CMD Space and CMD {RIGHT}/{LEFT} have stopped working as config- any ideas?

I have CMD Space set to open Spotlight - set in Preferences/Keyboard&Mouse/Keyboard Shortcuts
Used to work but stopped over the last couple of days.
Also, I have set the Spaces to switch on a CMD {Right} or {Left} cursor. this has stopped too.
Have confirmed both are set in preferences.
Have done a reboot.
Keys still not working.
Any suggestions. Failing that I'll just live with it until I put SL on it.
Ta

Here was my solution to this. My left click button on both the trackpad and touch pad suddenly stopped working on me. After putting up with this for a few weeks I decided to investigate. I found if I disabled the touch pad the trackpad left click would start to work again. So I investigated by carefully popping off the left click button for touchpad. Everything looked normal, so I investigated a little father buy removing the small round blueish rubber piece in the middle of the button. Once I did this I realized it quite dirty, with a soft cloth and a toothpick I cleaned both the contacts on the PC and the the black spot on the rubber piece, putting everything back together and my left click worked once again.
The cause of my problem was just a build up of dirt under the rubber contact which caused the button to short out and disable itself.
I didn't have to reinstall any software or drivers.

Similar Messages

Lenovo Thinkpad T420 trackpad and touchpad right/left click stopped working

So I have had a very... VERY... irritating problem with my Thinkpad.
For the first 6 or so months I had the laptop it worked fine. Then, the left click on the touchpad was functioning like the right click (bringing up a menu).
I immediately disabled the touchpad and then used the trackpad right and left clicks which worked perfectly.
After another 4 or 5 months, those buttons stopped working altogether. I could still use the touchpad to move the arrow, but I couldn't click on anything.
I bought an external USB mouse and that worked fine for another 2 months. Then for a few weeks, it would work on and off. I'd have to wiggle it around in the USB ports to get the laptop to recognize it. (it had nothing to do with the ports... there were 3 of them and they all worked fine).
Then it stopped working completely, AND, my laptop refuses to acknowledge ANY USB I plug in.
I have run out of options now. I can't even install anything, download any files from lenovo website. I can't do anything. Does anyone know if it is still salvageable? Has anyone had the same problem?
The lenovo digitizer for tablets.... would that work for this thinkpad? (sorry... not as tech savvy as the rest of you)
Thanks a bunch,
Amanda

Here was my solution to this. My left click button on both the trackpad and touch pad suddenly stopped working on me. After putting up with this for a few weeks I decided to investigate. I found if I disabled the touch pad the trackpad left click would start to work again. So I investigated by carefully popping off the left click button for touchpad. Everything looked normal, so I investigated a little father buy removing the small round blueish rubber piece in the middle of the button. Once I did this I realized it quite dirty, with a soft cloth and a toothpick I cleaned both the contacts on the PC and the the black spot on the rubber piece, putting everything back together and my left click worked once again.
The cause of my problem was just a build up of dirt under the rubber contact which caused the button to short out and disable itself.
I didn't have to reinstall any software or drivers.

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I'm using OS 10.91 and lately slide shows on some news websites and audio on Amazon have stopped working. Que pass?

I'm using OS 10.91 and lately slide shows on some news websites and audio on Amazon have stopped working. Que pasa?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

I have an hp dv6910us and the system speakers have stopped working. I cannot reinstall the driver.

I have an hp pavilion dv6910us and the speakers have stopped working and no longer show as installed as a device. I have tried reinstalling the audio device driver, but the hp website does not list a driver for my specific laptop.
Right now it shows that I have a bluetooth audio device installed. I have never installed this device and don't know where it came from.

I had the exact same problem, updating updating the Mbox 2 drivers on the Avid website has fixed the problem.
http://avid.force.com/pkb/articles/en_US/Download/Mbox-2-Drivers?retURL=%2Fpkb%2 Farticles%2Fen_US%2FDownload%2FMbox-2-Drivers&popup=true

Cmd+right shortcut has stopped working

Ever since updating to Snow Leopard from Leopard, the Cmd+right arrow built-in shortcut to go to the end of a line of text has stopped working. This used to work in most applications, now it doesn't work at all.
I don't see anything in System Prefs > Keyboard > Shortcuts that is overriding it, and I haven't installed any applications different from when I was on Leopard. Cmd+left arrow shortcut is still working too, which makes this even weirder.
Any suggestions as to where I would start to troubleshoot this?

I'd hazard the guess at this moment that it isn't hardware related, but don't discount that until you test with a USB keyboard perhaps.
I hate to say it, but there seem to be a number of things like this lately with reports of the issue mysteriously clearing itself shortly thereafter. I'm not trying to bucket shop a load of pixie dust, so please don't make any plans around this particular summation

The new field blur and tilt shift filters have stopped working

The new field blur and and tilt shift filters worked a few times but are now greyed out in the menus. Any ideas why? Thanks.

Did you check the settings Chris mentioned? Your issue sounds like there might be a video card or driver issue, which can disable the GPU related features and give you a lesser version of the blur filters. See this link for some troubleshooting suggestions. See if issues with the video card have disabled - Edit>preferences>performance use graphics processor. Also check the advanced settings drawing modes. Be sure you have the current driver (system is updated and current on mac or go to the video manufacturer's website for pc) . That is often the cure.
You might want to copy your system information (photoshop help>system info) here for us to look at.
Pattie

I recently deleted a partition on my mac that was intended to install windows. Now it is just blank space. I attempt to resize my Macintosh HD partition to cover entire hard drive space and hit apply but nothing happens (disk utility). Any ideas?

I have a few problems...
I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?

Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

HT1414 My WiFi want work - tried turning off and restarting and did not work. Tried resetting All Settings and that did not work. Followed Apple Restoring iOS Software and that does not get it working. Help any ideas !!!

Anyone help,
My WiFi stays off, have tried turning off: did not work. tried Restoring settings and that did not work. Downloaded iSO 6.1.3 and it still want work. Any ideas!!

same my iphone also did not work i tried to restore but its not coonected to the internet.pls i need your help too.

Hi, I've got a Mac OS X, and recently online videos have stopped working. The audio still kind of works, but the screen just goes into a kind of spasm! Any advice? Cheers!

I have noticed this with youtube and other sites, but things like skype calls still work fine.

Not much to go on, but is it the whole screen spasming, or just the window with the video?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

I've purchased two standard movies from iTunes and they started downloading then stopped saying download error any ideas on what to do??????? Help please!!

I've purchased two standard movies from the iTunes store and they both started to download very quickly and then out of the blue, they stopped and the message for both read as follows: error try again....now, no matter how many times I try again, neither of these movies will complete the downloading process before that same message pops up again!!!! It's making me so aggravated!!! Someone please help!!! I've spent good money on these vids.....what do I do???

Try to download them in iTunes on your computer. Connect your iPad to your computer and launch iTunes. Click on your iPad name on the left side of iTunes and then from the menu at the top of the screen go to Store>Check for Available Downloads. You should be taken to another screen where the incomplete downloads can finish and then you can sync them to your iPad.

Music on external drive. Use I Tunes to organize. Stream to TV and home stereo through Mac Book and Apple TV. Updated to Mavericks operating system. Now Many times art does not match song or music stops playing altogether. Any ideas ?

I have music on external G drive. Use I Tunes to organize and play music. Stream it to my TV and home stereo using MacBook and Apple TV. Just updated operating system to Mavericks. Now have two issues when playing music. 1) Many times album art displayed on TV will not match song playing, and 2) Music will just stop altogether sometimes. Any ideas ?

Agreed! This bug with the ringtone delay (№4.1) is really annoying

I have a 16gb ipod 5 and it took all of my space and I'm left with 2.9

I have a 16gb ipod 5 and it took all of my space and I'm left with 2.9

Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

My-space-bar-and-delte-button-have-stopped-working

My-keyborad-spacebar-and-delete-button-have-stopped-working.Any-suggestions

I don't suppose you have an external keyboard. If you do, test it. If not, try booting in safe mode (shift key down at startup.)

My Imac The DVD drive have stopped working, the DVD goes in, the computer read it and it comes out again ..

My Imac The DVD drive have stopped working, the DVD goes in, the computer read it and it comes out again ..
Sofaware is: OS X 10.8.5 (12F37)
Can anybody please help, or would I need to buy a new drive?

Have you tried one of those CD cleaning Discs yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

CMD Space and CMD {RIGHT}/{LEFT} have stopped working as config- any ideas?

Similar Messages

Maybe you are looking for