template I made so you can push the registry change
    to selected domain users and groups.
    Just paste the following into an ADM file (i.e. AlwaysLaunch.adm) and then create a new GPO and import it under
    Administrative Templates, then apply the GPO to the domain users and groups that you want to apply this behavior to.
    CLASS USER
    CATEGORY !!CustomBehavior
     KEYNAME "SOFTWARE\Microsoft\Windows\CurrentVersion\ImmersiveShell\Launcher"
     POLICY !!AlwaysLaunchNewInstance
      EXPLAIN !!AlwaysLaunchNewInstanceHelp
      PART !!AlwaysLaunchNewInstance DROPDOWNLIST REQUIRED
       KEYNAME "SOFTWARE\Microsoft\Windows\CurrentVersion\ImmersiveShell\Launcher"
       VALUENAME "DesktopAppsAlwaysLaunchNewInstance"
       ITEMLIST
        NAME !!Disabled VALUE NUMERIC 0
        NAME !!Enabled VALUE NUMERIC 1 DEFAULT
       END ITEMLIST
      END PART
     END POLICY
    END CATEGORY
    [strings]
    CustomBehavior="Custom Behavior Settings"
    AlwaysLaunchNewInstance="Always Launch New Instance When Running An App"
    Enabled="Enabled"
    Disabled="Disabled"
    ; explains
    AlwaysLaunchNewInstanceHelp="When running a new application, normally it will go to an existing one if it is already open.  Most of the time this is undesirable, and you want a new instance to run."

  • I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

    I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx

    You may have more of a chance getting a quicker answer here:
    https://discussions.apple.com/community/windows_software/windows_compatibility

  • Ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut of wacom pen click, i now have to click on the image title bar, how can i fix this please?

    ps cs6 on mac. since installing yosemite, when working on an image if i want to change tool, via shortcut or wacom pen click, i now have to click on the image title bar, how can i fix this ?

    @Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
    UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
    Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
    You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
    Exit out of Outlook and reboot your machine.
    Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
    Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
    IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
    You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
    Everything should now sync pretty seamlessly.
    I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
    Arthur P. Johnson

  • Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)

  • Finder Windows always open new windows when clicking subfolders

    since i upgraded to 10.5.6, my finder windows only open new windows when I click on a subfolder. this is no matter what I do with the setting in preferences.
    Also, my finder windows no longer display the side bars with folder icons.
    I searched my library (and whole computer) for the finder preferences .plist file and can't find it. (was going to delete it and re-create it).
    Any ideas here?

    Thanks for the star.
    The default of Finder’s Find will not search that folder, but you can change the pulldown menu just beneath where it says Search, from Kind to System files by selecting Other from that menu and then scroll down the next window and check the box next to System files. You’ll then need to change the pulldown menu next to that to “include” instead of “don’t include.”
    The next time you do a search using Find, that pulldown menu will have System files as an option, if you think you might want to search for something in your home folder.

  • Finder won't stay selected if other programs open and can't open new window

    I have just noticed a new problem. If other programs are open, Finder won't stay selected program. If I alt tab to it or click on it in dock, it shows on menu bar for a half second and goes away. If I right click on icon in dock and select open new window, it will not do so. If I select a folder from the desktop, it opens in Finder with no problem and I can move within the Finder at will.
    I have updated all software. I am running the current Macbook Pro 15in. No other problems noted so far.
    Any ideas? Thanks in advance

    Hi Sleddaddyfro, and a warm welcome to the forums!
    Do you have another account you can log into?
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Stuffit AVR has been a big one, if you have that use the Pref Pane to turn it off, but others have been implicated too. Check System Preferences for a Stuffit Pref Pane and disable AVR.

  • IE 11 open new tab opens new window, clicking open new tab opens black page in same tab

    Hi I have a problem with IE11 on Windows 8.1 Desktop mode which is driving me crazy.
    When i click on the open new tab button it will open in the same tab in the same window and you cant go to any website and the website on where on's address is still in the address bar.
    Right click a link and select open new tab most of the time opens new window with long pause.
    I have tried everything to fix this even re installing windows, but the problem persists after re install as i think its attaching itself to my Microsoft account.
    I have disabled all add-ons run virus and walware scans reset IE to defaults removed and re-installed IE all to no avail!
    Any help would be much appreciated.

     tried everything
    http://support.microsoft.com/en-us/kb/2574731
    (BING search for
        blank tab regsrv32 ieproxy site:support.microsoft.com
    Robert Aldwinckle

  • How to stop Finder from opening new windows to view contents of folders.

    I have 2 folders on my desktop, called "Home" and "Work." Both are aliases to files stored in user/documents on my HD. Both contain many folders within folders within folders and, ultimately, documents. When I double click on the "Home" desktop alias, a finder window opens showing contents. When I click on any folder within that window, it does what I want it to...switches to the contents of that folder (within same window, without opening a new one.) This works for everything in that folder.
    When I double click on a folder within the "Work" folder, however, it opens a new window at every level. By the time I get to the document I want, I may have 5 or 6 windows open, which I then have to manually close.
    I have gone into Finder/Preferences/General and the "Always open new window" box is NOT checked. Any one know why it would still be doing this? (No new applications are opening when I click on the folders, just a new finder window.) And why would it do it for one desktop folder and not the other?
    I looked through discussions till my head spun and only saw the Finder/Preferences fix, so I'm hoping there's another fix, like a preference file somewhere that I just need to trash. Any help would be appreciated.
    Powerbook G4   Mac OS X (10.3.9)  

    I don't know if this is the problem, but for windows in "Icon" or "List" view that are set so that the "Toolbar" is not showing, a folder opened within that window will tend to open a new window. This is just a difference in behaviour between the two modes. To show / hide the toolbar, try clicking the elongated button in the upper right corner, in the "titlebar" of the window, or choose "Show Toolbar" / "Hide Toolbar" from the "View" menu.
    Additionally, a workaround might be to switch to "Column" view ("View" > "as Columns" ⌘3), since opening a folder within a window in "Column" view does not appear to spawn a new window, even with the "Toolbar" hidden. Another option might be to hold down the "option" key while opening the folder - this causes the previous window to close as the new window is opened.

  • Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar

    Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar.
    i already tired complete uninstall and reinstall, but the options are still missing.
    print scr: http://www.freeimagehosting.net/9znkp
    Thank You in advance for help. Best regards

    Hello,
    ''jstavene wrote:''
    can find nothing under the tools menu for private browsing?
    Then it's not the same issue.
    If Firefox is set to '''Never remember history''', then you're in “permanent private browsing” mode, in which case the menu item ''Stop Private Browsing'' will be grayed out. Perhaps that's the case, and you don't find the menu item easy to see?
    * [[Settings for privacy, browsing history and do-not-track]]
    If that's not the case, then menu items can be hidden using the userChrome.css file. Check if it exists, and if it's there, rename it, then restart Firefox.
    * http://kb.mozillazine.org/UserChrome.css
    In Firefox Nightly (what will become Firefox 20), per-window private browsing has been added, so the menu item under the Tools menu is gone. It's been replaced by New Private Window under the File menu. I don't suppose it's very likely that you're using such a cutting-edge test version of Firefox though.
    If that doesn't solve the problem, since it's a different issue, it would be best if you would ask a new question.
    * https://support.mozilla.org/questions/new

Maybe you are looking for

  • What is he use of TIMED_TRIGGER ui element?

    Hi all, can u tell me what is the use of TIMED_TRIGGER ui element and why we will use it. and in which scenarios we will use this ui element regards naveen Moderator Message: I have no idea what you are playing at but you have asked the same question

  • Query related to workflows mail message text

    Hi, My problem is related to text chosen for Error mail unknown. An Error mail is fired in the workflow, now the text for E-Mail in English is coming correctly, But for FR language it is not seen properly. Now My query is where this mail text is main

  • How to set a query of VO in  Best-Effort Mode

    Hi, I'm using auto refresh property of VO, to refresh the LOV . But i get " java.sql.SQLException: ORA-29983: Unsupported query for Continuous Query Notification" error.. So i want to set the query in best-effort-mode . May i know how to set it. here

  • SQL (Injection) Vs Flat File TXT Vs XML (XPath Injection) For Database.

    I will have to deal with robust login sessions so I need some advice on what type of database and language I will use. PHP and MySQL is the choice but I hear that flat file TXT are more faster so I am thinking about Perl. Perl is very flexiple and ha

  • Windows XP-Why do I get a message saying Error: Failure to Register?

    I have tried and tried to install the latest version of flash player, it will say downloading all the way up to 100%. Then it will give me an error message saying Error: Failed to Register. I have went through all the trouble shooting steps on the ad